From: Ray Jui <rjui@broadcom.com>
To: Florian Fainelli <f.fainelli@gmail.com>,
Rob Herring <robh+dt@kernel.org>, Arnd Bergmann <arnd@arndb.de>
Cc: Mark Rutland <mark.rutland@arm.com>,
devicetree@vger.kernel.org, Pawel Moll <pawel.moll@arm.com>,
Ian Campbell <ijc+devicetree@hellion.org.uk>,
Ray Jui <rjui@broadcom.com>,
linux-kernel@vger.kernel.org,
bcm-kernel-feedback-list@broadcom.com,
Kumar Gala <galak@codeaurora.org>,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 5/9] ARM: dts: Reorder Cygnus peripherals
Date: Mon, 21 Sep 2015 15:12:46 -0700 [thread overview]
Message-ID: <1442873570-20947-6-git-send-email-rjui@broadcom.com> (raw)
In-Reply-To: <1442873570-20947-1-git-send-email-rjui@broadcom.com>
Reorder all Cygnus peripherals based on base register addresses in
bcm-cygnus.dtsi
Signed-off-by: Ray Jui <rjui@broadcom.com>
Reviewed-by: Scott Branden <sbranden@broadcom.com>
---
arch/arm/boot/dts/bcm-cygnus.dtsi | 56 +++++++++++++++++++--------------------
1 file changed, 28 insertions(+), 28 deletions(-)
diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi
index 5ee7543..33ec6a5 100644
--- a/arch/arm/boot/dts/bcm-cygnus.dtsi
+++ b/arch/arm/boot/dts/bcm-cygnus.dtsi
@@ -108,26 +108,14 @@
gpio-controller;
};
- gpio_ccm: gpio@1800a000 {
- compatible = "brcm,cygnus-ccm-gpio";
- reg = <0x1800a000 0x50>,
- <0x0301d164 0x20>;
- #gpio-cells = <2>;
- gpio-controller;
- interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-controller;
- };
-
- gpio_asiu: gpio@180a5000 {
- compatible = "brcm,cygnus-asiu-gpio";
- reg = <0x180a5000 0x668>;
- #gpio-cells = <2>;
- gpio-controller;
-
- pinmux = <&pinctrl>;
-
- interrupt-controller;
- interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+ i2c0: i2c@18008000 {
+ compatible = "brcm,cygnus-iproc-i2c", "brcm,iproc-i2c";
+ reg = <0x18008000 0x100>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 85 IRQ_TYPE_NONE>;
+ clock-frequency = <100000>;
+ status = "disabled";
};
wdt0: wdt@18009000 {
@@ -138,14 +126,14 @@
clock-names = "apb_pclk";
};
- i2c0: i2c@18008000 {
- compatible = "brcm,cygnus-iproc-i2c", "brcm,iproc-i2c";
- reg = <0x18008000 0x100>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <GIC_SPI 85 IRQ_TYPE_NONE>;
- clock-frequency = <100000>;
- status = "disabled";
+ gpio_ccm: gpio@1800a000 {
+ compatible = "brcm,cygnus-ccm-gpio";
+ reg = <0x1800a000 0x50>,
+ <0x0301d164 0x20>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
};
i2c1: i2c@1800b000 {
@@ -257,5 +245,17 @@
brcm,nand-has-wp;
};
+
+ gpio_asiu: gpio@180a5000 {
+ compatible = "brcm,cygnus-asiu-gpio";
+ reg = <0x180a5000 0x668>;
+ #gpio-cells = <2>;
+ gpio-controller;
+
+ pinmux = <&pinctrl>;
+
+ interrupt-controller;
+ interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+ };
};
};
--
1.9.1
next prev parent reply other threads:[~2015-09-21 22:12 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-09-21 22:12 [PATCH v3 0/9] Broadcom Cygnus device tree changes Ray Jui
2015-09-21 22:12 ` [PATCH v3 2/9] ARM: dts: Use label for device nodes in Cygnus dts Ray Jui
2015-09-21 22:12 ` [PATCH v3 3/9] ARM: dts: Put Cygnus core components under core bus Ray Jui
2015-09-21 22:12 ` [PATCH v3 4/9] ARM: dts: Move all Cygnus peripherals into axi bus Ray Jui
2015-09-21 22:12 ` Ray Jui [this message]
2015-09-21 22:12 ` [PATCH v3 6/9] ARM: dts: Enable various peripherals on bcm958305k Ray Jui
2015-09-21 22:12 ` [PATCH v3 7/9] ARM: dts: Enable NAND support on bcm911360_entphn Ray Jui
[not found] ` <1442873570-20947-1-git-send-email-rjui-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
2015-09-21 22:12 ` [PATCH v3 1/9] ARM: dts: consolidate aliases for Cygnus dt files Ray Jui
2015-09-21 22:12 ` [PATCH v3 8/9] ARM: dts: enable touchscreen support on Cygnus Ray Jui
2015-09-23 0:58 ` [PATCH v3 0/9] Broadcom Cygnus device tree changes Florian Fainelli
2015-09-21 22:12 ` [PATCH v3 9/9] ARM: dts: fix Cygnus nand device node Ray Jui
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1442873570-20947-6-git-send-email-rjui@broadcom.com \
--to=rjui@broadcom.com \
--cc=arnd@arndb.de \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=devicetree@vger.kernel.org \
--cc=f.fainelli@gmail.com \
--cc=galak@codeaurora.org \
--cc=ijc+devicetree@hellion.org.uk \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=pawel.moll@arm.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).