From mboxrd@z Thu Jan 1 00:00:00 1970 From: Charles Keepax Subject: [PATCH 3/6] extcon: arizona: Ignore jd_invert for MICD_CLAMP_STS Date: Thu, 10 Sep 2015 12:41:44 +0100 Message-ID: <1441885307-24499-3-git-send-email-ckeepax@opensource.wolfsonmicro.com> References: <1441885307-24499-1-git-send-email-ckeepax@opensource.wolfsonmicro.com> Mime-Version: 1.0 Content-Type: text/plain Return-path: In-Reply-To: <1441885307-24499-1-git-send-email-ckeepax-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org> Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: cw00.choi-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org, lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org Cc: myungjoo.ham-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org, sameo-VuQAYsv1563Yd54FQh9/CA@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, patches-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org List-Id: devicetree@vger.kernel.org From: Nariman Poushin The polarity of MICD_CLAMP_STS does not change when different clamp modes are used, this patch corrects this issue. Signed-off-by: Nariman Poushin Signed-off-by: Charles Keepax --- drivers/extcon/extcon-arizona.c | 5 +---- 1 files changed, 1 insertions(+), 4 deletions(-) diff --git a/drivers/extcon/extcon-arizona.c b/drivers/extcon/extcon-arizona.c index 7bfaacd..6d030a0 100644 --- a/drivers/extcon/extcon-arizona.c +++ b/drivers/extcon/extcon-arizona.c @@ -1059,10 +1059,7 @@ static irqreturn_t arizona_jackdet(int irq, void *data) if (arizona->pdata.jd_gpio5) { mask = ARIZONA_MICD_CLAMP_STS; - if (arizona->pdata.jd_invert) - present = ARIZONA_MICD_CLAMP_STS; - else - present = 0; + present = 0; } else { mask = ARIZONA_JD1_STS; if (arizona->pdata.jd_invert) -- 1.7.2.5 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html