* [PATCH 0/4] ARM: dts: update Boundary Devices boards support
@ 2015-09-07 16:57 Gary Bisson
[not found] ` <1441645069-27263-1-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
0 siblings, 1 reply; 46+ messages in thread
From: Gary Bisson @ 2015-09-07 16:57 UTC (permalink / raw)
To: devicetree-u79uwXL29TY76Z2rM5mHXA
Cc: shawn.guo-QSEj5FYQhm4dnm+yROfE0A, kernel-bIcnvbaLZ9MEGnE8C9+IrQ,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A,
fabio.estevam-KZfg59tc24xl57MIdRCFDg,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-lFZ/pmaqli7XmaaqVzeoHQ,
troy.kisky-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR, Gary Bisson
This series is a follow-up to the previous series that added LCD display
support.
http://lists.infradead.org/pipermail/linux-arm-kernel/2015-August/364425.html
This one aims at adding touchscreen and WiFi support for Nitrogen6x as well as
adding two boards: Nitrogen6_Max and Nit6xlite.
The series has been tested against linux-next tag next-20150903.
Regards,
Gary
Gary Bisson (4):
ARM: dts: imx6dql-nitrogen6x: add touchscreen support
ARM: dts: imx6qdl-nitrogen6x: add wifi wl1271 support
ARM: dts: imx: add Boundary Devices Nitrogen6_Max board
ARM: dts: imx: add Boundary Devices Nitrogen6_Lite board
arch/arm/boot/dts/Makefile | 2 +
arch/arm/boot/dts/imx6dl-nit6xlite.dts | 21 ++
arch/arm/boot/dts/imx6q-nitrogen6_max.dts | 25 ++
...6qdl-nitrogen6x.dtsi => imx6qdl-nit6xlite.dtsi} | 419 +++++++++++----------
...-nitrogen6x.dtsi => imx6qdl-nitrogen6_max.dtsi} | 388 ++++++++++++++++---
arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi | 71 ++++
6 files changed, 666 insertions(+), 260 deletions(-)
create mode 100644 arch/arm/boot/dts/imx6dl-nit6xlite.dts
create mode 100644 arch/arm/boot/dts/imx6q-nitrogen6_max.dts
copy arch/arm/boot/dts/{imx6qdl-nitrogen6x.dtsi => imx6qdl-nit6xlite.dtsi} (60%)
copy arch/arm/boot/dts/{imx6qdl-nitrogen6x.dtsi => imx6qdl-nitrogen6_max.dtsi} (60%)
--
2.5.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 46+ messages in thread[parent not found: <1441645069-27263-1-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>]
* [PATCH 1/4] ARM: dts: imx6dql-nitrogen6x: add touchscreen support [not found] ` <1441645069-27263-1-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org> @ 2015-09-07 16:57 ` Gary Bisson [not found] ` <1441645069-27263-2-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org> 2015-09-07 16:57 ` [PATCH 2/4] ARM: dts: imx6qdl-nitrogen6x: add wifi wl1271 support Gary Bisson ` (5 subsequent siblings) 6 siblings, 1 reply; 46+ messages in thread From: Gary Bisson @ 2015-09-07 16:57 UTC (permalink / raw) To: devicetree-u79uwXL29TY76Z2rM5mHXA Cc: shawn.guo-QSEj5FYQhm4dnm+yROfE0A, kernel-bIcnvbaLZ9MEGnE8C9+IrQ, robh+dt-DgEjT+Ai2ygdnm+yROfE0A, fabio.estevam-KZfg59tc24xl57MIdRCFDg, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, linux-lFZ/pmaqli7XmaaqVzeoHQ, troy.kisky-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR, Gary Bisson This patch adds the different touchscreens that can be connected using the displays available for this board. http://boundarydevices.com/product-category/displays/ Signed-off-by: Gary Bisson <gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org> --- arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi index ad16dce..ec9da5e 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi @@ -284,6 +284,22 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c3>; status = "okay"; + + egalax_ts@04 { + compatible = "eeti,egalax_ts"; + reg = <0x04>; + interrupt-parent = <&gpio1>; + interrupts = <9 2>; + wakeup-gpios = <&gpio1 9 0>; + }; + + ft5x06_ts@38 { + compatible = "edt,edt-ft5x06"; + reg = <0x38>; + interrupt-parent = <&gpio1>; + interrupts = <9 2>; + wakeup-gpios = <&gpio1 9 0>; + }; }; &iomuxc { -- 2.5.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply related [flat|nested] 46+ messages in thread
[parent not found: <1441645069-27263-2-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>]
* Re: [PATCH 1/4] ARM: dts: imx6dql-nitrogen6x: add touchscreen support [not found] ` <1441645069-27263-2-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org> @ 2015-09-08 6:58 ` Philipp Zabel [not found] ` <1441695483.3241.5.camel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org> 0 siblings, 1 reply; 46+ messages in thread From: Philipp Zabel @ 2015-09-08 6:58 UTC (permalink / raw) To: Gary Bisson Cc: devicetree-u79uwXL29TY76Z2rM5mHXA, fabio.estevam-KZfg59tc24xl57MIdRCFDg, linux-lFZ/pmaqli7XmaaqVzeoHQ, troy.kisky-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR, robh+dt-DgEjT+Ai2ygdnm+yROfE0A, kernel-bIcnvbaLZ9MEGnE8C9+IrQ, shawn.guo-QSEj5FYQhm4dnm+yROfE0A, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r Hi Gary, Am Montag, den 07.09.2015, 18:57 +0200 schrieb Gary Bisson: > This patch adds the different touchscreens that can be connected using > the displays available for this board. > http://boundarydevices.com/product-category/displays/ > > Signed-off-by: Gary Bisson <gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org> > --- > arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi | 16 ++++++++++++++++ > 1 file changed, 16 insertions(+) > > diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi > index ad16dce..ec9da5e 100644 > --- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi > +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi > @@ -284,6 +284,22 @@ > pinctrl-names = "default"; > pinctrl-0 = <&pinctrl_i2c3>; > status = "okay"; > + > + egalax_ts@04 { > + compatible = "eeti,egalax_ts"; > + reg = <0x04>; > + interrupt-parent = <&gpio1>; > + interrupts = <9 2>; Please use IRQ_TYPE_EDGE_FALLING here. > + wakeup-gpios = <&gpio1 9 0>; And that would be GPIO_ACTIVE_HIGH. Should this be changed to GPIO_ACTIVE_LOW instead? From other device tree files and from what the driver does, it looks as if a wakeup is issued by forcing a falling edge on the IRQ pin. > + }; > + > + ft5x06_ts@38 { > + compatible = "edt,edt-ft5x06"; > + reg = <0x38>; > + interrupt-parent = <&gpio1>; > + interrupts = <9 2>; IRQ_TYPE_EDGE_FALLING > + wakeup-gpios = <&gpio1 9 0>; GPIO_ACTIVE_HIGH > + }; > }; best regards Philipp -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 46+ messages in thread
[parent not found: <1441695483.3241.5.camel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>]
* Re: [PATCH 1/4] ARM: dts: imx6dql-nitrogen6x: add touchscreen support [not found] ` <1441695483.3241.5.camel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org> @ 2015-09-08 13:12 ` Gary Bisson 0 siblings, 0 replies; 46+ messages in thread From: Gary Bisson @ 2015-09-08 13:12 UTC (permalink / raw) To: Philipp Zabel Cc: devicetree-u79uwXL29TY76Z2rM5mHXA, Fabio Estevam, Russell King, Troy Kisky, Rob Herring, Sascha Hauer, Shawn Guo, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r Hi Philipp, On Tue, Sep 8, 2015 at 8:58 AM, Philipp Zabel <p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org> wrote: > Hi Gary, > > Am Montag, den 07.09.2015, 18:57 +0200 schrieb Gary Bisson: >> This patch adds the different touchscreens that can be connected using >> the displays available for this board. >> http://boundarydevices.com/product-category/displays/ >> >> Signed-off-by: Gary Bisson <gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org> >> --- >> arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi | 16 ++++++++++++++++ >> 1 file changed, 16 insertions(+) >> >> diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi >> index ad16dce..ec9da5e 100644 >> --- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi >> +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi >> @@ -284,6 +284,22 @@ >> pinctrl-names = "default"; >> pinctrl-0 = <&pinctrl_i2c3>; >> status = "okay"; >> + >> + egalax_ts@04 { >> + compatible = "eeti,egalax_ts"; >> + reg = <0x04>; >> + interrupt-parent = <&gpio1>; >> + interrupts = <9 2>; > > Please use IRQ_TYPE_EDGE_FALLING here. > >> + wakeup-gpios = <&gpio1 9 0>; > > And that would be GPIO_ACTIVE_HIGH. Should this be changed to > GPIO_ACTIVE_LOW instead? From other device tree files and from what the > driver does, it looks as if a wakeup is issued by forcing a falling edge > on the IRQ pin. You're right it should be GPIO_ACTIVE_LOW instead for both nodes. I'll update it for v2 and track down the hardcoded values for the 2 boards this series adds. Thanks for the feedback. Regards, Gary -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 46+ messages in thread
* [PATCH 2/4] ARM: dts: imx6qdl-nitrogen6x: add wifi wl1271 support [not found] ` <1441645069-27263-1-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org> 2015-09-07 16:57 ` [PATCH 1/4] ARM: dts: imx6dql-nitrogen6x: add touchscreen support Gary Bisson @ 2015-09-07 16:57 ` Gary Bisson 2015-09-07 16:57 ` [PATCH 3/4] ARM: dts: imx: add Boundary Devices Nitrogen6_Max board Gary Bisson ` (4 subsequent siblings) 6 siblings, 0 replies; 46+ messages in thread From: Gary Bisson @ 2015-09-07 16:57 UTC (permalink / raw) To: devicetree-u79uwXL29TY76Z2rM5mHXA Cc: shawn.guo-QSEj5FYQhm4dnm+yROfE0A, kernel-bIcnvbaLZ9MEGnE8C9+IrQ, robh+dt-DgEjT+Ai2ygdnm+yROfE0A, fabio.estevam-KZfg59tc24xl57MIdRCFDg, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, linux-lFZ/pmaqli7XmaaqVzeoHQ, troy.kisky-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR, Gary Bisson Signed-off-by: Gary Bisson <gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org> --- arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi | 55 +++++++++++++++++++++++++++++++ 1 file changed, 55 insertions(+) diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi index ec9da5e..7a2830e 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi @@ -65,6 +65,19 @@ pinctrl-0 = <&pinctrl_can_xcvr>; gpio = <&gpio1 2 GPIO_ACTIVE_LOW>; }; + + reg_wlan_vmmc: regulator@4 { + compatible = "regulator-fixed"; + reg = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wlan_vmmc>; + regulator-name = "reg_wlan_vmmc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio6 15 GPIO_ACTIVE_HIGH>; + startup-delay-us = <70000>; + enable-active-high; + }; }; gpio-keys { @@ -481,6 +494,18 @@ >; }; + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17071 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10071 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17071 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17071 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17071 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17071 + MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x000b0 + >; + }; + pinctrl_usdhc3: usdhc3grp { fsl,pins = < MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 @@ -504,6 +529,15 @@ MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x1b0b0 /* CD */ >; }; + + pinctrl_wlan_vmmc: wlan_vmmcgrp { + fsl,pins = < + MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x100b0 + MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x000b0 + MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x000b0 + MX6QDL_PAD_SD1_CLK__OSC32K_32K_OUT 0x000b0 + >; + }; }; }; @@ -579,6 +613,27 @@ status = "okay"; }; +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + bus-width = <4>; + non-removable; + vmmc-supply = <®_wlan_vmmc>; + cap-power-off-card; + keep-power-in-suspend; + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + wlcore: wlcore@2 { + compatible = "ti,wl1271"; + reg = <2>; + interrupt-parent = <&gpio6>; + interrupts = <14 IRQ_TYPE_LEVEL_HIGH>; + ref-clock-frequency = <38400000>; + }; +}; + &usdhc3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc3>; -- 2.5.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply related [flat|nested] 46+ messages in thread
* [PATCH 3/4] ARM: dts: imx: add Boundary Devices Nitrogen6_Max board [not found] ` <1441645069-27263-1-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org> 2015-09-07 16:57 ` [PATCH 1/4] ARM: dts: imx6dql-nitrogen6x: add touchscreen support Gary Bisson 2015-09-07 16:57 ` [PATCH 2/4] ARM: dts: imx6qdl-nitrogen6x: add wifi wl1271 support Gary Bisson @ 2015-09-07 16:57 ` Gary Bisson 2015-09-07 16:57 ` [PATCH 4/4] ARM: dts: imx: add Boundary Devices Nitrogen6_Lite board Gary Bisson ` (3 subsequent siblings) 6 siblings, 0 replies; 46+ messages in thread From: Gary Bisson @ 2015-09-07 16:57 UTC (permalink / raw) To: devicetree-u79uwXL29TY76Z2rM5mHXA Cc: shawn.guo-QSEj5FYQhm4dnm+yROfE0A, kernel-bIcnvbaLZ9MEGnE8C9+IrQ, robh+dt-DgEjT+Ai2ygdnm+yROfE0A, fabio.estevam-KZfg59tc24xl57MIdRCFDg, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, linux-lFZ/pmaqli7XmaaqVzeoHQ, troy.kisky-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR, Gary Bisson Based on i.MX6 Quad with 4GB of DDR3. http://boundarydevices.com/product/nitrogen6max/ Signed-off-by: Gary Bisson <gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org> --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/imx6q-nitrogen6_max.dts | 25 + arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi | 844 +++++++++++++++++++++++++++ 3 files changed, 870 insertions(+) create mode 100644 arch/arm/boot/dts/imx6q-nitrogen6_max.dts create mode 100644 arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 233159d..cc29515 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -313,6 +313,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6q-gw552x.dtb \ imx6q-hummingboard.dtb \ imx6q-nitrogen6x.dtb \ + imx6q-nitrogen6_max.dtb \ imx6q-phytec-pbab01.dtb \ imx6q-rex-pro.dtb \ imx6q-sabreauto.dtb \ diff --git a/arch/arm/boot/dts/imx6q-nitrogen6_max.dts b/arch/arm/boot/dts/imx6q-nitrogen6_max.dts new file mode 100644 index 0000000..b1c9047 --- /dev/null +++ b/arch/arm/boot/dts/imx6q-nitrogen6_max.dts @@ -0,0 +1,25 @@ +/* + * Copyright 2015 Boundary Devices, Inc. + * Copyright 2012 Freescale Semiconductor, Inc. + * Copyright 2011 Linaro Ltd. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +#include "imx6q.dtsi" +#include "imx6qdl-nitrogen6_max.dtsi" + +/ { + model = "Freescale i.MX6 Quad Nitrogen6_MAX Board"; + compatible = "fsl,imx6q-nitrogen6_max", "fsl,imx6q"; +}; + +&sata { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi new file mode 100644 index 0000000..a0e1d8d --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi @@ -0,0 +1,844 @@ +/* + * Copyright 2015 Boundary Devices, Inc. + * Copyright 2011 Freescale Semiconductor, Inc. + * Copyright 2011 Linaro Ltd. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + chosen { + stdout-path = &uart2; + }; + + memory { + reg = <0x10000000 0xF0000000>; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_1p8v: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "1P8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + reg_2p5v: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "2P5V"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; + + reg_3p3v: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_usb_otg_vbus: regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 22 0>; + enable-active-high; + }; + + reg_usb_h1_vbus: regulator@4 { + compatible = "regulator-fixed"; + reg = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh1>; + regulator-name = "usb_h1_vbus"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio7 12 0>; + enable-active-high; + }; + + reg_wlan_vmmc: regulator@5 { + compatible = "regulator-fixed"; + reg = <5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wlan_vmmc>; + regulator-name = "reg_wlan_vmmc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio6 15 0>; + startup-delay-us = <70000>; + enable-active-high; + }; + + reg_can_xcvr: regulator@6 { + compatible = "regulator-fixed"; + reg = <6>; + regulator-name = "CAN XCVR"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can_xcvr>; + gpio = <&gpio1 2 GPIO_ACTIVE_LOW>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_keys>; + + power { + label = "Power Button"; + gpios = <&gpio2 3 GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + gpio-key,wakeup; + }; + + menu { + label = "Menu"; + gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; + linux,code = <KEY_MENU>; + }; + + home { + label = "Home"; + gpios = <&gpio2 4 GPIO_ACTIVE_LOW>; + linux,code = <KEY_HOME>; + }; + + back { + label = "Back"; + gpios = <&gpio2 2 GPIO_ACTIVE_LOW>; + linux,code = <KEY_BACK>; + }; + + volume-up { + label = "Volume Up"; + gpios = <&gpio7 13 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + }; + + volume-down { + label = "Volume Down"; + gpios = <&gpio7 1 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEDOWN>; + }; + }; + + i2cmux@2 { + compatible = "i2c-mux-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2mux>; + #address-cells = <1>; + #size-cells = <0>; + mux-gpios = <&gpio3 20 0 &gpio4 15 0>; + i2c-parent = <&i2c2>; + idle-state = <0>; + + i2c2@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c2@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + i2cmux@3 { + compatible = "i2c-mux-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3mux>; + #address-cells = <1>; + #size-cells = <0>; + mux-gpios = <&gpio2 25 0>; + i2c-parent = <&i2c3>; + idle-state = <0>; + + i2c3@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + leds { + compatible = "gpio-leds"; + + speaker-enable { + gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>; + retain-state-suspended; + default-state = "off"; + }; + + ttymxc4-rs232 { + gpios = <&gpio6 10 GPIO_ACTIVE_HIGH>; + retain-state-suspended; + default-state = "on"; + }; + }; + + backlight_lcd: backlight_lcd { + compatible = "pwm-backlight"; + pwms = <&pwm1 0 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <7>; + power-supply = <®_3p3v>; + status = "okay"; + }; + + backlight_lvds0: backlight_lvds0 { + compatible = "pwm-backlight"; + pwms = <&pwm4 0 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <7>; + power-supply = <®_3p3v>; + status = "okay"; + }; + + backlight_lvds1: backlight_lvds1 { + compatible = "pwm-backlight"; + pwms = <&pwm2 0 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <7>; + power-supply = <®_3p3v>; + status = "okay"; + }; + + lcd_display: display@di0 { + compatible = "fsl,imx-parallel-display"; + #address-cells = <1>; + #size-cells = <0>; + interface-pix-fmt = "bgr666"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_j15>; + status = "okay"; + + port@0 { + reg = <0>; + + lcd_display_in: endpoint { + remote-endpoint = <&ipu1_di0_disp0>; + }; + }; + + port@1 { + reg = <1>; + + lcd_display_out: endpoint { + remote-endpoint = <&lcd_panel_in>; + }; + }; + }; + + panel_lcd { + compatible = "okaya,rs800480t-7x0gp"; + backlight = <&backlight_lcd>; + + port { + lcd_panel_in: endpoint { + remote-endpoint = <&lcd_display_out>; + }; + }; + }; + + panel_lvds0 { + compatible = "hannstar,hsd100pxn1"; + backlight = <&backlight_lvds0>; + + port { + panel_in_lvds0: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + }; + + panel_lvds1 { + compatible = "hannstar,hsd100pxn1"; + backlight = <&backlight_lvds1>; + + port { + panel_in_lvds1: endpoint { + remote-endpoint = <&lvds1_out>; + }; + }; + }; + + sound { + compatible = "fsl,imx6q-nitrogen6_max-sgtl5000", + "fsl,imx-audio-sgtl5000"; + model = "imx6q-nitrogen6_max-sgtl5000"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sgtl5000>; + ssi-controller = <&ssi1>; + audio-codec = <&codec>; + audio-routing = + "MIC_IN", "Mic Jack", + "Mic Jack", "Mic Bias", + "Headphone Jack", "HP_OUT"; + mux-int-port = <1>; + mux-ext-port = <3>; + }; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux>; + status = "okay"; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can1>; + xceiver-supply = <®_can_xcvr>; + status = "okay"; +}; + +&clks { + assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, + <&clks IMX6QDL_CLK_LDB_DI1_SEL>; + assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>, + <&clks IMX6QDL_CLK_PLL3_USB_OTG>; +}; + +&ecspi1 { + fsl,spi-num-chipselects = <1>; + cs-gpios = <&gpio3 19 0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + status = "okay"; + + flash: m25p80@0 { + compatible = "microchip,sst25vf016b"; + spi-max-frequency = <20000000>; + reg = <0>; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rgmii"; + phy-reset-gpios = <&gpio1 27 0>; + txen-skew-ps = <0>; + txc-skew-ps = <3000>; + rxdv-skew-ps = <0>; + rxc-skew-ps = <3000>; + rxd0-skew-ps = <0>; + rxd1-skew-ps = <0>; + rxd2-skew-ps = <0>; + rxd3-skew-ps = <0>; + txd0-skew-ps = <0>; + txd1-skew-ps = <0>; + txd2-skew-ps = <0>; + txd3-skew-ps = <0>; + interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>, + <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>; + status = "okay"; +}; + +&hdmi { + ddc-i2c-bus = <&i2c2>; + status = "okay"; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + codec: sgtl5000@0a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + clocks = <&clks 201>; + VDDA-supply = <®_2p5v>; + VDDIO-supply = <®_3p3v>; + }; + + rtc: rtc@68 { + compatible = "st,rv4162"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rv4162>; + reg = <0x68>; + interrupts-extended = <&gpio4 6 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + egalax_ts@04 { + compatible = "eeti,egalax_ts"; + reg = <0x04>; + interrupt-parent = <&gpio1>; + interrupts = <9 2>; + wakeup-gpios = <&gpio1 9 0>; + }; + + ft5x06_ts@38 { + compatible = "edt,edt-ft5x06"; + reg = <0x38>; + interrupt-parent = <&gpio1>; + interrupts = <9 2>; + wakeup-gpios = <&gpio1 9 0>; + }; +}; + +&iomuxc { + imx6q-nitrogen6_max { + pinctrl_audmux: audmuxgrp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0 + MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0 + MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0 + MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0 + >; + }; + + pinctrl_can1: can1grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b0 + MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b0 + >; + }; + + pinctrl_can_xcvr: can-xcvrgrp { + fsl,pins = < + /* Flexcan XCVR enable */ + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0 + >; + }; + + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 + MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 + MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 + MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x000b1 + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x100b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x100b0 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x100b0 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x100b0 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x100b0 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x100b0 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x100b0 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x100b0 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x100b0 + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 + /* Phy reset */ + MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x0f0b0 + MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0 + MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1 + >; + }; + + pinctrl_gpio_keys: gpio_keysgrp { + fsl,pins = < + /* Power Button */ + MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0 + /* Menu Button */ + MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0 + /* Home Button */ + MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x1b0b0 + /* Back Button */ + MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0 + /* Volume Up Button */ + MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x1b0b0 + /* Volume Down Button */ + MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x1b0b0 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c2mux: i2c2muxgrp { + fsl,pins = < + /* ov5642 camera i2c enable */ + MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x000b0 + /* ov5640_mipi camera i2c enable */ + MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x000b0 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_16__I2C3_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c3mux: i2c3muxgrp { + fsl,pins = < + /* PCIe I2C enable */ + MX6QDL_PAD_EIM_OE__GPIO2_IO25 0x000b0 + >; + }; + + pinctrl_j15: j15grp { + fsl,pins = < + MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10 + MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x10 + MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x10 + MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x10 + MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x10 + MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x10 + MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x10 + MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x10 + MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x10 + MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x10 + MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x10 + MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x10 + MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x10 + MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x10 + MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x10 + MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x10 + MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x10 + MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x10 + MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x10 + MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x10 + MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x10 + MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x10 + MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x10 + MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x10 + MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x10 + MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x10 + MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x10 + MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x10 + >; + }; + + pinctrl_pcie: pciegrp { + fsl,pins = < + /* PCIe reset */ + MX6QDL_PAD_EIM_BCLK__GPIO6_IO31 0x000b0 + >; + }; + + pinctrl_pwm1: pwm1grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1 + >; + }; + + pinctrl_pwm2: pwm2grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1 + >; + }; + + pinctrl_pwm3: pwm3grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1 + >; + }; + + pinctrl_pwm4: pwm4grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1 + >; + }; + + pinctrl_rv4162: rv4162grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0 + >; + }; + + pinctrl_sgtl5000: sgtl5000grp { + fsl,pins = < + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x000b0 + MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x1b0b0 + MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart5: uart5grp { + fsl,pins = < + MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x130b1 + MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x030b1 + /* RS485 RX Enable: pull up */ + MX6QDL_PAD_NANDF_RB0__GPIO6_IO10 0x1b0b1 + /* RS485 DEN: pull down */ + MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x030b1 + /* RS485/!RS232 Select: pull down (rs232) */ + MX6QDL_PAD_EIM_CS1__GPIO2_IO24 0x030b1 + /* ON: pull down */ + MX6QDL_PAD_NANDF_ALE__GPIO6_IO08 0x030b1 + >; + }; + + pinctrl_usbh1: usbh1grp { + fsl,pins = < + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x0b0b0 + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 + MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x1b0b0 + /* power enable, high active */ + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x000b0 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x100b0 + MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0 + >; + }; + + pinctrl_usdhc4: usdhc4grp { + fsl,pins = < + MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059 + MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059 + MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059 + MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059 + MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059 + MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059 + MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059 + MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059 + MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059 + MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059 + >; + }; + + pinctrl_wlan_vmmc: wlan_vmmcgrp { + fsl,pins = < + MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x100b0 + MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x000b0 + MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x000b0 + MX6QDL_PAD_SD1_CLK__OSC32K_32K_OUT 0x000b0 + >; + }; + }; +}; + +&ipu1_di0_disp0 { + remote-endpoint = <&lcd_display_in>; +}; + +&ldb { + status = "okay"; + + lvds-channel@0 { + fsl,data-mapping = "spwg"; + fsl,data-width = <18>; + status = "okay"; + + port@4 { + reg = <4>; + + lvds0_out: endpoint { + remote-endpoint = <&panel_in_lvds0>; + }; + }; + }; + + lvds-channel@1 { + fsl,data-mapping = "spwg"; + fsl,data-width = <18>; + status = "okay"; + + port@4 { + reg = <4>; + + lvds1_out: endpoint { + remote-endpoint = <&panel_in_lvds1>; + }; + }; + }; +}; + +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie>; + reset-gpio = <&gpio6 31 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "okay"; +}; + +&pwm2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm2>; + status = "okay"; +}; + +&pwm3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm3>; + status = "okay"; +}; + +&pwm4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm4>; + status = "okay"; +}; + +&ssi1 { + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + status = "okay"; +}; + +&usbh1 { + vbus-supply = <®_usb_h1_vbus>; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_usb_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + disable-over-current; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + bus-width = <4>; + non-removable; + vmmc-supply = <®_wlan_vmmc>; + cap-power-off-card; + keep-power-in-suspend; + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + wlcore: wlcore@2 { + compatible = "ti,wl1271"; + reg = <2>; + interrupt-parent = <&gpio6>; + interrupts = <11 IRQ_TYPE_LEVEL_HIGH>; + ref-clock-frequency = <38400000>; + }; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; + bus-width = <4>; + vmmc-supply = <®_3p3v>; + status = "okay"; +}; + +&usdhc4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc4>; + bus-width = <8>; + non-removable; + vmmc-supply = <®_1p8v>; + keep-power-in-suspend; + status = "okay"; +}; -- 2.5.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply related [flat|nested] 46+ messages in thread
* [PATCH 4/4] ARM: dts: imx: add Boundary Devices Nitrogen6_Lite board [not found] ` <1441645069-27263-1-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org> ` (2 preceding siblings ...) 2015-09-07 16:57 ` [PATCH 3/4] ARM: dts: imx: add Boundary Devices Nitrogen6_Max board Gary Bisson @ 2015-09-07 16:57 ` Gary Bisson [not found] ` <1441645069-27263-5-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org> 2015-09-08 14:34 ` [PATCH v2 0/9] ARM: dts: update Boundary Devices boards support Gary Bisson ` (2 subsequent siblings) 6 siblings, 1 reply; 46+ messages in thread From: Gary Bisson @ 2015-09-07 16:57 UTC (permalink / raw) To: devicetree-u79uwXL29TY76Z2rM5mHXA Cc: shawn.guo-QSEj5FYQhm4dnm+yROfE0A, kernel-bIcnvbaLZ9MEGnE8C9+IrQ, robh+dt-DgEjT+Ai2ygdnm+yROfE0A, fabio.estevam-KZfg59tc24xl57MIdRCFDg, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, linux-lFZ/pmaqli7XmaaqVzeoHQ, troy.kisky-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR, Gary Bisson Based on an i.MX6 Solo with 512MB DDR3. http://boundarydevices.com/product/nitrogen6_lite/ Signed-off-by: Gary Bisson <gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org> --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/imx6dl-nit6xlite.dts | 21 ++ arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi | 603 +++++++++++++++++++++++++++++++ 3 files changed, 625 insertions(+) create mode 100644 arch/arm/boot/dts/imx6dl-nit6xlite.dts create mode 100644 arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index cc29515..b4afb42 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -284,6 +284,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6dl-gw551x.dtb \ imx6dl-gw552x.dtb \ imx6dl-hummingboard.dtb \ + imx6dl-nit6xlite.dtb \ imx6dl-nitrogen6x.dtb \ imx6dl-phytec-pbab01.dtb \ imx6dl-rex-basic.dtb \ diff --git a/arch/arm/boot/dts/imx6dl-nit6xlite.dts b/arch/arm/boot/dts/imx6dl-nit6xlite.dts new file mode 100644 index 0000000..6d56ae5 --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-nit6xlite.dts @@ -0,0 +1,21 @@ +/* + * Copyright 2015 Boundary Devices, Inc. + * Copyright 2012 Freescale Semiconductor, Inc. + * Copyright 2011 Linaro Ltd. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +#include "imx6dl.dtsi" +#include "imx6qdl-nit6xlite.dtsi" + +/ { + model = "Freescale i.MX6 Solo Nitrogen6_Lite Board"; + compatible = "fsl,imx6dl-nit6xlite", "fsl,imx6dl"; +}; diff --git a/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi b/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi new file mode 100644 index 0000000..acca6afa --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi @@ -0,0 +1,603 @@ +/* + * Copyright 2015 Boundary Devices, Inc. + * Copyright 2011 Freescale Semiconductor, Inc. + * Copyright 2011 Linaro Ltd. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + chosen { + stdout-path = &uart2; + }; + + memory { + reg = <0x10000000 0x20000000>; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_2p5v: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "2P5V"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; + + reg_3p3v: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_usb_otg_vbus: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 22 0>; + enable-active-high; + }; + + reg_wlan_vmmc: regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wlan_vmmc>; + regulator-name = "reg_wlan_vmmc"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&gpio6 7 GPIO_ACTIVE_HIGH>; + startup-delay-us = <70000>; + enable-active-high; + }; + }; + + bt_rfkill { + compatible = "rfkill-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_bt_rfkill>; + gpios = <&gpio6 8 GPIO_ACTIVE_HIGH>; + name = "bt_rfkill"; + type = <2>; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_keys>; + + home { + label = "Home"; + gpios = <&gpio7 13 IRQ_TYPE_LEVEL_LOW>; + linux,code = <102>; + }; + + back { + label = "Back"; + gpios = <&gpio4 5 IRQ_TYPE_LEVEL_LOW>; + linux,code = <158>; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_leds>; + + j14-pin1 { + gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; + retain-state-suspended; + default-state = "off"; + }; + + j14-pin3 { + gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; + retain-state-suspended; + default-state = "off"; + }; + + j14-pins8-9 { + gpios = <&gpio3 29 GPIO_ACTIVE_LOW>; + retain-state-suspended; + default-state = "off"; + }; + + j46-pin2 { + gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; + retain-state-suspended; + default-state = "off"; + }; + + j46-pin3 { + gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; + retain-state-suspended; + default-state = "off"; + }; + }; + + backlight_lcd { + compatible = "pwm-backlight"; + pwms = <&pwm1 0 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <7>; + power-supply = <®_3p3v>; + status = "okay"; + }; + + backlight_lvds0: backlight_lvds0 { + compatible = "pwm-backlight"; + pwms = <&pwm4 0 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <7>; + power-supply = <®_3p3v>; + status = "okay"; + }; + + panel_lvds0 { + compatible = "hannstar,hsd100pxn1"; + backlight = <&backlight_lvds0>; + + port { + panel_in_lvds0: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + }; + + sound { + compatible = "fsl,imx6dl-nit6xlite-sgtl5000", + "fsl,imx-audio-sgtl5000"; + model = "imx6dl-nit6xlite-sgtl5000"; + ssi-controller = <&ssi1>; + audio-codec = <&codec>; + audio-routing = + "MIC_IN", "Mic Jack", + "Mic Jack", "Mic Bias", + "Headphone Jack", "HP_OUT"; + mux-int-port = <1>; + mux-ext-port = <3>; + }; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux>; + status = "okay"; +}; + +&clks { + assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, + <&clks IMX6QDL_CLK_LDB_DI1_SEL>; + assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>, + <&clks IMX6QDL_CLK_PLL3_USB_OTG>; +}; + +&ecspi1 { + fsl,spi-num-chipselects = <1>; + cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + status = "okay"; + + flash: m25p80@0 { + compatible = "microchip,sst25vf016b"; + spi-max-frequency = <20000000>; + reg = <0>; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rgmii"; + phy-reset-gpios = <&gpio1 27 0>; + txen-skew-ps = <0>; + txc-skew-ps = <3000>; + rxdv-skew-ps = <0>; + rxc-skew-ps = <3000>; + rxd0-skew-ps = <0>; + rxd1-skew-ps = <0>; + rxd2-skew-ps = <0>; + rxd3-skew-ps = <0>; + txd0-skew-ps = <0>; + txd1-skew-ps = <0>; + txd2-skew-ps = <0>; + txd3-skew-ps = <0>; + interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>, + <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>; + status = "okay"; +}; + +&hdmi { + ddc-i2c-bus = <&i2c2>; + status = "okay"; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + codec: sgtl5000@0a { + compatible = "fsl,sgtl5000"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sgtl5000>; + reg = <0x0a>; + clocks = <&clks 201>; + VDDA-supply = <®_2p5v>; + VDDIO-supply = <®_3p3v>; + }; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + egalax_ts@04 { + compatible = "eeti,egalax_ts"; + reg = <0x04>; + interrupt-parent = <&gpio1>; + interrupts = <9 2>; + wakeup-gpios = <&gpio1 9 0>; + }; + + ft5x06_ts@38 { + compatible = "edt,edt-ft5x06"; + reg = <0x38>; + interrupt-parent = <&gpio1>; + interrupts = <9 2>; + wakeup-gpios = <&gpio1 9 0>; + }; + + isl1208@6f { + compatible = "isil,isl1208"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rtc>; + reg = <0x6f>; + interrupts-extended = <&gpio2 26 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_j10>; + pinctrl-1 = <&pinctrl_j28>; + + imx6dl-nit6xlite { + pinctrl_audmux: audmuxgrp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0 + MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0 + MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0 + MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0 + >; + }; + + pinctrl_bt_rfkill: bt_rfkillgrp { + fsl,pins = < + /* BT wake */ + MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0 + /* BT reset */ + MX6QDL_PAD_NANDF_ALE__GPIO6_IO08 0x0b0b0 + /* BT reg en */ + MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x1b0b0 + /* BT host wake irq */ + MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x100b0 + >; + }; + + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 + MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 + MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 + MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x000b1 + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x100b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x100b0 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x100b0 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x100b0 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x100b0 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x100b0 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x100b0 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x100b0 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x100b0 + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 + /* Phy reset */ + MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x0f0b0 + MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0 + MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1 + >; + }; + + pinctrl_gpio_keys: gpio_keysgrp { + fsl,pins = < + /* Home Button: J14 pin 5 */ + MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x1b0b0 + /* Back Button: J14 pin 7 */ + MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x1b0b0 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_16__I2C3_SDA 0x4001b8b1 + /* Touch IRQ: J7 pin 4 */ + MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0 + /* tcs2004 IRQ */ + MX6QDL_PAD_EIM_LBA__GPIO2_IO27 0x1b0b0 + /* tsc2004 reset */ + MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x0b0b0 + >; + }; + + pinctrl_j10: j10grp { + fsl,pins = < + /* Broadcom WiFi module pins */ + MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x1b0b0 + MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0 + MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0 + MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x1b0b0 + MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09 0x0b0b0 + MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x1b0b0 + MX6QDL_PAD_SD1_CLK__OSC32K_32K_OUT 0x000b0 + >; + }; + + pinctrl_j28: j28grp { + fsl,pins = < + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0 + >; + }; + + pinctrl_leds: ledsgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x0b0b0 + MX6QDL_PAD_GPIO_3__GPIO1_IO03 0x0b0b0 + MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x030b0 + MX6QDL_PAD_GPIO_7__GPIO1_IO07 0x0b0b0 + MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0b0b0 + >; + }; + + pinctrl_pwm1: pwm1grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1 + >; + }; + + pinctrl_pwm3: pwm3grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1 + >; + }; + + pinctrl_pwm4: pwm4grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1 + >; + }; + + pinctrl_wlan_vmmc: wlan_vmmcgrp { + fsl,pins = < + MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x030b0 + >; + }; + + pinctrl_rtc: rtcgrp { + fsl,pins = < + MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x1b0b0 + >; + }; + + pinctrl_sgtl5000: sgtl5000grp { + fsl,pins = < + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x000b0 + MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x1b0b0 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D23__UART3_CTS_B 0x1b0b1 + MX6QDL_PAD_EIM_D31__UART3_RTS_B 0x1b0b1 + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 + MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x1b0b0 + /* power enable, high active */ + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x000b0 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0 + >; + }; + }; +}; + +&ldb { + status = "okay"; + + lvds-channel@0 { + fsl,data-mapping = "spwg"; + fsl,data-width = <18>; + status = "okay"; + + port@4 { + reg = <4>; + + lvds0_out: endpoint { + remote-endpoint = <&panel_in_lvds0>; + }; + }; + }; +}; + +&pcie { + status = "okay"; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "okay"; +}; + +&pwm3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm3>; + status = "okay"; +}; + +&pwm4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm4>; + status = "okay"; +}; + +&ssi1 { + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + fsl,uart-has-rtscts; + status = "okay"; +}; + +&usbh1 { + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_usb_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + disable-over-current; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + bus-width = <4>; + non-removable; + vmmc-supply = <®_3p3v>; + vqmmc-supply = <®_wlan_vmmc>; + vqmmc-1-8-v; + ocr-limit = <0x180>; /* 1.65v - 2.1v */ + cap-power-off-card; + keep-power-in-suspend; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; + vmmc-supply = <®_3p3v>; + status = "okay"; +}; -- 2.5.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply related [flat|nested] 46+ messages in thread
[parent not found: <1441645069-27263-5-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>]
* Re: [PATCH 4/4] ARM: dts: imx: add Boundary Devices Nitrogen6_Lite board [not found] ` <1441645069-27263-5-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org> @ 2015-09-08 1:08 ` Fabio Estevam [not found] ` <CAOMZO5Bb5TwtV4=C4jtU9KpuwtYSdYcSCgQVMMOY0FMf7hZx8w-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org> 0 siblings, 1 reply; 46+ messages in thread From: Fabio Estevam @ 2015-09-08 1:08 UTC (permalink / raw) To: Gary Bisson Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, Shawn Guo, Sascha Hauer, robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org, Fabio Estevam, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, Russell King, Troy Kisky Hi Gary, On Mon, Sep 7, 2015 at 1:57 PM, Gary Bisson <gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org> wrote: > --- /dev/null > +++ b/arch/arm/boot/dts/imx6dl-nit6xlite.dts > @@ -0,0 +1,21 @@ > +/* > + * Copyright 2015 Boundary Devices, Inc. > + * Copyright 2012 Freescale Semiconductor, Inc. > + * Copyright 2011 Linaro Ltd. > + * > + * The code contained herein is licensed under the GNU General Public > + * License. You may obtain a copy of the GNU General Public License > + * Version 2 or later at the following locations: Could you do this dual license GPLv2/X11? Take a look at arch/arm/boot/dts/imx6qdl-cubox-i.dtsi for a reference. > + * > + * http://www.opensource.org/licenses/gpl-license.html > + * http://www.gnu.org/copyleft/gpl.html > + */ > + > +/dts-v1/; > +#include "imx6dl.dtsi" > +#include "imx6qdl-nit6xlite.dtsi" > + > +/ { > + model = "Freescale i.MX6 Solo Nitrogen6_Lite Board"; > + compatible = "fsl,imx6dl-nit6xlite", "fsl,imx6dl"; As this board is manufactured by Boundary Devices and not by Freescale shouldn't this be: model = "Boundary Devices i.MX6 Solo Nitrogen6_Lite Board"; compatible = "boundarydevices,imx6dl-nit6xlite", "fsl,imx6dl"; Then you can add the symbol for Boundary Devices at Documentation/devicetree/bindings/vendor-prefixes.txt in a separate patch. Regards, Fabio Estevam -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 46+ messages in thread
[parent not found: <CAOMZO5Bb5TwtV4=C4jtU9KpuwtYSdYcSCgQVMMOY0FMf7hZx8w-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>]
* Re: [PATCH 4/4] ARM: dts: imx: add Boundary Devices Nitrogen6_Lite board [not found] ` <CAOMZO5Bb5TwtV4=C4jtU9KpuwtYSdYcSCgQVMMOY0FMf7hZx8w-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org> @ 2015-09-08 10:18 ` Gary Bisson [not found] ` <CAAMH-ysfTs9W+dWdS7DR9=KKPxij1DEHEevMn3+TMp8gqvoELQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org> 0 siblings, 1 reply; 46+ messages in thread From: Gary Bisson @ 2015-09-08 10:18 UTC (permalink / raw) To: Fabio Estevam Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, Shawn Guo, Sascha Hauer, robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org, Fabio Estevam, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, Russell King, Troy Kisky Hi Fabio, On Tue, Sep 8, 2015 at 3:08 AM, Fabio Estevam <festevam-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> wrote: > Hi Gary, > > On Mon, Sep 7, 2015 at 1:57 PM, Gary Bisson > <gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org> wrote: > >> --- /dev/null >> +++ b/arch/arm/boot/dts/imx6dl-nit6xlite.dts >> @@ -0,0 +1,21 @@ >> +/* >> + * Copyright 2015 Boundary Devices, Inc. >> + * Copyright 2012 Freescale Semiconductor, Inc. >> + * Copyright 2011 Linaro Ltd. >> + * >> + * The code contained herein is licensed under the GNU General Public >> + * License. You may obtain a copy of the GNU General Public License >> + * Version 2 or later at the following locations: > > Could you do this dual license GPLv2/X11? > > Take a look at arch/arm/boot/dts/imx6qdl-cubox-i.dtsi for a reference. Ok will do in v2. Should I relicense Nitrogen6x and SabreLite as well? >> + * >> + * http://www.opensource.org/licenses/gpl-license.html >> + * http://www.gnu.org/copyleft/gpl.html >> + */ >> + >> +/dts-v1/; >> +#include "imx6dl.dtsi" >> +#include "imx6qdl-nit6xlite.dtsi" >> + >> +/ { >> + model = "Freescale i.MX6 Solo Nitrogen6_Lite Board"; >> + compatible = "fsl,imx6dl-nit6xlite", "fsl,imx6dl"; > > As this board is manufactured by Boundary Devices and not by Freescale > shouldn't this be: > > model = "Boundary Devices i.MX6 Solo Nitrogen6_Lite Board"; > compatible = "boundarydevices,imx6dl-nit6xlite", "fsl,imx6dl"; > > Then you can add the symbol for Boundary Devices at > Documentation/devicetree/bindings/vendor-prefixes.txt in a separate > patch. Yes, I actually just copied what was done for the Nitrogen6x, should I update the latter as well? Thanks, Gary -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 46+ messages in thread
[parent not found: <CAAMH-ysfTs9W+dWdS7DR9=KKPxij1DEHEevMn3+TMp8gqvoELQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>]
* Re: [PATCH 4/4] ARM: dts: imx: add Boundary Devices Nitrogen6_Lite board [not found] ` <CAAMH-ysfTs9W+dWdS7DR9=KKPxij1DEHEevMn3+TMp8gqvoELQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org> @ 2015-09-08 11:41 ` Fabio Estevam 0 siblings, 0 replies; 46+ messages in thread From: Fabio Estevam @ 2015-09-08 11:41 UTC (permalink / raw) To: Gary Bisson Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, Shawn Guo, Sascha Hauer, robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org, Fabio Estevam, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, Russell King, Troy Kisky Hi Gary, On Tue, Sep 8, 2015 at 7:18 AM, Gary Bisson <gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org> wrote: > Hi Fabio, > Ok will do in v2. Should I relicense Nitrogen6x and SabreLite as well? That would be nice. > Yes, I actually just copied what was done for the Nitrogen6x, should I > update the latter as well? Yes, please. Regards, Fabio Estevam -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 46+ messages in thread
* [PATCH v2 0/9] ARM: dts: update Boundary Devices boards support [not found] ` <1441645069-27263-1-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org> ` (3 preceding siblings ...) 2015-09-07 16:57 ` [PATCH 4/4] ARM: dts: imx: add Boundary Devices Nitrogen6_Lite board Gary Bisson @ 2015-09-08 14:34 ` Gary Bisson [not found] ` <1441722886-22798-1-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org> 2015-09-09 12:30 ` [PATCH v3 0/9] ARM: dts: update Boundary Devices boards support Gary Bisson 2015-09-30 13:46 ` [RESEND][PATCH " Gary Bisson 6 siblings, 1 reply; 46+ messages in thread From: Gary Bisson @ 2015-09-08 14:34 UTC (permalink / raw) To: devicetree-u79uwXL29TY76Z2rM5mHXA Cc: shawn.guo-QSEj5FYQhm4dnm+yROfE0A, kernel-bIcnvbaLZ9MEGnE8C9+IrQ, robh+dt-DgEjT+Ai2ygdnm+yROfE0A, fabio.estevam-KZfg59tc24xl57MIdRCFDg, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, linux-lFZ/pmaqli7XmaaqVzeoHQ, p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ, Gary Bisson Hi all, This series is a follow-up to the previous series that added LCD display support. http://lists.infradead.org/pipermail/linux-arm-kernel/2015-August/364425.html This one aims at adding touchscreen and WiFi support for Nitrogen6x as well as adding two boards: Nitrogen6_Max and Nit6xlite. It also takes care of updating the licenses to be GPLv2/X11. The series has been tested against linux-next tag next-20150908. Note that imx_v6_v7_defconfig has been used with the following additions: CONFIG_TOUCHSCREEN_EDT_FT5X06=y CONFIG_I2C_MUX_GPIO=y CONFIG_RTC_DRV_M41T80=y Modifications: v1->v2: - Add Boundary Devices Inc. to vendor prefixes - Relicense devices trees to GPLv2/X11 as suggested by Fabio for: - Nitrogen6x - SabreLite - Nit6xLite - Nitrogen6_MAX - Change manufacturer to Boundary Devices as suggested by Fabio for: - Nitrogen6x - Nit6xLite - Nitrogen6_MAX - Fixed missing macros for gpio/irq values as suggested by Philipp. Regards, Gary Gary Bisson (9): ARM: dts: imx6dql-nitrogen6x: add touchscreen support ARM: dts: imx6qdl-nitrogen6x: add wifi wl1271 support ARM: dts: imx6qdl-nitrogen6x: relicense under GPLv2/X11 ARM: dts: imx6qdl-sabrelite: relicense under GPLv2/X11 of: Add Boundary Devices Inc. vendor prefix ARM: dts: imx6q-nitrogen6x: change manufacturer to Boundary Devices ARM: dts: imx6dl-nitrogen6x: change manufacturer to Boundary Devices ARM: dts: imx: add Boundary Devices Nitrogen6_Max board ARM: dts: imx: add Boundary Devices Nitrogen6_Lite board .../devicetree/bindings/vendor-prefixes.txt | 1 + arch/arm/boot/dts/Makefile | 2 + arch/arm/boot/dts/imx6dl-nit6xlite.dts | 49 +++ arch/arm/boot/dts/imx6dl-nitrogen6x.dts | 44 +- arch/arm/boot/dts/imx6dl-sabrelite.dts | 40 +- arch/arm/boot/dts/imx6q-nitrogen6_max.dts | 53 +++ arch/arm/boot/dts/imx6q-nitrogen6x.dts | 44 +- arch/arm/boot/dts/imx6q-sabrelite.dts | 40 +- ...6qdl-nitrogen6x.dtsi => imx6qdl-nit6xlite.dtsi} | 465 ++++++++++++--------- ...-nitrogen6x.dtsi => imx6qdl-nitrogen6_max.dtsi} | 437 +++++++++++++++---- arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi | 111 ++++- arch/arm/boot/dts/imx6qdl-sabrelite.dtsi | 40 +- 12 files changed, 1013 insertions(+), 313 deletions(-) create mode 100644 arch/arm/boot/dts/imx6dl-nit6xlite.dts create mode 100644 arch/arm/boot/dts/imx6q-nitrogen6_max.dts copy arch/arm/boot/dts/{imx6qdl-nitrogen6x.dtsi => imx6qdl-nit6xlite.dtsi} (51%) copy arch/arm/boot/dts/{imx6qdl-nitrogen6x.dtsi => imx6qdl-nitrogen6_max.dtsi} (53%) -- 2.5.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 46+ messages in thread
[parent not found: <1441722886-22798-1-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>]
* [PATCH v2 1/9] ARM: dts: imx6dql-nitrogen6x: add touchscreen support [not found] ` <1441722886-22798-1-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org> @ 2015-09-08 14:34 ` Gary Bisson [not found] ` <1441722886-22798-2-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org> 2015-09-08 14:34 ` [PATCH v2 2/9] ARM: dts: imx6qdl-nitrogen6x: add wifi wl1271 support Gary Bisson ` (7 subsequent siblings) 8 siblings, 1 reply; 46+ messages in thread From: Gary Bisson @ 2015-09-08 14:34 UTC (permalink / raw) To: devicetree-u79uwXL29TY76Z2rM5mHXA Cc: shawn.guo-QSEj5FYQhm4dnm+yROfE0A, kernel-bIcnvbaLZ9MEGnE8C9+IrQ, robh+dt-DgEjT+Ai2ygdnm+yROfE0A, fabio.estevam-KZfg59tc24xl57MIdRCFDg, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, linux-lFZ/pmaqli7XmaaqVzeoHQ, p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ, Gary Bisson This patch adds the different touchscreens that can be connected using the displays available for this board. http://boundarydevices.com/product-category/displays/ Signed-off-by: Gary Bisson <gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org> --- arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi index ad16dce..24b667d 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi @@ -284,6 +284,22 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c3>; status = "okay"; + + egalax_ts@04 { + compatible = "eeti,egalax_ts"; + reg = <0x04>; + interrupt-parent = <&gpio1>; + interrupts = <9 IRQ_TYPE_EDGE_FALLING>; + wakeup-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; + }; + + ft5x06_ts@38 { + compatible = "edt,edt-ft5x06"; + reg = <0x38>; + interrupt-parent = <&gpio1>; + interrupts = <9 IRQ_TYPE_EDGE_FALLING>; + wakeup-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; + }; }; &iomuxc { -- 2.5.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply related [flat|nested] 46+ messages in thread
[parent not found: <1441722886-22798-2-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>]
* Re: [PATCH v2 1/9] ARM: dts: imx6dql-nitrogen6x: add touchscreen support [not found] ` <1441722886-22798-2-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org> @ 2015-09-08 14:49 ` Philipp Zabel [not found] ` <1441723760.3241.26.camel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org> 0 siblings, 1 reply; 46+ messages in thread From: Philipp Zabel @ 2015-09-08 14:49 UTC (permalink / raw) To: Gary Bisson Cc: devicetree-u79uwXL29TY76Z2rM5mHXA, shawn.guo-QSEj5FYQhm4dnm+yROfE0A, kernel-bIcnvbaLZ9MEGnE8C9+IrQ, robh+dt-DgEjT+Ai2ygdnm+yROfE0A, fabio.estevam-KZfg59tc24xl57MIdRCFDg, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, linux-lFZ/pmaqli7XmaaqVzeoHQ Am Dienstag, den 08.09.2015, 16:34 +0200 schrieb Gary Bisson: > This patch adds the different touchscreens that can be connected using > the displays available for this board. > http://boundarydevices.com/product-category/displays/ > > Signed-off-by: Gary Bisson <gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org> > --- > arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi | 16 ++++++++++++++++ > 1 file changed, 16 insertions(+) > > diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi > index ad16dce..24b667d 100644 > --- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi > +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi > @@ -284,6 +284,22 @@ > pinctrl-names = "default"; > pinctrl-0 = <&pinctrl_i2c3>; > status = "okay"; > + > + egalax_ts@04 { I'd prefer to use generic names for the nodes, such as "touchscreen@04", and "touchscreen@38" below. > + compatible = "eeti,egalax_ts"; > + reg = <0x04>; > + interrupt-parent = <&gpio1>; > + interrupts = <9 IRQ_TYPE_EDGE_FALLING>; > + wakeup-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; > + }; > + > + ft5x06_ts@38 { > + compatible = "edt,edt-ft5x06"; > + reg = <0x38>; > + interrupt-parent = <&gpio1>; > + interrupts = <9 IRQ_TYPE_EDGE_FALLING>; > + wakeup-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; This should be wake-gpios and GPIO_ACTIVE_HIGH according to the other users. > + }; > }; > > &iomuxc { With those changes, Acked-by: Philipp Zabel <p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org> regards Philipp -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 46+ messages in thread
[parent not found: <1441723760.3241.26.camel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>]
* Re: [PATCH v2 1/9] ARM: dts: imx6dql-nitrogen6x: add touchscreen support [not found] ` <1441723760.3241.26.camel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org> @ 2015-09-08 20:33 ` Russell King - ARM Linux 2015-09-09 10:03 ` Gary Bisson 1 sibling, 0 replies; 46+ messages in thread From: Russell King - ARM Linux @ 2015-09-08 20:33 UTC (permalink / raw) To: Philipp Zabel Cc: Gary Bisson, devicetree-u79uwXL29TY76Z2rM5mHXA, shawn.guo-QSEj5FYQhm4dnm+yROfE0A, kernel-bIcnvbaLZ9MEGnE8C9+IrQ, robh+dt-DgEjT+Ai2ygdnm+yROfE0A, fabio.estevam-KZfg59tc24xl57MIdRCFDg, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r On Tue, Sep 08, 2015 at 04:49:20PM +0200, Philipp Zabel wrote: > Am Dienstag, den 08.09.2015, 16:34 +0200 schrieb Gary Bisson: > > This patch adds the different touchscreens that can be connected using > > the displays available for this board. > > http://boundarydevices.com/product-category/displays/ > > > > Signed-off-by: Gary Bisson <gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org> > > --- > > arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi | 16 ++++++++++++++++ > > 1 file changed, 16 insertions(+) > > > > diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi > > index ad16dce..24b667d 100644 > > --- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi > > +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi > > @@ -284,6 +284,22 @@ > > pinctrl-names = "default"; > > pinctrl-0 = <&pinctrl_i2c3>; > > status = "okay"; > > + > > + egalax_ts@04 { > > I'd prefer to use generic names for the nodes, such as "touchscreen@04", > and "touchscreen@38" below. ePAPR actually says that the node name should be the general class of the device, and recommending that it should be generic: 2.2.1.1 Node Name Requirements ... The node-name shall start with a lower or uppercase character and should describe the general class of device. 2.2.2 Generic Names Recommendation The name of a node should be somewhat generic, reflecting the function of the device and not its precise programming model. If appropriate, the name should be one of the following choices: ... It would be nice if more bindings followed this. -- FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up according to speedtest.net. -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [PATCH v2 1/9] ARM: dts: imx6dql-nitrogen6x: add touchscreen support [not found] ` <1441723760.3241.26.camel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org> 2015-09-08 20:33 ` Russell King - ARM Linux @ 2015-09-09 10:03 ` Gary Bisson 1 sibling, 0 replies; 46+ messages in thread From: Gary Bisson @ 2015-09-09 10:03 UTC (permalink / raw) To: Philipp Zabel Cc: devicetree-u79uwXL29TY76Z2rM5mHXA, Shawn Guo, Sascha Hauer, Rob Herring, Fabio Estevam, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, Russell King Hi, On Tue, Sep 8, 2015 at 4:49 PM, Philipp Zabel <p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org> wrote: > Am Dienstag, den 08.09.2015, 16:34 +0200 schrieb Gary Bisson: >> This patch adds the different touchscreens that can be connected using >> the displays available for this board. >> http://boundarydevices.com/product-category/displays/ >> >> Signed-off-by: Gary Bisson <gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org> >> --- >> arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi | 16 ++++++++++++++++ >> 1 file changed, 16 insertions(+) >> >> diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi >> index ad16dce..24b667d 100644 >> --- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi >> +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi >> @@ -284,6 +284,22 @@ >> pinctrl-names = "default"; >> pinctrl-0 = <&pinctrl_i2c3>; >> status = "okay"; >> + >> + egalax_ts@04 { > > I'd prefer to use generic names for the nodes, such as "touchscreen@04", > and "touchscreen@38" below. Ok will do. Plus for the two new boards, I'll try to follow Russell comment. >> + compatible = "eeti,egalax_ts"; >> + reg = <0x04>; >> + interrupt-parent = <&gpio1>; >> + interrupts = <9 IRQ_TYPE_EDGE_FALLING>; >> + wakeup-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; >> + }; >> + >> + ft5x06_ts@38 { >> + compatible = "edt,edt-ft5x06"; >> + reg = <0x38>; >> + interrupt-parent = <&gpio1>; >> + interrupts = <9 IRQ_TYPE_EDGE_FALLING>; >> + wakeup-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; > > This should be wake-gpios and GPIO_ACTIVE_HIGH according to the other > users. Actually I'm going to remove that line. First it should be wake-gpios instead of wakeup-gpios. When I realized and changed it the driver wouldn't work at all. Indeed looking at the source code and other example it looks like it should be a different GPIO than the interrupt one. For the eGalax, the driver output a 1 and 0 to create the falling edge that wakes the controller up and then releases the gpio as an input for interrupts. But in the edt driver, the GPIO is kept as an output which prevents from receiving any interrupt. Seems that the ft5x06 controllers on our display doesn't need any wake-up signal. I'll submit a v3 very soon. Regards, Gary -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 46+ messages in thread
* [PATCH v2 2/9] ARM: dts: imx6qdl-nitrogen6x: add wifi wl1271 support [not found] ` <1441722886-22798-1-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org> 2015-09-08 14:34 ` [PATCH v2 1/9] ARM: dts: imx6dql-nitrogen6x: add touchscreen support Gary Bisson @ 2015-09-08 14:34 ` Gary Bisson 2015-09-08 14:34 ` [PATCH v2 3/9] ARM: dts: imx6qdl-nitrogen6x: relicense under GPLv2/X11 Gary Bisson ` (6 subsequent siblings) 8 siblings, 0 replies; 46+ messages in thread From: Gary Bisson @ 2015-09-08 14:34 UTC (permalink / raw) To: devicetree-u79uwXL29TY76Z2rM5mHXA Cc: shawn.guo-QSEj5FYQhm4dnm+yROfE0A, kernel-bIcnvbaLZ9MEGnE8C9+IrQ, robh+dt-DgEjT+Ai2ygdnm+yROfE0A, fabio.estevam-KZfg59tc24xl57MIdRCFDg, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, linux-lFZ/pmaqli7XmaaqVzeoHQ, p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ, Gary Bisson Signed-off-by: Gary Bisson <gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org> --- arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi | 55 +++++++++++++++++++++++++++++++ 1 file changed, 55 insertions(+) diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi index 24b667d..7a455f7 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi @@ -65,6 +65,19 @@ pinctrl-0 = <&pinctrl_can_xcvr>; gpio = <&gpio1 2 GPIO_ACTIVE_LOW>; }; + + reg_wlan_vmmc: regulator@4 { + compatible = "regulator-fixed"; + reg = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wlan_vmmc>; + regulator-name = "reg_wlan_vmmc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio6 15 GPIO_ACTIVE_HIGH>; + startup-delay-us = <70000>; + enable-active-high; + }; }; gpio-keys { @@ -481,6 +494,18 @@ >; }; + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17071 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10071 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17071 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17071 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17071 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17071 + MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x000b0 + >; + }; + pinctrl_usdhc3: usdhc3grp { fsl,pins = < MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 @@ -504,6 +529,15 @@ MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x1b0b0 /* CD */ >; }; + + pinctrl_wlan_vmmc: wlan_vmmcgrp { + fsl,pins = < + MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x100b0 + MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x000b0 + MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x000b0 + MX6QDL_PAD_SD1_CLK__OSC32K_32K_OUT 0x000b0 + >; + }; }; }; @@ -579,6 +613,27 @@ status = "okay"; }; +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + bus-width = <4>; + non-removable; + vmmc-supply = <®_wlan_vmmc>; + cap-power-off-card; + keep-power-in-suspend; + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + wlcore: wlcore@2 { + compatible = "ti,wl1271"; + reg = <2>; + interrupt-parent = <&gpio6>; + interrupts = <14 IRQ_TYPE_LEVEL_HIGH>; + ref-clock-frequency = <38400000>; + }; +}; + &usdhc3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc3>; -- 2.5.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply related [flat|nested] 46+ messages in thread
* [PATCH v2 3/9] ARM: dts: imx6qdl-nitrogen6x: relicense under GPLv2/X11 [not found] ` <1441722886-22798-1-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org> 2015-09-08 14:34 ` [PATCH v2 1/9] ARM: dts: imx6dql-nitrogen6x: add touchscreen support Gary Bisson 2015-09-08 14:34 ` [PATCH v2 2/9] ARM: dts: imx6qdl-nitrogen6x: add wifi wl1271 support Gary Bisson @ 2015-09-08 14:34 ` Gary Bisson 2015-09-08 14:34 ` [PATCH v2 4/9] ARM: dts: imx6qdl-sabrelite: " Gary Bisson ` (5 subsequent siblings) 8 siblings, 0 replies; 46+ messages in thread From: Gary Bisson @ 2015-09-08 14:34 UTC (permalink / raw) To: devicetree-u79uwXL29TY76Z2rM5mHXA Cc: shawn.guo-QSEj5FYQhm4dnm+yROfE0A, kernel-bIcnvbaLZ9MEGnE8C9+IrQ, robh+dt-DgEjT+Ai2ygdnm+yROfE0A, fabio.estevam-KZfg59tc24xl57MIdRCFDg, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, linux-lFZ/pmaqli7XmaaqVzeoHQ, p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ, Gary Bisson Signed-off-by: Gary Bisson <gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org> --- arch/arm/boot/dts/imx6dl-nitrogen6x.dts | 40 +++++++++++++++++++++++++++---- arch/arm/boot/dts/imx6q-nitrogen6x.dts | 40 +++++++++++++++++++++++++++---- arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi | 40 +++++++++++++++++++++++++++---- 3 files changed, 105 insertions(+), 15 deletions(-) diff --git a/arch/arm/boot/dts/imx6dl-nitrogen6x.dts b/arch/arm/boot/dts/imx6dl-nitrogen6x.dts index 5f4d33c..54bc4cd 100644 --- a/arch/arm/boot/dts/imx6dl-nitrogen6x.dts +++ b/arch/arm/boot/dts/imx6dl-nitrogen6x.dts @@ -3,12 +3,42 @@ * Copyright 2012 Freescale Semiconductor, Inc. * Copyright 2011 Linaro Ltd. * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx6q-nitrogen6x.dts b/arch/arm/boot/dts/imx6q-nitrogen6x.dts index a57866b..8088cfc 100644 --- a/arch/arm/boot/dts/imx6q-nitrogen6x.dts +++ b/arch/arm/boot/dts/imx6q-nitrogen6x.dts @@ -3,12 +3,42 @@ * Copyright 2012 Freescale Semiconductor, Inc. * Copyright 2011 Linaro Ltd. * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi index 7a455f7..4699799 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi @@ -3,12 +3,42 @@ * Copyright 2011 Freescale Semiconductor, Inc. * Copyright 2011 Linaro Ltd. * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> -- 2.5.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply related [flat|nested] 46+ messages in thread
* [PATCH v2 4/9] ARM: dts: imx6qdl-sabrelite: relicense under GPLv2/X11 [not found] ` <1441722886-22798-1-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org> ` (2 preceding siblings ...) 2015-09-08 14:34 ` [PATCH v2 3/9] ARM: dts: imx6qdl-nitrogen6x: relicense under GPLv2/X11 Gary Bisson @ 2015-09-08 14:34 ` Gary Bisson 2015-09-08 14:34 ` [PATCH v2 5/9] of: Add Boundary Devices Inc. vendor prefix Gary Bisson ` (4 subsequent siblings) 8 siblings, 0 replies; 46+ messages in thread From: Gary Bisson @ 2015-09-08 14:34 UTC (permalink / raw) To: devicetree-u79uwXL29TY76Z2rM5mHXA Cc: shawn.guo-QSEj5FYQhm4dnm+yROfE0A, kernel-bIcnvbaLZ9MEGnE8C9+IrQ, robh+dt-DgEjT+Ai2ygdnm+yROfE0A, fabio.estevam-KZfg59tc24xl57MIdRCFDg, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, linux-lFZ/pmaqli7XmaaqVzeoHQ, p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ, Gary Bisson Signed-off-by: Gary Bisson <gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org> --- arch/arm/boot/dts/imx6dl-sabrelite.dts | 40 ++++++++++++++++++++++++++++---- arch/arm/boot/dts/imx6q-sabrelite.dts | 40 ++++++++++++++++++++++++++++---- arch/arm/boot/dts/imx6qdl-sabrelite.dtsi | 40 ++++++++++++++++++++++++++++---- 3 files changed, 105 insertions(+), 15 deletions(-) diff --git a/arch/arm/boot/dts/imx6dl-sabrelite.dts b/arch/arm/boot/dts/imx6dl-sabrelite.dts index 2de0447..0f06ca5 100644 --- a/arch/arm/boot/dts/imx6dl-sabrelite.dts +++ b/arch/arm/boot/dts/imx6dl-sabrelite.dts @@ -2,12 +2,42 @@ * Copyright 2011 Freescale Semiconductor, Inc. * Copyright 2011 Linaro Ltd. * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts index 96e4688..66d10d8 100644 --- a/arch/arm/boot/dts/imx6q-sabrelite.dts +++ b/arch/arm/boot/dts/imx6q-sabrelite.dts @@ -2,12 +2,42 @@ * Copyright 2011 Freescale Semiconductor, Inc. * Copyright 2011 Linaro Ltd. * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi index 6adbcdd..77ca488 100644 --- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi @@ -2,12 +2,42 @@ * Copyright 2011 Freescale Semiconductor, Inc. * Copyright 2011 Linaro Ltd. * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> -- 2.5.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply related [flat|nested] 46+ messages in thread
* [PATCH v2 5/9] of: Add Boundary Devices Inc. vendor prefix [not found] ` <1441722886-22798-1-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org> ` (3 preceding siblings ...) 2015-09-08 14:34 ` [PATCH v2 4/9] ARM: dts: imx6qdl-sabrelite: " Gary Bisson @ 2015-09-08 14:34 ` Gary Bisson 2015-09-08 14:34 ` [PATCH v2 6/9] ARM: dts: imx6q-nitrogen6x: change manufacturer to Boundary Devices Gary Bisson ` (3 subsequent siblings) 8 siblings, 0 replies; 46+ messages in thread From: Gary Bisson @ 2015-09-08 14:34 UTC (permalink / raw) To: devicetree-u79uwXL29TY76Z2rM5mHXA Cc: shawn.guo-QSEj5FYQhm4dnm+yROfE0A, kernel-bIcnvbaLZ9MEGnE8C9+IrQ, robh+dt-DgEjT+Ai2ygdnm+yROfE0A, fabio.estevam-KZfg59tc24xl57MIdRCFDg, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, linux-lFZ/pmaqli7XmaaqVzeoHQ, p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ, Gary Bisson This patch adds the vendor prefix for Boundary Devices Inc. which is a supplier of ARM-based single board computers and System-on-Modules for the general embedded market. Website: http://boundarydevices.com/ Signed-off-by: Gary Bisson <gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org> --- Documentation/devicetree/bindings/vendor-prefixes.txt | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index ac5f0c3..4c67e2a 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -34,6 +34,7 @@ avago Avago Technologies avic Shanghai AVIC Optoelectronics Co., Ltd. axis Axis Communications AB bosch Bosch Sensortec GmbH +boundary Boundary Devices Inc. brcm Broadcom Corporation buffalo Buffalo, Inc. calxeda Calxeda -- 2.5.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply related [flat|nested] 46+ messages in thread
* [PATCH v2 6/9] ARM: dts: imx6q-nitrogen6x: change manufacturer to Boundary Devices [not found] ` <1441722886-22798-1-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org> ` (4 preceding siblings ...) 2015-09-08 14:34 ` [PATCH v2 5/9] of: Add Boundary Devices Inc. vendor prefix Gary Bisson @ 2015-09-08 14:34 ` Gary Bisson 2015-09-08 14:34 ` [PATCH v2 7/9] ARM: dts: imx6dl-nitrogen6x: " Gary Bisson ` (2 subsequent siblings) 8 siblings, 0 replies; 46+ messages in thread From: Gary Bisson @ 2015-09-08 14:34 UTC (permalink / raw) To: devicetree-u79uwXL29TY76Z2rM5mHXA Cc: shawn.guo-QSEj5FYQhm4dnm+yROfE0A, kernel-bIcnvbaLZ9MEGnE8C9+IrQ, robh+dt-DgEjT+Ai2ygdnm+yROfE0A, fabio.estevam-KZfg59tc24xl57MIdRCFDg, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, linux-lFZ/pmaqli7XmaaqVzeoHQ, p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ, Gary Bisson Signed-off-by: Gary Bisson <gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org> --- arch/arm/boot/dts/imx6q-nitrogen6x.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/imx6q-nitrogen6x.dts b/arch/arm/boot/dts/imx6q-nitrogen6x.dts index 8088cfc..d168633 100644 --- a/arch/arm/boot/dts/imx6q-nitrogen6x.dts +++ b/arch/arm/boot/dts/imx6q-nitrogen6x.dts @@ -46,8 +46,8 @@ #include "imx6qdl-nitrogen6x.dtsi" / { - model = "Freescale i.MX6 Quad Nitrogen6x Board"; - compatible = "fsl,imx6q-nitrogen6x", "fsl,imx6q"; + model = "Boundary Devices i.MX6 Quad Nitrogen6x Board"; + compatible = "boundary,imx6q-nitrogen6x", "fsl,imx6q"; }; &sata { -- 2.5.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply related [flat|nested] 46+ messages in thread
* [PATCH v2 7/9] ARM: dts: imx6dl-nitrogen6x: change manufacturer to Boundary Devices [not found] ` <1441722886-22798-1-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org> ` (5 preceding siblings ...) 2015-09-08 14:34 ` [PATCH v2 6/9] ARM: dts: imx6q-nitrogen6x: change manufacturer to Boundary Devices Gary Bisson @ 2015-09-08 14:34 ` Gary Bisson 2015-09-08 14:34 ` [PATCH v2 8/9] ARM: dts: imx: add Boundary Devices Nitrogen6_Max board Gary Bisson 2015-09-08 14:34 ` [PATCH v2 9/9] ARM: dts: imx: add Boundary Devices Nitrogen6_Lite board Gary Bisson 8 siblings, 0 replies; 46+ messages in thread From: Gary Bisson @ 2015-09-08 14:34 UTC (permalink / raw) To: devicetree-u79uwXL29TY76Z2rM5mHXA Cc: shawn.guo-QSEj5FYQhm4dnm+yROfE0A, kernel-bIcnvbaLZ9MEGnE8C9+IrQ, robh+dt-DgEjT+Ai2ygdnm+yROfE0A, fabio.estevam-KZfg59tc24xl57MIdRCFDg, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, linux-lFZ/pmaqli7XmaaqVzeoHQ, p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ, Gary Bisson Signed-off-by: Gary Bisson <gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org> --- arch/arm/boot/dts/imx6dl-nitrogen6x.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/imx6dl-nitrogen6x.dts b/arch/arm/boot/dts/imx6dl-nitrogen6x.dts index 54bc4cd..8398f97 100644 --- a/arch/arm/boot/dts/imx6dl-nitrogen6x.dts +++ b/arch/arm/boot/dts/imx6dl-nitrogen6x.dts @@ -46,6 +46,6 @@ #include "imx6qdl-nitrogen6x.dtsi" / { - model = "Freescale i.MX6 DualLite Nitrogen6x Board"; - compatible = "fsl,imx6dl-nitrogen6x", "fsl,imx6dl"; + model = "Boundary Devices i.MX6 DualLite Nitrogen6x Board"; + compatible = "boundary,imx6dl-nitrogen6x", "fsl,imx6dl"; }; -- 2.5.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply related [flat|nested] 46+ messages in thread
* [PATCH v2 8/9] ARM: dts: imx: add Boundary Devices Nitrogen6_Max board [not found] ` <1441722886-22798-1-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org> ` (6 preceding siblings ...) 2015-09-08 14:34 ` [PATCH v2 7/9] ARM: dts: imx6dl-nitrogen6x: " Gary Bisson @ 2015-09-08 14:34 ` Gary Bisson 2015-09-08 14:34 ` [PATCH v2 9/9] ARM: dts: imx: add Boundary Devices Nitrogen6_Lite board Gary Bisson 8 siblings, 0 replies; 46+ messages in thread From: Gary Bisson @ 2015-09-08 14:34 UTC (permalink / raw) To: devicetree-u79uwXL29TY76Z2rM5mHXA Cc: shawn.guo-QSEj5FYQhm4dnm+yROfE0A, kernel-bIcnvbaLZ9MEGnE8C9+IrQ, robh+dt-DgEjT+Ai2ygdnm+yROfE0A, fabio.estevam-KZfg59tc24xl57MIdRCFDg, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, linux-lFZ/pmaqli7XmaaqVzeoHQ, p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ, Gary Bisson Based on i.MX6 Quad with 4GB of DDR3. http://boundarydevices.com/product/nitrogen6max/ Signed-off-by: Gary Bisson <gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org> --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/imx6q-nitrogen6_max.dts | 53 ++ arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi | 873 +++++++++++++++++++++++++++ 3 files changed, 927 insertions(+) create mode 100644 arch/arm/boot/dts/imx6q-nitrogen6_max.dts create mode 100644 arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 233159d..cc29515 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -313,6 +313,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6q-gw552x.dtb \ imx6q-hummingboard.dtb \ imx6q-nitrogen6x.dtb \ + imx6q-nitrogen6_max.dtb \ imx6q-phytec-pbab01.dtb \ imx6q-rex-pro.dtb \ imx6q-sabreauto.dtb \ diff --git a/arch/arm/boot/dts/imx6q-nitrogen6_max.dts b/arch/arm/boot/dts/imx6q-nitrogen6_max.dts new file mode 100644 index 0000000..d417457 --- /dev/null +++ b/arch/arm/boot/dts/imx6q-nitrogen6_max.dts @@ -0,0 +1,53 @@ +/* + * Copyright 2015 Boundary Devices, Inc. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ +/dts-v1/; + +#include "imx6q.dtsi" +#include "imx6qdl-nitrogen6_max.dtsi" + +/ { + model = "Boundary Devices i.MX6 Quad Nitrogen6_MAX Board"; + compatible = "boundary,imx6q-nitrogen6_max", "fsl,imx6q"; +}; + +&sata { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi new file mode 100644 index 0000000..6f4917b --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi @@ -0,0 +1,873 @@ +/* + * Copyright 2015 Boundary Devices, Inc. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + chosen { + stdout-path = &uart2; + }; + + memory { + reg = <0x10000000 0xF0000000>; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_1p8v: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "1P8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + reg_2p5v: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "2P5V"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; + + reg_3p3v: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_usb_otg_vbus: regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usb_h1_vbus: regulator@4 { + compatible = "regulator-fixed"; + reg = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh1>; + regulator-name = "usb_h1_vbus"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_wlan_vmmc: regulator@5 { + compatible = "regulator-fixed"; + reg = <5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wlan_vmmc>; + regulator-name = "reg_wlan_vmmc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio6 15 GPIO_ACTIVE_HIGH>; + startup-delay-us = <70000>; + enable-active-high; + }; + + reg_can_xcvr: regulator@6 { + compatible = "regulator-fixed"; + reg = <6>; + regulator-name = "CAN XCVR"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can_xcvr>; + gpio = <&gpio1 2 GPIO_ACTIVE_LOW>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_keys>; + + power { + label = "Power Button"; + gpios = <&gpio2 3 GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + gpio-key,wakeup; + }; + + menu { + label = "Menu"; + gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; + linux,code = <KEY_MENU>; + }; + + home { + label = "Home"; + gpios = <&gpio2 4 GPIO_ACTIVE_LOW>; + linux,code = <KEY_HOME>; + }; + + back { + label = "Back"; + gpios = <&gpio2 2 GPIO_ACTIVE_LOW>; + linux,code = <KEY_BACK>; + }; + + volume-up { + label = "Volume Up"; + gpios = <&gpio7 13 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + }; + + volume-down { + label = "Volume Down"; + gpios = <&gpio7 1 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEDOWN>; + }; + }; + + i2cmux@2 { + compatible = "i2c-mux-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2mux>; + #address-cells = <1>; + #size-cells = <0>; + mux-gpios = <&gpio3 20 GPIO_ACTIVE_HIGH + &gpio4 15 GPIO_ACTIVE_HIGH>; + i2c-parent = <&i2c2>; + idle-state = <0>; + + i2c2@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c2@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + i2cmux@3 { + compatible = "i2c-mux-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3mux>; + #address-cells = <1>; + #size-cells = <0>; + mux-gpios = <&gpio2 25 GPIO_ACTIVE_HIGH>; + i2c-parent = <&i2c3>; + idle-state = <0>; + + i2c3@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + leds { + compatible = "gpio-leds"; + + speaker-enable { + gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>; + retain-state-suspended; + default-state = "off"; + }; + + ttymxc4-rs232 { + gpios = <&gpio6 10 GPIO_ACTIVE_HIGH>; + retain-state-suspended; + default-state = "on"; + }; + }; + + backlight_lcd: backlight_lcd { + compatible = "pwm-backlight"; + pwms = <&pwm1 0 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <7>; + power-supply = <®_3p3v>; + status = "okay"; + }; + + backlight_lvds0: backlight_lvds0 { + compatible = "pwm-backlight"; + pwms = <&pwm4 0 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <7>; + power-supply = <®_3p3v>; + status = "okay"; + }; + + backlight_lvds1: backlight_lvds1 { + compatible = "pwm-backlight"; + pwms = <&pwm2 0 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <7>; + power-supply = <®_3p3v>; + status = "okay"; + }; + + lcd_display: display@di0 { + compatible = "fsl,imx-parallel-display"; + #address-cells = <1>; + #size-cells = <0>; + interface-pix-fmt = "bgr666"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_j15>; + status = "okay"; + + port@0 { + reg = <0>; + + lcd_display_in: endpoint { + remote-endpoint = <&ipu1_di0_disp0>; + }; + }; + + port@1 { + reg = <1>; + + lcd_display_out: endpoint { + remote-endpoint = <&lcd_panel_in>; + }; + }; + }; + + panel_lcd { + compatible = "okaya,rs800480t-7x0gp"; + backlight = <&backlight_lcd>; + + port { + lcd_panel_in: endpoint { + remote-endpoint = <&lcd_display_out>; + }; + }; + }; + + panel_lvds0 { + compatible = "hannstar,hsd100pxn1"; + backlight = <&backlight_lvds0>; + + port { + panel_in_lvds0: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + }; + + panel_lvds1 { + compatible = "hannstar,hsd100pxn1"; + backlight = <&backlight_lvds1>; + + port { + panel_in_lvds1: endpoint { + remote-endpoint = <&lvds1_out>; + }; + }; + }; + + sound { + compatible = "fsl,imx6q-nitrogen6_max-sgtl5000", + "fsl,imx-audio-sgtl5000"; + model = "imx6q-nitrogen6_max-sgtl5000"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sgtl5000>; + ssi-controller = <&ssi1>; + audio-codec = <&codec>; + audio-routing = + "MIC_IN", "Mic Jack", + "Mic Jack", "Mic Bias", + "Headphone Jack", "HP_OUT"; + mux-int-port = <1>; + mux-ext-port = <3>; + }; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux>; + status = "okay"; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can1>; + xceiver-supply = <®_can_xcvr>; + status = "okay"; +}; + +&clks { + assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, + <&clks IMX6QDL_CLK_LDB_DI1_SEL>; + assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>, + <&clks IMX6QDL_CLK_PLL3_USB_OTG>; +}; + +&ecspi1 { + fsl,spi-num-chipselects = <1>; + cs-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + status = "okay"; + + flash: m25p80@0 { + compatible = "microchip,sst25vf016b"; + spi-max-frequency = <20000000>; + reg = <0>; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rgmii"; + phy-reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>; + txen-skew-ps = <0>; + txc-skew-ps = <3000>; + rxdv-skew-ps = <0>; + rxc-skew-ps = <3000>; + rxd0-skew-ps = <0>; + rxd1-skew-ps = <0>; + rxd2-skew-ps = <0>; + rxd3-skew-ps = <0>; + txd0-skew-ps = <0>; + txd1-skew-ps = <0>; + txd2-skew-ps = <0>; + txd3-skew-ps = <0>; + interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>, + <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>; + status = "okay"; +}; + +&hdmi { + ddc-i2c-bus = <&i2c2>; + status = "okay"; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + codec: sgtl5000@0a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + clocks = <&clks 201>; + VDDA-supply = <®_2p5v>; + VDDIO-supply = <®_3p3v>; + }; + + rtc: rtc@68 { + compatible = "st,rv4162"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rv4162>; + reg = <0x68>; + interrupts-extended = <&gpio4 6 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + egalax_ts@04 { + compatible = "eeti,egalax_ts"; + reg = <0x04>; + interrupt-parent = <&gpio1>; + interrupts = <9 IRQ_TYPE_EDGE_FALLING>; + wakeup-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; + }; + + ft5x06_ts@38 { + compatible = "edt,edt-ft5x06"; + reg = <0x38>; + interrupt-parent = <&gpio1>; + interrupts = <9 IRQ_TYPE_EDGE_FALLING>; + wakeup-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; + }; +}; + +&iomuxc { + imx6q-nitrogen6_max { + pinctrl_audmux: audmuxgrp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0 + MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0 + MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0 + MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0 + >; + }; + + pinctrl_can1: can1grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b0 + MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b0 + >; + }; + + pinctrl_can_xcvr: can-xcvrgrp { + fsl,pins = < + /* Flexcan XCVR enable */ + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0 + >; + }; + + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 + MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 + MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 + MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x000b1 + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x100b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x100b0 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x100b0 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x100b0 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x100b0 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x100b0 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x100b0 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x100b0 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x100b0 + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 + /* Phy reset */ + MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x0f0b0 + MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0 + MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1 + >; + }; + + pinctrl_gpio_keys: gpio_keysgrp { + fsl,pins = < + /* Power Button */ + MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0 + /* Menu Button */ + MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0 + /* Home Button */ + MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x1b0b0 + /* Back Button */ + MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0 + /* Volume Up Button */ + MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x1b0b0 + /* Volume Down Button */ + MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x1b0b0 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c2mux: i2c2muxgrp { + fsl,pins = < + /* ov5642 camera i2c enable */ + MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x000b0 + /* ov5640_mipi camera i2c enable */ + MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x000b0 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_16__I2C3_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c3mux: i2c3muxgrp { + fsl,pins = < + /* PCIe I2C enable */ + MX6QDL_PAD_EIM_OE__GPIO2_IO25 0x000b0 + >; + }; + + pinctrl_j15: j15grp { + fsl,pins = < + MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10 + MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x10 + MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x10 + MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x10 + MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x10 + MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x10 + MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x10 + MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x10 + MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x10 + MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x10 + MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x10 + MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x10 + MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x10 + MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x10 + MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x10 + MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x10 + MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x10 + MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x10 + MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x10 + MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x10 + MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x10 + MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x10 + MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x10 + MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x10 + MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x10 + MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x10 + MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x10 + MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x10 + >; + }; + + pinctrl_pcie: pciegrp { + fsl,pins = < + /* PCIe reset */ + MX6QDL_PAD_EIM_BCLK__GPIO6_IO31 0x000b0 + >; + }; + + pinctrl_pwm1: pwm1grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1 + >; + }; + + pinctrl_pwm2: pwm2grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1 + >; + }; + + pinctrl_pwm3: pwm3grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1 + >; + }; + + pinctrl_pwm4: pwm4grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1 + >; + }; + + pinctrl_rv4162: rv4162grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0 + >; + }; + + pinctrl_sgtl5000: sgtl5000grp { + fsl,pins = < + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x000b0 + MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x1b0b0 + MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart5: uart5grp { + fsl,pins = < + MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x130b1 + MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x030b1 + /* RS485 RX Enable: pull up */ + MX6QDL_PAD_NANDF_RB0__GPIO6_IO10 0x1b0b1 + /* RS485 DEN: pull down */ + MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x030b1 + /* RS485/!RS232 Select: pull down (rs232) */ + MX6QDL_PAD_EIM_CS1__GPIO2_IO24 0x030b1 + /* ON: pull down */ + MX6QDL_PAD_NANDF_ALE__GPIO6_IO08 0x030b1 + >; + }; + + pinctrl_usbh1: usbh1grp { + fsl,pins = < + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x0b0b0 + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 + MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x1b0b0 + /* power enable, high active */ + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x000b0 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x100b0 + MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0 + >; + }; + + pinctrl_usdhc4: usdhc4grp { + fsl,pins = < + MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059 + MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059 + MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059 + MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059 + MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059 + MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059 + MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059 + MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059 + MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059 + MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059 + >; + }; + + pinctrl_wlan_vmmc: wlan_vmmcgrp { + fsl,pins = < + MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x100b0 + MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x000b0 + MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x000b0 + MX6QDL_PAD_SD1_CLK__OSC32K_32K_OUT 0x000b0 + >; + }; + }; +}; + +&ipu1_di0_disp0 { + remote-endpoint = <&lcd_display_in>; +}; + +&ldb { + status = "okay"; + + lvds-channel@0 { + fsl,data-mapping = "spwg"; + fsl,data-width = <18>; + status = "okay"; + + port@4 { + reg = <4>; + + lvds0_out: endpoint { + remote-endpoint = <&panel_in_lvds0>; + }; + }; + }; + + lvds-channel@1 { + fsl,data-mapping = "spwg"; + fsl,data-width = <18>; + status = "okay"; + + port@4 { + reg = <4>; + + lvds1_out: endpoint { + remote-endpoint = <&panel_in_lvds1>; + }; + }; + }; +}; + +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie>; + reset-gpio = <&gpio6 31 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "okay"; +}; + +&pwm2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm2>; + status = "okay"; +}; + +&pwm3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm3>; + status = "okay"; +}; + +&pwm4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm4>; + status = "okay"; +}; + +&ssi1 { + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + status = "okay"; +}; + +&usbh1 { + vbus-supply = <®_usb_h1_vbus>; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_usb_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + disable-over-current; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + bus-width = <4>; + non-removable; + vmmc-supply = <®_wlan_vmmc>; + cap-power-off-card; + keep-power-in-suspend; + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + wlcore: wlcore@2 { + compatible = "ti,wl1271"; + reg = <2>; + interrupt-parent = <&gpio6>; + interrupts = <11 IRQ_TYPE_LEVEL_HIGH>; + ref-clock-frequency = <38400000>; + }; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; + bus-width = <4>; + vmmc-supply = <®_3p3v>; + status = "okay"; +}; + +&usdhc4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc4>; + bus-width = <8>; + non-removable; + vmmc-supply = <®_1p8v>; + keep-power-in-suspend; + status = "okay"; +}; -- 2.5.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply related [flat|nested] 46+ messages in thread
* [PATCH v2 9/9] ARM: dts: imx: add Boundary Devices Nitrogen6_Lite board [not found] ` <1441722886-22798-1-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org> ` (7 preceding siblings ...) 2015-09-08 14:34 ` [PATCH v2 8/9] ARM: dts: imx: add Boundary Devices Nitrogen6_Max board Gary Bisson @ 2015-09-08 14:34 ` Gary Bisson 8 siblings, 0 replies; 46+ messages in thread From: Gary Bisson @ 2015-09-08 14:34 UTC (permalink / raw) To: devicetree-u79uwXL29TY76Z2rM5mHXA Cc: shawn.guo-QSEj5FYQhm4dnm+yROfE0A, kernel-bIcnvbaLZ9MEGnE8C9+IrQ, robh+dt-DgEjT+Ai2ygdnm+yROfE0A, fabio.estevam-KZfg59tc24xl57MIdRCFDg, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, linux-lFZ/pmaqli7XmaaqVzeoHQ, p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ, Gary Bisson Based on an i.MX6 Solo with 512MB DDR3. http://boundarydevices.com/product/nitrogen6_lite/ Signed-off-by: Gary Bisson <gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org> --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/imx6dl-nit6xlite.dts | 49 +++ arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi | 631 +++++++++++++++++++++++++++++++ 3 files changed, 681 insertions(+) create mode 100644 arch/arm/boot/dts/imx6dl-nit6xlite.dts create mode 100644 arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index cc29515..b4afb42 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -284,6 +284,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6dl-gw551x.dtb \ imx6dl-gw552x.dtb \ imx6dl-hummingboard.dtb \ + imx6dl-nit6xlite.dtb \ imx6dl-nitrogen6x.dtb \ imx6dl-phytec-pbab01.dtb \ imx6dl-rex-basic.dtb \ diff --git a/arch/arm/boot/dts/imx6dl-nit6xlite.dts b/arch/arm/boot/dts/imx6dl-nit6xlite.dts new file mode 100644 index 0000000..e0161e4 --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-nit6xlite.dts @@ -0,0 +1,49 @@ +/* + * Copyright 2015 Boundary Devices, Inc. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ +/dts-v1/; + +#include "imx6dl.dtsi" +#include "imx6qdl-nit6xlite.dtsi" + +/ { + model = "Boundary Devices i.MX6 Solo Nitrogen6_Lite Board"; + compatible = "boundary,imx6dl-nit6xlite", "fsl,imx6dl"; +}; diff --git a/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi b/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi new file mode 100644 index 0000000..a3b86ed --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi @@ -0,0 +1,631 @@ +/* + * Copyright 2015 Boundary Devices, Inc. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + chosen { + stdout-path = &uart2; + }; + + memory { + reg = <0x10000000 0x20000000>; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_2p5v: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "2P5V"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; + + reg_3p3v: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_usb_otg_vbus: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_wlan_vmmc: regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wlan_vmmc>; + regulator-name = "reg_wlan_vmmc"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&gpio6 7 GPIO_ACTIVE_HIGH>; + startup-delay-us = <70000>; + enable-active-high; + }; + }; + + bt_rfkill { + compatible = "rfkill-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_bt_rfkill>; + gpios = <&gpio6 8 GPIO_ACTIVE_HIGH>; + name = "bt_rfkill"; + type = <2>; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_keys>; + + home { + label = "Home"; + gpios = <&gpio7 13 IRQ_TYPE_LEVEL_LOW>; + linux,code = <102>; + }; + + back { + label = "Back"; + gpios = <&gpio4 5 IRQ_TYPE_LEVEL_LOW>; + linux,code = <158>; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_leds>; + + j14-pin1 { + gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; + retain-state-suspended; + default-state = "off"; + }; + + j14-pin3 { + gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; + retain-state-suspended; + default-state = "off"; + }; + + j14-pins8-9 { + gpios = <&gpio3 29 GPIO_ACTIVE_LOW>; + retain-state-suspended; + default-state = "off"; + }; + + j46-pin2 { + gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; + retain-state-suspended; + default-state = "off"; + }; + + j46-pin3 { + gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; + retain-state-suspended; + default-state = "off"; + }; + }; + + backlight_lcd { + compatible = "pwm-backlight"; + pwms = <&pwm1 0 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <7>; + power-supply = <®_3p3v>; + status = "okay"; + }; + + backlight_lvds0: backlight_lvds0 { + compatible = "pwm-backlight"; + pwms = <&pwm4 0 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <7>; + power-supply = <®_3p3v>; + status = "okay"; + }; + + panel_lvds0 { + compatible = "hannstar,hsd100pxn1"; + backlight = <&backlight_lvds0>; + + port { + panel_in_lvds0: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + }; + + sound { + compatible = "fsl,imx6dl-nit6xlite-sgtl5000", + "fsl,imx-audio-sgtl5000"; + model = "imx6dl-nit6xlite-sgtl5000"; + ssi-controller = <&ssi1>; + audio-codec = <&codec>; + audio-routing = + "MIC_IN", "Mic Jack", + "Mic Jack", "Mic Bias", + "Headphone Jack", "HP_OUT"; + mux-int-port = <1>; + mux-ext-port = <3>; + }; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux>; + status = "okay"; +}; + +&clks { + assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, + <&clks IMX6QDL_CLK_LDB_DI1_SEL>; + assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>, + <&clks IMX6QDL_CLK_PLL3_USB_OTG>; +}; + +&ecspi1 { + fsl,spi-num-chipselects = <1>; + cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + status = "okay"; + + flash: m25p80@0 { + compatible = "microchip,sst25vf016b"; + spi-max-frequency = <20000000>; + reg = <0>; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rgmii"; + phy-reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>; + txen-skew-ps = <0>; + txc-skew-ps = <3000>; + rxdv-skew-ps = <0>; + rxc-skew-ps = <3000>; + rxd0-skew-ps = <0>; + rxd1-skew-ps = <0>; + rxd2-skew-ps = <0>; + rxd3-skew-ps = <0>; + txd0-skew-ps = <0>; + txd1-skew-ps = <0>; + txd2-skew-ps = <0>; + txd3-skew-ps = <0>; + interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>, + <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>; + status = "okay"; +}; + +&hdmi { + ddc-i2c-bus = <&i2c2>; + status = "okay"; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + codec: sgtl5000@0a { + compatible = "fsl,sgtl5000"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sgtl5000>; + reg = <0x0a>; + clocks = <&clks 201>; + VDDA-supply = <®_2p5v>; + VDDIO-supply = <®_3p3v>; + }; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + egalax_ts@04 { + compatible = "eeti,egalax_ts"; + reg = <0x04>; + interrupt-parent = <&gpio1>; + interrupts = <9 IRQ_TYPE_EDGE_FALLING>; + wakeup-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; + }; + + ft5x06_ts@38 { + compatible = "edt,edt-ft5x06"; + reg = <0x38>; + interrupt-parent = <&gpio1>; + interrupts = <9 IRQ_TYPE_EDGE_FALLING>; + wakeup-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; + }; + + isl1208@6f { + compatible = "isil,isl1208"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rtc>; + reg = <0x6f>; + interrupts-extended = <&gpio2 26 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_j10>; + pinctrl-1 = <&pinctrl_j28>; + + imx6dl-nit6xlite { + pinctrl_audmux: audmuxgrp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0 + MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0 + MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0 + MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0 + >; + }; + + pinctrl_bt_rfkill: bt_rfkillgrp { + fsl,pins = < + /* BT wake */ + MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0 + /* BT reset */ + MX6QDL_PAD_NANDF_ALE__GPIO6_IO08 0x0b0b0 + /* BT reg en */ + MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x1b0b0 + /* BT host wake irq */ + MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x100b0 + >; + }; + + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 + MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 + MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 + MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x000b1 + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x100b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x100b0 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x100b0 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x100b0 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x100b0 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x100b0 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x100b0 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x100b0 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x100b0 + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 + /* Phy reset */ + MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x0f0b0 + MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0 + MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1 + >; + }; + + pinctrl_gpio_keys: gpio_keysgrp { + fsl,pins = < + /* Home Button: J14 pin 5 */ + MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x1b0b0 + /* Back Button: J14 pin 7 */ + MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x1b0b0 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_16__I2C3_SDA 0x4001b8b1 + /* Touch IRQ: J7 pin 4 */ + MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0 + /* tcs2004 IRQ */ + MX6QDL_PAD_EIM_LBA__GPIO2_IO27 0x1b0b0 + /* tsc2004 reset */ + MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x0b0b0 + >; + }; + + pinctrl_j10: j10grp { + fsl,pins = < + /* Broadcom WiFi module pins */ + MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x1b0b0 + MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0 + MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0 + MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x1b0b0 + MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09 0x0b0b0 + MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x1b0b0 + MX6QDL_PAD_SD1_CLK__OSC32K_32K_OUT 0x000b0 + >; + }; + + pinctrl_j28: j28grp { + fsl,pins = < + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0 + >; + }; + + pinctrl_leds: ledsgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x0b0b0 + MX6QDL_PAD_GPIO_3__GPIO1_IO03 0x0b0b0 + MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x030b0 + MX6QDL_PAD_GPIO_7__GPIO1_IO07 0x0b0b0 + MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0b0b0 + >; + }; + + pinctrl_pwm1: pwm1grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1 + >; + }; + + pinctrl_pwm3: pwm3grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1 + >; + }; + + pinctrl_pwm4: pwm4grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1 + >; + }; + + pinctrl_wlan_vmmc: wlan_vmmcgrp { + fsl,pins = < + MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x030b0 + >; + }; + + pinctrl_rtc: rtcgrp { + fsl,pins = < + MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x1b0b0 + >; + }; + + pinctrl_sgtl5000: sgtl5000grp { + fsl,pins = < + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x000b0 + MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x1b0b0 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D23__UART3_CTS_B 0x1b0b1 + MX6QDL_PAD_EIM_D31__UART3_RTS_B 0x1b0b1 + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 + MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x1b0b0 + /* power enable, high active */ + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x000b0 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0 + >; + }; + }; +}; + +&ldb { + status = "okay"; + + lvds-channel@0 { + fsl,data-mapping = "spwg"; + fsl,data-width = <18>; + status = "okay"; + + port@4 { + reg = <4>; + + lvds0_out: endpoint { + remote-endpoint = <&panel_in_lvds0>; + }; + }; + }; +}; + +&pcie { + status = "okay"; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "okay"; +}; + +&pwm3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm3>; + status = "okay"; +}; + +&pwm4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm4>; + status = "okay"; +}; + +&ssi1 { + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + fsl,uart-has-rtscts; + status = "okay"; +}; + +&usbh1 { + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_usb_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + disable-over-current; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + bus-width = <4>; + non-removable; + vmmc-supply = <®_3p3v>; + vqmmc-supply = <®_wlan_vmmc>; + vqmmc-1-8-v; + ocr-limit = <0x180>; /* 1.65v - 2.1v */ + cap-power-off-card; + keep-power-in-suspend; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; + vmmc-supply = <®_3p3v>; + status = "okay"; +}; -- 2.5.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply related [flat|nested] 46+ messages in thread
* [PATCH v3 0/9] ARM: dts: update Boundary Devices boards support [not found] ` <1441645069-27263-1-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org> ` (4 preceding siblings ...) 2015-09-08 14:34 ` [PATCH v2 0/9] ARM: dts: update Boundary Devices boards support Gary Bisson @ 2015-09-09 12:30 ` Gary Bisson [not found] ` <1441801853-10264-1-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org> 2015-09-30 13:46 ` [RESEND][PATCH " Gary Bisson 6 siblings, 1 reply; 46+ messages in thread From: Gary Bisson @ 2015-09-09 12:30 UTC (permalink / raw) To: devicetree-u79uwXL29TY76Z2rM5mHXA Cc: shawn.guo-QSEj5FYQhm4dnm+yROfE0A, kernel-bIcnvbaLZ9MEGnE8C9+IrQ, robh+dt-DgEjT+Ai2ygdnm+yROfE0A, fabio.estevam-KZfg59tc24xl57MIdRCFDg, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, linux-lFZ/pmaqli7XmaaqVzeoHQ, p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ, Gary Bisson Hi all, This series is a follow-up to the previous series that added LCD display support. http://lists.infradead.org/pipermail/linux-arm-kernel/2015-August/364425.html This one aims at adding touchscreen and WiFi support for Nitrogen6x as well as adding two boards: Nitrogen6_Max and Nit6xlite. It also takes care of updating the licenses to be GPLv2/X11. The series has been tested against linux-next tag next-20150909. Note that imx_v6_v7_defconfig has been used with the following additions: CONFIG_TOUCHSCREEN_EDT_FT5X06=y CONFIG_I2C_MUX_GPIO=y CONFIG_RTC_DRV_M41T80=y Modifications: v2->v3: - Rename nodes to general class of device as suggested by Philipp and Russell. - Remove useless wakeup-gpio field for edt,ft5x06 touchscreen - Add missing muxing for interrupt GPIO - Rebased on next-20150909 v1->v2: - Add Boundary Devices Inc. to vendor prefixes - Relicense devices trees to GPLv2/X11 as suggested by Fabio for: - Nitrogen6x - SabreLite - Nit6xLite - Nitrogen6_MAX - Change manufacturer to Boundary Devices as suggested by Fabio for: - Nitrogen6x - Nit6xLite - Nitrogen6_MAX - Fixed missing macros for gpio/irq values as suggested by Philipp. - Rebased on next-20150908 Regards, Gary Gary Bisson (9): ARM: dts: imx6dql-nitrogen6x: add touchscreen support ARM: dts: imx6qdl-nitrogen6x: add wifi wl1271 support ARM: dts: imx6qdl-nitrogen6x: relicense under GPLv2/X11 ARM: dts: imx6qdl-sabrelite: relicense under GPLv2/X11 of: Add Boundary Devices Inc. vendor prefix ARM: dts: imx6q-nitrogen6x: change manufacturer to Boundary Devices ARM: dts: imx6dl-nitrogen6x: change manufacturer to Boundary Devices ARM: dts: imx: add Boundary Devices Nitrogen6_Max board ARM: dts: imx: add Boundary Devices Nitrogen6_Lite board .../devicetree/bindings/vendor-prefixes.txt | 1 + arch/arm/boot/dts/Makefile | 2 + arch/arm/boot/dts/imx6dl-nit6xlite.dts | 49 ++ arch/arm/boot/dts/imx6dl-nitrogen6x.dts | 44 +- arch/arm/boot/dts/imx6dl-sabrelite.dts | 40 +- arch/arm/boot/dts/imx6q-nitrogen6_max.dts | 53 ++ arch/arm/boot/dts/imx6q-nitrogen6x.dts | 44 +- arch/arm/boot/dts/imx6q-sabrelite.dts | 40 +- ...6qdl-nitrogen6x.dtsi => imx6qdl-nit6xlite.dtsi} | 396 ++++++---- arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi | 873 +++++++++++++++++++++ arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi | 111 ++- arch/arm/boot/dts/imx6qdl-sabrelite.dtsi | 40 +- 12 files changed, 1523 insertions(+), 170 deletions(-) create mode 100644 arch/arm/boot/dts/imx6dl-nit6xlite.dts create mode 100644 arch/arm/boot/dts/imx6q-nitrogen6_max.dts copy arch/arm/boot/dts/{imx6qdl-nitrogen6x.dtsi => imx6qdl-nit6xlite.dtsi} (50%) create mode 100644 arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi -- 2.5.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 46+ messages in thread
[parent not found: <1441801853-10264-1-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>]
* [PATCH v3 1/9] ARM: dts: imx6dql-nitrogen6x: add touchscreen support [not found] ` <1441801853-10264-1-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org> @ 2015-09-09 12:30 ` Gary Bisson 2015-09-09 12:30 ` [PATCH v3 2/9] ARM: dts: imx6qdl-nitrogen6x: add wifi wl1271 support Gary Bisson ` (8 subsequent siblings) 9 siblings, 0 replies; 46+ messages in thread From: Gary Bisson @ 2015-09-09 12:30 UTC (permalink / raw) To: devicetree-u79uwXL29TY76Z2rM5mHXA Cc: shawn.guo-QSEj5FYQhm4dnm+yROfE0A, kernel-bIcnvbaLZ9MEGnE8C9+IrQ, robh+dt-DgEjT+Ai2ygdnm+yROfE0A, fabio.estevam-KZfg59tc24xl57MIdRCFDg, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, linux-lFZ/pmaqli7XmaaqVzeoHQ, p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ, Gary Bisson This patch adds the different touchscreens that can be connected using the displays available for this board. http://boundarydevices.com/product-category/displays/ Signed-off-by: Gary Bisson <gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org> --- arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi index 340bc8e..5466368 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi @@ -247,6 +247,21 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c3>; status = "okay"; + + touchscreen@04 { + compatible = "eeti,egalax_ts"; + reg = <0x04>; + interrupt-parent = <&gpio1>; + interrupts = <9 IRQ_TYPE_EDGE_FALLING>; + wakeup-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; + }; + + touchscreen@38 { + compatible = "edt,edt-ft5x06"; + reg = <0x38>; + interrupt-parent = <&gpio1>; + interrupts = <9 IRQ_TYPE_EDGE_FALLING>; + }; }; &iomuxc { @@ -258,6 +273,7 @@ fsl,pins = < /* SGTL5000 sys_mclk */ MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x030b0 + MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0 >; }; -- 2.5.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply related [flat|nested] 46+ messages in thread
* [PATCH v3 2/9] ARM: dts: imx6qdl-nitrogen6x: add wifi wl1271 support [not found] ` <1441801853-10264-1-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org> 2015-09-09 12:30 ` [PATCH v3 1/9] ARM: dts: imx6dql-nitrogen6x: add touchscreen support Gary Bisson @ 2015-09-09 12:30 ` Gary Bisson 2015-09-09 12:30 ` [PATCH v3 3/9] ARM: dts: imx6qdl-nitrogen6x: relicense under GPLv2/X11 Gary Bisson ` (7 subsequent siblings) 9 siblings, 0 replies; 46+ messages in thread From: Gary Bisson @ 2015-09-09 12:30 UTC (permalink / raw) To: devicetree-u79uwXL29TY76Z2rM5mHXA Cc: shawn.guo-QSEj5FYQhm4dnm+yROfE0A, kernel-bIcnvbaLZ9MEGnE8C9+IrQ, robh+dt-DgEjT+Ai2ygdnm+yROfE0A, fabio.estevam-KZfg59tc24xl57MIdRCFDg, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, linux-lFZ/pmaqli7XmaaqVzeoHQ, p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ, Gary Bisson Signed-off-by: Gary Bisson <gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org> --- arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi | 55 +++++++++++++++++++++++++++++++ 1 file changed, 55 insertions(+) diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi index 5466368..2ce7cb4 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi @@ -65,6 +65,19 @@ pinctrl-0 = <&pinctrl_can_xcvr>; gpio = <&gpio1 2 GPIO_ACTIVE_LOW>; }; + + reg_wlan_vmmc: regulator@4 { + compatible = "regulator-fixed"; + reg = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wlan_vmmc>; + regulator-name = "reg_wlan_vmmc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio6 15 GPIO_ACTIVE_HIGH>; + startup-delay-us = <70000>; + enable-active-high; + }; }; gpio-keys { @@ -411,6 +424,18 @@ >; }; + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17071 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10071 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17071 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17071 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17071 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17071 + MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x000b0 + >; + }; + pinctrl_usdhc3: usdhc3grp { fsl,pins = < MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 @@ -434,6 +459,15 @@ MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x1b0b0 /* CD */ >; }; + + pinctrl_wlan_vmmc: wlan_vmmcgrp { + fsl,pins = < + MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x100b0 + MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x000b0 + MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x000b0 + MX6QDL_PAD_SD1_CLK__OSC32K_32K_OUT 0x000b0 + >; + }; }; }; @@ -505,6 +539,27 @@ status = "okay"; }; +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + bus-width = <4>; + non-removable; + vmmc-supply = <®_wlan_vmmc>; + cap-power-off-card; + keep-power-in-suspend; + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + wlcore: wlcore@2 { + compatible = "ti,wl1271"; + reg = <2>; + interrupt-parent = <&gpio6>; + interrupts = <14 IRQ_TYPE_LEVEL_HIGH>; + ref-clock-frequency = <38400000>; + }; +}; + &usdhc3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc3>; -- 2.5.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply related [flat|nested] 46+ messages in thread
* [PATCH v3 3/9] ARM: dts: imx6qdl-nitrogen6x: relicense under GPLv2/X11 [not found] ` <1441801853-10264-1-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org> 2015-09-09 12:30 ` [PATCH v3 1/9] ARM: dts: imx6dql-nitrogen6x: add touchscreen support Gary Bisson 2015-09-09 12:30 ` [PATCH v3 2/9] ARM: dts: imx6qdl-nitrogen6x: add wifi wl1271 support Gary Bisson @ 2015-09-09 12:30 ` Gary Bisson 2015-09-09 12:30 ` [PATCH v3 4/9] ARM: dts: imx6qdl-sabrelite: " Gary Bisson ` (6 subsequent siblings) 9 siblings, 0 replies; 46+ messages in thread From: Gary Bisson @ 2015-09-09 12:30 UTC (permalink / raw) To: devicetree-u79uwXL29TY76Z2rM5mHXA Cc: shawn.guo-QSEj5FYQhm4dnm+yROfE0A, kernel-bIcnvbaLZ9MEGnE8C9+IrQ, robh+dt-DgEjT+Ai2ygdnm+yROfE0A, fabio.estevam-KZfg59tc24xl57MIdRCFDg, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, linux-lFZ/pmaqli7XmaaqVzeoHQ, p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ, Gary Bisson Signed-off-by: Gary Bisson <gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org> --- arch/arm/boot/dts/imx6dl-nitrogen6x.dts | 40 +++++++++++++++++++++++++++---- arch/arm/boot/dts/imx6q-nitrogen6x.dts | 40 +++++++++++++++++++++++++++---- arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi | 40 +++++++++++++++++++++++++++---- 3 files changed, 105 insertions(+), 15 deletions(-) diff --git a/arch/arm/boot/dts/imx6dl-nitrogen6x.dts b/arch/arm/boot/dts/imx6dl-nitrogen6x.dts index 5f4d33c..54bc4cd 100644 --- a/arch/arm/boot/dts/imx6dl-nitrogen6x.dts +++ b/arch/arm/boot/dts/imx6dl-nitrogen6x.dts @@ -3,12 +3,42 @@ * Copyright 2012 Freescale Semiconductor, Inc. * Copyright 2011 Linaro Ltd. * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx6q-nitrogen6x.dts b/arch/arm/boot/dts/imx6q-nitrogen6x.dts index a57866b..8088cfc 100644 --- a/arch/arm/boot/dts/imx6q-nitrogen6x.dts +++ b/arch/arm/boot/dts/imx6q-nitrogen6x.dts @@ -3,12 +3,42 @@ * Copyright 2012 Freescale Semiconductor, Inc. * Copyright 2011 Linaro Ltd. * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi index 2ce7cb4..d156d9a 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi @@ -3,12 +3,42 @@ * Copyright 2011 Freescale Semiconductor, Inc. * Copyright 2011 Linaro Ltd. * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> -- 2.5.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply related [flat|nested] 46+ messages in thread
* [PATCH v3 4/9] ARM: dts: imx6qdl-sabrelite: relicense under GPLv2/X11 [not found] ` <1441801853-10264-1-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org> ` (2 preceding siblings ...) 2015-09-09 12:30 ` [PATCH v3 3/9] ARM: dts: imx6qdl-nitrogen6x: relicense under GPLv2/X11 Gary Bisson @ 2015-09-09 12:30 ` Gary Bisson 2015-09-09 12:30 ` [PATCH v3 5/9] of: Add Boundary Devices Inc. vendor prefix Gary Bisson ` (5 subsequent siblings) 9 siblings, 0 replies; 46+ messages in thread From: Gary Bisson @ 2015-09-09 12:30 UTC (permalink / raw) To: devicetree-u79uwXL29TY76Z2rM5mHXA Cc: shawn.guo-QSEj5FYQhm4dnm+yROfE0A, kernel-bIcnvbaLZ9MEGnE8C9+IrQ, robh+dt-DgEjT+Ai2ygdnm+yROfE0A, fabio.estevam-KZfg59tc24xl57MIdRCFDg, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, linux-lFZ/pmaqli7XmaaqVzeoHQ, p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ, Gary Bisson Signed-off-by: Gary Bisson <gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org> --- arch/arm/boot/dts/imx6dl-sabrelite.dts | 40 ++++++++++++++++++++++++++++---- arch/arm/boot/dts/imx6q-sabrelite.dts | 40 ++++++++++++++++++++++++++++---- arch/arm/boot/dts/imx6qdl-sabrelite.dtsi | 40 ++++++++++++++++++++++++++++---- 3 files changed, 105 insertions(+), 15 deletions(-) diff --git a/arch/arm/boot/dts/imx6dl-sabrelite.dts b/arch/arm/boot/dts/imx6dl-sabrelite.dts index 2de0447..0f06ca5 100644 --- a/arch/arm/boot/dts/imx6dl-sabrelite.dts +++ b/arch/arm/boot/dts/imx6dl-sabrelite.dts @@ -2,12 +2,42 @@ * Copyright 2011 Freescale Semiconductor, Inc. * Copyright 2011 Linaro Ltd. * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts index 96e4688..66d10d8 100644 --- a/arch/arm/boot/dts/imx6q-sabrelite.dts +++ b/arch/arm/boot/dts/imx6q-sabrelite.dts @@ -2,12 +2,42 @@ * Copyright 2011 Freescale Semiconductor, Inc. * Copyright 2011 Linaro Ltd. * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi index ce4c731..8703b9d 100644 --- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi @@ -2,12 +2,42 @@ * Copyright 2011 Freescale Semiconductor, Inc. * Copyright 2011 Linaro Ltd. * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> -- 2.5.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply related [flat|nested] 46+ messages in thread
* [PATCH v3 5/9] of: Add Boundary Devices Inc. vendor prefix [not found] ` <1441801853-10264-1-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org> ` (3 preceding siblings ...) 2015-09-09 12:30 ` [PATCH v3 4/9] ARM: dts: imx6qdl-sabrelite: " Gary Bisson @ 2015-09-09 12:30 ` Gary Bisson 2015-09-09 12:30 ` [PATCH v3 6/9] ARM: dts: imx6q-nitrogen6x: change manufacturer to Boundary Devices Gary Bisson ` (4 subsequent siblings) 9 siblings, 0 replies; 46+ messages in thread From: Gary Bisson @ 2015-09-09 12:30 UTC (permalink / raw) To: devicetree-u79uwXL29TY76Z2rM5mHXA Cc: shawn.guo-QSEj5FYQhm4dnm+yROfE0A, kernel-bIcnvbaLZ9MEGnE8C9+IrQ, robh+dt-DgEjT+Ai2ygdnm+yROfE0A, fabio.estevam-KZfg59tc24xl57MIdRCFDg, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, linux-lFZ/pmaqli7XmaaqVzeoHQ, p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ, Gary Bisson This patch adds the vendor prefix for Boundary Devices Inc. which is a supplier of ARM-based single board computers and System-on-Modules for the general embedded market. Website: http://boundarydevices.com/ Signed-off-by: Gary Bisson <gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org> --- Documentation/devicetree/bindings/vendor-prefixes.txt | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index ac5f0c3..4c67e2a 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -34,6 +34,7 @@ avago Avago Technologies avic Shanghai AVIC Optoelectronics Co., Ltd. axis Axis Communications AB bosch Bosch Sensortec GmbH +boundary Boundary Devices Inc. brcm Broadcom Corporation buffalo Buffalo, Inc. calxeda Calxeda -- 2.5.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply related [flat|nested] 46+ messages in thread
* [PATCH v3 6/9] ARM: dts: imx6q-nitrogen6x: change manufacturer to Boundary Devices [not found] ` <1441801853-10264-1-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org> ` (4 preceding siblings ...) 2015-09-09 12:30 ` [PATCH v3 5/9] of: Add Boundary Devices Inc. vendor prefix Gary Bisson @ 2015-09-09 12:30 ` Gary Bisson 2015-09-09 12:30 ` [PATCH v3 7/9] ARM: dts: imx6dl-nitrogen6x: " Gary Bisson ` (3 subsequent siblings) 9 siblings, 0 replies; 46+ messages in thread From: Gary Bisson @ 2015-09-09 12:30 UTC (permalink / raw) To: devicetree-u79uwXL29TY76Z2rM5mHXA Cc: shawn.guo-QSEj5FYQhm4dnm+yROfE0A, kernel-bIcnvbaLZ9MEGnE8C9+IrQ, robh+dt-DgEjT+Ai2ygdnm+yROfE0A, fabio.estevam-KZfg59tc24xl57MIdRCFDg, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, linux-lFZ/pmaqli7XmaaqVzeoHQ, p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ, Gary Bisson Signed-off-by: Gary Bisson <gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org> --- arch/arm/boot/dts/imx6q-nitrogen6x.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/imx6q-nitrogen6x.dts b/arch/arm/boot/dts/imx6q-nitrogen6x.dts index 8088cfc..d168633 100644 --- a/arch/arm/boot/dts/imx6q-nitrogen6x.dts +++ b/arch/arm/boot/dts/imx6q-nitrogen6x.dts @@ -46,8 +46,8 @@ #include "imx6qdl-nitrogen6x.dtsi" / { - model = "Freescale i.MX6 Quad Nitrogen6x Board"; - compatible = "fsl,imx6q-nitrogen6x", "fsl,imx6q"; + model = "Boundary Devices i.MX6 Quad Nitrogen6x Board"; + compatible = "boundary,imx6q-nitrogen6x", "fsl,imx6q"; }; &sata { -- 2.5.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply related [flat|nested] 46+ messages in thread
* [PATCH v3 7/9] ARM: dts: imx6dl-nitrogen6x: change manufacturer to Boundary Devices [not found] ` <1441801853-10264-1-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org> ` (5 preceding siblings ...) 2015-09-09 12:30 ` [PATCH v3 6/9] ARM: dts: imx6q-nitrogen6x: change manufacturer to Boundary Devices Gary Bisson @ 2015-09-09 12:30 ` Gary Bisson 2015-09-09 12:30 ` [PATCH v3 8/9] ARM: dts: imx: add Boundary Devices Nitrogen6_Max board Gary Bisson ` (2 subsequent siblings) 9 siblings, 0 replies; 46+ messages in thread From: Gary Bisson @ 2015-09-09 12:30 UTC (permalink / raw) To: devicetree-u79uwXL29TY76Z2rM5mHXA Cc: shawn.guo-QSEj5FYQhm4dnm+yROfE0A, kernel-bIcnvbaLZ9MEGnE8C9+IrQ, robh+dt-DgEjT+Ai2ygdnm+yROfE0A, fabio.estevam-KZfg59tc24xl57MIdRCFDg, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, linux-lFZ/pmaqli7XmaaqVzeoHQ, p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ, Gary Bisson Signed-off-by: Gary Bisson <gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org> --- arch/arm/boot/dts/imx6dl-nitrogen6x.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/imx6dl-nitrogen6x.dts b/arch/arm/boot/dts/imx6dl-nitrogen6x.dts index 54bc4cd..8398f97 100644 --- a/arch/arm/boot/dts/imx6dl-nitrogen6x.dts +++ b/arch/arm/boot/dts/imx6dl-nitrogen6x.dts @@ -46,6 +46,6 @@ #include "imx6qdl-nitrogen6x.dtsi" / { - model = "Freescale i.MX6 DualLite Nitrogen6x Board"; - compatible = "fsl,imx6dl-nitrogen6x", "fsl,imx6dl"; + model = "Boundary Devices i.MX6 DualLite Nitrogen6x Board"; + compatible = "boundary,imx6dl-nitrogen6x", "fsl,imx6dl"; }; -- 2.5.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply related [flat|nested] 46+ messages in thread
* [PATCH v3 8/9] ARM: dts: imx: add Boundary Devices Nitrogen6_Max board [not found] ` <1441801853-10264-1-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org> ` (6 preceding siblings ...) 2015-09-09 12:30 ` [PATCH v3 7/9] ARM: dts: imx6dl-nitrogen6x: " Gary Bisson @ 2015-09-09 12:30 ` Gary Bisson 2015-09-09 12:30 ` [PATCH v3 9/9] ARM: dts: imx: add Boundary Devices Nitrogen6_Lite board Gary Bisson 2015-09-30 6:03 ` [PATCH v3 0/9] ARM: dts: update Boundary Devices boards support Shawn Guo 9 siblings, 0 replies; 46+ messages in thread From: Gary Bisson @ 2015-09-09 12:30 UTC (permalink / raw) To: devicetree-u79uwXL29TY76Z2rM5mHXA Cc: shawn.guo-QSEj5FYQhm4dnm+yROfE0A, kernel-bIcnvbaLZ9MEGnE8C9+IrQ, robh+dt-DgEjT+Ai2ygdnm+yROfE0A, fabio.estevam-KZfg59tc24xl57MIdRCFDg, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, linux-lFZ/pmaqli7XmaaqVzeoHQ, p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ, Gary Bisson Based on i.MX6 Quad with 4GB of DDR3. http://boundarydevices.com/product/nitrogen6max/ Signed-off-by: Gary Bisson <gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org> --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/imx6q-nitrogen6_max.dts | 53 ++ arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi | 873 +++++++++++++++++++++++++++ 3 files changed, 927 insertions(+) create mode 100644 arch/arm/boot/dts/imx6q-nitrogen6_max.dts create mode 100644 arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 233159d..cc29515 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -313,6 +313,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6q-gw552x.dtb \ imx6q-hummingboard.dtb \ imx6q-nitrogen6x.dtb \ + imx6q-nitrogen6_max.dtb \ imx6q-phytec-pbab01.dtb \ imx6q-rex-pro.dtb \ imx6q-sabreauto.dtb \ diff --git a/arch/arm/boot/dts/imx6q-nitrogen6_max.dts b/arch/arm/boot/dts/imx6q-nitrogen6_max.dts new file mode 100644 index 0000000..d417457 --- /dev/null +++ b/arch/arm/boot/dts/imx6q-nitrogen6_max.dts @@ -0,0 +1,53 @@ +/* + * Copyright 2015 Boundary Devices, Inc. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ +/dts-v1/; + +#include "imx6q.dtsi" +#include "imx6qdl-nitrogen6_max.dtsi" + +/ { + model = "Boundary Devices i.MX6 Quad Nitrogen6_MAX Board"; + compatible = "boundary,imx6q-nitrogen6_max", "fsl,imx6q"; +}; + +&sata { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi new file mode 100644 index 0000000..a35d54f --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi @@ -0,0 +1,873 @@ +/* + * Copyright 2015 Boundary Devices, Inc. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + chosen { + stdout-path = &uart2; + }; + + memory { + reg = <0x10000000 0xF0000000>; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_1p8v: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "1P8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + reg_2p5v: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "2P5V"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; + + reg_3p3v: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_usb_otg_vbus: regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usb_h1_vbus: regulator@4 { + compatible = "regulator-fixed"; + reg = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh1>; + regulator-name = "usb_h1_vbus"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_wlan_vmmc: regulator@5 { + compatible = "regulator-fixed"; + reg = <5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wlan_vmmc>; + regulator-name = "reg_wlan_vmmc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio6 15 GPIO_ACTIVE_HIGH>; + startup-delay-us = <70000>; + enable-active-high; + }; + + reg_can_xcvr: regulator@6 { + compatible = "regulator-fixed"; + reg = <6>; + regulator-name = "CAN XCVR"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can_xcvr>; + gpio = <&gpio1 2 GPIO_ACTIVE_LOW>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_keys>; + + power { + label = "Power Button"; + gpios = <&gpio2 3 GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + gpio-key,wakeup; + }; + + menu { + label = "Menu"; + gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; + linux,code = <KEY_MENU>; + }; + + home { + label = "Home"; + gpios = <&gpio2 4 GPIO_ACTIVE_LOW>; + linux,code = <KEY_HOME>; + }; + + back { + label = "Back"; + gpios = <&gpio2 2 GPIO_ACTIVE_LOW>; + linux,code = <KEY_BACK>; + }; + + volume-up { + label = "Volume Up"; + gpios = <&gpio7 13 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + }; + + volume-down { + label = "Volume Down"; + gpios = <&gpio7 1 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEDOWN>; + }; + }; + + i2cmux@2 { + compatible = "i2c-mux-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2mux>; + #address-cells = <1>; + #size-cells = <0>; + mux-gpios = <&gpio3 20 GPIO_ACTIVE_HIGH + &gpio4 15 GPIO_ACTIVE_HIGH>; + i2c-parent = <&i2c2>; + idle-state = <0>; + + i2c2@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c2@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + i2cmux@3 { + compatible = "i2c-mux-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3mux>; + #address-cells = <1>; + #size-cells = <0>; + mux-gpios = <&gpio2 25 GPIO_ACTIVE_HIGH>; + i2c-parent = <&i2c3>; + idle-state = <0>; + + i2c3@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + leds { + compatible = "gpio-leds"; + + speaker-enable { + gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>; + retain-state-suspended; + default-state = "off"; + }; + + ttymxc4-rs232 { + gpios = <&gpio6 10 GPIO_ACTIVE_HIGH>; + retain-state-suspended; + default-state = "on"; + }; + }; + + backlight_lcd: backlight_lcd { + compatible = "pwm-backlight"; + pwms = <&pwm1 0 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <7>; + power-supply = <®_3p3v>; + status = "okay"; + }; + + backlight_lvds0: backlight_lvds0 { + compatible = "pwm-backlight"; + pwms = <&pwm4 0 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <7>; + power-supply = <®_3p3v>; + status = "okay"; + }; + + backlight_lvds1: backlight_lvds1 { + compatible = "pwm-backlight"; + pwms = <&pwm2 0 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <7>; + power-supply = <®_3p3v>; + status = "okay"; + }; + + lcd_display: display@di0 { + compatible = "fsl,imx-parallel-display"; + #address-cells = <1>; + #size-cells = <0>; + interface-pix-fmt = "bgr666"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_j15>; + status = "okay"; + + port@0 { + reg = <0>; + + lcd_display_in: endpoint { + remote-endpoint = <&ipu1_di0_disp0>; + }; + }; + + port@1 { + reg = <1>; + + lcd_display_out: endpoint { + remote-endpoint = <&lcd_panel_in>; + }; + }; + }; + + panel_lcd { + compatible = "okaya,rs800480t-7x0gp"; + backlight = <&backlight_lcd>; + + port { + lcd_panel_in: endpoint { + remote-endpoint = <&lcd_display_out>; + }; + }; + }; + + panel_lvds0 { + compatible = "hannstar,hsd100pxn1"; + backlight = <&backlight_lvds0>; + + port { + panel_in_lvds0: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + }; + + panel_lvds1 { + compatible = "hannstar,hsd100pxn1"; + backlight = <&backlight_lvds1>; + + port { + panel_in_lvds1: endpoint { + remote-endpoint = <&lvds1_out>; + }; + }; + }; + + sound { + compatible = "fsl,imx6q-nitrogen6_max-sgtl5000", + "fsl,imx-audio-sgtl5000"; + model = "imx6q-nitrogen6_max-sgtl5000"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sgtl5000>; + ssi-controller = <&ssi1>; + audio-codec = <&codec>; + audio-routing = + "MIC_IN", "Mic Jack", + "Mic Jack", "Mic Bias", + "Headphone Jack", "HP_OUT"; + mux-int-port = <1>; + mux-ext-port = <3>; + }; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux>; + status = "okay"; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can1>; + xceiver-supply = <®_can_xcvr>; + status = "okay"; +}; + +&clks { + assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, + <&clks IMX6QDL_CLK_LDB_DI1_SEL>; + assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>, + <&clks IMX6QDL_CLK_PLL3_USB_OTG>; +}; + +&ecspi1 { + fsl,spi-num-chipselects = <1>; + cs-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + status = "okay"; + + flash: m25p80@0 { + compatible = "microchip,sst25vf016b"; + spi-max-frequency = <20000000>; + reg = <0>; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rgmii"; + phy-reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>; + txen-skew-ps = <0>; + txc-skew-ps = <3000>; + rxdv-skew-ps = <0>; + rxc-skew-ps = <3000>; + rxd0-skew-ps = <0>; + rxd1-skew-ps = <0>; + rxd2-skew-ps = <0>; + rxd3-skew-ps = <0>; + txd0-skew-ps = <0>; + txd1-skew-ps = <0>; + txd2-skew-ps = <0>; + txd3-skew-ps = <0>; + interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>, + <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>; + status = "okay"; +}; + +&hdmi { + ddc-i2c-bus = <&i2c2>; + status = "okay"; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + codec: sgtl5000@0a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + clocks = <&clks 201>; + VDDA-supply = <®_2p5v>; + VDDIO-supply = <®_3p3v>; + }; + + rtc: rtc@68 { + compatible = "st,rv4162"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rv4162>; + reg = <0x68>; + interrupts-extended = <&gpio4 6 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + touchscreen@04 { + compatible = "eeti,egalax_ts"; + reg = <0x04>; + interrupt-parent = <&gpio1>; + interrupts = <9 IRQ_TYPE_EDGE_FALLING>; + wakeup-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; + }; + + touchscreen@38 { + compatible = "edt,edt-ft5x06"; + reg = <0x38>; + interrupt-parent = <&gpio1>; + interrupts = <9 IRQ_TYPE_EDGE_FALLING>; + }; +}; + +&iomuxc { + imx6q-nitrogen6_max { + pinctrl_audmux: audmuxgrp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0 + MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0 + MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0 + MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0 + >; + }; + + pinctrl_can1: can1grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b0 + MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b0 + >; + }; + + pinctrl_can_xcvr: can-xcvrgrp { + fsl,pins = < + /* Flexcan XCVR enable */ + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0 + >; + }; + + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 + MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 + MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 + MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x000b1 + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x100b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x100b0 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x100b0 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x100b0 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x100b0 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x100b0 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x100b0 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x100b0 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x100b0 + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 + /* Phy reset */ + MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x0f0b0 + MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0 + MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1 + >; + }; + + pinctrl_gpio_keys: gpio_keysgrp { + fsl,pins = < + /* Power Button */ + MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0 + /* Menu Button */ + MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0 + /* Home Button */ + MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x1b0b0 + /* Back Button */ + MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0 + /* Volume Up Button */ + MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x1b0b0 + /* Volume Down Button */ + MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x1b0b0 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c2mux: i2c2muxgrp { + fsl,pins = < + /* ov5642 camera i2c enable */ + MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x000b0 + /* ov5640_mipi camera i2c enable */ + MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x000b0 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_16__I2C3_SDA 0x4001b8b1 + MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0 + >; + }; + + pinctrl_i2c3mux: i2c3muxgrp { + fsl,pins = < + /* PCIe I2C enable */ + MX6QDL_PAD_EIM_OE__GPIO2_IO25 0x000b0 + >; + }; + + pinctrl_j15: j15grp { + fsl,pins = < + MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10 + MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x10 + MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x10 + MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x10 + MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x10 + MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x10 + MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x10 + MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x10 + MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x10 + MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x10 + MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x10 + MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x10 + MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x10 + MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x10 + MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x10 + MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x10 + MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x10 + MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x10 + MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x10 + MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x10 + MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x10 + MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x10 + MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x10 + MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x10 + MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x10 + MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x10 + MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x10 + MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x10 + >; + }; + + pinctrl_pcie: pciegrp { + fsl,pins = < + /* PCIe reset */ + MX6QDL_PAD_EIM_BCLK__GPIO6_IO31 0x000b0 + >; + }; + + pinctrl_pwm1: pwm1grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1 + >; + }; + + pinctrl_pwm2: pwm2grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1 + >; + }; + + pinctrl_pwm3: pwm3grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1 + >; + }; + + pinctrl_pwm4: pwm4grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1 + >; + }; + + pinctrl_rv4162: rv4162grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0 + >; + }; + + pinctrl_sgtl5000: sgtl5000grp { + fsl,pins = < + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x000b0 + MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x1b0b0 + MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart5: uart5grp { + fsl,pins = < + MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x130b1 + MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x030b1 + /* RS485 RX Enable: pull up */ + MX6QDL_PAD_NANDF_RB0__GPIO6_IO10 0x1b0b1 + /* RS485 DEN: pull down */ + MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x030b1 + /* RS485/!RS232 Select: pull down (rs232) */ + MX6QDL_PAD_EIM_CS1__GPIO2_IO24 0x030b1 + /* ON: pull down */ + MX6QDL_PAD_NANDF_ALE__GPIO6_IO08 0x030b1 + >; + }; + + pinctrl_usbh1: usbh1grp { + fsl,pins = < + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x0b0b0 + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 + MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x1b0b0 + /* power enable, high active */ + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x000b0 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x100b0 + MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0 + >; + }; + + pinctrl_usdhc4: usdhc4grp { + fsl,pins = < + MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059 + MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059 + MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059 + MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059 + MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059 + MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059 + MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059 + MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059 + MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059 + MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059 + >; + }; + + pinctrl_wlan_vmmc: wlan_vmmcgrp { + fsl,pins = < + MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x100b0 + MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x000b0 + MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x000b0 + MX6QDL_PAD_SD1_CLK__OSC32K_32K_OUT 0x000b0 + >; + }; + }; +}; + +&ipu1_di0_disp0 { + remote-endpoint = <&lcd_display_in>; +}; + +&ldb { + status = "okay"; + + lvds-channel@0 { + fsl,data-mapping = "spwg"; + fsl,data-width = <18>; + status = "okay"; + + port@4 { + reg = <4>; + + lvds0_out: endpoint { + remote-endpoint = <&panel_in_lvds0>; + }; + }; + }; + + lvds-channel@1 { + fsl,data-mapping = "spwg"; + fsl,data-width = <18>; + status = "okay"; + + port@4 { + reg = <4>; + + lvds1_out: endpoint { + remote-endpoint = <&panel_in_lvds1>; + }; + }; + }; +}; + +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie>; + reset-gpio = <&gpio6 31 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "okay"; +}; + +&pwm2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm2>; + status = "okay"; +}; + +&pwm3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm3>; + status = "okay"; +}; + +&pwm4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm4>; + status = "okay"; +}; + +&ssi1 { + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + status = "okay"; +}; + +&usbh1 { + vbus-supply = <®_usb_h1_vbus>; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_usb_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + disable-over-current; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + bus-width = <4>; + non-removable; + vmmc-supply = <®_wlan_vmmc>; + cap-power-off-card; + keep-power-in-suspend; + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + wlcore: wlcore@2 { + compatible = "ti,wl1271"; + reg = <2>; + interrupt-parent = <&gpio6>; + interrupts = <11 IRQ_TYPE_LEVEL_HIGH>; + ref-clock-frequency = <38400000>; + }; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; + bus-width = <4>; + vmmc-supply = <®_3p3v>; + status = "okay"; +}; + +&usdhc4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc4>; + bus-width = <8>; + non-removable; + vmmc-supply = <®_1p8v>; + keep-power-in-suspend; + status = "okay"; +}; -- 2.5.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply related [flat|nested] 46+ messages in thread
* [PATCH v3 9/9] ARM: dts: imx: add Boundary Devices Nitrogen6_Lite board [not found] ` <1441801853-10264-1-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org> ` (7 preceding siblings ...) 2015-09-09 12:30 ` [PATCH v3 8/9] ARM: dts: imx: add Boundary Devices Nitrogen6_Max board Gary Bisson @ 2015-09-09 12:30 ` Gary Bisson 2015-09-30 6:03 ` [PATCH v3 0/9] ARM: dts: update Boundary Devices boards support Shawn Guo 9 siblings, 0 replies; 46+ messages in thread From: Gary Bisson @ 2015-09-09 12:30 UTC (permalink / raw) To: devicetree-u79uwXL29TY76Z2rM5mHXA Cc: shawn.guo-QSEj5FYQhm4dnm+yROfE0A, kernel-bIcnvbaLZ9MEGnE8C9+IrQ, robh+dt-DgEjT+Ai2ygdnm+yROfE0A, fabio.estevam-KZfg59tc24xl57MIdRCFDg, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, linux-lFZ/pmaqli7XmaaqVzeoHQ, p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ, Gary Bisson Based on an i.MX6 Solo with 512MB DDR3. http://boundarydevices.com/product/nitrogen6_lite/ Signed-off-by: Gary Bisson <gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org> --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/imx6dl-nit6xlite.dts | 49 +++ arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi | 630 +++++++++++++++++++++++++++++++ 3 files changed, 680 insertions(+) create mode 100644 arch/arm/boot/dts/imx6dl-nit6xlite.dts create mode 100644 arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index cc29515..b4afb42 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -284,6 +284,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6dl-gw551x.dtb \ imx6dl-gw552x.dtb \ imx6dl-hummingboard.dtb \ + imx6dl-nit6xlite.dtb \ imx6dl-nitrogen6x.dtb \ imx6dl-phytec-pbab01.dtb \ imx6dl-rex-basic.dtb \ diff --git a/arch/arm/boot/dts/imx6dl-nit6xlite.dts b/arch/arm/boot/dts/imx6dl-nit6xlite.dts new file mode 100644 index 0000000..e0161e4 --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-nit6xlite.dts @@ -0,0 +1,49 @@ +/* + * Copyright 2015 Boundary Devices, Inc. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ +/dts-v1/; + +#include "imx6dl.dtsi" +#include "imx6qdl-nit6xlite.dtsi" + +/ { + model = "Boundary Devices i.MX6 Solo Nitrogen6_Lite Board"; + compatible = "boundary,imx6dl-nit6xlite", "fsl,imx6dl"; +}; diff --git a/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi b/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi new file mode 100644 index 0000000..24d7d3f --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi @@ -0,0 +1,630 @@ +/* + * Copyright 2015 Boundary Devices, Inc. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + chosen { + stdout-path = &uart2; + }; + + memory { + reg = <0x10000000 0x20000000>; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_2p5v: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "2P5V"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; + + reg_3p3v: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_usb_otg_vbus: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_wlan_vmmc: regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wlan_vmmc>; + regulator-name = "reg_wlan_vmmc"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&gpio6 7 GPIO_ACTIVE_HIGH>; + startup-delay-us = <70000>; + enable-active-high; + }; + }; + + bt_rfkill { + compatible = "rfkill-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_bt_rfkill>; + gpios = <&gpio6 8 GPIO_ACTIVE_HIGH>; + name = "bt_rfkill"; + type = <2>; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_keys>; + + home { + label = "Home"; + gpios = <&gpio7 13 IRQ_TYPE_LEVEL_LOW>; + linux,code = <102>; + }; + + back { + label = "Back"; + gpios = <&gpio4 5 IRQ_TYPE_LEVEL_LOW>; + linux,code = <158>; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_leds>; + + j14-pin1 { + gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; + retain-state-suspended; + default-state = "off"; + }; + + j14-pin3 { + gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; + retain-state-suspended; + default-state = "off"; + }; + + j14-pins8-9 { + gpios = <&gpio3 29 GPIO_ACTIVE_LOW>; + retain-state-suspended; + default-state = "off"; + }; + + j46-pin2 { + gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; + retain-state-suspended; + default-state = "off"; + }; + + j46-pin3 { + gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; + retain-state-suspended; + default-state = "off"; + }; + }; + + backlight_lcd { + compatible = "pwm-backlight"; + pwms = <&pwm1 0 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <7>; + power-supply = <®_3p3v>; + status = "okay"; + }; + + backlight_lvds0: backlight_lvds0 { + compatible = "pwm-backlight"; + pwms = <&pwm4 0 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <7>; + power-supply = <®_3p3v>; + status = "okay"; + }; + + panel_lvds0 { + compatible = "hannstar,hsd100pxn1"; + backlight = <&backlight_lvds0>; + + port { + panel_in_lvds0: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + }; + + sound { + compatible = "fsl,imx6dl-nit6xlite-sgtl5000", + "fsl,imx-audio-sgtl5000"; + model = "imx6dl-nit6xlite-sgtl5000"; + ssi-controller = <&ssi1>; + audio-codec = <&codec>; + audio-routing = + "MIC_IN", "Mic Jack", + "Mic Jack", "Mic Bias", + "Headphone Jack", "HP_OUT"; + mux-int-port = <1>; + mux-ext-port = <3>; + }; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux>; + status = "okay"; +}; + +&clks { + assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, + <&clks IMX6QDL_CLK_LDB_DI1_SEL>; + assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>, + <&clks IMX6QDL_CLK_PLL3_USB_OTG>; +}; + +&ecspi1 { + fsl,spi-num-chipselects = <1>; + cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + status = "okay"; + + flash: m25p80@0 { + compatible = "microchip,sst25vf016b"; + spi-max-frequency = <20000000>; + reg = <0>; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rgmii"; + phy-reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>; + txen-skew-ps = <0>; + txc-skew-ps = <3000>; + rxdv-skew-ps = <0>; + rxc-skew-ps = <3000>; + rxd0-skew-ps = <0>; + rxd1-skew-ps = <0>; + rxd2-skew-ps = <0>; + rxd3-skew-ps = <0>; + txd0-skew-ps = <0>; + txd1-skew-ps = <0>; + txd2-skew-ps = <0>; + txd3-skew-ps = <0>; + interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>, + <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>; + status = "okay"; +}; + +&hdmi { + ddc-i2c-bus = <&i2c2>; + status = "okay"; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + codec: sgtl5000@0a { + compatible = "fsl,sgtl5000"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sgtl5000>; + reg = <0x0a>; + clocks = <&clks 201>; + VDDA-supply = <®_2p5v>; + VDDIO-supply = <®_3p3v>; + }; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + touchscreen@04 { + compatible = "eeti,egalax_ts"; + reg = <0x04>; + interrupt-parent = <&gpio1>; + interrupts = <9 IRQ_TYPE_EDGE_FALLING>; + wakeup-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; + }; + + touchscreen@38 { + compatible = "edt,edt-ft5x06"; + reg = <0x38>; + interrupt-parent = <&gpio1>; + interrupts = <9 IRQ_TYPE_EDGE_FALLING>; + }; + + rtc@6f { + compatible = "isil,isl1208"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rtc>; + reg = <0x6f>; + interrupts-extended = <&gpio2 26 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_j10>; + pinctrl-1 = <&pinctrl_j28>; + + imx6dl-nit6xlite { + pinctrl_audmux: audmuxgrp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0 + MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0 + MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0 + MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0 + >; + }; + + pinctrl_bt_rfkill: bt_rfkillgrp { + fsl,pins = < + /* BT wake */ + MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0 + /* BT reset */ + MX6QDL_PAD_NANDF_ALE__GPIO6_IO08 0x0b0b0 + /* BT reg en */ + MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x1b0b0 + /* BT host wake irq */ + MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x100b0 + >; + }; + + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 + MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 + MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 + MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x000b1 + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x100b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x100b0 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x100b0 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x100b0 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x100b0 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x100b0 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x100b0 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x100b0 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x100b0 + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 + /* Phy reset */ + MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x0f0b0 + MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0 + MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1 + >; + }; + + pinctrl_gpio_keys: gpio_keysgrp { + fsl,pins = < + /* Home Button: J14 pin 5 */ + MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x1b0b0 + /* Back Button: J14 pin 7 */ + MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x1b0b0 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_16__I2C3_SDA 0x4001b8b1 + /* Touch IRQ: J7 pin 4 */ + MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0 + /* tcs2004 IRQ */ + MX6QDL_PAD_EIM_LBA__GPIO2_IO27 0x1b0b0 + /* tsc2004 reset */ + MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x0b0b0 + >; + }; + + pinctrl_j10: j10grp { + fsl,pins = < + /* Broadcom WiFi module pins */ + MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x1b0b0 + MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0 + MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0 + MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x1b0b0 + MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09 0x0b0b0 + MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x1b0b0 + MX6QDL_PAD_SD1_CLK__OSC32K_32K_OUT 0x000b0 + >; + }; + + pinctrl_j28: j28grp { + fsl,pins = < + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0 + >; + }; + + pinctrl_leds: ledsgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x0b0b0 + MX6QDL_PAD_GPIO_3__GPIO1_IO03 0x0b0b0 + MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x030b0 + MX6QDL_PAD_GPIO_7__GPIO1_IO07 0x0b0b0 + MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0b0b0 + >; + }; + + pinctrl_pwm1: pwm1grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1 + >; + }; + + pinctrl_pwm3: pwm3grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1 + >; + }; + + pinctrl_pwm4: pwm4grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1 + >; + }; + + pinctrl_wlan_vmmc: wlan_vmmcgrp { + fsl,pins = < + MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x030b0 + >; + }; + + pinctrl_rtc: rtcgrp { + fsl,pins = < + MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x1b0b0 + >; + }; + + pinctrl_sgtl5000: sgtl5000grp { + fsl,pins = < + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x000b0 + MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x1b0b0 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D23__UART3_CTS_B 0x1b0b1 + MX6QDL_PAD_EIM_D31__UART3_RTS_B 0x1b0b1 + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 + MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x1b0b0 + /* power enable, high active */ + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x000b0 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0 + >; + }; + }; +}; + +&ldb { + status = "okay"; + + lvds-channel@0 { + fsl,data-mapping = "spwg"; + fsl,data-width = <18>; + status = "okay"; + + port@4 { + reg = <4>; + + lvds0_out: endpoint { + remote-endpoint = <&panel_in_lvds0>; + }; + }; + }; +}; + +&pcie { + status = "okay"; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "okay"; +}; + +&pwm3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm3>; + status = "okay"; +}; + +&pwm4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm4>; + status = "okay"; +}; + +&ssi1 { + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + fsl,uart-has-rtscts; + status = "okay"; +}; + +&usbh1 { + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_usb_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + disable-over-current; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + bus-width = <4>; + non-removable; + vmmc-supply = <®_3p3v>; + vqmmc-supply = <®_wlan_vmmc>; + vqmmc-1-8-v; + ocr-limit = <0x180>; /* 1.65v - 2.1v */ + cap-power-off-card; + keep-power-in-suspend; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; + vmmc-supply = <®_3p3v>; + status = "okay"; +}; -- 2.5.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply related [flat|nested] 46+ messages in thread
* Re: [PATCH v3 0/9] ARM: dts: update Boundary Devices boards support [not found] ` <1441801853-10264-1-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org> ` (8 preceding siblings ...) 2015-09-09 12:30 ` [PATCH v3 9/9] ARM: dts: imx: add Boundary Devices Nitrogen6_Lite board Gary Bisson @ 2015-09-30 6:03 ` Shawn Guo 9 siblings, 0 replies; 46+ messages in thread From: Shawn Guo @ 2015-09-30 6:03 UTC (permalink / raw) To: Gary Bisson Cc: devicetree-u79uwXL29TY76Z2rM5mHXA, fabio.estevam-KZfg59tc24xl57MIdRCFDg, linux-lFZ/pmaqli7XmaaqVzeoHQ, p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ, robh+dt-DgEjT+Ai2ygdnm+yROfE0A, kernel-bIcnvbaLZ9MEGnE8C9+IrQ, shawn.guo-QSEj5FYQhm4dnm+yROfE0A, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r On Wed, Sep 09, 2015 at 02:30:44PM +0200, Gary Bisson wrote: > Hi all, > > This series is a follow-up to the previous series that added LCD display > support. > http://lists.infradead.org/pipermail/linux-arm-kernel/2015-August/364425.html The MAINTAINERS file has been updated for a couple of release cycles with my new email address. Please stop sending patches to shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org, and resend any patches you want me to collect to shawnguo-DgEjT+Ai2yi4UlQgPVntAg@public.gmane.org Shawn > > This one aims at adding touchscreen and WiFi support for Nitrogen6x as well as > adding two boards: Nitrogen6_Max and Nit6xlite. > > It also takes care of updating the licenses to be GPLv2/X11. > > The series has been tested against linux-next tag next-20150909. > > Note that imx_v6_v7_defconfig has been used with the following additions: > CONFIG_TOUCHSCREEN_EDT_FT5X06=y > CONFIG_I2C_MUX_GPIO=y > CONFIG_RTC_DRV_M41T80=y > > Modifications: > v2->v3: > - Rename nodes to general class of device as suggested by Philipp and Russell. > - Remove useless wakeup-gpio field for edt,ft5x06 touchscreen > - Add missing muxing for interrupt GPIO > - Rebased on next-20150909 > v1->v2: > - Add Boundary Devices Inc. to vendor prefixes > - Relicense devices trees to GPLv2/X11 as suggested by Fabio for: > - Nitrogen6x > - SabreLite > - Nit6xLite > - Nitrogen6_MAX > - Change manufacturer to Boundary Devices as suggested by Fabio for: > - Nitrogen6x > - Nit6xLite > - Nitrogen6_MAX > - Fixed missing macros for gpio/irq values as suggested by Philipp. > - Rebased on next-20150908 > > Regards, > Gary > > Gary Bisson (9): > ARM: dts: imx6dql-nitrogen6x: add touchscreen support > ARM: dts: imx6qdl-nitrogen6x: add wifi wl1271 support > ARM: dts: imx6qdl-nitrogen6x: relicense under GPLv2/X11 > ARM: dts: imx6qdl-sabrelite: relicense under GPLv2/X11 > of: Add Boundary Devices Inc. vendor prefix > ARM: dts: imx6q-nitrogen6x: change manufacturer to Boundary Devices > ARM: dts: imx6dl-nitrogen6x: change manufacturer to Boundary Devices > ARM: dts: imx: add Boundary Devices Nitrogen6_Max board > ARM: dts: imx: add Boundary Devices Nitrogen6_Lite board > > .../devicetree/bindings/vendor-prefixes.txt | 1 + > arch/arm/boot/dts/Makefile | 2 + > arch/arm/boot/dts/imx6dl-nit6xlite.dts | 49 ++ > arch/arm/boot/dts/imx6dl-nitrogen6x.dts | 44 +- > arch/arm/boot/dts/imx6dl-sabrelite.dts | 40 +- > arch/arm/boot/dts/imx6q-nitrogen6_max.dts | 53 ++ > arch/arm/boot/dts/imx6q-nitrogen6x.dts | 44 +- > arch/arm/boot/dts/imx6q-sabrelite.dts | 40 +- > ...6qdl-nitrogen6x.dtsi => imx6qdl-nit6xlite.dtsi} | 396 ++++++---- > arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi | 873 +++++++++++++++++++++ > arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi | 111 ++- > arch/arm/boot/dts/imx6qdl-sabrelite.dtsi | 40 +- > 12 files changed, 1523 insertions(+), 170 deletions(-) > create mode 100644 arch/arm/boot/dts/imx6dl-nit6xlite.dts > create mode 100644 arch/arm/boot/dts/imx6q-nitrogen6_max.dts > copy arch/arm/boot/dts/{imx6qdl-nitrogen6x.dtsi => imx6qdl-nit6xlite.dtsi} (50%) > create mode 100644 arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi > > -- > 2.5.1 > > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 46+ messages in thread
* [RESEND][PATCH v3 0/9] ARM: dts: update Boundary Devices boards support [not found] ` <1441645069-27263-1-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org> ` (5 preceding siblings ...) 2015-09-09 12:30 ` [PATCH v3 0/9] ARM: dts: update Boundary Devices boards support Gary Bisson @ 2015-09-30 13:46 ` Gary Bisson 2015-09-30 13:46 ` [RESEND][PATCH v3 1/9] ARM: dts: imx6dql-nitrogen6x: add touchscreen support Gary Bisson ` (2 more replies) 6 siblings, 3 replies; 46+ messages in thread From: Gary Bisson @ 2015-09-30 13:46 UTC (permalink / raw) To: devicetree-u79uwXL29TY76Z2rM5mHXA Cc: shawnguo-DgEjT+Ai2ygdnm+yROfE0A, kernel-bIcnvbaLZ9MEGnE8C9+IrQ, robh+dt-DgEjT+Ai2ygdnm+yROfE0A, fabio.estevam-KZfg59tc24xl57MIdRCFDg, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, linux-lFZ/pmaqli7XmaaqVzeoHQ, p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ, Gary Bisson Hi all, This is just a resend of my v3 with Shawn's correct e-mail address. I've also made sure it applies (and builds) on latest linux-next 20150930. This series is a follow-up to the previous series that added LCD display support. http://lists.infradead.org/pipermail/linux-arm-kernel/2015-August/364425.html This one aims at adding touchscreen and WiFi support for Nitrogen6x as well as adding two boards: Nitrogen6_Max and Nit6xlite. It also takes care of updating the licenses to be GPLv2/X11. The series has been tested against linux-next tag next-20150909. Note that imx_v6_v7_defconfig has been used with the following additions: CONFIG_TOUCHSCREEN_EDT_FT5X06=y CONFIG_I2C_MUX_GPIO=y CONFIG_RTC_DRV_M41T80=y Modifications: v2->v3: - Rename nodes to general class of device as suggested by Philipp and Russell. - Remove useless wakeup-gpio field for edt,ft5x06 touchscreen - Add missing muxing for interrupt GPIO - Rebased on next-20150909 v1->v2: - Add Boundary Devices Inc. to vendor prefixes - Relicense devices trees to GPLv2/X11 as suggested by Fabio for: - Nitrogen6x - SabreLite - Nit6xLite - Nitrogen6_MAX - Change manufacturer to Boundary Devices as suggested by Fabio for: - Nitrogen6x - Nit6xLite - Nitrogen6_MAX - Fixed missing macros for gpio/irq values as suggested by Philipp. - Rebased on next-20150908 Regards, Gary Gary Bisson (9): ARM: dts: imx6dql-nitrogen6x: add touchscreen support ARM: dts: imx6qdl-nitrogen6x: add wifi wl1271 support ARM: dts: imx6qdl-nitrogen6x: relicense under GPLv2/X11 ARM: dts: imx6qdl-sabrelite: relicense under GPLv2/X11 of: Add Boundary Devices Inc. vendor prefix ARM: dts: imx6q-nitrogen6x: change manufacturer to Boundary Devices ARM: dts: imx6dl-nitrogen6x: change manufacturer to Boundary Devices ARM: dts: imx: add Boundary Devices Nitrogen6_Max board ARM: dts: imx: add Boundary Devices Nitrogen6_Lite board .../devicetree/bindings/vendor-prefixes.txt | 1 + arch/arm/boot/dts/Makefile | 2 + arch/arm/boot/dts/imx6dl-nit6xlite.dts | 49 ++ arch/arm/boot/dts/imx6dl-nitrogen6x.dts | 44 +- arch/arm/boot/dts/imx6dl-sabrelite.dts | 40 +- arch/arm/boot/dts/imx6q-nitrogen6_max.dts | 53 ++ arch/arm/boot/dts/imx6q-nitrogen6x.dts | 44 +- arch/arm/boot/dts/imx6q-sabrelite.dts | 40 +- ...6qdl-nitrogen6x.dtsi => imx6qdl-nit6xlite.dtsi} | 396 ++++++---- arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi | 873 +++++++++++++++++++++ arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi | 111 ++- arch/arm/boot/dts/imx6qdl-sabrelite.dtsi | 40 +- 12 files changed, 1523 insertions(+), 170 deletions(-) create mode 100644 arch/arm/boot/dts/imx6dl-nit6xlite.dts create mode 100644 arch/arm/boot/dts/imx6q-nitrogen6_max.dts copy arch/arm/boot/dts/{imx6qdl-nitrogen6x.dtsi => imx6qdl-nit6xlite.dtsi} (50%) create mode 100644 arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi -- 2.5.3 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 46+ messages in thread
* [RESEND][PATCH v3 1/9] ARM: dts: imx6dql-nitrogen6x: add touchscreen support 2015-09-30 13:46 ` [RESEND][PATCH " Gary Bisson @ 2015-09-30 13:46 ` Gary Bisson [not found] ` <1443620806-14792-1-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org> 2015-10-08 8:02 ` [RESEND][PATCH v3 0/9] ARM: dts: update Boundary Devices boards support Shawn Guo 2 siblings, 0 replies; 46+ messages in thread From: Gary Bisson @ 2015-09-30 13:46 UTC (permalink / raw) To: devicetree Cc: fabio.estevam, linux, p.zabel, Gary Bisson, robh+dt, kernel, shawnguo, linux-arm-kernel This patch adds the different touchscreens that can be connected using the displays available for this board. http://boundarydevices.com/product-category/displays/ Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com> --- arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi index 04278ba..dadc01a 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi @@ -247,6 +247,21 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c3>; status = "okay"; + + touchscreen@04 { + compatible = "eeti,egalax_ts"; + reg = <0x04>; + interrupt-parent = <&gpio1>; + interrupts = <9 IRQ_TYPE_EDGE_FALLING>; + wakeup-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; + }; + + touchscreen@38 { + compatible = "edt,edt-ft5x06"; + reg = <0x38>; + interrupt-parent = <&gpio1>; + interrupts = <9 IRQ_TYPE_EDGE_FALLING>; + }; }; &iomuxc { @@ -258,6 +273,7 @@ fsl,pins = < /* SGTL5000 sys_mclk */ MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x030b0 + MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0 >; }; -- 2.5.3 ^ permalink raw reply related [flat|nested] 46+ messages in thread
[parent not found: <1443620806-14792-1-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>]
* [RESEND][PATCH v3 2/9] ARM: dts: imx6qdl-nitrogen6x: add wifi wl1271 support [not found] ` <1443620806-14792-1-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org> @ 2015-09-30 13:46 ` Gary Bisson 2015-09-30 13:46 ` [RESEND][PATCH v3 3/9] ARM: dts: imx6qdl-nitrogen6x: relicense under GPLv2/X11 Gary Bisson ` (6 subsequent siblings) 7 siblings, 0 replies; 46+ messages in thread From: Gary Bisson @ 2015-09-30 13:46 UTC (permalink / raw) To: devicetree-u79uwXL29TY76Z2rM5mHXA Cc: shawnguo-DgEjT+Ai2ygdnm+yROfE0A, kernel-bIcnvbaLZ9MEGnE8C9+IrQ, robh+dt-DgEjT+Ai2ygdnm+yROfE0A, fabio.estevam-KZfg59tc24xl57MIdRCFDg, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, linux-lFZ/pmaqli7XmaaqVzeoHQ, p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ, Gary Bisson Signed-off-by: Gary Bisson <gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org> --- arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi | 55 +++++++++++++++++++++++++++++++ 1 file changed, 55 insertions(+) diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi index dadc01a..24e2d3c 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi @@ -65,6 +65,19 @@ pinctrl-0 = <&pinctrl_can_xcvr>; gpio = <&gpio1 2 GPIO_ACTIVE_LOW>; }; + + reg_wlan_vmmc: regulator@4 { + compatible = "regulator-fixed"; + reg = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wlan_vmmc>; + regulator-name = "reg_wlan_vmmc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio6 15 GPIO_ACTIVE_HIGH>; + startup-delay-us = <70000>; + enable-active-high; + }; }; gpio-keys { @@ -411,6 +424,18 @@ >; }; + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17071 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10071 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17071 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17071 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17071 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17071 + MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x000b0 + >; + }; + pinctrl_usdhc3: usdhc3grp { fsl,pins = < MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 @@ -434,6 +459,15 @@ MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x1b0b0 /* CD */ >; }; + + pinctrl_wlan_vmmc: wlan_vmmcgrp { + fsl,pins = < + MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x100b0 + MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x000b0 + MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x000b0 + MX6QDL_PAD_SD1_CLK__OSC32K_32K_OUT 0x000b0 + >; + }; }; }; @@ -505,6 +539,27 @@ status = "okay"; }; +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + bus-width = <4>; + non-removable; + vmmc-supply = <®_wlan_vmmc>; + cap-power-off-card; + keep-power-in-suspend; + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + wlcore: wlcore@2 { + compatible = "ti,wl1271"; + reg = <2>; + interrupt-parent = <&gpio6>; + interrupts = <14 IRQ_TYPE_LEVEL_HIGH>; + ref-clock-frequency = <38400000>; + }; +}; + &usdhc3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc3>; -- 2.5.3 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply related [flat|nested] 46+ messages in thread
* [RESEND][PATCH v3 3/9] ARM: dts: imx6qdl-nitrogen6x: relicense under GPLv2/X11 [not found] ` <1443620806-14792-1-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org> 2015-09-30 13:46 ` [RESEND][PATCH v3 2/9] ARM: dts: imx6qdl-nitrogen6x: add wifi wl1271 support Gary Bisson @ 2015-09-30 13:46 ` Gary Bisson 2015-09-30 13:46 ` [RESEND][PATCH v3 4/9] ARM: dts: imx6qdl-sabrelite: " Gary Bisson ` (5 subsequent siblings) 7 siblings, 0 replies; 46+ messages in thread From: Gary Bisson @ 2015-09-30 13:46 UTC (permalink / raw) To: devicetree-u79uwXL29TY76Z2rM5mHXA Cc: shawnguo-DgEjT+Ai2ygdnm+yROfE0A, kernel-bIcnvbaLZ9MEGnE8C9+IrQ, robh+dt-DgEjT+Ai2ygdnm+yROfE0A, fabio.estevam-KZfg59tc24xl57MIdRCFDg, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, linux-lFZ/pmaqli7XmaaqVzeoHQ, p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ, Gary Bisson Signed-off-by: Gary Bisson <gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org> --- arch/arm/boot/dts/imx6dl-nitrogen6x.dts | 40 +++++++++++++++++++++++++++---- arch/arm/boot/dts/imx6q-nitrogen6x.dts | 40 +++++++++++++++++++++++++++---- arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi | 40 +++++++++++++++++++++++++++---- 3 files changed, 105 insertions(+), 15 deletions(-) diff --git a/arch/arm/boot/dts/imx6dl-nitrogen6x.dts b/arch/arm/boot/dts/imx6dl-nitrogen6x.dts index 5f4d33c..54bc4cd 100644 --- a/arch/arm/boot/dts/imx6dl-nitrogen6x.dts +++ b/arch/arm/boot/dts/imx6dl-nitrogen6x.dts @@ -3,12 +3,42 @@ * Copyright 2012 Freescale Semiconductor, Inc. * Copyright 2011 Linaro Ltd. * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx6q-nitrogen6x.dts b/arch/arm/boot/dts/imx6q-nitrogen6x.dts index a57866b..8088cfc 100644 --- a/arch/arm/boot/dts/imx6q-nitrogen6x.dts +++ b/arch/arm/boot/dts/imx6q-nitrogen6x.dts @@ -3,12 +3,42 @@ * Copyright 2012 Freescale Semiconductor, Inc. * Copyright 2011 Linaro Ltd. * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi index 24e2d3c..822d9f3 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi @@ -3,12 +3,42 @@ * Copyright 2011 Freescale Semiconductor, Inc. * Copyright 2011 Linaro Ltd. * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> -- 2.5.3 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply related [flat|nested] 46+ messages in thread
* [RESEND][PATCH v3 4/9] ARM: dts: imx6qdl-sabrelite: relicense under GPLv2/X11 [not found] ` <1443620806-14792-1-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org> 2015-09-30 13:46 ` [RESEND][PATCH v3 2/9] ARM: dts: imx6qdl-nitrogen6x: add wifi wl1271 support Gary Bisson 2015-09-30 13:46 ` [RESEND][PATCH v3 3/9] ARM: dts: imx6qdl-nitrogen6x: relicense under GPLv2/X11 Gary Bisson @ 2015-09-30 13:46 ` Gary Bisson 2015-09-30 13:46 ` [RESEND][PATCH v3 5/9] of: Add Boundary Devices Inc. vendor prefix Gary Bisson ` (4 subsequent siblings) 7 siblings, 0 replies; 46+ messages in thread From: Gary Bisson @ 2015-09-30 13:46 UTC (permalink / raw) To: devicetree-u79uwXL29TY76Z2rM5mHXA Cc: shawnguo-DgEjT+Ai2ygdnm+yROfE0A, kernel-bIcnvbaLZ9MEGnE8C9+IrQ, robh+dt-DgEjT+Ai2ygdnm+yROfE0A, fabio.estevam-KZfg59tc24xl57MIdRCFDg, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, linux-lFZ/pmaqli7XmaaqVzeoHQ, p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ, Gary Bisson Signed-off-by: Gary Bisson <gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org> --- arch/arm/boot/dts/imx6dl-sabrelite.dts | 40 ++++++++++++++++++++++++++++---- arch/arm/boot/dts/imx6q-sabrelite.dts | 40 ++++++++++++++++++++++++++++---- arch/arm/boot/dts/imx6qdl-sabrelite.dtsi | 40 ++++++++++++++++++++++++++++---- 3 files changed, 105 insertions(+), 15 deletions(-) diff --git a/arch/arm/boot/dts/imx6dl-sabrelite.dts b/arch/arm/boot/dts/imx6dl-sabrelite.dts index 2de0447..0f06ca5 100644 --- a/arch/arm/boot/dts/imx6dl-sabrelite.dts +++ b/arch/arm/boot/dts/imx6dl-sabrelite.dts @@ -2,12 +2,42 @@ * Copyright 2011 Freescale Semiconductor, Inc. * Copyright 2011 Linaro Ltd. * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts index 96e4688..66d10d8 100644 --- a/arch/arm/boot/dts/imx6q-sabrelite.dts +++ b/arch/arm/boot/dts/imx6q-sabrelite.dts @@ -2,12 +2,42 @@ * Copyright 2011 Freescale Semiconductor, Inc. * Copyright 2011 Linaro Ltd. * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi index 2f85106..d2cb491 100644 --- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi @@ -2,12 +2,42 @@ * Copyright 2011 Freescale Semiconductor, Inc. * Copyright 2011 Linaro Ltd. * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> -- 2.5.3 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply related [flat|nested] 46+ messages in thread
* [RESEND][PATCH v3 5/9] of: Add Boundary Devices Inc. vendor prefix [not found] ` <1443620806-14792-1-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org> ` (2 preceding siblings ...) 2015-09-30 13:46 ` [RESEND][PATCH v3 4/9] ARM: dts: imx6qdl-sabrelite: " Gary Bisson @ 2015-09-30 13:46 ` Gary Bisson [not found] ` <1443620806-14792-6-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org> 2015-09-30 13:46 ` [RESEND][PATCH v3 6/9] ARM: dts: imx6q-nitrogen6x: change manufacturer to Boundary Devices Gary Bisson ` (3 subsequent siblings) 7 siblings, 1 reply; 46+ messages in thread From: Gary Bisson @ 2015-09-30 13:46 UTC (permalink / raw) To: devicetree-u79uwXL29TY76Z2rM5mHXA Cc: shawnguo-DgEjT+Ai2ygdnm+yROfE0A, kernel-bIcnvbaLZ9MEGnE8C9+IrQ, robh+dt-DgEjT+Ai2ygdnm+yROfE0A, fabio.estevam-KZfg59tc24xl57MIdRCFDg, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, linux-lFZ/pmaqli7XmaaqVzeoHQ, p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ, Gary Bisson This patch adds the vendor prefix for Boundary Devices Inc. which is a supplier of ARM-based single board computers and System-on-Modules for the general embedded market. Website: http://boundarydevices.com/ Signed-off-by: Gary Bisson <gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org> --- Documentation/devicetree/bindings/vendor-prefixes.txt | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index 82d2ac9..eca468d 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -34,6 +34,7 @@ avago Avago Technologies avic Shanghai AVIC Optoelectronics Co., Ltd. axis Axis Communications AB bosch Bosch Sensortec GmbH +boundary Boundary Devices Inc. brcm Broadcom Corporation buffalo Buffalo, Inc. calxeda Calxeda -- 2.5.3 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply related [flat|nested] 46+ messages in thread
[parent not found: <1443620806-14792-6-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>]
* Re: [RESEND][PATCH v3 5/9] of: Add Boundary Devices Inc. vendor prefix [not found] ` <1443620806-14792-6-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org> @ 2015-10-01 13:26 ` Rob Herring 0 siblings, 0 replies; 46+ messages in thread From: Rob Herring @ 2015-10-01 13:26 UTC (permalink / raw) To: Gary Bisson Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, shawnguo-DgEjT+Ai2ygdnm+yROfE0A, kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org, Fabio Estevam, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, Russell King - ARM Linux, Philipp Zabel On Wed, Sep 30, 2015 at 8:46 AM, Gary Bisson <gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org> wrote: > This patch adds the vendor prefix for Boundary Devices Inc. which is a > supplier of ARM-based single board computers and System-on-Modules for > the general embedded market. > > Website: http://boundarydevices.com/ > > Signed-off-by: Gary Bisson <gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org> Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org> > --- > Documentation/devicetree/bindings/vendor-prefixes.txt | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt > index 82d2ac9..eca468d 100644 > --- a/Documentation/devicetree/bindings/vendor-prefixes.txt > +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt > @@ -34,6 +34,7 @@ avago Avago Technologies > avic Shanghai AVIC Optoelectronics Co., Ltd. > axis Axis Communications AB > bosch Bosch Sensortec GmbH > +boundary Boundary Devices Inc. > brcm Broadcom Corporation > buffalo Buffalo, Inc. > calxeda Calxeda > -- > 2.5.3 > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 46+ messages in thread
* [RESEND][PATCH v3 6/9] ARM: dts: imx6q-nitrogen6x: change manufacturer to Boundary Devices [not found] ` <1443620806-14792-1-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org> ` (3 preceding siblings ...) 2015-09-30 13:46 ` [RESEND][PATCH v3 5/9] of: Add Boundary Devices Inc. vendor prefix Gary Bisson @ 2015-09-30 13:46 ` Gary Bisson 2015-09-30 13:46 ` [RESEND][PATCH v3 7/9] ARM: dts: imx6dl-nitrogen6x: " Gary Bisson ` (2 subsequent siblings) 7 siblings, 0 replies; 46+ messages in thread From: Gary Bisson @ 2015-09-30 13:46 UTC (permalink / raw) To: devicetree-u79uwXL29TY76Z2rM5mHXA Cc: shawnguo-DgEjT+Ai2ygdnm+yROfE0A, kernel-bIcnvbaLZ9MEGnE8C9+IrQ, robh+dt-DgEjT+Ai2ygdnm+yROfE0A, fabio.estevam-KZfg59tc24xl57MIdRCFDg, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, linux-lFZ/pmaqli7XmaaqVzeoHQ, p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ, Gary Bisson Signed-off-by: Gary Bisson <gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org> --- arch/arm/boot/dts/imx6q-nitrogen6x.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/imx6q-nitrogen6x.dts b/arch/arm/boot/dts/imx6q-nitrogen6x.dts index 8088cfc..d168633 100644 --- a/arch/arm/boot/dts/imx6q-nitrogen6x.dts +++ b/arch/arm/boot/dts/imx6q-nitrogen6x.dts @@ -46,8 +46,8 @@ #include "imx6qdl-nitrogen6x.dtsi" / { - model = "Freescale i.MX6 Quad Nitrogen6x Board"; - compatible = "fsl,imx6q-nitrogen6x", "fsl,imx6q"; + model = "Boundary Devices i.MX6 Quad Nitrogen6x Board"; + compatible = "boundary,imx6q-nitrogen6x", "fsl,imx6q"; }; &sata { -- 2.5.3 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply related [flat|nested] 46+ messages in thread
* [RESEND][PATCH v3 7/9] ARM: dts: imx6dl-nitrogen6x: change manufacturer to Boundary Devices [not found] ` <1443620806-14792-1-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org> ` (4 preceding siblings ...) 2015-09-30 13:46 ` [RESEND][PATCH v3 6/9] ARM: dts: imx6q-nitrogen6x: change manufacturer to Boundary Devices Gary Bisson @ 2015-09-30 13:46 ` Gary Bisson 2015-09-30 13:46 ` [RESEND][PATCH v3 8/9] ARM: dts: imx: add Boundary Devices Nitrogen6_Max board Gary Bisson 2015-09-30 13:46 ` [RESEND][PATCH v3 9/9] ARM: dts: imx: add Boundary Devices Nitrogen6_Lite board Gary Bisson 7 siblings, 0 replies; 46+ messages in thread From: Gary Bisson @ 2015-09-30 13:46 UTC (permalink / raw) To: devicetree-u79uwXL29TY76Z2rM5mHXA Cc: shawnguo-DgEjT+Ai2ygdnm+yROfE0A, kernel-bIcnvbaLZ9MEGnE8C9+IrQ, robh+dt-DgEjT+Ai2ygdnm+yROfE0A, fabio.estevam-KZfg59tc24xl57MIdRCFDg, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, linux-lFZ/pmaqli7XmaaqVzeoHQ, p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ, Gary Bisson Signed-off-by: Gary Bisson <gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org> --- arch/arm/boot/dts/imx6dl-nitrogen6x.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/imx6dl-nitrogen6x.dts b/arch/arm/boot/dts/imx6dl-nitrogen6x.dts index 54bc4cd..8398f97 100644 --- a/arch/arm/boot/dts/imx6dl-nitrogen6x.dts +++ b/arch/arm/boot/dts/imx6dl-nitrogen6x.dts @@ -46,6 +46,6 @@ #include "imx6qdl-nitrogen6x.dtsi" / { - model = "Freescale i.MX6 DualLite Nitrogen6x Board"; - compatible = "fsl,imx6dl-nitrogen6x", "fsl,imx6dl"; + model = "Boundary Devices i.MX6 DualLite Nitrogen6x Board"; + compatible = "boundary,imx6dl-nitrogen6x", "fsl,imx6dl"; }; -- 2.5.3 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply related [flat|nested] 46+ messages in thread
* [RESEND][PATCH v3 8/9] ARM: dts: imx: add Boundary Devices Nitrogen6_Max board [not found] ` <1443620806-14792-1-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org> ` (5 preceding siblings ...) 2015-09-30 13:46 ` [RESEND][PATCH v3 7/9] ARM: dts: imx6dl-nitrogen6x: " Gary Bisson @ 2015-09-30 13:46 ` Gary Bisson 2015-09-30 13:46 ` [RESEND][PATCH v3 9/9] ARM: dts: imx: add Boundary Devices Nitrogen6_Lite board Gary Bisson 7 siblings, 0 replies; 46+ messages in thread From: Gary Bisson @ 2015-09-30 13:46 UTC (permalink / raw) To: devicetree-u79uwXL29TY76Z2rM5mHXA Cc: shawnguo-DgEjT+Ai2ygdnm+yROfE0A, kernel-bIcnvbaLZ9MEGnE8C9+IrQ, robh+dt-DgEjT+Ai2ygdnm+yROfE0A, fabio.estevam-KZfg59tc24xl57MIdRCFDg, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, linux-lFZ/pmaqli7XmaaqVzeoHQ, p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ, Gary Bisson Based on i.MX6 Quad with 4GB of DDR3. http://boundarydevices.com/product/nitrogen6max/ Signed-off-by: Gary Bisson <gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org> --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/imx6q-nitrogen6_max.dts | 53 ++ arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi | 873 +++++++++++++++++++++++++++ 3 files changed, 927 insertions(+) create mode 100644 arch/arm/boot/dts/imx6q-nitrogen6_max.dts create mode 100644 arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index cce5468..cd467e4 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -314,6 +314,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6q-gw552x.dtb \ imx6q-hummingboard.dtb \ imx6q-nitrogen6x.dtb \ + imx6q-nitrogen6_max.dtb \ imx6q-phytec-pbab01.dtb \ imx6q-rex-pro.dtb \ imx6q-sabreauto.dtb \ diff --git a/arch/arm/boot/dts/imx6q-nitrogen6_max.dts b/arch/arm/boot/dts/imx6q-nitrogen6_max.dts new file mode 100644 index 0000000..d417457 --- /dev/null +++ b/arch/arm/boot/dts/imx6q-nitrogen6_max.dts @@ -0,0 +1,53 @@ +/* + * Copyright 2015 Boundary Devices, Inc. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ +/dts-v1/; + +#include "imx6q.dtsi" +#include "imx6qdl-nitrogen6_max.dtsi" + +/ { + model = "Boundary Devices i.MX6 Quad Nitrogen6_MAX Board"; + compatible = "boundary,imx6q-nitrogen6_max", "fsl,imx6q"; +}; + +&sata { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi new file mode 100644 index 0000000..a35d54f --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi @@ -0,0 +1,873 @@ +/* + * Copyright 2015 Boundary Devices, Inc. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + chosen { + stdout-path = &uart2; + }; + + memory { + reg = <0x10000000 0xF0000000>; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_1p8v: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "1P8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + reg_2p5v: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "2P5V"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; + + reg_3p3v: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_usb_otg_vbus: regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usb_h1_vbus: regulator@4 { + compatible = "regulator-fixed"; + reg = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh1>; + regulator-name = "usb_h1_vbus"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_wlan_vmmc: regulator@5 { + compatible = "regulator-fixed"; + reg = <5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wlan_vmmc>; + regulator-name = "reg_wlan_vmmc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio6 15 GPIO_ACTIVE_HIGH>; + startup-delay-us = <70000>; + enable-active-high; + }; + + reg_can_xcvr: regulator@6 { + compatible = "regulator-fixed"; + reg = <6>; + regulator-name = "CAN XCVR"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can_xcvr>; + gpio = <&gpio1 2 GPIO_ACTIVE_LOW>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_keys>; + + power { + label = "Power Button"; + gpios = <&gpio2 3 GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + gpio-key,wakeup; + }; + + menu { + label = "Menu"; + gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; + linux,code = <KEY_MENU>; + }; + + home { + label = "Home"; + gpios = <&gpio2 4 GPIO_ACTIVE_LOW>; + linux,code = <KEY_HOME>; + }; + + back { + label = "Back"; + gpios = <&gpio2 2 GPIO_ACTIVE_LOW>; + linux,code = <KEY_BACK>; + }; + + volume-up { + label = "Volume Up"; + gpios = <&gpio7 13 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + }; + + volume-down { + label = "Volume Down"; + gpios = <&gpio7 1 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEDOWN>; + }; + }; + + i2cmux@2 { + compatible = "i2c-mux-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2mux>; + #address-cells = <1>; + #size-cells = <0>; + mux-gpios = <&gpio3 20 GPIO_ACTIVE_HIGH + &gpio4 15 GPIO_ACTIVE_HIGH>; + i2c-parent = <&i2c2>; + idle-state = <0>; + + i2c2@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c2@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + i2cmux@3 { + compatible = "i2c-mux-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3mux>; + #address-cells = <1>; + #size-cells = <0>; + mux-gpios = <&gpio2 25 GPIO_ACTIVE_HIGH>; + i2c-parent = <&i2c3>; + idle-state = <0>; + + i2c3@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + leds { + compatible = "gpio-leds"; + + speaker-enable { + gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>; + retain-state-suspended; + default-state = "off"; + }; + + ttymxc4-rs232 { + gpios = <&gpio6 10 GPIO_ACTIVE_HIGH>; + retain-state-suspended; + default-state = "on"; + }; + }; + + backlight_lcd: backlight_lcd { + compatible = "pwm-backlight"; + pwms = <&pwm1 0 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <7>; + power-supply = <®_3p3v>; + status = "okay"; + }; + + backlight_lvds0: backlight_lvds0 { + compatible = "pwm-backlight"; + pwms = <&pwm4 0 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <7>; + power-supply = <®_3p3v>; + status = "okay"; + }; + + backlight_lvds1: backlight_lvds1 { + compatible = "pwm-backlight"; + pwms = <&pwm2 0 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <7>; + power-supply = <®_3p3v>; + status = "okay"; + }; + + lcd_display: display@di0 { + compatible = "fsl,imx-parallel-display"; + #address-cells = <1>; + #size-cells = <0>; + interface-pix-fmt = "bgr666"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_j15>; + status = "okay"; + + port@0 { + reg = <0>; + + lcd_display_in: endpoint { + remote-endpoint = <&ipu1_di0_disp0>; + }; + }; + + port@1 { + reg = <1>; + + lcd_display_out: endpoint { + remote-endpoint = <&lcd_panel_in>; + }; + }; + }; + + panel_lcd { + compatible = "okaya,rs800480t-7x0gp"; + backlight = <&backlight_lcd>; + + port { + lcd_panel_in: endpoint { + remote-endpoint = <&lcd_display_out>; + }; + }; + }; + + panel_lvds0 { + compatible = "hannstar,hsd100pxn1"; + backlight = <&backlight_lvds0>; + + port { + panel_in_lvds0: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + }; + + panel_lvds1 { + compatible = "hannstar,hsd100pxn1"; + backlight = <&backlight_lvds1>; + + port { + panel_in_lvds1: endpoint { + remote-endpoint = <&lvds1_out>; + }; + }; + }; + + sound { + compatible = "fsl,imx6q-nitrogen6_max-sgtl5000", + "fsl,imx-audio-sgtl5000"; + model = "imx6q-nitrogen6_max-sgtl5000"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sgtl5000>; + ssi-controller = <&ssi1>; + audio-codec = <&codec>; + audio-routing = + "MIC_IN", "Mic Jack", + "Mic Jack", "Mic Bias", + "Headphone Jack", "HP_OUT"; + mux-int-port = <1>; + mux-ext-port = <3>; + }; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux>; + status = "okay"; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can1>; + xceiver-supply = <®_can_xcvr>; + status = "okay"; +}; + +&clks { + assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, + <&clks IMX6QDL_CLK_LDB_DI1_SEL>; + assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>, + <&clks IMX6QDL_CLK_PLL3_USB_OTG>; +}; + +&ecspi1 { + fsl,spi-num-chipselects = <1>; + cs-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + status = "okay"; + + flash: m25p80@0 { + compatible = "microchip,sst25vf016b"; + spi-max-frequency = <20000000>; + reg = <0>; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rgmii"; + phy-reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>; + txen-skew-ps = <0>; + txc-skew-ps = <3000>; + rxdv-skew-ps = <0>; + rxc-skew-ps = <3000>; + rxd0-skew-ps = <0>; + rxd1-skew-ps = <0>; + rxd2-skew-ps = <0>; + rxd3-skew-ps = <0>; + txd0-skew-ps = <0>; + txd1-skew-ps = <0>; + txd2-skew-ps = <0>; + txd3-skew-ps = <0>; + interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>, + <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>; + status = "okay"; +}; + +&hdmi { + ddc-i2c-bus = <&i2c2>; + status = "okay"; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + codec: sgtl5000@0a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + clocks = <&clks 201>; + VDDA-supply = <®_2p5v>; + VDDIO-supply = <®_3p3v>; + }; + + rtc: rtc@68 { + compatible = "st,rv4162"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rv4162>; + reg = <0x68>; + interrupts-extended = <&gpio4 6 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + touchscreen@04 { + compatible = "eeti,egalax_ts"; + reg = <0x04>; + interrupt-parent = <&gpio1>; + interrupts = <9 IRQ_TYPE_EDGE_FALLING>; + wakeup-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; + }; + + touchscreen@38 { + compatible = "edt,edt-ft5x06"; + reg = <0x38>; + interrupt-parent = <&gpio1>; + interrupts = <9 IRQ_TYPE_EDGE_FALLING>; + }; +}; + +&iomuxc { + imx6q-nitrogen6_max { + pinctrl_audmux: audmuxgrp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0 + MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0 + MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0 + MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0 + >; + }; + + pinctrl_can1: can1grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b0 + MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b0 + >; + }; + + pinctrl_can_xcvr: can-xcvrgrp { + fsl,pins = < + /* Flexcan XCVR enable */ + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0 + >; + }; + + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 + MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 + MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 + MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x000b1 + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x100b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x100b0 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x100b0 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x100b0 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x100b0 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x100b0 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x100b0 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x100b0 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x100b0 + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 + /* Phy reset */ + MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x0f0b0 + MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0 + MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1 + >; + }; + + pinctrl_gpio_keys: gpio_keysgrp { + fsl,pins = < + /* Power Button */ + MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0 + /* Menu Button */ + MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0 + /* Home Button */ + MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x1b0b0 + /* Back Button */ + MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0 + /* Volume Up Button */ + MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x1b0b0 + /* Volume Down Button */ + MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x1b0b0 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c2mux: i2c2muxgrp { + fsl,pins = < + /* ov5642 camera i2c enable */ + MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x000b0 + /* ov5640_mipi camera i2c enable */ + MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x000b0 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_16__I2C3_SDA 0x4001b8b1 + MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0 + >; + }; + + pinctrl_i2c3mux: i2c3muxgrp { + fsl,pins = < + /* PCIe I2C enable */ + MX6QDL_PAD_EIM_OE__GPIO2_IO25 0x000b0 + >; + }; + + pinctrl_j15: j15grp { + fsl,pins = < + MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10 + MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x10 + MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x10 + MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x10 + MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x10 + MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x10 + MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x10 + MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x10 + MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x10 + MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x10 + MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x10 + MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x10 + MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x10 + MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x10 + MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x10 + MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x10 + MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x10 + MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x10 + MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x10 + MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x10 + MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x10 + MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x10 + MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x10 + MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x10 + MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x10 + MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x10 + MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x10 + MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x10 + >; + }; + + pinctrl_pcie: pciegrp { + fsl,pins = < + /* PCIe reset */ + MX6QDL_PAD_EIM_BCLK__GPIO6_IO31 0x000b0 + >; + }; + + pinctrl_pwm1: pwm1grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1 + >; + }; + + pinctrl_pwm2: pwm2grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1 + >; + }; + + pinctrl_pwm3: pwm3grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1 + >; + }; + + pinctrl_pwm4: pwm4grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1 + >; + }; + + pinctrl_rv4162: rv4162grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0 + >; + }; + + pinctrl_sgtl5000: sgtl5000grp { + fsl,pins = < + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x000b0 + MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x1b0b0 + MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart5: uart5grp { + fsl,pins = < + MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x130b1 + MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x030b1 + /* RS485 RX Enable: pull up */ + MX6QDL_PAD_NANDF_RB0__GPIO6_IO10 0x1b0b1 + /* RS485 DEN: pull down */ + MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x030b1 + /* RS485/!RS232 Select: pull down (rs232) */ + MX6QDL_PAD_EIM_CS1__GPIO2_IO24 0x030b1 + /* ON: pull down */ + MX6QDL_PAD_NANDF_ALE__GPIO6_IO08 0x030b1 + >; + }; + + pinctrl_usbh1: usbh1grp { + fsl,pins = < + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x0b0b0 + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 + MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x1b0b0 + /* power enable, high active */ + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x000b0 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x100b0 + MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0 + >; + }; + + pinctrl_usdhc4: usdhc4grp { + fsl,pins = < + MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059 + MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059 + MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059 + MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059 + MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059 + MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059 + MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059 + MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059 + MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059 + MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059 + >; + }; + + pinctrl_wlan_vmmc: wlan_vmmcgrp { + fsl,pins = < + MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x100b0 + MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x000b0 + MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x000b0 + MX6QDL_PAD_SD1_CLK__OSC32K_32K_OUT 0x000b0 + >; + }; + }; +}; + +&ipu1_di0_disp0 { + remote-endpoint = <&lcd_display_in>; +}; + +&ldb { + status = "okay"; + + lvds-channel@0 { + fsl,data-mapping = "spwg"; + fsl,data-width = <18>; + status = "okay"; + + port@4 { + reg = <4>; + + lvds0_out: endpoint { + remote-endpoint = <&panel_in_lvds0>; + }; + }; + }; + + lvds-channel@1 { + fsl,data-mapping = "spwg"; + fsl,data-width = <18>; + status = "okay"; + + port@4 { + reg = <4>; + + lvds1_out: endpoint { + remote-endpoint = <&panel_in_lvds1>; + }; + }; + }; +}; + +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie>; + reset-gpio = <&gpio6 31 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "okay"; +}; + +&pwm2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm2>; + status = "okay"; +}; + +&pwm3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm3>; + status = "okay"; +}; + +&pwm4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm4>; + status = "okay"; +}; + +&ssi1 { + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + status = "okay"; +}; + +&usbh1 { + vbus-supply = <®_usb_h1_vbus>; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_usb_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + disable-over-current; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + bus-width = <4>; + non-removable; + vmmc-supply = <®_wlan_vmmc>; + cap-power-off-card; + keep-power-in-suspend; + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + wlcore: wlcore@2 { + compatible = "ti,wl1271"; + reg = <2>; + interrupt-parent = <&gpio6>; + interrupts = <11 IRQ_TYPE_LEVEL_HIGH>; + ref-clock-frequency = <38400000>; + }; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; + bus-width = <4>; + vmmc-supply = <®_3p3v>; + status = "okay"; +}; + +&usdhc4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc4>; + bus-width = <8>; + non-removable; + vmmc-supply = <®_1p8v>; + keep-power-in-suspend; + status = "okay"; +}; -- 2.5.3 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply related [flat|nested] 46+ messages in thread
* [RESEND][PATCH v3 9/9] ARM: dts: imx: add Boundary Devices Nitrogen6_Lite board [not found] ` <1443620806-14792-1-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org> ` (6 preceding siblings ...) 2015-09-30 13:46 ` [RESEND][PATCH v3 8/9] ARM: dts: imx: add Boundary Devices Nitrogen6_Max board Gary Bisson @ 2015-09-30 13:46 ` Gary Bisson 7 siblings, 0 replies; 46+ messages in thread From: Gary Bisson @ 2015-09-30 13:46 UTC (permalink / raw) To: devicetree-u79uwXL29TY76Z2rM5mHXA Cc: shawnguo-DgEjT+Ai2ygdnm+yROfE0A, kernel-bIcnvbaLZ9MEGnE8C9+IrQ, robh+dt-DgEjT+Ai2ygdnm+yROfE0A, fabio.estevam-KZfg59tc24xl57MIdRCFDg, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, linux-lFZ/pmaqli7XmaaqVzeoHQ, p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ, Gary Bisson Based on an i.MX6 Solo with 512MB DDR3. http://boundarydevices.com/product/nitrogen6_lite/ Signed-off-by: Gary Bisson <gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org> --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/imx6dl-nit6xlite.dts | 49 +++ arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi | 630 +++++++++++++++++++++++++++++++ 3 files changed, 680 insertions(+) create mode 100644 arch/arm/boot/dts/imx6dl-nit6xlite.dts create mode 100644 arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index cd467e4..21ba888 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -285,6 +285,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6dl-gw551x.dtb \ imx6dl-gw552x.dtb \ imx6dl-hummingboard.dtb \ + imx6dl-nit6xlite.dtb \ imx6dl-nitrogen6x.dtb \ imx6dl-phytec-pbab01.dtb \ imx6dl-rex-basic.dtb \ diff --git a/arch/arm/boot/dts/imx6dl-nit6xlite.dts b/arch/arm/boot/dts/imx6dl-nit6xlite.dts new file mode 100644 index 0000000..e0161e4 --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-nit6xlite.dts @@ -0,0 +1,49 @@ +/* + * Copyright 2015 Boundary Devices, Inc. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ +/dts-v1/; + +#include "imx6dl.dtsi" +#include "imx6qdl-nit6xlite.dtsi" + +/ { + model = "Boundary Devices i.MX6 Solo Nitrogen6_Lite Board"; + compatible = "boundary,imx6dl-nit6xlite", "fsl,imx6dl"; +}; diff --git a/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi b/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi new file mode 100644 index 0000000..24d7d3f --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi @@ -0,0 +1,630 @@ +/* + * Copyright 2015 Boundary Devices, Inc. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + chosen { + stdout-path = &uart2; + }; + + memory { + reg = <0x10000000 0x20000000>; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_2p5v: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "2P5V"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; + + reg_3p3v: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_usb_otg_vbus: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_wlan_vmmc: regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wlan_vmmc>; + regulator-name = "reg_wlan_vmmc"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&gpio6 7 GPIO_ACTIVE_HIGH>; + startup-delay-us = <70000>; + enable-active-high; + }; + }; + + bt_rfkill { + compatible = "rfkill-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_bt_rfkill>; + gpios = <&gpio6 8 GPIO_ACTIVE_HIGH>; + name = "bt_rfkill"; + type = <2>; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_keys>; + + home { + label = "Home"; + gpios = <&gpio7 13 IRQ_TYPE_LEVEL_LOW>; + linux,code = <102>; + }; + + back { + label = "Back"; + gpios = <&gpio4 5 IRQ_TYPE_LEVEL_LOW>; + linux,code = <158>; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_leds>; + + j14-pin1 { + gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; + retain-state-suspended; + default-state = "off"; + }; + + j14-pin3 { + gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; + retain-state-suspended; + default-state = "off"; + }; + + j14-pins8-9 { + gpios = <&gpio3 29 GPIO_ACTIVE_LOW>; + retain-state-suspended; + default-state = "off"; + }; + + j46-pin2 { + gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; + retain-state-suspended; + default-state = "off"; + }; + + j46-pin3 { + gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; + retain-state-suspended; + default-state = "off"; + }; + }; + + backlight_lcd { + compatible = "pwm-backlight"; + pwms = <&pwm1 0 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <7>; + power-supply = <®_3p3v>; + status = "okay"; + }; + + backlight_lvds0: backlight_lvds0 { + compatible = "pwm-backlight"; + pwms = <&pwm4 0 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <7>; + power-supply = <®_3p3v>; + status = "okay"; + }; + + panel_lvds0 { + compatible = "hannstar,hsd100pxn1"; + backlight = <&backlight_lvds0>; + + port { + panel_in_lvds0: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + }; + + sound { + compatible = "fsl,imx6dl-nit6xlite-sgtl5000", + "fsl,imx-audio-sgtl5000"; + model = "imx6dl-nit6xlite-sgtl5000"; + ssi-controller = <&ssi1>; + audio-codec = <&codec>; + audio-routing = + "MIC_IN", "Mic Jack", + "Mic Jack", "Mic Bias", + "Headphone Jack", "HP_OUT"; + mux-int-port = <1>; + mux-ext-port = <3>; + }; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux>; + status = "okay"; +}; + +&clks { + assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, + <&clks IMX6QDL_CLK_LDB_DI1_SEL>; + assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>, + <&clks IMX6QDL_CLK_PLL3_USB_OTG>; +}; + +&ecspi1 { + fsl,spi-num-chipselects = <1>; + cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + status = "okay"; + + flash: m25p80@0 { + compatible = "microchip,sst25vf016b"; + spi-max-frequency = <20000000>; + reg = <0>; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rgmii"; + phy-reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>; + txen-skew-ps = <0>; + txc-skew-ps = <3000>; + rxdv-skew-ps = <0>; + rxc-skew-ps = <3000>; + rxd0-skew-ps = <0>; + rxd1-skew-ps = <0>; + rxd2-skew-ps = <0>; + rxd3-skew-ps = <0>; + txd0-skew-ps = <0>; + txd1-skew-ps = <0>; + txd2-skew-ps = <0>; + txd3-skew-ps = <0>; + interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>, + <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>; + status = "okay"; +}; + +&hdmi { + ddc-i2c-bus = <&i2c2>; + status = "okay"; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + codec: sgtl5000@0a { + compatible = "fsl,sgtl5000"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sgtl5000>; + reg = <0x0a>; + clocks = <&clks 201>; + VDDA-supply = <®_2p5v>; + VDDIO-supply = <®_3p3v>; + }; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + touchscreen@04 { + compatible = "eeti,egalax_ts"; + reg = <0x04>; + interrupt-parent = <&gpio1>; + interrupts = <9 IRQ_TYPE_EDGE_FALLING>; + wakeup-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; + }; + + touchscreen@38 { + compatible = "edt,edt-ft5x06"; + reg = <0x38>; + interrupt-parent = <&gpio1>; + interrupts = <9 IRQ_TYPE_EDGE_FALLING>; + }; + + rtc@6f { + compatible = "isil,isl1208"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rtc>; + reg = <0x6f>; + interrupts-extended = <&gpio2 26 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_j10>; + pinctrl-1 = <&pinctrl_j28>; + + imx6dl-nit6xlite { + pinctrl_audmux: audmuxgrp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0 + MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0 + MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0 + MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0 + >; + }; + + pinctrl_bt_rfkill: bt_rfkillgrp { + fsl,pins = < + /* BT wake */ + MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0 + /* BT reset */ + MX6QDL_PAD_NANDF_ALE__GPIO6_IO08 0x0b0b0 + /* BT reg en */ + MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x1b0b0 + /* BT host wake irq */ + MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x100b0 + >; + }; + + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 + MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 + MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 + MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x000b1 + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x100b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x100b0 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x100b0 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x100b0 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x100b0 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x100b0 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x100b0 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x100b0 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x100b0 + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 + /* Phy reset */ + MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x0f0b0 + MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0 + MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1 + >; + }; + + pinctrl_gpio_keys: gpio_keysgrp { + fsl,pins = < + /* Home Button: J14 pin 5 */ + MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x1b0b0 + /* Back Button: J14 pin 7 */ + MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x1b0b0 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_16__I2C3_SDA 0x4001b8b1 + /* Touch IRQ: J7 pin 4 */ + MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0 + /* tcs2004 IRQ */ + MX6QDL_PAD_EIM_LBA__GPIO2_IO27 0x1b0b0 + /* tsc2004 reset */ + MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x0b0b0 + >; + }; + + pinctrl_j10: j10grp { + fsl,pins = < + /* Broadcom WiFi module pins */ + MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x1b0b0 + MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0 + MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0 + MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x1b0b0 + MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09 0x0b0b0 + MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x1b0b0 + MX6QDL_PAD_SD1_CLK__OSC32K_32K_OUT 0x000b0 + >; + }; + + pinctrl_j28: j28grp { + fsl,pins = < + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0 + >; + }; + + pinctrl_leds: ledsgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x0b0b0 + MX6QDL_PAD_GPIO_3__GPIO1_IO03 0x0b0b0 + MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x030b0 + MX6QDL_PAD_GPIO_7__GPIO1_IO07 0x0b0b0 + MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0b0b0 + >; + }; + + pinctrl_pwm1: pwm1grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1 + >; + }; + + pinctrl_pwm3: pwm3grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1 + >; + }; + + pinctrl_pwm4: pwm4grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1 + >; + }; + + pinctrl_wlan_vmmc: wlan_vmmcgrp { + fsl,pins = < + MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x030b0 + >; + }; + + pinctrl_rtc: rtcgrp { + fsl,pins = < + MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x1b0b0 + >; + }; + + pinctrl_sgtl5000: sgtl5000grp { + fsl,pins = < + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x000b0 + MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x1b0b0 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D23__UART3_CTS_B 0x1b0b1 + MX6QDL_PAD_EIM_D31__UART3_RTS_B 0x1b0b1 + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 + MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x1b0b0 + /* power enable, high active */ + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x000b0 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0 + >; + }; + }; +}; + +&ldb { + status = "okay"; + + lvds-channel@0 { + fsl,data-mapping = "spwg"; + fsl,data-width = <18>; + status = "okay"; + + port@4 { + reg = <4>; + + lvds0_out: endpoint { + remote-endpoint = <&panel_in_lvds0>; + }; + }; + }; +}; + +&pcie { + status = "okay"; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "okay"; +}; + +&pwm3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm3>; + status = "okay"; +}; + +&pwm4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm4>; + status = "okay"; +}; + +&ssi1 { + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + fsl,uart-has-rtscts; + status = "okay"; +}; + +&usbh1 { + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_usb_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + disable-over-current; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + bus-width = <4>; + non-removable; + vmmc-supply = <®_3p3v>; + vqmmc-supply = <®_wlan_vmmc>; + vqmmc-1-8-v; + ocr-limit = <0x180>; /* 1.65v - 2.1v */ + cap-power-off-card; + keep-power-in-suspend; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; + vmmc-supply = <®_3p3v>; + status = "okay"; +}; -- 2.5.3 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply related [flat|nested] 46+ messages in thread
* Re: [RESEND][PATCH v3 0/9] ARM: dts: update Boundary Devices boards support 2015-09-30 13:46 ` [RESEND][PATCH " Gary Bisson 2015-09-30 13:46 ` [RESEND][PATCH v3 1/9] ARM: dts: imx6dql-nitrogen6x: add touchscreen support Gary Bisson [not found] ` <1443620806-14792-1-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org> @ 2015-10-08 8:02 ` Shawn Guo 2 siblings, 0 replies; 46+ messages in thread From: Shawn Guo @ 2015-10-08 8:02 UTC (permalink / raw) To: Gary Bisson Cc: fabio.estevam, devicetree, linux, p.zabel, robh+dt, kernel, linux-arm-kernel On Wed, Sep 30, 2015 at 03:46:37PM +0200, Gary Bisson wrote: > Gary Bisson (9): > ARM: dts: imx6dql-nitrogen6x: add touchscreen support > ARM: dts: imx6qdl-nitrogen6x: add wifi wl1271 support > ARM: dts: imx6qdl-nitrogen6x: relicense under GPLv2/X11 > ARM: dts: imx6qdl-sabrelite: relicense under GPLv2/X11 > of: Add Boundary Devices Inc. vendor prefix > ARM: dts: imx6q-nitrogen6x: change manufacturer to Boundary Devices > ARM: dts: imx6dl-nitrogen6x: change manufacturer to Boundary Devices > ARM: dts: imx: add Boundary Devices Nitrogen6_Max board > ARM: dts: imx: add Boundary Devices Nitrogen6_Lite board Applied all, thanks. ^ permalink raw reply [flat|nested] 46+ messages in thread
end of thread, other threads:[~2015-10-08 8:02 UTC | newest]
Thread overview: 46+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2015-09-07 16:57 [PATCH 0/4] ARM: dts: update Boundary Devices boards support Gary Bisson
[not found] ` <1441645069-27263-1-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
2015-09-07 16:57 ` [PATCH 1/4] ARM: dts: imx6dql-nitrogen6x: add touchscreen support Gary Bisson
[not found] ` <1441645069-27263-2-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
2015-09-08 6:58 ` Philipp Zabel
[not found] ` <1441695483.3241.5.camel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2015-09-08 13:12 ` Gary Bisson
2015-09-07 16:57 ` [PATCH 2/4] ARM: dts: imx6qdl-nitrogen6x: add wifi wl1271 support Gary Bisson
2015-09-07 16:57 ` [PATCH 3/4] ARM: dts: imx: add Boundary Devices Nitrogen6_Max board Gary Bisson
2015-09-07 16:57 ` [PATCH 4/4] ARM: dts: imx: add Boundary Devices Nitrogen6_Lite board Gary Bisson
[not found] ` <1441645069-27263-5-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
2015-09-08 1:08 ` Fabio Estevam
[not found] ` <CAOMZO5Bb5TwtV4=C4jtU9KpuwtYSdYcSCgQVMMOY0FMf7hZx8w-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-09-08 10:18 ` Gary Bisson
[not found] ` <CAAMH-ysfTs9W+dWdS7DR9=KKPxij1DEHEevMn3+TMp8gqvoELQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-09-08 11:41 ` Fabio Estevam
2015-09-08 14:34 ` [PATCH v2 0/9] ARM: dts: update Boundary Devices boards support Gary Bisson
[not found] ` <1441722886-22798-1-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
2015-09-08 14:34 ` [PATCH v2 1/9] ARM: dts: imx6dql-nitrogen6x: add touchscreen support Gary Bisson
[not found] ` <1441722886-22798-2-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
2015-09-08 14:49 ` Philipp Zabel
[not found] ` <1441723760.3241.26.camel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2015-09-08 20:33 ` Russell King - ARM Linux
2015-09-09 10:03 ` Gary Bisson
2015-09-08 14:34 ` [PATCH v2 2/9] ARM: dts: imx6qdl-nitrogen6x: add wifi wl1271 support Gary Bisson
2015-09-08 14:34 ` [PATCH v2 3/9] ARM: dts: imx6qdl-nitrogen6x: relicense under GPLv2/X11 Gary Bisson
2015-09-08 14:34 ` [PATCH v2 4/9] ARM: dts: imx6qdl-sabrelite: " Gary Bisson
2015-09-08 14:34 ` [PATCH v2 5/9] of: Add Boundary Devices Inc. vendor prefix Gary Bisson
2015-09-08 14:34 ` [PATCH v2 6/9] ARM: dts: imx6q-nitrogen6x: change manufacturer to Boundary Devices Gary Bisson
2015-09-08 14:34 ` [PATCH v2 7/9] ARM: dts: imx6dl-nitrogen6x: " Gary Bisson
2015-09-08 14:34 ` [PATCH v2 8/9] ARM: dts: imx: add Boundary Devices Nitrogen6_Max board Gary Bisson
2015-09-08 14:34 ` [PATCH v2 9/9] ARM: dts: imx: add Boundary Devices Nitrogen6_Lite board Gary Bisson
2015-09-09 12:30 ` [PATCH v3 0/9] ARM: dts: update Boundary Devices boards support Gary Bisson
[not found] ` <1441801853-10264-1-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
2015-09-09 12:30 ` [PATCH v3 1/9] ARM: dts: imx6dql-nitrogen6x: add touchscreen support Gary Bisson
2015-09-09 12:30 ` [PATCH v3 2/9] ARM: dts: imx6qdl-nitrogen6x: add wifi wl1271 support Gary Bisson
2015-09-09 12:30 ` [PATCH v3 3/9] ARM: dts: imx6qdl-nitrogen6x: relicense under GPLv2/X11 Gary Bisson
2015-09-09 12:30 ` [PATCH v3 4/9] ARM: dts: imx6qdl-sabrelite: " Gary Bisson
2015-09-09 12:30 ` [PATCH v3 5/9] of: Add Boundary Devices Inc. vendor prefix Gary Bisson
2015-09-09 12:30 ` [PATCH v3 6/9] ARM: dts: imx6q-nitrogen6x: change manufacturer to Boundary Devices Gary Bisson
2015-09-09 12:30 ` [PATCH v3 7/9] ARM: dts: imx6dl-nitrogen6x: " Gary Bisson
2015-09-09 12:30 ` [PATCH v3 8/9] ARM: dts: imx: add Boundary Devices Nitrogen6_Max board Gary Bisson
2015-09-09 12:30 ` [PATCH v3 9/9] ARM: dts: imx: add Boundary Devices Nitrogen6_Lite board Gary Bisson
2015-09-30 6:03 ` [PATCH v3 0/9] ARM: dts: update Boundary Devices boards support Shawn Guo
2015-09-30 13:46 ` [RESEND][PATCH " Gary Bisson
2015-09-30 13:46 ` [RESEND][PATCH v3 1/9] ARM: dts: imx6dql-nitrogen6x: add touchscreen support Gary Bisson
[not found] ` <1443620806-14792-1-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
2015-09-30 13:46 ` [RESEND][PATCH v3 2/9] ARM: dts: imx6qdl-nitrogen6x: add wifi wl1271 support Gary Bisson
2015-09-30 13:46 ` [RESEND][PATCH v3 3/9] ARM: dts: imx6qdl-nitrogen6x: relicense under GPLv2/X11 Gary Bisson
2015-09-30 13:46 ` [RESEND][PATCH v3 4/9] ARM: dts: imx6qdl-sabrelite: " Gary Bisson
2015-09-30 13:46 ` [RESEND][PATCH v3 5/9] of: Add Boundary Devices Inc. vendor prefix Gary Bisson
[not found] ` <1443620806-14792-6-git-send-email-gary.bisson-Q5RJGjKts06CY9SHAMCTRUEOCMrvLtNR@public.gmane.org>
2015-10-01 13:26 ` Rob Herring
2015-09-30 13:46 ` [RESEND][PATCH v3 6/9] ARM: dts: imx6q-nitrogen6x: change manufacturer to Boundary Devices Gary Bisson
2015-09-30 13:46 ` [RESEND][PATCH v3 7/9] ARM: dts: imx6dl-nitrogen6x: " Gary Bisson
2015-09-30 13:46 ` [RESEND][PATCH v3 8/9] ARM: dts: imx: add Boundary Devices Nitrogen6_Max board Gary Bisson
2015-09-30 13:46 ` [RESEND][PATCH v3 9/9] ARM: dts: imx: add Boundary Devices Nitrogen6_Lite board Gary Bisson
2015-10-08 8:02 ` [RESEND][PATCH v3 0/9] ARM: dts: update Boundary Devices boards support Shawn Guo
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).