[PATCH V3 1/3] arm64: dts: Add reset dts config for Hisilicon Hi6220 SoC

[PATCH V3 1/3] arm64: dts: Add reset dts config for Hisilicon Hi6220 SoC

[Chen Feng]

Add reset controller for hi6220 hikey-board.

Signed-off-by: Chen Feng <puck.chen-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org>
---
 arch/arm64/boot/dts/hisilicon/hi6220.dtsi | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
index 3f03380..3bbc846 100644
--- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
@@ -167,5 +167,12 @@
 			clocks = <&ao_ctrl 36>, <&ao_ctrl 36>;
 			clock-names = "uartclk", "apb_pclk";
 		};
+
+		reset_ctrl: reset_ctrl@f7030000 {
+			compatible = "hisilicon,hi6220_reset_ctl";
+			reg = <0x0 0xf7030000 0x0 0x1000>;
+			#reset-cells = <1>;
+		};
+
 	};
 };
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH V3 2/3] reset: hisilicon: document hisi-hi6220 reset controllers bindings

[Chen Feng]

Add DT bindings documentation for hi6220 SoC reset controller.

Signed-off-by: Chen Feng <puck.chen-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org>
---
 .../bindings/reset/hisilicon,hi6220-reset.txt      | 97 ++++++++++++++++++++++
 1 file changed, 97 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/reset/hisilicon,hi6220-reset.txt

diff --git a/Documentation/devicetree/bindings/reset/hisilicon,hi6220-reset.txt b/Documentation/devicetree/bindings/reset/hisilicon,hi6220-reset.txt
new file mode 100644
index 0000000..200dc8e
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/hisilicon,hi6220-reset.txt
@@ -0,0 +1,97 @@
+Hisilicon System Reset Controller
+======================================
+
+Please also refer to reset.txt in this directory for common reset
+controller binding usage.
+
+The reset controller node must be a sub-node of the chip controller
+node on SoCs.
+
+Required properties:
+- compatible: may be "hisilicon,hi6220_reset_ctl"
+- reg: should be register base and length as documented in the
+  datasheet
+- #reset-cells: 1, see below
+
+Example:
+
+	reset_ctrl: reset_ctrl@f7030000 {
+		compatible = "hisilicon,hi6220_reset_ctl";
+		reg = <0x0 0xf7030000 0x0 0x1000>;
+		#reset-cells = <1>;
+	};
+
+Specifying reset lines connected to IP modules
+==============================================
+example:
+
+        uart1: uart1@..... {
+		...
+                resets = <&reset_ctrl 0x305>;
+		...
+        };
+
+The following RESET_INDEX values are valid for hi6220 SoC:
+	PERIPH_RSTDIS0_MMC0 		= 0x000,
+	PERIPH_RSTDIS0_MMC1		= 0x001,
+	PERIPH_RSTDIS0_MMC2		= 0x002,
+	PERIPH_RSTDIS0_NANDC		= 0x003,
+	PERIPH_RSTDIS0_USBOTG_BUS	= 0x004,
+	PERIPH_RSTDIS0_POR_PICOPHY	= 0x005,
+	PERIPH_RSTDIS0_USBOTG		= 0x006,
+	PERIPH_RSTDIS0_USBOTG_32K	= 0x007,
+
+	PERIPH_RSTDIS1_HIFI		= 0x100,
+	PERIPH_RSTDIS1_DIGACODEC	= 0x105,
+
+	PERIPH_RSTEN2_IPF		= 0x200,
+	PERIPH_RSTEN2_SOCP		= 0x201,
+	PERIPH_RSTEN2_DMAC		= 0x202,
+	PERIPH_RSTEN2_SECENG		= 0x203,
+	PERIPH_RSTEN2_ABB		= 0x204,
+	PERIPH_RSTEN2_HPM0		= 0x205,
+	PERIPH_RSTEN2_HPM1		= 0x206,
+	PERIPH_RSTEN2_HPM2		= 0x207,
+	PERIPH_RSTEN2_HPM3		= 0x208,
+
+	PERIPH_RSTEN3_CSSYS		= 0x300,
+	PERIPH_RSTEN3_I2C0		= 0x301,
+	PERIPH_RSTEN3_I2C1		= 0x302,
+	PERIPH_RSTEN3_I2C2		= 0x303,
+	PERIPH_RSTEN3_I2C3		= 0x304,
+	PERIPH_RSTEN3_UART1		= 0x305,
+	PERIPH_RSTEN3_UART2		= 0x306,
+	PERIPH_RSTEN3_UART3		= 0x307,
+	PERIPH_RSTEN3_UART4		= 0x308,
+	PERIPH_RSTEN3_SSP		= 0x309,
+	PERIPH_RSTEN3_PWM		= 0x30a,
+	PERIPH_RSTEN3_BLPWM		= 0x30b,
+	PERIPH_RSTEN3_TSENSOR		= 0x30c,
+	PERIPH_RSTEN3_DAPB		= 0x312,
+	PERIPH_RSTEN3_HKADC		= 0x313,
+	PERIPH_RSTEN3_CODEC_SSI		= 0x314,
+	PERIPH_RSTEN3_PMUSSI1		= 0x316,
+
+	PERIPH_RSTEN8_RS0		= 0x400,
+	PERIPH_RSTEN8_RS2		= 0x401,
+	PERIPH_RSTEN8_RS3		= 0x402,
+	PERIPH_RSTEN8_MS0		= 0x403,
+	PERIPH_RSTEN8_MS2		= 0x405,
+	PERIPH_RSTEN8_XG2RAM0		= 0x406,
+	PERIPH_RSTEN8_X2SRAM_TZMA	= 0x407,
+	PERIPH_RSTEN8_SRAM		= 0x408,
+	PERIPH_RSTEN8_HARQ		= 0x40a,
+	PERIPH_RSTEN8_DDRC		= 0x40c,
+	PERIPH_RSTEN8_DDRC_APB		= 0x40d,
+	PERIPH_RSTEN8_DDRPACK_APB	= 0x40e,
+	PERIPH_RSTEN8_DDRT		= 0x411,
+
+	PERIPH_RSDIST9_CARM_DAP		= 0x500,
+	PERIPH_RSDIST9_CARM_ATB		= 0x501,
+	PERIPH_RSDIST9_CARM_LBUS	= 0x502,
+	PERIPH_RSDIST9_CARM_POR		= 0x503,
+	PERIPH_RSDIST9_CARM_CORE	= 0x504,
+	PERIPH_RSDIST9_CARM_DBG		= 0x505,
+	PERIPH_RSDIST9_CARM_L2		= 0x506,
+	PERIPH_RSDIST9_CARM_SOCDBG	= 0x507,
+	PERIPH_RSDIST9_CARM_ETM		= 0x508,
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH V3 3/3] reset: hi6220: Reset driver for hisilicon hi6220 SoC

[Chen Feng]

Add reset driver for hi6220-hikey board,this driver supply deassert
of IP. on hi6220 SoC.

Signed-off-by: Chen Feng <puck.chen-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org>
---
 drivers/reset/Kconfig                  |   1 +
 drivers/reset/Makefile                 |   1 +
 drivers/reset/hisilicon/Kconfig        |   5 ++
 drivers/reset/hisilicon/Makefile       |   1 +
 drivers/reset/hisilicon/hi6220_reset.c | 121 +++++++++++++++++++++++++++++++++
 5 files changed, 129 insertions(+)
 create mode 100644 drivers/reset/hisilicon/Kconfig
 create mode 100644 drivers/reset/hisilicon/Makefile
 create mode 100644 drivers/reset/hisilicon/hi6220_reset.c

diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
index 0615f50..df37212 100644
--- a/drivers/reset/Kconfig
+++ b/drivers/reset/Kconfig
@@ -13,3 +13,4 @@ menuconfig RESET_CONTROLLER
 	  If unsure, say no.
 
 source "drivers/reset/sti/Kconfig"
+source "drivers/reset/hisilicon/Kconfig"
diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile
index 157d421..331d7b2 100644
--- a/drivers/reset/Makefile
+++ b/drivers/reset/Makefile
@@ -3,3 +3,4 @@ obj-$(CONFIG_ARCH_SOCFPGA) += reset-socfpga.o
 obj-$(CONFIG_ARCH_BERLIN) += reset-berlin.o
 obj-$(CONFIG_ARCH_SUNXI) += reset-sunxi.o
 obj-$(CONFIG_ARCH_STI) += sti/
+obj-$(CONFIG_ARCH_HISI) += hisilicon/
diff --git a/drivers/reset/hisilicon/Kconfig b/drivers/reset/hisilicon/Kconfig
new file mode 100644
index 0000000..26bf95a
--- /dev/null
+++ b/drivers/reset/hisilicon/Kconfig
@@ -0,0 +1,5 @@
+config COMMON_RESET_HI6220
+	tristate "Hi6220 Reset Driver"
+	depends on (ARCH_HISI && RESET_CONTROLLER)
+	help
+	  Build the Hisilicon Hi6220 reset driver.
diff --git a/drivers/reset/hisilicon/Makefile b/drivers/reset/hisilicon/Makefile
new file mode 100644
index 0000000..c932f86
--- /dev/null
+++ b/drivers/reset/hisilicon/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_COMMON_RESET_HI6220) += hi6220_reset.o
diff --git a/drivers/reset/hisilicon/hi6220_reset.c b/drivers/reset/hisilicon/hi6220_reset.c
new file mode 100644
index 0000000..3d3de94
--- /dev/null
+++ b/drivers/reset/hisilicon/hi6220_reset.c
@@ -0,0 +1,121 @@
+/*
+ * Hisilicon Hi6220 reset controller driver
+ *
+ * Copyright (c) 2015 Hisilicon Limited.
+ *
+ * Author: Feng Chen <puck.chen-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/bitops.h>
+#include <linux/of.h>
+#include <linux/reset-controller.h>
+#include <linux/reset.h>
+#include <linux/sizes.h>
+#include <linux/platform_device.h>
+
+#define ASSET_OFFSET            0x300
+#define DEASSET_OFFSET          0x304
+
+#define to_reset_data(x) container_of(x, struct hi6220_reset_data, rc_dev)
+
+struct hi6220_reset_data {
+	spinlock_t			reset_lock; /*device spin-lock*/
+	void __iomem			*asset_base;
+	void __iomem			*deasset_base;
+	struct reset_controller_dev	rc_dev;
+};
+
+static int hi6220_reset_assert(struct reset_controller_dev *rc_dev,
+			       unsigned long idx)
+{
+	struct hi6220_reset_data *data = to_reset_data(rc_dev);
+
+	unsigned long flags;
+	int bank = idx >> 8;
+	int offset = idx & 0xff;
+
+	spin_lock_irqsave(&data->reset_lock, flags);
+
+	writel(BIT(offset), data->asset_base + (bank * 0x10));
+
+	spin_unlock_irqrestore(&data->reset_lock, flags);
+
+	return 0;
+}
+
+static int hi6220_reset_deassert(struct reset_controller_dev *rc_dev,
+				 unsigned long idx)
+{
+	struct hi6220_reset_data *data = to_reset_data(rc_dev);
+
+	unsigned long flags;
+	int bank = idx >> 8;
+	int offset = idx & 0xff;
+
+	spin_lock_irqsave(&data->reset_lock, flags);
+
+	writel(BIT(offset), data->deasset_base + (bank * 0x10));
+
+	spin_unlock_irqrestore(&data->reset_lock, flags);
+
+	return 0;
+}
+
+static struct reset_control_ops hi6220_reset_ops = {
+	.assert = hi6220_reset_assert,
+	.deassert = hi6220_reset_deassert,
+};
+
+static int hi6220_reset_probe(struct platform_device *pdev)
+{
+	struct hi6220_reset_data *data;
+	struct resource *res;
+	void __iomem *src_base;
+
+	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	src_base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(src_base))
+		return PTR_ERR(src_base);
+
+	spin_lock_init(&data->reset_lock);
+
+	data->asset_base = src_base + ASSET_OFFSET;
+	data->deasset_base = src_base + DEASSET_OFFSET;
+	data->rc_dev.nr_resets = SZ_4K;
+	data->rc_dev.ops = &hi6220_reset_ops;
+	data->rc_dev.of_node = pdev->dev.of_node;
+
+	reset_controller_register(&data->rc_dev);
+
+	return 0;
+}
+
+static const struct of_device_id hi6220_reset_match[] = {
+	{ .compatible = "hisilicon,hi6220_reset_ctl" },
+	{ },
+};
+
+static struct platform_driver hi6220_reset_driver = {
+	.probe = hi6220_reset_probe,
+	.driver = {
+		.name = "reset-hi6220",
+		.owner = THIS_MODULE,
+		.of_match_table = hi6220_reset_match,
+	},
+};
+
+static int __init hi6220_reset_init(void)
+{
+	return platform_driver_register(&hi6220_reset_driver);
+}
+
+postcore_initcall(hi6220_reset_init);
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH V3 3/3] reset: hi6220: Reset driver for hisilicon hi6220 SoC

[xuyiping]

On 2015/9/15 11:58, Chen Feng wrote:
> Add reset driver for hi6220-hikey board,this driver supply deassert
> of IP. on hi6220 SoC.
>
> Signed-off-by: Chen Feng <puck.chen-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org>
> ---
>   drivers/reset/Kconfig                  |   1 +
>   drivers/reset/Makefile                 |   1 +
>   drivers/reset/hisilicon/Kconfig        |   5 ++
>   drivers/reset/hisilicon/Makefile       |   1 +
>   drivers/reset/hisilicon/hi6220_reset.c | 121 +++++++++++++++++++++++++++++++++
>   5 files changed, 129 insertions(+)
>   create mode 100644 drivers/reset/hisilicon/Kconfig
>   create mode 100644 drivers/reset/hisilicon/Makefile
>   create mode 100644 drivers/reset/hisilicon/hi6220_reset.c
>
> diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
> index 0615f50..df37212 100644
> --- a/drivers/reset/Kconfig
> +++ b/drivers/reset/Kconfig
> @@ -13,3 +13,4 @@ menuconfig RESET_CONTROLLER
>   	  If unsure, say no.
>
>   source "drivers/reset/sti/Kconfig"
> +source "drivers/reset/hisilicon/Kconfig"
> diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile
> index 157d421..331d7b2 100644
> --- a/drivers/reset/Makefile
> +++ b/drivers/reset/Makefile
> @@ -3,3 +3,4 @@ obj-$(CONFIG_ARCH_SOCFPGA) += reset-socfpga.o
>   obj-$(CONFIG_ARCH_BERLIN) += reset-berlin.o
>   obj-$(CONFIG_ARCH_SUNXI) += reset-sunxi.o
>   obj-$(CONFIG_ARCH_STI) += sti/
> +obj-$(CONFIG_ARCH_HISI) += hisilicon/
> diff --git a/drivers/reset/hisilicon/Kconfig b/drivers/reset/hisilicon/Kconfig
> new file mode 100644
> index 0000000..26bf95a
> --- /dev/null
> +++ b/drivers/reset/hisilicon/Kconfig
> @@ -0,0 +1,5 @@
> +config COMMON_RESET_HI6220
> +	tristate "Hi6220 Reset Driver"
> +	depends on (ARCH_HISI && RESET_CONTROLLER)
> +	help
> +	  Build the Hisilicon Hi6220 reset driver.
> diff --git a/drivers/reset/hisilicon/Makefile b/drivers/reset/hisilicon/Makefile
> new file mode 100644
> index 0000000..c932f86
> --- /dev/null
> +++ b/drivers/reset/hisilicon/Makefile
> @@ -0,0 +1 @@
> +obj-$(CONFIG_COMMON_RESET_HI6220) += hi6220_reset.o
> diff --git a/drivers/reset/hisilicon/hi6220_reset.c b/drivers/reset/hisilicon/hi6220_reset.c
> new file mode 100644
> index 0000000..3d3de94
> --- /dev/null
> +++ b/drivers/reset/hisilicon/hi6220_reset.c
> @@ -0,0 +1,121 @@
> +/*
> + * Hisilicon Hi6220 reset controller driver
> + *
> + * Copyright (c) 2015 Hisilicon Limited.
> + *
> + * Author: Feng Chen <puck.chen-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include <linux/init.h>
> +#include <linux/bitops.h>
> +#include <linux/of.h>
> +#include <linux/reset-controller.h>
> +#include <linux/reset.h>
> +#include <linux/sizes.h>
> +#include <linux/platform_device.h>
> +
> +#define ASSET_OFFSET            0x300
> +#define DEASSET_OFFSET          0x304
> +
> +#define to_reset_data(x) container_of(x, struct hi6220_reset_data, rc_dev)
> +
> +struct hi6220_reset_data {
> +	spinlock_t			reset_lock; /*device spin-lock*/

	it looks useless

> +	void __iomem			*asset_base;
> +	void __iomem			*deasset_base;
> +	struct reset_controller_dev	rc_dev;
> +};
> +
> +static int hi6220_reset_assert(struct reset_controller_dev *rc_dev,
> +			       unsigned long idx)
> +{
> +	struct hi6220_reset_data *data = to_reset_data(rc_dev);
> +
> +	unsigned long flags;
> +	int bank = idx >> 8;
> +	int offset = idx & 0xff;
> +
> +	spin_lock_irqsave(&data->reset_lock, flags);
> +
> +	writel(BIT(offset), data->asset_base + (bank * 0x10));
> +
> +	spin_unlock_irqrestore(&data->reset_lock, flags);
> +
> +	return 0;
> +}
> +
> +static int hi6220_reset_deassert(struct reset_controller_dev *rc_dev,
> +				 unsigned long idx)
> +{
> +	struct hi6220_reset_data *data = to_reset_data(rc_dev);
> +
> +	unsigned long flags;
> +	int bank = idx >> 8;
> +	int offset = idx & 0xff;
> +
> +	spin_lock_irqsave(&data->reset_lock, flags);
> +
> +	writel(BIT(offset), data->deasset_base + (bank * 0x10));
> +
> +	spin_unlock_irqrestore(&data->reset_lock, flags);
> +
> +	return 0;
> +}
> +
> +static struct reset_control_ops hi6220_reset_ops = {
> +	.assert = hi6220_reset_assert,
> +	.deassert = hi6220_reset_deassert,
> +};
> +
> +static int hi6220_reset_probe(struct platform_device *pdev)
> +{
> +	struct hi6220_reset_data *data;
> +	struct resource *res;
> +	void __iomem *src_base;
> +
> +	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
> +	if (!data)
> +		return -ENOMEM;
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	src_base = devm_ioremap_resource(&pdev->dev, res);
> +	if (IS_ERR(src_base))
> +		return PTR_ERR(src_base);
> +
> +	spin_lock_init(&data->reset_lock);
> +
> +	data->asset_base = src_base + ASSET_OFFSET;
> +	data->deasset_base = src_base + DEASSET_OFFSET;
> +	data->rc_dev.nr_resets = SZ_4K;
	
	use the max index of the reset bit

> +	data->rc_dev.ops = &hi6220_reset_ops;
> +	data->rc_dev.of_node = pdev->dev.of_node;
> +
> +	reset_controller_register(&data->rc_dev);
> +
> +	return 0;
> +}
> +
> +static const struct of_device_id hi6220_reset_match[] = {
> +	{ .compatible = "hisilicon,hi6220_reset_ctl" },
> +	{ },
> +};
> +
> +static struct platform_driver hi6220_reset_driver = {
> +	.probe = hi6220_reset_probe,
> +	.driver = {
> +		.name = "reset-hi6220",
> +		.owner = THIS_MODULE,
> +		.of_match_table = hi6220_reset_match,
> +	},
> +};
> +
> +static int __init hi6220_reset_init(void)
> +{
> +	return platform_driver_register(&hi6220_reset_driver);
> +}
> +
> +postcore_initcall(hi6220_reset_init);
>

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH V3 1/3] arm64: dts: Add reset dts config for Hisilicon Hi6220 SoC

[Philipp Zabel]

Am Dienstag, den 15.09.2015, 11:58 +0800 schrieb Chen Feng:
> Add reset controller for hi6220 hikey-board.
> 
> Signed-off-by: Chen Feng <puck.chen-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org>
> ---
>  arch/arm64/boot/dts/hisilicon/hi6220.dtsi | 7 +++++++
>  1 file changed, 7 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
> index 3f03380..3bbc846 100644
> --- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
> +++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
> @@ -167,5 +167,12 @@
>  			clocks = <&ao_ctrl 36>, <&ao_ctrl 36>;
>  			clock-names = "uartclk", "apb_pclk";
>  		};
> +
> +		reset_ctrl: reset_ctrl@f7030000 {
> +			compatible = "hisilicon,hi6220_reset_ctl";

Check out the other compatible strings that already are in the same dtsi
file, those use hyphens instead of underscores in their compatible
values. So for consistency, this should be:

+			compatible = "hisilicon,hi6220-reset-ctl";

regards
Philipp

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH V3 2/3] reset: hisilicon: document hisi-hi6220 reset controllers bindings

[Philipp Zabel]

Am Dienstag, den 15.09.2015, 11:58 +0800 schrieb Chen Feng:
> Add DT bindings documentation for hi6220 SoC reset controller.
> 
> Signed-off-by: Chen Feng <puck.chen-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org>
> ---
>  .../bindings/reset/hisilicon,hi6220-reset.txt      | 97 ++++++++++++++++++++++
>  1 file changed, 97 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/reset/hisilicon,hi6220-reset.txt
> 
> diff --git a/Documentation/devicetree/bindings/reset/hisilicon,hi6220-reset.txt b/Documentation/devicetree/bindings/reset/hisilicon,hi6220-reset.txt
> new file mode 100644
> index 0000000..200dc8e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/reset/hisilicon,hi6220-reset.txt
> @@ -0,0 +1,97 @@
> +Hisilicon System Reset Controller
> +======================================
> +
> +Please also refer to reset.txt in this directory for common reset
> +controller binding usage.
> +
> +The reset controller node must be a sub-node of the chip controller
> +node on SoCs.
> +
> +Required properties:
> +- compatible: may be "hisilicon,hi6220_reset_ctl"

+- compatible: may be "hisilicon,hi6220-reset-ctl"

> +- reg: should be register base and length as documented in the
> +  datasheet
> +- #reset-cells: 1, see below
> +
> +Example:
>+
> +	reset_ctrl: reset_ctrl@f7030000 {
> +		compatible = "hisilicon,hi6220_reset_ctl";

+		compatible = "hisilicon,hi6220-reset-ctl";

regards
Philipp

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH V3 3/3] reset: hi6220: Reset driver for hisilicon hi6220 SoC

[Philipp Zabel]

Hi,

Am Dienstag, den 15.09.2015, 11:58 +0800 schrieb Chen Feng:
[...]
> diff --git a/drivers/reset/hisilicon/Kconfig b/drivers/reset/hisilicon/Kconfig
> new file mode 100644
> index 0000000..26bf95a
> --- /dev/null
> +++ b/drivers/reset/hisilicon/Kconfig
> @@ -0,0 +1,5 @@
> +config COMMON_RESET_HI6220
> +	tristate "Hi6220 Reset Driver"
> +	depends on (ARCH_HISI && RESET_CONTROLLER)
> +	help
> +	  Build the Hisilicon Hi6220 reset driver.
> diff --git a/drivers/reset/hisilicon/Makefile b/drivers/reset/hisilicon/Makefile
> new file mode 100644
> index 0000000..c932f86
> --- /dev/null
> +++ b/drivers/reset/hisilicon/Makefile
> @@ -0,0 +1 @@
> +obj-$(CONFIG_COMMON_RESET_HI6220) += hi6220_reset.o
> diff --git a/drivers/reset/hisilicon/hi6220_reset.c b/drivers/reset/hisilicon/hi6220_reset.c
> new file mode 100644
> index 0000000..3d3de94
> --- /dev/null
> +++ b/drivers/reset/hisilicon/hi6220_reset.c
> @@ -0,0 +1,121 @@
> +/*
> + * Hisilicon Hi6220 reset controller driver
> + *
> + * Copyright (c) 2015 Hisilicon Limited.
> + *
> + * Author: Feng Chen <puck.chen-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include <linux/init.h>
> +#include <linux/bitops.h>
> +#include <linux/of.h>
> +#include <linux/reset-controller.h>
> +#include <linux/reset.h>
> +#include <linux/sizes.h>
> +#include <linux/platform_device.h>
> +
> +#define ASSET_OFFSET            0x300

Typo, missing 'R':

+#define ASSERT_OFFSET            0x300

> +#define DEASSET_OFFSET          0x304

Same here:

+#define DEASSERT_OFFSET          0x304

> +#define to_reset_data(x) container_of(x, struct hi6220_reset_data, rc_dev)
> +
> +struct hi6220_reset_data {
> +	spinlock_t			reset_lock; /*device spin-lock*/
> +	void __iomem			*asset_base;
> +	void __iomem			*deasset_base;
> +	struct reset_controller_dev	rc_dev;
> +};
> +
> +static int hi6220_reset_assert(struct reset_controller_dev *rc_dev,
> +			       unsigned long idx)
> +{
> +	struct hi6220_reset_data *data = to_reset_data(rc_dev);
> +
> +	unsigned long flags;
> +	int bank = idx >> 8;
> +	int offset = idx & 0xff;
> +
> +	spin_lock_irqsave(&data->reset_lock, flags);

Not necessary, the spinlock can be removed.

> +	writel(BIT(offset), data->asset_base + (bank * 0x10));
> +
> +	spin_unlock_irqrestore(&data->reset_lock, flags);
> +	return 0;
> +}
> +
> +static int hi6220_reset_deassert(struct reset_controller_dev *rc_dev,
> +				 unsigned long idx)
> +{
> +	struct hi6220_reset_data *data = to_reset_data(rc_dev);
> +
> +	unsigned long flags;
> +	int bank = idx >> 8;
> +	int offset = idx & 0xff;
> +
> +	spin_lock_irqsave(&data->reset_lock, flags);
> +
> +	writel(BIT(offset), data->deasset_base + (bank * 0x10));
> +
> +	spin_unlock_irqrestore(&data->reset_lock, flags);
> +
> +	return 0;
> +}
> +
> +static struct reset_control_ops hi6220_reset_ops = {
> +	.assert = hi6220_reset_assert,
> +	.deassert = hi6220_reset_deassert,
> +};
> +
> +static int hi6220_reset_probe(struct platform_device *pdev)
> +{
> +	struct hi6220_reset_data *data;
> +	struct resource *res;
> +	void __iomem *src_base;
> +
> +	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
> +	if (!data)
> +		return -ENOMEM;
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	src_base = devm_ioremap_resource(&pdev->dev, res);
> +	if (IS_ERR(src_base))
> +		return PTR_ERR(src_base);
> +
> +	spin_lock_init(&data->reset_lock);
> +
> +	data->asset_base = src_base + ASSET_OFFSET;
> +	data->deasset_base = src_base + DEASSET_OFFSET;
> +	data->rc_dev.nr_resets = SZ_4K;

The default .of_xlate implementation checks if a given index value from
the device tree is smaller than this value. Just set this to the largest
valid reset index + 1, or implement .of_xlate to check that the index is
a valid bank/offset combination.

> +	data->rc_dev.ops = &hi6220_reset_ops;
> +	data->rc_dev.of_node = pdev->dev.of_node;
> +
> +	reset_controller_register(&data->rc_dev);
> +
> +	return 0;
> +}
> +
> +static const struct of_device_id hi6220_reset_match[] = {
> +	{ .compatible = "hisilicon,hi6220_reset_ctl" },

This should be:

+	{ .compatible = "hisilicon,hi6220-reset-ctl" },

> +	{ },
> +};
> +
> +static struct platform_driver hi6220_reset_driver = {
> +	.probe = hi6220_reset_probe,
> +	.driver = {
> +		.name = "reset-hi6220",
> +		.owner = THIS_MODULE,

Drop this line, .owner will be set by __platform_driver_register below.

> +		.of_match_table = hi6220_reset_match,
> +	},
> +};
> +
> +static int __init hi6220_reset_init(void)
> +{
> +	return platform_driver_register(&hi6220_reset_driver);

The platform_driver_register macro expands to
__platform_driver_register(&hi6220_reset_driver, THIS_MODULE);

regards
Philipp

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html