From: Andreas Dannenberg <dannenberg-l0cyMroinI0@public.gmane.org>
To: Sebastian Reichel <sre-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Dmitry Eremin-Solenikov
<dbaryshkov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
David Woodhouse <dwmw2-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org>,
Laurentiu Palcu
<laurentiu.palcu-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>,
Krzysztof Kozlowski
<k.kozlowski-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
Cc: Ramakrishna Pallala
<ramakrishna.pallala-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>,
linux-pm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Andreas Dannenberg <dannenberg-l0cyMroinI0@public.gmane.org>
Subject: [PATCH v3 02/10] power: bq24257: Add basic support for bq24250/bq24251
Date: Fri, 11 Sep 2015 15:26:34 -0500 [thread overview]
Message-ID: <1442003202-1430-3-git-send-email-dannenberg@ti.com> (raw)
In-Reply-To: <1442003202-1430-1-git-send-email-dannenberg-l0cyMroinI0@public.gmane.org>
This patch adds basic support for bq24250 and bq24251 which are very
similar to the bq24257 the driver was originally written for. Basic
support means the ability to select a device through Kconfig, DT and
ACPI, an instance variable allowing to check which chip is active, and
the reporting back of the selected device through the
POWER_SUPPLY_PROP_MODEL_NAME power supply sysfs property.
This patch by itself is not sufficient to actually use those two added
devices in a real-world setting due to some feature differences which
are addressed by other patches in this series.
Signed-off-by: Andreas Dannenberg <dannenberg-l0cyMroinI0@public.gmane.org>
---
drivers/power/Kconfig | 5 +++--
drivers/power/bq24257_charger.c | 46 +++++++++++++++++++++++++++++++++++++++--
2 files changed, 47 insertions(+), 4 deletions(-)
diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
index f8758d6..7ecd9b6 100644
--- a/drivers/power/Kconfig
+++ b/drivers/power/Kconfig
@@ -397,12 +397,13 @@ config CHARGER_BQ24190
Say Y to enable support for the TI BQ24190 battery charger.
config CHARGER_BQ24257
- tristate "TI BQ24257 battery charger driver"
+ tristate "TI BQ24250/24251/24257 battery charger driver"
depends on I2C
depends on GPIOLIB || COMPILE_TEST
depends on REGMAP_I2C
help
- Say Y to enable support for the TI BQ24257 battery charger.
+ Say Y to enable support for the TI BQ24250, BQ24251, and BQ24257 battery
+ chargers.
config CHARGER_BQ24735
tristate "TI BQ24735 battery charger support"
diff --git a/drivers/power/bq24257_charger.c b/drivers/power/bq24257_charger.c
index 5859bc7..1b3ddfb 100644
--- a/drivers/power/bq24257_charger.c
+++ b/drivers/power/bq24257_charger.c
@@ -13,6 +13,10 @@
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
+ * Datasheets:
+ * http://www.ti.com/product/bq24250
+ * http://www.ti.com/product/bq24251
+ * http://www.ti.com/product/bq24257
*/
#include <linux/module.h>
@@ -41,6 +45,18 @@
#define BQ24257_ILIM_SET_DELAY 1000 /* msec */
+enum bq2425x_chip {
+ BQ24250,
+ BQ24251,
+ BQ24257,
+};
+
+static const char *const bq2425x_chip_name[] = {
+ "bq24250",
+ "bq24251",
+ "bq24257",
+};
+
enum bq24257_fields {
F_WD_FAULT, F_WD_EN, F_STAT, F_FAULT, /* REG 1 */
F_RESET, F_IILIMIT, F_EN_STAT, F_EN_TERM, F_CE, F_HZ_MODE, /* REG 2 */
@@ -71,6 +87,8 @@ struct bq24257_device {
struct device *dev;
struct power_supply *charger;
+ enum bq2425x_chip chip;
+
struct regmap *rmap;
struct regmap_field *rmap_fields[F_MAX_FIELDS];
@@ -249,6 +267,10 @@ static int bq24257_power_supply_get_property(struct power_supply *psy,
val->strval = BQ24257_MANUFACTURER;
break;
+ case POWER_SUPPLY_PROP_MODEL_NAME:
+ val->strval = bq2425x_chip_name[bq->chip];
+ break;
+
case POWER_SUPPLY_PROP_ONLINE:
val->intval = state.power_good;
break;
@@ -569,6 +591,7 @@ static int bq24257_hw_init(struct bq24257_device *bq)
static enum power_supply_property bq24257_power_supply_props[] = {
POWER_SUPPLY_PROP_MANUFACTURER,
+ POWER_SUPPLY_PROP_MODEL_NAME,
POWER_SUPPLY_PROP_STATUS,
POWER_SUPPLY_PROP_ONLINE,
POWER_SUPPLY_PROP_HEALTH,
@@ -666,6 +689,7 @@ static int bq24257_probe(struct i2c_client *client,
{
struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
struct device *dev = &client->dev;
+ const struct acpi_device_id *acpi_id;
struct bq24257_device *bq;
int ret;
int i;
@@ -682,6 +706,18 @@ static int bq24257_probe(struct i2c_client *client,
bq->client = client;
bq->dev = dev;
+ if (ACPI_HANDLE(dev)) {
+ acpi_id = acpi_match_device(dev->driver->acpi_match_table,
+ &client->dev);
+ if (!acpi_id) {
+ dev_err(dev, "Failed to match ACPI device\n");
+ return -ENODEV;
+ }
+ bq->chip = (enum bq2425x_chip)acpi_id->driver_data;
+ } else {
+ bq->chip = (enum bq2425x_chip)id->driver_data;
+ }
+
mutex_init(&bq->lock);
bq->rmap = devm_regmap_init_i2c(client, &bq24257_regmap_config);
@@ -823,19 +859,25 @@ static const struct dev_pm_ops bq24257_pm = {
};
static const struct i2c_device_id bq24257_i2c_ids[] = {
- { "bq24257", 0 },
+ { "bq24250", BQ24250 },
+ { "bq24251", BQ24251 },
+ { "bq24257", BQ24257 },
{},
};
MODULE_DEVICE_TABLE(i2c, bq24257_i2c_ids);
static const struct of_device_id bq24257_of_match[] = {
+ { .compatible = "ti,bq24250", },
+ { .compatible = "ti,bq24251", },
{ .compatible = "ti,bq24257", },
{ },
};
MODULE_DEVICE_TABLE(of, bq24257_of_match);
static const struct acpi_device_id bq24257_acpi_match[] = {
- {"BQ242570", 0},
+ { "BQ242500", BQ24250 },
+ { "BQ242510", BQ24251 },
+ { "BQ242570", BQ24257 },
{},
};
MODULE_DEVICE_TABLE(acpi, bq24257_acpi_match);
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2015-09-11 20:26 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-09-11 20:26 [PATCH v3 00/10] power: bq24257: Add support for bq24250/bq24251 Andreas Dannenberg
2015-09-11 20:26 ` [PATCH v3 01/10] dt: power: bq24257-charger: Cover additional devices Andreas Dannenberg
2015-09-14 6:11 ` Krzysztof Kozlowski
2015-09-14 13:54 ` Andreas Dannenberg
2015-09-15 7:56 ` Krzysztof Kozlowski
2015-09-15 9:05 ` Laurentiu Palcu
2015-09-15 12:51 ` Krzysztof Kozlowski
2015-09-15 13:57 ` Andreas Dannenberg
2015-09-11 20:26 ` [PATCH v3 03/10] power: bq24257: Add bit definition for temp sense enable Andreas Dannenberg
2015-09-11 20:26 ` [PATCH v3 04/10] power: bq24257: Allow manual setting of input current limit Andreas Dannenberg
2015-09-11 20:26 ` [PATCH v3 05/10] power: bq24257: Add SW-based approach for Power Good determination Andreas Dannenberg
[not found] ` <1442003202-1430-1-git-send-email-dannenberg-l0cyMroinI0@public.gmane.org>
2015-09-11 20:26 ` Andreas Dannenberg [this message]
2015-09-11 20:26 ` [PATCH v3 06/10] power: bq24257: Add over voltage protection setting support Andreas Dannenberg
2015-09-11 20:26 ` [PATCH v3 07/10] power: bq24257: Add input DPM voltage threshold " Andreas Dannenberg
2015-09-11 20:26 ` [PATCH v3 08/10] power: bq24257: Allow input current limit sysfs access Andreas Dannenberg
2015-09-11 20:26 ` [PATCH v3 09/10] power: bq24257: Add various device-specific sysfs properties Andreas Dannenberg
2015-09-11 20:26 ` [PATCH v3 10/10] power: bq24257: Add platform data based initialization Andreas Dannenberg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1442003202-1430-3-git-send-email-dannenberg@ti.com \
--to=dannenberg-l0cymroini0@public.gmane.org \
--cc=dbaryshkov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=dwmw2-wEGCiKHe2LqWVfeAwA7xHQ@public.gmane.org \
--cc=k.kozlowski-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org \
--cc=laurentiu.palcu-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org \
--cc=linux-pm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=ramakrishna.pallala-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org \
--cc=sre-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).