Re: [PATCH V3 1/3] arm64: dts: Add reset dts config for Hisilicon Hi6220 SoC

[Philipp Zabel <p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>]

Am Dienstag, den 15.09.2015, 11:58 +0800 schrieb Chen Feng:
> Add reset controller for hi6220 hikey-board.
> 
> Signed-off-by: Chen Feng <puck.chen-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org>
> ---
>  arch/arm64/boot/dts/hisilicon/hi6220.dtsi | 7 +++++++
>  1 file changed, 7 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
> index 3f03380..3bbc846 100644
> --- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
> +++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
> @@ -167,5 +167,12 @@
>  			clocks = <&ao_ctrl 36>, <&ao_ctrl 36>;
>  			clock-names = "uartclk", "apb_pclk";
>  		};
> +
> +		reset_ctrl: reset_ctrl@f7030000 {
> +			compatible = "hisilicon,hi6220_reset_ctl";

Check out the other compatible strings that already are in the same dtsi
file, those use hyphens instead of underscores in their compatible
values. So for consistency, this should be:

+			compatible = "hisilicon,hi6220-reset-ctl";

regards
Philipp

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html