From mboxrd@z Thu Jan 1 00:00:00 1970 From: Sjoerd Simons Subject: Re: [PATCH 2/2] ARM: dts: rockchip: Add dtb for the Radxa Rock 2 Square board Date: Mon, 14 Sep 2015 10:05:58 +0200 Message-ID: <1442217958.8778.103.camel@collabora.co.uk> References: <1442011005-4828-1-git-send-email-sjoerd.simons@collabora.co.uk> <1442011005-4828-2-git-send-email-sjoerd.simons@collabora.co.uk> <1442215849.8778.101.camel@collabora.co.uk> Mime-Version: 1.0 Content-Type: text/plain; charset="UTF-8" Content-Transfer-Encoding: 8BIT Return-path: In-Reply-To: Sender: linux-kernel-owner@vger.kernel.org To: Javier Martinez Canillas Cc: Heiko Stuebner , Mark Rutland , "devicetree@vger.kernel.org" , Russell King , Pawel Moll , Ian Campbell , Linux Kernel , linux-rockchip@lists.infradead.org, Rob Herring , Kumar Gala , "linux-arm-kernel@lists.infradead.org" List-Id: devicetree@vger.kernel.org Hey Javier, On Mon, 2015-09-14 at 09:50 +0200, Javier Martinez Canillas wrote: > Hello Sjoerd, > > On Mon, Sep 14, 2015 at 9:30 AM, Sjoerd Simons > wrote: > > For the first patch i do prefer to keep them on so we can have get > > some > > more testing with this board before fine-tuning those things > > (fwiw, > > Ok. > > > the rockchip evb board and others with essentially the same pmic > > setup > > all also have them always-on) > > Yes but I believe that's because it was easier and there are > regulators on these boards that don't need to be always-on as well. Yes what i was trying to say is that it's not an uncommon to keep these on for convenience while fine-tuning the device-tree setups ;) -- Sjoerd Simons Collabora Ltd.