From: Simon Guinot <simon.guinot@sequanux.org>
To: Jacek Anaszewski <j.anaszewski@samsung.com>,
Bryan Wu <cooloney@gmail.com>, Richard Purdie <rpurdie@rpsys.net>
Cc: Jason Cooper <jason@lakedaemon.net>, Andrew Lunn <andrew@lunn.ch>,
Gregory Clement <gregory.clement@free-electrons.com>,
Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>,
Vincent Donnefort <vdonnefort@gmail.com>,
Yoann Sculo <yoann@sculo.fr>,
Linus Walleij <linus.walleij@linaro.org>,
Alexandre Courbot <gnurou@gmail.com>,
linux-leds@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
devicetree@vger.kernel.org
Subject: [PATCH v4 2/3] ARM: Kirkwood: add LED DT entries for netxbig boards
Date: Thu, 17 Sep 2015 17:59:30 +0200 [thread overview]
Message-ID: <1442505571-9744-3-git-send-email-simon.guinot@sequanux.org> (raw)
In-Reply-To: <1442505571-9744-1-git-send-email-simon.guinot@sequanux.org>
This patch adds DT entries for the LEDs found on the Kirkwood-based
LaCie boards 2Big and 5Big Network v2.
Signed-off-by: Simon Guinot <simon.guinot@sequanux.org>
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
---
arch/arm/boot/dts/kirkwood-net5big.dts | 60 +++++++++++++++++++++++++
arch/arm/boot/dts/kirkwood-netxbig.dtsi | 80 +++++++++++++++++++++++++++++++++
2 files changed, 140 insertions(+)
Changes for v4:
- Add some Acked-by.
diff --git a/arch/arm/boot/dts/kirkwood-net5big.dts b/arch/arm/boot/dts/kirkwood-net5big.dts
index 36155b749d9f..3cc5e469df06 100644
--- a/arch/arm/boot/dts/kirkwood-net5big.dts
+++ b/arch/arm/boot/dts/kirkwood-net5big.dts
@@ -86,6 +86,66 @@
clock-frequency = <32768>;
};
};
+
+ netxbig-leds {
+ blue-sata2 {
+ label = "netxbig:blue:sata2";
+ mode-addr = <5>;
+ mode-val = <NETXBIG_LED_OFF 0
+ NETXBIG_LED_ON 7
+ NETXBIG_LED_SATA 1
+ NETXBIG_LED_TIMER1 3>;
+ bright-addr = <2>;
+ bright-max = <7>;
+ };
+ red-sata2 {
+ label = "netxbig:red:sata2";
+ mode-addr = <5>;
+ mode-val = <NETXBIG_LED_OFF 0
+ NETXBIG_LED_ON 2
+ NETXBIG_LED_TIMER1 4>;
+ bright-addr = <2>;
+ bright-max = <7>;
+ };
+ blue-sata3 {
+ label = "netxbig:blue:sata3";
+ mode-addr = <6>;
+ mode-val = <NETXBIG_LED_OFF 0
+ NETXBIG_LED_ON 7
+ NETXBIG_LED_SATA 1
+ NETXBIG_LED_TIMER1 3>;
+ bright-addr = <2>;
+ bright-max = <7>;
+ };
+ red-sata3 {
+ label = "netxbig:red:sata3";
+ mode-addr = <6>;
+ mode-val = <NETXBIG_LED_OFF 0
+ NETXBIG_LED_ON 2
+ NETXBIG_LED_TIMER1 4>;
+ bright-addr = <2>;
+ bright-max = <7>;
+ };
+ blue-sata4 {
+ label = "netxbig:blue:sata4";
+ mode-addr = <7>;
+ mode-val = <NETXBIG_LED_OFF 0
+ NETXBIG_LED_ON 7
+ NETXBIG_LED_SATA 1
+ NETXBIG_LED_TIMER1 3>;
+ bright-addr = <2>;
+ bright-max = <7>;
+ };
+ red-sata4 {
+ label = "netxbig:red:sata4";
+ mode-addr = <7>;
+ mode-val = <NETXBIG_LED_OFF 0
+ NETXBIG_LED_ON 2
+ NETXBIG_LED_TIMER1 4>;
+ bright-addr = <2>;
+ bright-max = <7>;
+ };
+ };
};
&mdio {
diff --git a/arch/arm/boot/dts/kirkwood-netxbig.dtsi b/arch/arm/boot/dts/kirkwood-netxbig.dtsi
index 1508b12147df..4de5e53cd557 100644
--- a/arch/arm/boot/dts/kirkwood-netxbig.dtsi
+++ b/arch/arm/boot/dts/kirkwood-netxbig.dtsi
@@ -13,6 +13,7 @@
* warranty of any kind, whether express or implied.
*/
+#include <dt-bindings/leds/leds-netxbig.h>
#include "kirkwood.dtsi"
#include "kirkwood-6281.dtsi"
@@ -105,6 +106,85 @@
gpio = <&gpio0 16 GPIO_ACTIVE_HIGH>;
};
};
+
+ netxbig_gpio_ext: netxbig-gpio-ext {
+ compatible = "lacie,netxbig-gpio-ext";
+
+ addr-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH
+ &gpio1 16 GPIO_ACTIVE_HIGH
+ &gpio1 17 GPIO_ACTIVE_HIGH>;
+ data-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH
+ &gpio1 13 GPIO_ACTIVE_HIGH
+ &gpio1 14 GPIO_ACTIVE_HIGH>;
+ enable-gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
+ };
+
+ netxbig-leds {
+ compatible = "lacie,netxbig-leds";
+
+ gpio-ext = <&netxbig_gpio_ext>;
+
+ timers = <NETXBIG_LED_TIMER1 500 500
+ NETXBIG_LED_TIMER2 500 1000>;
+
+ blue-power {
+ label = "netxbig:blue:power";
+ mode-addr = <0>;
+ mode-val = <NETXBIG_LED_OFF 0
+ NETXBIG_LED_ON 1
+ NETXBIG_LED_TIMER1 3
+ NETXBIG_LED_TIMER2 7>;
+ bright-addr = <1>;
+ bright-max = <7>;
+ };
+ red-power {
+ label = "netxbig:red:power";
+ mode-addr = <0>;
+ mode-val = <NETXBIG_LED_OFF 0
+ NETXBIG_LED_ON 2
+ NETXBIG_LED_TIMER1 4>;
+ bright-addr = <1>;
+ bright-max = <7>;
+ };
+ blue-sata0 {
+ label = "netxbig:blue:sata0";
+ mode-addr = <3>;
+ mode-val = <NETXBIG_LED_OFF 0
+ NETXBIG_LED_ON 7
+ NETXBIG_LED_SATA 1
+ NETXBIG_LED_TIMER1 3>;
+ bright-addr = <2>;
+ bright-max = <7>;
+ };
+ red-sata0 {
+ label = "netxbig:red:sata0";
+ mode-addr = <3>;
+ mode-val = <NETXBIG_LED_OFF 0
+ NETXBIG_LED_ON 2
+ NETXBIG_LED_TIMER1 4>;
+ bright-addr = <2>;
+ bright-max = <7>;
+ };
+ blue-sata1 {
+ label = "netxbig:blue:sata1";
+ mode-addr = <4>;
+ mode-val = <NETXBIG_LED_OFF 0
+ NETXBIG_LED_ON 7
+ NETXBIG_LED_SATA 1
+ NETXBIG_LED_TIMER1 3>;
+ bright-addr = <2>;
+ bright-max = <7>;
+ };
+ red-sata1 {
+ label = "netxbig:red:sata1";
+ mode-addr = <4>;
+ mode-val = <NETXBIG_LED_OFF 0
+ NETXBIG_LED_ON 2
+ NETXBIG_LED_TIMER1 4>;
+ bright-addr = <2>;
+ bright-max = <7>;
+ };
+ };
};
&mdio {
--
2.1.4
next prev parent reply other threads:[~2015-09-17 15:59 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-09-17 15:59 [PATCH v4 0/3] Add DT support for netxbig LEDs Simon Guinot
2015-09-17 15:59 ` [PATCH v4 1/3] leds: netxbig: add device tree binding Simon Guinot
2015-09-18 9:16 ` Jacek Anaszewski
2015-09-18 10:30 ` Simon Guinot
2015-09-18 10:49 ` Jacek Anaszewski
2015-09-18 13:10 ` Simon Guinot
2015-09-21 9:10 ` Jacek Anaszewski
2015-09-21 15:38 ` Rob Herring
2015-09-22 9:30 ` Simon Guinot
2015-09-28 7:58 ` Jacek Anaszewski
2015-10-05 8:15 ` Simon Guinot
2015-09-17 15:59 ` Simon Guinot [this message]
2015-09-17 15:59 ` [PATCH v4 3/3] ARM: mvebu: remove static LED setup for netxbig boards Simon Guinot
2015-09-18 9:15 ` [PATCH v4 0/3] Add DT support for netxbig LEDs Jacek Anaszewski
2015-09-18 13:23 ` Simon Guinot
2015-09-21 9:25 ` Jacek Anaszewski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1442505571-9744-3-git-send-email-simon.guinot@sequanux.org \
--to=simon.guinot@sequanux.org \
--cc=andrew@lunn.ch \
--cc=cooloney@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=gnurou@gmail.com \
--cc=gregory.clement@free-electrons.com \
--cc=j.anaszewski@samsung.com \
--cc=jason@lakedaemon.net \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-leds@vger.kernel.org \
--cc=rpurdie@rpsys.net \
--cc=sebastian.hesselbarth@gmail.com \
--cc=vdonnefort@gmail.com \
--cc=yoann@sculo.fr \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).