devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: David Daney <ddaney.cavm-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
	Frank Rowand
	<frowand.list-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
	Grant Likely
	<grant.likely-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Cc: David Daney <david.daney-YGCgFSpz5w/QT0dZR+AlfA@public.gmane.org>
Subject: [PATCH v3] of_pci_irq: Silence bogus "of_irq_parse_pci() failed ..." messages.
Date: Wed,  9 Sep 2015 15:57:59 -0700	[thread overview]
Message-ID: <1441839479-19298-1-git-send-email-ddaney.cavm@gmail.com> (raw)

From: David Daney <david.daney-YGCgFSpz5w/QT0dZR+AlfA@public.gmane.org>

It is perfectly legitimate for a PCI device to have an
PCI_INTERRUPT_PIN value of zero.  This happens if the device doesn't
use interrupts, or on PCIe devices, where only MSI/MSI-X are
supported.

Silence the annoying "of_irq_parse_pci() failed with rc=-19" error
messages by moving the printing code into of_irq_parse_pci(), and only
emitting the message for cases where PCI_INTERRUPT_PIN == 0 is not the
cause for an early exit.

Signed-off-by: David Daney <david.daney-YGCgFSpz5w/QT0dZR+AlfA@public.gmane.org>
---

Changes in v3: Also print the message for failures in
of_irq_parse_raw() (also suggested by Frank Rowand).

Changes in v2: Move the print function in to of_irq_parse_pci() at a
common error exit point (as suggested by Frank Rowand).


 drivers/of/of_pci_irq.c | 22 ++++++++++++++--------
 1 file changed, 14 insertions(+), 8 deletions(-)

diff --git a/drivers/of/of_pci_irq.c b/drivers/of/of_pci_irq.c
index 1710d9d..2306313 100644
--- a/drivers/of/of_pci_irq.c
+++ b/drivers/of/of_pci_irq.c
@@ -38,8 +38,8 @@ int of_irq_parse_pci(const struct pci_dev *pdev, struct of_phandle_args *out_irq
 	 */
 	rc = pci_read_config_byte(pdev, PCI_INTERRUPT_PIN, &pin);
 	if (rc != 0)
-		return rc;
-	/* No pin, exit */
+		goto err;
+	/* No pin, exit with no error message. */
 	if (pin == 0)
 		return -ENODEV;
 
@@ -53,8 +53,10 @@ int of_irq_parse_pci(const struct pci_dev *pdev, struct of_phandle_args *out_irq
 			ppnode = pci_bus_to_OF_node(pdev->bus);
 
 			/* No node for host bridge ? give up */
-			if (ppnode == NULL)
-				return -EINVAL;
+			if (ppnode == NULL) {
+				rc = -EINVAL;
+				goto err;
+			}
 		} else {
 			/* We found a P2P bridge, check if it has a node */
 			ppnode = pci_device_to_OF_node(ppdev);
@@ -86,7 +88,13 @@ int of_irq_parse_pci(const struct pci_dev *pdev, struct of_phandle_args *out_irq
 	out_irq->args[0] = pin;
 	laddr[0] = cpu_to_be32((pdev->bus->number << 16) | (pdev->devfn << 8));
 	laddr[1] = laddr[2] = cpu_to_be32(0);
-	return of_irq_parse_raw(laddr, out_irq);
+	rc = of_irq_parse_raw(laddr, out_irq);
+	if (rc)
+		goto err;
+	return 0;
+err:
+	dev_err(&pdev->dev, "of_irq_parse_pci() failed with rc=%d\n", rc);
+	return rc;
 }
 EXPORT_SYMBOL_GPL(of_irq_parse_pci);
 
@@ -105,10 +113,8 @@ int of_irq_parse_and_map_pci(const struct pci_dev *dev, u8 slot, u8 pin)
 	int ret;
 
 	ret = of_irq_parse_pci(dev, &oirq);
-	if (ret) {
-		dev_err(&dev->dev, "of_irq_parse_pci() failed with rc=%d\n", ret);
+	if (ret)
 		return 0; /* Proper return code 0 == NO_IRQ */
-	}
 
 	return irq_create_of_mapping(&oirq);
 }
-- 
1.7.11.7

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

             reply	other threads:[~2015-09-09 22:57 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-09-09 22:57 David Daney [this message]
2015-09-17 19:53 ` [PATCH v3] of_pci_irq: Silence bogus "of_irq_parse_pci() failed ..." messages Rob Herring

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1441839479-19298-1-git-send-email-ddaney.cavm@gmail.com \
    --to=ddaney.cavm-re5jqeeqqe8avxtiumwx3w@public.gmane.org \
    --cc=david.daney-YGCgFSpz5w/QT0dZR+AlfA@public.gmane.org \
    --cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=frowand.list-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
    --cc=grant.likely-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
    --cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).