From mboxrd@z Thu Jan 1 00:00:00 1970 From: Vaibhav Hiremath Subject: [PATCH-v2 0/7] mmc: sdhci-pxav3: Enable support for PXA1928 SDCHI controller Date: Mon, 7 Sep 2015 16:48:34 +0530 Message-ID: <1441624721-15612-1-git-send-email-vaibhav.hiremath@linaro.org> Mime-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: QUOTED-PRINTABLE Return-path: Sender: linux-mmc-owner@vger.kernel.org To: linux-mmc@vger.kernel.org Cc: linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, robh+dt@kernel.org, ulf.hansson@linaro.org, Vaibhav Hiremath List-Id: devicetree@vger.kernel.org PXA1928 SDHCI controller has few differences, for example, PXAxxx PXA1928 =3D=3D=3D=3D=3D=3D =3D=3D=3D= =3D=3D=3D=3D SDCLK_DELAY field 0x10A 0x114 SDCLK_DELAY mask 0x1F 0x3FF SDCLK_DELAY shift 9 8 SDCLK_SEL shift 8 2 (SEL1) So this patch series introduces new compatible device_id (marvell,pxav3-1928-sdhci), and makes use of .data for handling such differences. The series also adds support like, - independent ->set_clock() api, as we need to enable internal clock g= ate and TX clock - pinctrl configuration based on bus speed. - introduce new quirk SDHCI_QUIRK2_MUST_SET_SDHCI_BUS_POWER SD_BUS_POWER & SD_BUS_VLT bit-fields are used internally to gate the clocks, so it is important to configure them as part of ->set_power(= ) More detailed description is written into commit log. - Enable SDHCI_QUIRK_BROKEN_TIMEOUT_VAL for PXA1928 device_id - Enable SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON quirk for pxa1928 device V1 =3D> V2: =3D=3D=3D=3D=3D=3D=3D=3D=3D - Fixed typo issue (residual change remained by mistake) - Added new patch updating DT binding document for pxa1928 support - Added new patch enabling CARD_ON_NEEDS_BUS_ON for pxa1928 device Testing: I have done basic testing on both eMMC and SD card on PXA1928 based platform. Note: I tried to made sure that I do not break any other platform, whic= h used sdhci, except HS200 configuration.=C2=B7 Unfortunately I do not have access to any other datasheets, where I can cross check the details on HS200 bit-fields. Probably someone who has access can confirm [PATCH 4/5], whether it impacts other platforms. Kevin Liu (1): mmc: sdhci-pxav3: Fix HS200 mode support Vaibhav Hiremath (6): mmc: sdhci-pxav3: Enable pxa1928 device support mmc: sdhci-pxav3: binding: Add pxa1928 compatible support mmc: sdhci-pxav3: Add platform specific set_clock ops mmc: sdhci-pxav3: Add pinctl setting according to bus clock mmc: sdhci: add new quirk for setting BUS_POWER & BUS_VLT fields mmc: sdhci: enable SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON for pxa1928 .../devicetree/bindings/mmc/sdhci-pxa.txt | 2 +- drivers/mmc/host/sdhci-pltfm.c | 4 + drivers/mmc/host/sdhci-pxav3.c | 168 +++++++++++++= ++++++-- drivers/mmc/host/sdhci.c | 3 +- drivers/mmc/host/sdhci.h | 2 + 5 files changed, 165 insertions(+), 14 deletions(-) --=20 1.9.1