* [PATCH v3 1/4] devicetree: bindings: Update gpio-keys-polled with support for abs/rel axis
2015-09-22 13:23 [PATCH v3 0/4] input: gpio_keys_polled: Add support for abs/rel axis Hans de Goede
@ 2015-09-22 13:23 ` Hans de Goede
2015-09-22 13:23 ` [PATCH v3 2/4] input: gpio_keys_polled: Add " Hans de Goede
` (3 subsequent siblings)
4 siblings, 0 replies; 6+ messages in thread
From: Hans de Goede @ 2015-09-22 13:23 UTC (permalink / raw)
To: Dmitry Torokhov
Cc: Maxime Ripard, linux-input, linux-arm-kernel, devicetree,
Hans de Goede
The devicetree binding for gpio-keys-polled already allows specifying
what type of events (key / rel / abs) a button generates when pressed.
But for rel / abs axis we also need to specify which value this specific
gpio represents.
One usecase is digital joysticks / direction-pads which are hooked up to
gpio, in this case we've left and right buttons which we want to map to
EV_ABS, ABS_X and we want generate events for left with a value of -1 and
for right with a value of +1 (and similar for up / down and ABS_Y).
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Rob Herring <robh@kernel.org>
---
Changes in v2:
-Add Rob's ack
-s/send/sent/
-Make the remarks of axis reporting a value of 0 when all buttons tied to
that axis are released also apply to EV_REL axis
Changes in v3:
-Document that linux,input-value is a *signed* 32 bit variable and an example
how to specify a negative value
---
Documentation/devicetree/bindings/input/gpio-keys-polled.txt | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/input/gpio-keys-polled.txt b/Documentation/devicetree/bindings/input/gpio-keys-polled.txt
index 5b91f5a..97e2467 100644
--- a/Documentation/devicetree/bindings/input/gpio-keys-polled.txt
+++ b/Documentation/devicetree/bindings/input/gpio-keys-polled.txt
@@ -13,11 +13,18 @@ Subnode properties:
- gpios: OF device-tree gpio specification.
- label: Descriptive name of the key.
- - linux,code: Keycode to emit.
+ - linux,code: Key / Axis code to emit.
Optional subnode-properties:
- linux,input-type: Specify event type this button/key generates.
If not specified defaults to <1> == EV_KEY.
+ - linux,input-value: If linux,input-type is EV_ABS or EV_REL then this
+ value is sent for events this button generates when pressed.
+ EV_ABS/EV_REL axis will generate an event with a value of 0 when
+ all buttons with linux,input-type == type and linux,code == axis
+ are released. This value is interpreted as a signed 32 bit value,
+ e.g. to make a button generate a value of -1 use:
+ linux,input-value = <0xffffffff>; /* -1 */
- debounce-interval: Debouncing interval time in milliseconds.
If not specified defaults to 5.
- wakeup-source: Boolean, button can wake-up the system.
--
2.4.3
^ permalink raw reply related [flat|nested] 6+ messages in thread* [PATCH v3 2/4] input: gpio_keys_polled: Add support for abs/rel axis
2015-09-22 13:23 [PATCH v3 0/4] input: gpio_keys_polled: Add support for abs/rel axis Hans de Goede
2015-09-22 13:23 ` [PATCH v3 1/4] devicetree: bindings: Update gpio-keys-polled with " Hans de Goede
@ 2015-09-22 13:23 ` Hans de Goede
2015-09-22 13:23 ` [PATCH v3 3/4] input: Add an input-event-codes header file Hans de Goede
` (2 subsequent siblings)
4 siblings, 0 replies; 6+ messages in thread
From: Hans de Goede @ 2015-09-22 13:23 UTC (permalink / raw)
To: Dmitry Torokhov
Cc: Maxime Ripard, linux-input, linux-arm-kernel, devicetree,
Hans de Goede
Add support for EV_ABS / EV_REL events to the gpio-keys-polled driver.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
Changes in v2:
-Fix commit message to actually describe what the patch does
(fix patch squashing fail)
---
drivers/input/keyboard/gpio_keys_polled.c | 88 +++++++++++++++++++++++++++----
1 file changed, 79 insertions(+), 9 deletions(-)
diff --git a/drivers/input/keyboard/gpio_keys_polled.c b/drivers/input/keyboard/gpio_keys_polled.c
index 870cfa6..62bdb1d 100644
--- a/drivers/input/keyboard/gpio_keys_polled.c
+++ b/drivers/input/keyboard/gpio_keys_polled.c
@@ -40,10 +40,36 @@ struct gpio_keys_polled_dev {
struct input_polled_dev *poll_dev;
struct device *dev;
const struct gpio_keys_platform_data *pdata;
+ unsigned long rel_axis_seen[BITS_TO_LONGS(REL_CNT)];
+ unsigned long abs_axis_seen[BITS_TO_LONGS(ABS_CNT)];
struct gpio_keys_button_data data[0];
};
-static void gpio_keys_polled_check_state(struct input_dev *input,
+static void gpio_keys_button_event(struct input_polled_dev *dev,
+ struct gpio_keys_button *button,
+ int state)
+{
+ struct gpio_keys_polled_dev *bdev = dev->private;
+ struct input_dev *input = dev->input;
+ unsigned int type = button->type ?: EV_KEY;
+
+ if (type == EV_REL) {
+ if (state) {
+ input_event(input, type, button->code, button->value);
+ __set_bit(button->code, bdev->rel_axis_seen);
+ }
+ } else if (type == EV_ABS) {
+ if (state) {
+ input_event(input, type, button->code, button->value);
+ __set_bit(button->code, bdev->abs_axis_seen);
+ }
+ } else {
+ input_event(input, type, button->code, state);
+ input_sync(input);
+ }
+}
+
+static void gpio_keys_polled_check_state(struct input_polled_dev *dev,
struct gpio_keys_button *button,
struct gpio_keys_button_data *bdata)
{
@@ -54,11 +80,9 @@ static void gpio_keys_polled_check_state(struct input_dev *input,
else
state = !!gpiod_get_value(button->gpiod);
- if (state != bdata->last_state) {
- unsigned int type = button->type ?: EV_KEY;
+ gpio_keys_button_event(dev, button, state);
- input_event(input, type, button->code, state);
- input_sync(input);
+ if (state != bdata->last_state) {
bdata->count = 0;
bdata->last_state = state;
}
@@ -71,15 +95,33 @@ static void gpio_keys_polled_poll(struct input_polled_dev *dev)
struct input_dev *input = dev->input;
int i;
+ memset(bdev->rel_axis_seen, 0, sizeof(bdev->rel_axis_seen));
+ memset(bdev->abs_axis_seen, 0, sizeof(bdev->abs_axis_seen));
+
for (i = 0; i < pdata->nbuttons; i++) {
struct gpio_keys_button_data *bdata = &bdev->data[i];
- if (bdata->count < bdata->threshold)
+ if (bdata->count < bdata->threshold) {
bdata->count++;
- else
- gpio_keys_polled_check_state(input, &pdata->buttons[i],
+ gpio_keys_button_event(dev, &pdata->buttons[i],
+ bdata->last_state);
+ } else {
+ gpio_keys_polled_check_state(dev, &pdata->buttons[i],
bdata);
+ }
+ }
+
+ for_each_set_bit(i, input->relbit, REL_CNT) {
+ if (!test_bit(i, bdev->rel_axis_seen))
+ input_event(input, EV_REL, i, 0);
+ }
+
+ for_each_set_bit(i, input->absbit, ABS_CNT) {
+ if (!test_bit(i, bdev->abs_axis_seen))
+ input_event(input, EV_ABS, i, 0);
}
+
+ input_sync(input);
}
static void gpio_keys_polled_open(struct input_polled_dev *dev)
@@ -152,6 +194,10 @@ static struct gpio_keys_platform_data *gpio_keys_polled_get_devtree_pdata(struct
&button->type))
button->type = EV_KEY;
+ if (fwnode_property_read_u32(child, "linux,input-value",
+ (u32 *)&button->value))
+ button->value = 1;
+
button->wakeup =
fwnode_property_read_bool(child, "wakeup-source") ||
/* legacy name */
@@ -168,6 +214,25 @@ static struct gpio_keys_platform_data *gpio_keys_polled_get_devtree_pdata(struct
return pdata;
}
+static void gpio_keys_polled_set_abs_params(struct input_dev *input,
+ const struct gpio_keys_platform_data *pdata, unsigned int code)
+{
+ int i, min = 0, max = 0;
+
+ for (i = 0; i < pdata->nbuttons; i++) {
+ struct gpio_keys_button *button = &pdata->buttons[i];
+
+ if (button->type != EV_ABS || button->code != code)
+ continue;
+
+ if (button->value < min)
+ min = button->value;
+ if (button->value > max)
+ max = button->value;
+ }
+ input_set_abs_params(input, code, min, max, 0, 0);
+}
+
static const struct of_device_id gpio_keys_polled_of_match[] = {
{ .compatible = "gpio-keys-polled", },
{ },
@@ -274,6 +339,9 @@ static int gpio_keys_polled_probe(struct platform_device *pdev)
pdata->poll_interval);
input_set_capability(input, type, button->code);
+ if (type == EV_ABS)
+ gpio_keys_polled_set_abs_params(input, pdata,
+ button->code);
}
bdev->poll_dev = poll_dev;
@@ -290,9 +358,11 @@ static int gpio_keys_polled_probe(struct platform_device *pdev)
/* report initial state of the buttons */
for (i = 0; i < pdata->nbuttons; i++)
- gpio_keys_polled_check_state(input, &pdata->buttons[i],
+ gpio_keys_polled_check_state(poll_dev, &pdata->buttons[i],
&bdev->data[i]);
+ input_sync(input);
+
return 0;
}
--
2.4.3
^ permalink raw reply related [flat|nested] 6+ messages in thread* [PATCH v3 3/4] input: Add an input-event-codes header file
2015-09-22 13:23 [PATCH v3 0/4] input: gpio_keys_polled: Add support for abs/rel axis Hans de Goede
2015-09-22 13:23 ` [PATCH v3 1/4] devicetree: bindings: Update gpio-keys-polled with " Hans de Goede
2015-09-22 13:23 ` [PATCH v3 2/4] input: gpio_keys_polled: Add " Hans de Goede
@ 2015-09-22 13:23 ` Hans de Goede
2015-09-22 13:24 ` [PATCH v3 4/4] devicetree: bindings: Use linux-event-codes.h for evdev codes Hans de Goede
2015-10-15 0:14 ` [PATCH v3 0/4] input: gpio_keys_polled: Add support for abs/rel axis Dmitry Torokhov
4 siblings, 0 replies; 6+ messages in thread
From: Hans de Goede @ 2015-09-22 13:23 UTC (permalink / raw)
To: Dmitry Torokhov
Cc: Maxime Ripard, linux-input, linux-arm-kernel, devicetree,
Hans de Goede
Add an input-event-codes header file and move all type and axis defines
there.
The purpose of this new header file is to have a single canonical source
for event-codes which can be used outside of C-code too. One example of
such usage is the use of event-codes in devicetree source files.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Rob Herring <robh@kernel.org>
---
.../uapi/linux/{input.h => input-event-codes.h} | 421 +----------
include/uapi/linux/input.h | 788 +--------------------
2 files changed, 11 insertions(+), 1198 deletions(-)
copy include/uapi/linux/{input.h => input-event-codes.h} (65%)
diff --git a/include/uapi/linux/input.h b/include/uapi/linux/input-event-codes.h
similarity index 65%
copy from include/uapi/linux/input.h
copy to include/uapi/linux/input-event-codes.h
index 731417c..87cf351 100644
--- a/include/uapi/linux/input.h
+++ b/include/uapi/linux/input-event-codes.h
@@ -1,160 +1,19 @@
/*
+ * Input event codes
+ *
+ * *** IMPORTANT ***
+ * This file is not only included from C-code but also from devicetree source
+ * files. As such this file MUST only contain comments and defines.
+ *
* Copyright (c) 1999-2002 Vojtech Pavlik
+ * Copyright (c) 2015 Hans de Goede <hdegoede@redhat.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*/
-#ifndef _UAPI_INPUT_H
-#define _UAPI_INPUT_H
-
-
-#ifndef __KERNEL__
-#include <sys/time.h>
-#include <sys/ioctl.h>
-#include <sys/types.h>
-#include <linux/types.h>
-#endif
-
-
-/*
- * The event structure itself
- */
-
-struct input_event {
- struct timeval time;
- __u16 type;
- __u16 code;
- __s32 value;
-};
-
-/*
- * Protocol version.
- */
-
-#define EV_VERSION 0x010001
-
-/*
- * IOCTLs (0x00 - 0x7f)
- */
-
-struct input_id {
- __u16 bustype;
- __u16 vendor;
- __u16 product;
- __u16 version;
-};
-
-/**
- * struct input_absinfo - used by EVIOCGABS/EVIOCSABS ioctls
- * @value: latest reported value for the axis.
- * @minimum: specifies minimum value for the axis.
- * @maximum: specifies maximum value for the axis.
- * @fuzz: specifies fuzz value that is used to filter noise from
- * the event stream.
- * @flat: values that are within this value will be discarded by
- * joydev interface and reported as 0 instead.
- * @resolution: specifies resolution for the values reported for
- * the axis.
- *
- * Note that input core does not clamp reported values to the
- * [minimum, maximum] limits, such task is left to userspace.
- *
- * Resolution for main axes (ABS_X, ABS_Y, ABS_Z) is reported in
- * units per millimeter (units/mm), resolution for rotational axes
- * (ABS_RX, ABS_RY, ABS_RZ) is reported in units per radian.
- */
-struct input_absinfo {
- __s32 value;
- __s32 minimum;
- __s32 maximum;
- __s32 fuzz;
- __s32 flat;
- __s32 resolution;
-};
-
-/**
- * struct input_keymap_entry - used by EVIOCGKEYCODE/EVIOCSKEYCODE ioctls
- * @scancode: scancode represented in machine-endian form.
- * @len: length of the scancode that resides in @scancode buffer.
- * @index: index in the keymap, may be used instead of scancode
- * @flags: allows to specify how kernel should handle the request. For
- * example, setting INPUT_KEYMAP_BY_INDEX flag indicates that kernel
- * should perform lookup in keymap by @index instead of @scancode
- * @keycode: key code assigned to this scancode
- *
- * The structure is used to retrieve and modify keymap data. Users have
- * option of performing lookup either by @scancode itself or by @index
- * in keymap entry. EVIOCGKEYCODE will also return scancode or index
- * (depending on which element was used to perform lookup).
- */
-struct input_keymap_entry {
-#define INPUT_KEYMAP_BY_INDEX (1 << 0)
- __u8 flags;
- __u8 len;
- __u16 index;
- __u32 keycode;
- __u8 scancode[32];
-};
-
-#define EVIOCGVERSION _IOR('E', 0x01, int) /* get driver version */
-#define EVIOCGID _IOR('E', 0x02, struct input_id) /* get device ID */
-#define EVIOCGREP _IOR('E', 0x03, unsigned int[2]) /* get repeat settings */
-#define EVIOCSREP _IOW('E', 0x03, unsigned int[2]) /* set repeat settings */
-
-#define EVIOCGKEYCODE _IOR('E', 0x04, unsigned int[2]) /* get keycode */
-#define EVIOCGKEYCODE_V2 _IOR('E', 0x04, struct input_keymap_entry)
-#define EVIOCSKEYCODE _IOW('E', 0x04, unsigned int[2]) /* set keycode */
-#define EVIOCSKEYCODE_V2 _IOW('E', 0x04, struct input_keymap_entry)
-
-#define EVIOCGNAME(len) _IOC(_IOC_READ, 'E', 0x06, len) /* get device name */
-#define EVIOCGPHYS(len) _IOC(_IOC_READ, 'E', 0x07, len) /* get physical location */
-#define EVIOCGUNIQ(len) _IOC(_IOC_READ, 'E', 0x08, len) /* get unique identifier */
-#define EVIOCGPROP(len) _IOC(_IOC_READ, 'E', 0x09, len) /* get device properties */
-
-/**
- * EVIOCGMTSLOTS(len) - get MT slot values
- * @len: size of the data buffer in bytes
- *
- * The ioctl buffer argument should be binary equivalent to
- *
- * struct input_mt_request_layout {
- * __u32 code;
- * __s32 values[num_slots];
- * };
- *
- * where num_slots is the (arbitrary) number of MT slots to extract.
- *
- * The ioctl size argument (len) is the size of the buffer, which
- * should satisfy len = (num_slots + 1) * sizeof(__s32). If len is
- * too small to fit all available slots, the first num_slots are
- * returned.
- *
- * Before the call, code is set to the wanted ABS_MT event type. On
- * return, values[] is filled with the slot values for the specified
- * ABS_MT code.
- *
- * If the request code is not an ABS_MT value, -EINVAL is returned.
- */
-#define EVIOCGMTSLOTS(len) _IOC(_IOC_READ, 'E', 0x0a, len)
-
-#define EVIOCGKEY(len) _IOC(_IOC_READ, 'E', 0x18, len) /* get global key state */
-#define EVIOCGLED(len) _IOC(_IOC_READ, 'E', 0x19, len) /* get all LEDs */
-#define EVIOCGSND(len) _IOC(_IOC_READ, 'E', 0x1a, len) /* get all sounds status */
-#define EVIOCGSW(len) _IOC(_IOC_READ, 'E', 0x1b, len) /* get all switch states */
-
-#define EVIOCGBIT(ev,len) _IOC(_IOC_READ, 'E', 0x20 + (ev), len) /* get event bits */
-#define EVIOCGABS(abs) _IOR('E', 0x40 + (abs), struct input_absinfo) /* get abs value/limits */
-#define EVIOCSABS(abs) _IOW('E', 0xc0 + (abs), struct input_absinfo) /* set abs value/limits */
-
-#define EVIOCSFF _IOC(_IOC_WRITE, 'E', 0x80, sizeof(struct ff_effect)) /* send a force effect to a force feedback device */
-#define EVIOCRMFF _IOW('E', 0x81, int) /* Erase a force effect */
-#define EVIOCGEFFECTS _IOR('E', 0x84, int) /* Report number of effects playable at the same time */
-
-#define EVIOCGRAB _IOW('E', 0x90, int) /* Grab/Release device */
-#define EVIOCREVOKE _IOW('E', 0x91, int) /* Revoke device access */
-
-#define EVIOCSCLOCKID _IOW('E', 0xa0, int) /* Set clockid to be used for timestamps */
+#ifndef _UAPI_INPUT_EVENT_CODES_H
+#define _UAPI_INPUT_EVENT_CODES_H
/*
* Device properties and quirks
@@ -943,264 +802,4 @@ struct input_keymap_entry {
#define SND_MAX 0x07
#define SND_CNT (SND_MAX+1)
-/*
- * IDs.
- */
-
-#define ID_BUS 0
-#define ID_VENDOR 1
-#define ID_PRODUCT 2
-#define ID_VERSION 3
-
-#define BUS_PCI 0x01
-#define BUS_ISAPNP 0x02
-#define BUS_USB 0x03
-#define BUS_HIL 0x04
-#define BUS_BLUETOOTH 0x05
-#define BUS_VIRTUAL 0x06
-
-#define BUS_ISA 0x10
-#define BUS_I8042 0x11
-#define BUS_XTKBD 0x12
-#define BUS_RS232 0x13
-#define BUS_GAMEPORT 0x14
-#define BUS_PARPORT 0x15
-#define BUS_AMIGA 0x16
-#define BUS_ADB 0x17
-#define BUS_I2C 0x18
-#define BUS_HOST 0x19
-#define BUS_GSC 0x1A
-#define BUS_ATARI 0x1B
-#define BUS_SPI 0x1C
-
-/*
- * MT_TOOL types
- */
-#define MT_TOOL_FINGER 0
-#define MT_TOOL_PEN 1
-#define MT_TOOL_PALM 2
-#define MT_TOOL_MAX 2
-
-/*
- * Values describing the status of a force-feedback effect
- */
-#define FF_STATUS_STOPPED 0x00
-#define FF_STATUS_PLAYING 0x01
-#define FF_STATUS_MAX 0x01
-
-/*
- * Structures used in ioctls to upload effects to a device
- * They are pieces of a bigger structure (called ff_effect)
- */
-
-/*
- * All duration values are expressed in ms. Values above 32767 ms (0x7fff)
- * should not be used and have unspecified results.
- */
-
-/**
- * struct ff_replay - defines scheduling of the force-feedback effect
- * @length: duration of the effect
- * @delay: delay before effect should start playing
- */
-struct ff_replay {
- __u16 length;
- __u16 delay;
-};
-
-/**
- * struct ff_trigger - defines what triggers the force-feedback effect
- * @button: number of the button triggering the effect
- * @interval: controls how soon the effect can be re-triggered
- */
-struct ff_trigger {
- __u16 button;
- __u16 interval;
-};
-
-/**
- * struct ff_envelope - generic force-feedback effect envelope
- * @attack_length: duration of the attack (ms)
- * @attack_level: level at the beginning of the attack
- * @fade_length: duration of fade (ms)
- * @fade_level: level at the end of fade
- *
- * The @attack_level and @fade_level are absolute values; when applying
- * envelope force-feedback core will convert to positive/negative
- * value based on polarity of the default level of the effect.
- * Valid range for the attack and fade levels is 0x0000 - 0x7fff
- */
-struct ff_envelope {
- __u16 attack_length;
- __u16 attack_level;
- __u16 fade_length;
- __u16 fade_level;
-};
-
-/**
- * struct ff_constant_effect - defines parameters of a constant force-feedback effect
- * @level: strength of the effect; may be negative
- * @envelope: envelope data
- */
-struct ff_constant_effect {
- __s16 level;
- struct ff_envelope envelope;
-};
-
-/**
- * struct ff_ramp_effect - defines parameters of a ramp force-feedback effect
- * @start_level: beginning strength of the effect; may be negative
- * @end_level: final strength of the effect; may be negative
- * @envelope: envelope data
- */
-struct ff_ramp_effect {
- __s16 start_level;
- __s16 end_level;
- struct ff_envelope envelope;
-};
-
-/**
- * struct ff_condition_effect - defines a spring or friction force-feedback effect
- * @right_saturation: maximum level when joystick moved all way to the right
- * @left_saturation: same for the left side
- * @right_coeff: controls how fast the force grows when the joystick moves
- * to the right
- * @left_coeff: same for the left side
- * @deadband: size of the dead zone, where no force is produced
- * @center: position of the dead zone
- */
-struct ff_condition_effect {
- __u16 right_saturation;
- __u16 left_saturation;
-
- __s16 right_coeff;
- __s16 left_coeff;
-
- __u16 deadband;
- __s16 center;
-};
-
-/**
- * struct ff_periodic_effect - defines parameters of a periodic force-feedback effect
- * @waveform: kind of the effect (wave)
- * @period: period of the wave (ms)
- * @magnitude: peak value
- * @offset: mean value of the wave (roughly)
- * @phase: 'horizontal' shift
- * @envelope: envelope data
- * @custom_len: number of samples (FF_CUSTOM only)
- * @custom_data: buffer of samples (FF_CUSTOM only)
- *
- * Known waveforms - FF_SQUARE, FF_TRIANGLE, FF_SINE, FF_SAW_UP,
- * FF_SAW_DOWN, FF_CUSTOM. The exact syntax FF_CUSTOM is undefined
- * for the time being as no driver supports it yet.
- *
- * Note: the data pointed by custom_data is copied by the driver.
- * You can therefore dispose of the memory after the upload/update.
- */
-struct ff_periodic_effect {
- __u16 waveform;
- __u16 period;
- __s16 magnitude;
- __s16 offset;
- __u16 phase;
-
- struct ff_envelope envelope;
-
- __u32 custom_len;
- __s16 __user *custom_data;
-};
-
-/**
- * struct ff_rumble_effect - defines parameters of a periodic force-feedback effect
- * @strong_magnitude: magnitude of the heavy motor
- * @weak_magnitude: magnitude of the light one
- *
- * Some rumble pads have two motors of different weight. Strong_magnitude
- * represents the magnitude of the vibration generated by the heavy one.
- */
-struct ff_rumble_effect {
- __u16 strong_magnitude;
- __u16 weak_magnitude;
-};
-
-/**
- * struct ff_effect - defines force feedback effect
- * @type: type of the effect (FF_CONSTANT, FF_PERIODIC, FF_RAMP, FF_SPRING,
- * FF_FRICTION, FF_DAMPER, FF_RUMBLE, FF_INERTIA, or FF_CUSTOM)
- * @id: an unique id assigned to an effect
- * @direction: direction of the effect
- * @trigger: trigger conditions (struct ff_trigger)
- * @replay: scheduling of the effect (struct ff_replay)
- * @u: effect-specific structure (one of ff_constant_effect, ff_ramp_effect,
- * ff_periodic_effect, ff_condition_effect, ff_rumble_effect) further
- * defining effect parameters
- *
- * This structure is sent through ioctl from the application to the driver.
- * To create a new effect application should set its @id to -1; the kernel
- * will return assigned @id which can later be used to update or delete
- * this effect.
- *
- * Direction of the effect is encoded as follows:
- * 0 deg -> 0x0000 (down)
- * 90 deg -> 0x4000 (left)
- * 180 deg -> 0x8000 (up)
- * 270 deg -> 0xC000 (right)
- */
-struct ff_effect {
- __u16 type;
- __s16 id;
- __u16 direction;
- struct ff_trigger trigger;
- struct ff_replay replay;
-
- union {
- struct ff_constant_effect constant;
- struct ff_ramp_effect ramp;
- struct ff_periodic_effect periodic;
- struct ff_condition_effect condition[2]; /* One for each axis */
- struct ff_rumble_effect rumble;
- } u;
-};
-
-/*
- * Force feedback effect types
- */
-
-#define FF_RUMBLE 0x50
-#define FF_PERIODIC 0x51
-#define FF_CONSTANT 0x52
-#define FF_SPRING 0x53
-#define FF_FRICTION 0x54
-#define FF_DAMPER 0x55
-#define FF_INERTIA 0x56
-#define FF_RAMP 0x57
-
-#define FF_EFFECT_MIN FF_RUMBLE
-#define FF_EFFECT_MAX FF_RAMP
-
-/*
- * Force feedback periodic effect types
- */
-
-#define FF_SQUARE 0x58
-#define FF_TRIANGLE 0x59
-#define FF_SINE 0x5a
-#define FF_SAW_UP 0x5b
-#define FF_SAW_DOWN 0x5c
-#define FF_CUSTOM 0x5d
-
-#define FF_WAVEFORM_MIN FF_SQUARE
-#define FF_WAVEFORM_MAX FF_CUSTOM
-
-/*
- * Set ff device properties
- */
-
-#define FF_GAIN 0x60
-#define FF_AUTOCENTER 0x61
-
-#define FF_MAX 0x7f
-#define FF_CNT (FF_MAX+1)
-
-#endif /* _UAPI_INPUT_H */
+#endif
diff --git a/include/uapi/linux/input.h b/include/uapi/linux/input.h
index 731417c..f24043a 100644
--- a/include/uapi/linux/input.h
+++ b/include/uapi/linux/input.h
@@ -16,6 +16,7 @@
#include <linux/types.h>
#endif
+#include "input-event-codes.h"
/*
* The event structure itself
@@ -157,793 +158,6 @@ struct input_keymap_entry {
#define EVIOCSCLOCKID _IOW('E', 0xa0, int) /* Set clockid to be used for timestamps */
/*
- * Device properties and quirks
- */
-
-#define INPUT_PROP_POINTER 0x00 /* needs a pointer */
-#define INPUT_PROP_DIRECT 0x01 /* direct input devices */
-#define INPUT_PROP_BUTTONPAD 0x02 /* has button(s) under pad */
-#define INPUT_PROP_SEMI_MT 0x03 /* touch rectangle only */
-#define INPUT_PROP_TOPBUTTONPAD 0x04 /* softbuttons at top of pad */
-#define INPUT_PROP_POINTING_STICK 0x05 /* is a pointing stick */
-#define INPUT_PROP_ACCELEROMETER 0x06 /* has accelerometer */
-
-#define INPUT_PROP_MAX 0x1f
-#define INPUT_PROP_CNT (INPUT_PROP_MAX + 1)
-
-/*
- * Event types
- */
-
-#define EV_SYN 0x00
-#define EV_KEY 0x01
-#define EV_REL 0x02
-#define EV_ABS 0x03
-#define EV_MSC 0x04
-#define EV_SW 0x05
-#define EV_LED 0x11
-#define EV_SND 0x12
-#define EV_REP 0x14
-#define EV_FF 0x15
-#define EV_PWR 0x16
-#define EV_FF_STATUS 0x17
-#define EV_MAX 0x1f
-#define EV_CNT (EV_MAX+1)
-
-/*
- * Synchronization events.
- */
-
-#define SYN_REPORT 0
-#define SYN_CONFIG 1
-#define SYN_MT_REPORT 2
-#define SYN_DROPPED 3
-#define SYN_MAX 0xf
-#define SYN_CNT (SYN_MAX+1)
-
-/*
- * Keys and buttons
- *
- * Most of the keys/buttons are modeled after USB HUT 1.12
- * (see http://www.usb.org/developers/hidpage).
- * Abbreviations in the comments:
- * AC - Application Control
- * AL - Application Launch Button
- * SC - System Control
- */
-
-#define KEY_RESERVED 0
-#define KEY_ESC 1
-#define KEY_1 2
-#define KEY_2 3
-#define KEY_3 4
-#define KEY_4 5
-#define KEY_5 6
-#define KEY_6 7
-#define KEY_7 8
-#define KEY_8 9
-#define KEY_9 10
-#define KEY_0 11
-#define KEY_MINUS 12
-#define KEY_EQUAL 13
-#define KEY_BACKSPACE 14
-#define KEY_TAB 15
-#define KEY_Q 16
-#define KEY_W 17
-#define KEY_E 18
-#define KEY_R 19
-#define KEY_T 20
-#define KEY_Y 21
-#define KEY_U 22
-#define KEY_I 23
-#define KEY_O 24
-#define KEY_P 25
-#define KEY_LEFTBRACE 26
-#define KEY_RIGHTBRACE 27
-#define KEY_ENTER 28
-#define KEY_LEFTCTRL 29
-#define KEY_A 30
-#define KEY_S 31
-#define KEY_D 32
-#define KEY_F 33
-#define KEY_G 34
-#define KEY_H 35
-#define KEY_J 36
-#define KEY_K 37
-#define KEY_L 38
-#define KEY_SEMICOLON 39
-#define KEY_APOSTROPHE 40
-#define KEY_GRAVE 41
-#define KEY_LEFTSHIFT 42
-#define KEY_BACKSLASH 43
-#define KEY_Z 44
-#define KEY_X 45
-#define KEY_C 46
-#define KEY_V 47
-#define KEY_B 48
-#define KEY_N 49
-#define KEY_M 50
-#define KEY_COMMA 51
-#define KEY_DOT 52
-#define KEY_SLASH 53
-#define KEY_RIGHTSHIFT 54
-#define KEY_KPASTERISK 55
-#define KEY_LEFTALT 56
-#define KEY_SPACE 57
-#define KEY_CAPSLOCK 58
-#define KEY_F1 59
-#define KEY_F2 60
-#define KEY_F3 61
-#define KEY_F4 62
-#define KEY_F5 63
-#define KEY_F6 64
-#define KEY_F7 65
-#define KEY_F8 66
-#define KEY_F9 67
-#define KEY_F10 68
-#define KEY_NUMLOCK 69
-#define KEY_SCROLLLOCK 70
-#define KEY_KP7 71
-#define KEY_KP8 72
-#define KEY_KP9 73
-#define KEY_KPMINUS 74
-#define KEY_KP4 75
-#define KEY_KP5 76
-#define KEY_KP6 77
-#define KEY_KPPLUS 78
-#define KEY_KP1 79
-#define KEY_KP2 80
-#define KEY_KP3 81
-#define KEY_KP0 82
-#define KEY_KPDOT 83
-
-#define KEY_ZENKAKUHANKAKU 85
-#define KEY_102ND 86
-#define KEY_F11 87
-#define KEY_F12 88
-#define KEY_RO 89
-#define KEY_KATAKANA 90
-#define KEY_HIRAGANA 91
-#define KEY_HENKAN 92
-#define KEY_KATAKANAHIRAGANA 93
-#define KEY_MUHENKAN 94
-#define KEY_KPJPCOMMA 95
-#define KEY_KPENTER 96
-#define KEY_RIGHTCTRL 97
-#define KEY_KPSLASH 98
-#define KEY_SYSRQ 99
-#define KEY_RIGHTALT 100
-#define KEY_LINEFEED 101
-#define KEY_HOME 102
-#define KEY_UP 103
-#define KEY_PAGEUP 104
-#define KEY_LEFT 105
-#define KEY_RIGHT 106
-#define KEY_END 107
-#define KEY_DOWN 108
-#define KEY_PAGEDOWN 109
-#define KEY_INSERT 110
-#define KEY_DELETE 111
-#define KEY_MACRO 112
-#define KEY_MUTE 113
-#define KEY_VOLUMEDOWN 114
-#define KEY_VOLUMEUP 115
-#define KEY_POWER 116 /* SC System Power Down */
-#define KEY_KPEQUAL 117
-#define KEY_KPPLUSMINUS 118
-#define KEY_PAUSE 119
-#define KEY_SCALE 120 /* AL Compiz Scale (Expose) */
-
-#define KEY_KPCOMMA 121
-#define KEY_HANGEUL 122
-#define KEY_HANGUEL KEY_HANGEUL
-#define KEY_HANJA 123
-#define KEY_YEN 124
-#define KEY_LEFTMETA 125
-#define KEY_RIGHTMETA 126
-#define KEY_COMPOSE 127
-
-#define KEY_STOP 128 /* AC Stop */
-#define KEY_AGAIN 129
-#define KEY_PROPS 130 /* AC Properties */
-#define KEY_UNDO 131 /* AC Undo */
-#define KEY_FRONT 132
-#define KEY_COPY 133 /* AC Copy */
-#define KEY_OPEN 134 /* AC Open */
-#define KEY_PASTE 135 /* AC Paste */
-#define KEY_FIND 136 /* AC Search */
-#define KEY_CUT 137 /* AC Cut */
-#define KEY_HELP 138 /* AL Integrated Help Center */
-#define KEY_MENU 139 /* Menu (show menu) */
-#define KEY_CALC 140 /* AL Calculator */
-#define KEY_SETUP 141
-#define KEY_SLEEP 142 /* SC System Sleep */
-#define KEY_WAKEUP 143 /* System Wake Up */
-#define KEY_FILE 144 /* AL Local Machine Browser */
-#define KEY_SENDFILE 145
-#define KEY_DELETEFILE 146
-#define KEY_XFER 147
-#define KEY_PROG1 148
-#define KEY_PROG2 149
-#define KEY_WWW 150 /* AL Internet Browser */
-#define KEY_MSDOS 151
-#define KEY_COFFEE 152 /* AL Terminal Lock/Screensaver */
-#define KEY_SCREENLOCK KEY_COFFEE
-#define KEY_ROTATE_DISPLAY 153 /* Display orientation for e.g. tablets */
-#define KEY_DIRECTION KEY_ROTATE_DISPLAY
-#define KEY_CYCLEWINDOWS 154
-#define KEY_MAIL 155
-#define KEY_BOOKMARKS 156 /* AC Bookmarks */
-#define KEY_COMPUTER 157
-#define KEY_BACK 158 /* AC Back */
-#define KEY_FORWARD 159 /* AC Forward */
-#define KEY_CLOSECD 160
-#define KEY_EJECTCD 161
-#define KEY_EJECTCLOSECD 162
-#define KEY_NEXTSONG 163
-#define KEY_PLAYPAUSE 164
-#define KEY_PREVIOUSSONG 165
-#define KEY_STOPCD 166
-#define KEY_RECORD 167
-#define KEY_REWIND 168
-#define KEY_PHONE 169 /* Media Select Telephone */
-#define KEY_ISO 170
-#define KEY_CONFIG 171 /* AL Consumer Control Configuration */
-#define KEY_HOMEPAGE 172 /* AC Home */
-#define KEY_REFRESH 173 /* AC Refresh */
-#define KEY_EXIT 174 /* AC Exit */
-#define KEY_MOVE 175
-#define KEY_EDIT 176
-#define KEY_SCROLLUP 177
-#define KEY_SCROLLDOWN 178
-#define KEY_KPLEFTPAREN 179
-#define KEY_KPRIGHTPAREN 180
-#define KEY_NEW 181 /* AC New */
-#define KEY_REDO 182 /* AC Redo/Repeat */
-
-#define KEY_F13 183
-#define KEY_F14 184
-#define KEY_F15 185
-#define KEY_F16 186
-#define KEY_F17 187
-#define KEY_F18 188
-#define KEY_F19 189
-#define KEY_F20 190
-#define KEY_F21 191
-#define KEY_F22 192
-#define KEY_F23 193
-#define KEY_F24 194
-
-#define KEY_PLAYCD 200
-#define KEY_PAUSECD 201
-#define KEY_PROG3 202
-#define KEY_PROG4 203
-#define KEY_DASHBOARD 204 /* AL Dashboard */
-#define KEY_SUSPEND 205
-#define KEY_CLOSE 206 /* AC Close */
-#define KEY_PLAY 207
-#define KEY_FASTFORWARD 208
-#define KEY_BASSBOOST 209
-#define KEY_PRINT 210 /* AC Print */
-#define KEY_HP 211
-#define KEY_CAMERA 212
-#define KEY_SOUND 213
-#define KEY_QUESTION 214
-#define KEY_EMAIL 215
-#define KEY_CHAT 216
-#define KEY_SEARCH 217
-#define KEY_CONNECT 218
-#define KEY_FINANCE 219 /* AL Checkbook/Finance */
-#define KEY_SPORT 220
-#define KEY_SHOP 221
-#define KEY_ALTERASE 222
-#define KEY_CANCEL 223 /* AC Cancel */
-#define KEY_BRIGHTNESSDOWN 224
-#define KEY_BRIGHTNESSUP 225
-#define KEY_MEDIA 226
-
-#define KEY_SWITCHVIDEOMODE 227 /* Cycle between available video
- outputs (Monitor/LCD/TV-out/etc) */
-#define KEY_KBDILLUMTOGGLE 228
-#define KEY_KBDILLUMDOWN 229
-#define KEY_KBDILLUMUP 230
-
-#define KEY_SEND 231 /* AC Send */
-#define KEY_REPLY 232 /* AC Reply */
-#define KEY_FORWARDMAIL 233 /* AC Forward Msg */
-#define KEY_SAVE 234 /* AC Save */
-#define KEY_DOCUMENTS 235
-
-#define KEY_BATTERY 236
-
-#define KEY_BLUETOOTH 237
-#define KEY_WLAN 238
-#define KEY_UWB 239
-
-#define KEY_UNKNOWN 240
-
-#define KEY_VIDEO_NEXT 241 /* drive next video source */
-#define KEY_VIDEO_PREV 242 /* drive previous video source */
-#define KEY_BRIGHTNESS_CYCLE 243 /* brightness up, after max is min */
-#define KEY_BRIGHTNESS_AUTO 244 /* Set Auto Brightness: manual
- brightness control is off,
- rely on ambient */
-#define KEY_BRIGHTNESS_ZERO KEY_BRIGHTNESS_AUTO
-#define KEY_DISPLAY_OFF 245 /* display device to off state */
-
-#define KEY_WWAN 246 /* Wireless WAN (LTE, UMTS, GSM, etc.) */
-#define KEY_WIMAX KEY_WWAN
-#define KEY_RFKILL 247 /* Key that controls all radios */
-
-#define KEY_MICMUTE 248 /* Mute / unmute the microphone */
-
-/* Code 255 is reserved for special needs of AT keyboard driver */
-
-#define BTN_MISC 0x100
-#define BTN_0 0x100
-#define BTN_1 0x101
-#define BTN_2 0x102
-#define BTN_3 0x103
-#define BTN_4 0x104
-#define BTN_5 0x105
-#define BTN_6 0x106
-#define BTN_7 0x107
-#define BTN_8 0x108
-#define BTN_9 0x109
-
-#define BTN_MOUSE 0x110
-#define BTN_LEFT 0x110
-#define BTN_RIGHT 0x111
-#define BTN_MIDDLE 0x112
-#define BTN_SIDE 0x113
-#define BTN_EXTRA 0x114
-#define BTN_FORWARD 0x115
-#define BTN_BACK 0x116
-#define BTN_TASK 0x117
-
-#define BTN_JOYSTICK 0x120
-#define BTN_TRIGGER 0x120
-#define BTN_THUMB 0x121
-#define BTN_THUMB2 0x122
-#define BTN_TOP 0x123
-#define BTN_TOP2 0x124
-#define BTN_PINKIE 0x125
-#define BTN_BASE 0x126
-#define BTN_BASE2 0x127
-#define BTN_BASE3 0x128
-#define BTN_BASE4 0x129
-#define BTN_BASE5 0x12a
-#define BTN_BASE6 0x12b
-#define BTN_DEAD 0x12f
-
-#define BTN_GAMEPAD 0x130
-#define BTN_SOUTH 0x130
-#define BTN_A BTN_SOUTH
-#define BTN_EAST 0x131
-#define BTN_B BTN_EAST
-#define BTN_C 0x132
-#define BTN_NORTH 0x133
-#define BTN_X BTN_NORTH
-#define BTN_WEST 0x134
-#define BTN_Y BTN_WEST
-#define BTN_Z 0x135
-#define BTN_TL 0x136
-#define BTN_TR 0x137
-#define BTN_TL2 0x138
-#define BTN_TR2 0x139
-#define BTN_SELECT 0x13a
-#define BTN_START 0x13b
-#define BTN_MODE 0x13c
-#define BTN_THUMBL 0x13d
-#define BTN_THUMBR 0x13e
-
-#define BTN_DIGI 0x140
-#define BTN_TOOL_PEN 0x140
-#define BTN_TOOL_RUBBER 0x141
-#define BTN_TOOL_BRUSH 0x142
-#define BTN_TOOL_PENCIL 0x143
-#define BTN_TOOL_AIRBRUSH 0x144
-#define BTN_TOOL_FINGER 0x145
-#define BTN_TOOL_MOUSE 0x146
-#define BTN_TOOL_LENS 0x147
-#define BTN_TOOL_QUINTTAP 0x148 /* Five fingers on trackpad */
-#define BTN_TOUCH 0x14a
-#define BTN_STYLUS 0x14b
-#define BTN_STYLUS2 0x14c
-#define BTN_TOOL_DOUBLETAP 0x14d
-#define BTN_TOOL_TRIPLETAP 0x14e
-#define BTN_TOOL_QUADTAP 0x14f /* Four fingers on trackpad */
-
-#define BTN_WHEEL 0x150
-#define BTN_GEAR_DOWN 0x150
-#define BTN_GEAR_UP 0x151
-
-#define KEY_OK 0x160
-#define KEY_SELECT 0x161
-#define KEY_GOTO 0x162
-#define KEY_CLEAR 0x163
-#define KEY_POWER2 0x164
-#define KEY_OPTION 0x165
-#define KEY_INFO 0x166 /* AL OEM Features/Tips/Tutorial */
-#define KEY_TIME 0x167
-#define KEY_VENDOR 0x168
-#define KEY_ARCHIVE 0x169
-#define KEY_PROGRAM 0x16a /* Media Select Program Guide */
-#define KEY_CHANNEL 0x16b
-#define KEY_FAVORITES 0x16c
-#define KEY_EPG 0x16d
-#define KEY_PVR 0x16e /* Media Select Home */
-#define KEY_MHP 0x16f
-#define KEY_LANGUAGE 0x170
-#define KEY_TITLE 0x171
-#define KEY_SUBTITLE 0x172
-#define KEY_ANGLE 0x173
-#define KEY_ZOOM 0x174
-#define KEY_MODE 0x175
-#define KEY_KEYBOARD 0x176
-#define KEY_SCREEN 0x177
-#define KEY_PC 0x178 /* Media Select Computer */
-#define KEY_TV 0x179 /* Media Select TV */
-#define KEY_TV2 0x17a /* Media Select Cable */
-#define KEY_VCR 0x17b /* Media Select VCR */
-#define KEY_VCR2 0x17c /* VCR Plus */
-#define KEY_SAT 0x17d /* Media Select Satellite */
-#define KEY_SAT2 0x17e
-#define KEY_CD 0x17f /* Media Select CD */
-#define KEY_TAPE 0x180 /* Media Select Tape */
-#define KEY_RADIO 0x181
-#define KEY_TUNER 0x182 /* Media Select Tuner */
-#define KEY_PLAYER 0x183
-#define KEY_TEXT 0x184
-#define KEY_DVD 0x185 /* Media Select DVD */
-#define KEY_AUX 0x186
-#define KEY_MP3 0x187
-#define KEY_AUDIO 0x188 /* AL Audio Browser */
-#define KEY_VIDEO 0x189 /* AL Movie Browser */
-#define KEY_DIRECTORY 0x18a
-#define KEY_LIST 0x18b
-#define KEY_MEMO 0x18c /* Media Select Messages */
-#define KEY_CALENDAR 0x18d
-#define KEY_RED 0x18e
-#define KEY_GREEN 0x18f
-#define KEY_YELLOW 0x190
-#define KEY_BLUE 0x191
-#define KEY_CHANNELUP 0x192 /* Channel Increment */
-#define KEY_CHANNELDOWN 0x193 /* Channel Decrement */
-#define KEY_FIRST 0x194
-#define KEY_LAST 0x195 /* Recall Last */
-#define KEY_AB 0x196
-#define KEY_NEXT 0x197
-#define KEY_RESTART 0x198
-#define KEY_SLOW 0x199
-#define KEY_SHUFFLE 0x19a
-#define KEY_BREAK 0x19b
-#define KEY_PREVIOUS 0x19c
-#define KEY_DIGITS 0x19d
-#define KEY_TEEN 0x19e
-#define KEY_TWEN 0x19f
-#define KEY_VIDEOPHONE 0x1a0 /* Media Select Video Phone */
-#define KEY_GAMES 0x1a1 /* Media Select Games */
-#define KEY_ZOOMIN 0x1a2 /* AC Zoom In */
-#define KEY_ZOOMOUT 0x1a3 /* AC Zoom Out */
-#define KEY_ZOOMRESET 0x1a4 /* AC Zoom */
-#define KEY_WORDPROCESSOR 0x1a5 /* AL Word Processor */
-#define KEY_EDITOR 0x1a6 /* AL Text Editor */
-#define KEY_SPREADSHEET 0x1a7 /* AL Spreadsheet */
-#define KEY_GRAPHICSEDITOR 0x1a8 /* AL Graphics Editor */
-#define KEY_PRESENTATION 0x1a9 /* AL Presentation App */
-#define KEY_DATABASE 0x1aa /* AL Database App */
-#define KEY_NEWS 0x1ab /* AL Newsreader */
-#define KEY_VOICEMAIL 0x1ac /* AL Voicemail */
-#define KEY_ADDRESSBOOK 0x1ad /* AL Contacts/Address Book */
-#define KEY_MESSENGER 0x1ae /* AL Instant Messaging */
-#define KEY_DISPLAYTOGGLE 0x1af /* Turn display (LCD) on and off */
-#define KEY_BRIGHTNESS_TOGGLE KEY_DISPLAYTOGGLE
-#define KEY_SPELLCHECK 0x1b0 /* AL Spell Check */
-#define KEY_LOGOFF 0x1b1 /* AL Logoff */
-
-#define KEY_DOLLAR 0x1b2
-#define KEY_EURO 0x1b3
-
-#define KEY_FRAMEBACK 0x1b4 /* Consumer - transport controls */
-#define KEY_FRAMEFORWARD 0x1b5
-#define KEY_CONTEXT_MENU 0x1b6 /* GenDesc - system context menu */
-#define KEY_MEDIA_REPEAT 0x1b7 /* Consumer - transport control */
-#define KEY_10CHANNELSUP 0x1b8 /* 10 channels up (10+) */
-#define KEY_10CHANNELSDOWN 0x1b9 /* 10 channels down (10-) */
-#define KEY_IMAGES 0x1ba /* AL Image Browser */
-
-#define KEY_DEL_EOL 0x1c0
-#define KEY_DEL_EOS 0x1c1
-#define KEY_INS_LINE 0x1c2
-#define KEY_DEL_LINE 0x1c3
-
-#define KEY_FN 0x1d0
-#define KEY_FN_ESC 0x1d1
-#define KEY_FN_F1 0x1d2
-#define KEY_FN_F2 0x1d3
-#define KEY_FN_F3 0x1d4
-#define KEY_FN_F4 0x1d5
-#define KEY_FN_F5 0x1d6
-#define KEY_FN_F6 0x1d7
-#define KEY_FN_F7 0x1d8
-#define KEY_FN_F8 0x1d9
-#define KEY_FN_F9 0x1da
-#define KEY_FN_F10 0x1db
-#define KEY_FN_F11 0x1dc
-#define KEY_FN_F12 0x1dd
-#define KEY_FN_1 0x1de
-#define KEY_FN_2 0x1df
-#define KEY_FN_D 0x1e0
-#define KEY_FN_E 0x1e1
-#define KEY_FN_F 0x1e2
-#define KEY_FN_S 0x1e3
-#define KEY_FN_B 0x1e4
-
-#define KEY_BRL_DOT1 0x1f1
-#define KEY_BRL_DOT2 0x1f2
-#define KEY_BRL_DOT3 0x1f3
-#define KEY_BRL_DOT4 0x1f4
-#define KEY_BRL_DOT5 0x1f5
-#define KEY_BRL_DOT6 0x1f6
-#define KEY_BRL_DOT7 0x1f7
-#define KEY_BRL_DOT8 0x1f8
-#define KEY_BRL_DOT9 0x1f9
-#define KEY_BRL_DOT10 0x1fa
-
-#define KEY_NUMERIC_0 0x200 /* used by phones, remote controls, */
-#define KEY_NUMERIC_1 0x201 /* and other keypads */
-#define KEY_NUMERIC_2 0x202
-#define KEY_NUMERIC_3 0x203
-#define KEY_NUMERIC_4 0x204
-#define KEY_NUMERIC_5 0x205
-#define KEY_NUMERIC_6 0x206
-#define KEY_NUMERIC_7 0x207
-#define KEY_NUMERIC_8 0x208
-#define KEY_NUMERIC_9 0x209
-#define KEY_NUMERIC_STAR 0x20a
-#define KEY_NUMERIC_POUND 0x20b
-#define KEY_NUMERIC_A 0x20c /* Phone key A - HUT Telephony 0xb9 */
-#define KEY_NUMERIC_B 0x20d
-#define KEY_NUMERIC_C 0x20e
-#define KEY_NUMERIC_D 0x20f
-
-#define KEY_CAMERA_FOCUS 0x210
-#define KEY_WPS_BUTTON 0x211 /* WiFi Protected Setup key */
-
-#define KEY_TOUCHPAD_TOGGLE 0x212 /* Request switch touchpad on or off */
-#define KEY_TOUCHPAD_ON 0x213
-#define KEY_TOUCHPAD_OFF 0x214
-
-#define KEY_CAMERA_ZOOMIN 0x215
-#define KEY_CAMERA_ZOOMOUT 0x216
-#define KEY_CAMERA_UP 0x217
-#define KEY_CAMERA_DOWN 0x218
-#define KEY_CAMERA_LEFT 0x219
-#define KEY_CAMERA_RIGHT 0x21a
-
-#define KEY_ATTENDANT_ON 0x21b
-#define KEY_ATTENDANT_OFF 0x21c
-#define KEY_ATTENDANT_TOGGLE 0x21d /* Attendant call on or off */
-#define KEY_LIGHTS_TOGGLE 0x21e /* Reading light on or off */
-
-#define BTN_DPAD_UP 0x220
-#define BTN_DPAD_DOWN 0x221
-#define BTN_DPAD_LEFT 0x222
-#define BTN_DPAD_RIGHT 0x223
-
-#define KEY_ALS_TOGGLE 0x230 /* Ambient light sensor */
-
-#define KEY_BUTTONCONFIG 0x240 /* AL Button Configuration */
-#define KEY_TASKMANAGER 0x241 /* AL Task/Project Manager */
-#define KEY_JOURNAL 0x242 /* AL Log/Journal/Timecard */
-#define KEY_CONTROLPANEL 0x243 /* AL Control Panel */
-#define KEY_APPSELECT 0x244 /* AL Select Task/Application */
-#define KEY_SCREENSAVER 0x245 /* AL Screen Saver */
-#define KEY_VOICECOMMAND 0x246 /* Listening Voice Command */
-
-#define KEY_BRIGHTNESS_MIN 0x250 /* Set Brightness to Minimum */
-#define KEY_BRIGHTNESS_MAX 0x251 /* Set Brightness to Maximum */
-
-#define KEY_KBDINPUTASSIST_PREV 0x260
-#define KEY_KBDINPUTASSIST_NEXT 0x261
-#define KEY_KBDINPUTASSIST_PREVGROUP 0x262
-#define KEY_KBDINPUTASSIST_NEXTGROUP 0x263
-#define KEY_KBDINPUTASSIST_ACCEPT 0x264
-#define KEY_KBDINPUTASSIST_CANCEL 0x265
-
-#define BTN_TRIGGER_HAPPY 0x2c0
-#define BTN_TRIGGER_HAPPY1 0x2c0
-#define BTN_TRIGGER_HAPPY2 0x2c1
-#define BTN_TRIGGER_HAPPY3 0x2c2
-#define BTN_TRIGGER_HAPPY4 0x2c3
-#define BTN_TRIGGER_HAPPY5 0x2c4
-#define BTN_TRIGGER_HAPPY6 0x2c5
-#define BTN_TRIGGER_HAPPY7 0x2c6
-#define BTN_TRIGGER_HAPPY8 0x2c7
-#define BTN_TRIGGER_HAPPY9 0x2c8
-#define BTN_TRIGGER_HAPPY10 0x2c9
-#define BTN_TRIGGER_HAPPY11 0x2ca
-#define BTN_TRIGGER_HAPPY12 0x2cb
-#define BTN_TRIGGER_HAPPY13 0x2cc
-#define BTN_TRIGGER_HAPPY14 0x2cd
-#define BTN_TRIGGER_HAPPY15 0x2ce
-#define BTN_TRIGGER_HAPPY16 0x2cf
-#define BTN_TRIGGER_HAPPY17 0x2d0
-#define BTN_TRIGGER_HAPPY18 0x2d1
-#define BTN_TRIGGER_HAPPY19 0x2d2
-#define BTN_TRIGGER_HAPPY20 0x2d3
-#define BTN_TRIGGER_HAPPY21 0x2d4
-#define BTN_TRIGGER_HAPPY22 0x2d5
-#define BTN_TRIGGER_HAPPY23 0x2d6
-#define BTN_TRIGGER_HAPPY24 0x2d7
-#define BTN_TRIGGER_HAPPY25 0x2d8
-#define BTN_TRIGGER_HAPPY26 0x2d9
-#define BTN_TRIGGER_HAPPY27 0x2da
-#define BTN_TRIGGER_HAPPY28 0x2db
-#define BTN_TRIGGER_HAPPY29 0x2dc
-#define BTN_TRIGGER_HAPPY30 0x2dd
-#define BTN_TRIGGER_HAPPY31 0x2de
-#define BTN_TRIGGER_HAPPY32 0x2df
-#define BTN_TRIGGER_HAPPY33 0x2e0
-#define BTN_TRIGGER_HAPPY34 0x2e1
-#define BTN_TRIGGER_HAPPY35 0x2e2
-#define BTN_TRIGGER_HAPPY36 0x2e3
-#define BTN_TRIGGER_HAPPY37 0x2e4
-#define BTN_TRIGGER_HAPPY38 0x2e5
-#define BTN_TRIGGER_HAPPY39 0x2e6
-#define BTN_TRIGGER_HAPPY40 0x2e7
-
-/* We avoid low common keys in module aliases so they don't get huge. */
-#define KEY_MIN_INTERESTING KEY_MUTE
-#define KEY_MAX 0x2ff
-#define KEY_CNT (KEY_MAX+1)
-
-/*
- * Relative axes
- */
-
-#define REL_X 0x00
-#define REL_Y 0x01
-#define REL_Z 0x02
-#define REL_RX 0x03
-#define REL_RY 0x04
-#define REL_RZ 0x05
-#define REL_HWHEEL 0x06
-#define REL_DIAL 0x07
-#define REL_WHEEL 0x08
-#define REL_MISC 0x09
-#define REL_MAX 0x0f
-#define REL_CNT (REL_MAX+1)
-
-/*
- * Absolute axes
- */
-
-#define ABS_X 0x00
-#define ABS_Y 0x01
-#define ABS_Z 0x02
-#define ABS_RX 0x03
-#define ABS_RY 0x04
-#define ABS_RZ 0x05
-#define ABS_THROTTLE 0x06
-#define ABS_RUDDER 0x07
-#define ABS_WHEEL 0x08
-#define ABS_GAS 0x09
-#define ABS_BRAKE 0x0a
-#define ABS_HAT0X 0x10
-#define ABS_HAT0Y 0x11
-#define ABS_HAT1X 0x12
-#define ABS_HAT1Y 0x13
-#define ABS_HAT2X 0x14
-#define ABS_HAT2Y 0x15
-#define ABS_HAT3X 0x16
-#define ABS_HAT3Y 0x17
-#define ABS_PRESSURE 0x18
-#define ABS_DISTANCE 0x19
-#define ABS_TILT_X 0x1a
-#define ABS_TILT_Y 0x1b
-#define ABS_TOOL_WIDTH 0x1c
-
-#define ABS_VOLUME 0x20
-
-#define ABS_MISC 0x28
-
-#define ABS_MT_SLOT 0x2f /* MT slot being modified */
-#define ABS_MT_TOUCH_MAJOR 0x30 /* Major axis of touching ellipse */
-#define ABS_MT_TOUCH_MINOR 0x31 /* Minor axis (omit if circular) */
-#define ABS_MT_WIDTH_MAJOR 0x32 /* Major axis of approaching ellipse */
-#define ABS_MT_WIDTH_MINOR 0x33 /* Minor axis (omit if circular) */
-#define ABS_MT_ORIENTATION 0x34 /* Ellipse orientation */
-#define ABS_MT_POSITION_X 0x35 /* Center X touch position */
-#define ABS_MT_POSITION_Y 0x36 /* Center Y touch position */
-#define ABS_MT_TOOL_TYPE 0x37 /* Type of touching device */
-#define ABS_MT_BLOB_ID 0x38 /* Group a set of packets as a blob */
-#define ABS_MT_TRACKING_ID 0x39 /* Unique ID of initiated contact */
-#define ABS_MT_PRESSURE 0x3a /* Pressure on contact area */
-#define ABS_MT_DISTANCE 0x3b /* Contact hover distance */
-#define ABS_MT_TOOL_X 0x3c /* Center X tool position */
-#define ABS_MT_TOOL_Y 0x3d /* Center Y tool position */
-
-
-#define ABS_MAX 0x3f
-#define ABS_CNT (ABS_MAX+1)
-
-/*
- * Switch events
- */
-
-#define SW_LID 0x00 /* set = lid shut */
-#define SW_TABLET_MODE 0x01 /* set = tablet mode */
-#define SW_HEADPHONE_INSERT 0x02 /* set = inserted */
-#define SW_RFKILL_ALL 0x03 /* rfkill master switch, type "any"
- set = radio enabled */
-#define SW_RADIO SW_RFKILL_ALL /* deprecated */
-#define SW_MICROPHONE_INSERT 0x04 /* set = inserted */
-#define SW_DOCK 0x05 /* set = plugged into dock */
-#define SW_LINEOUT_INSERT 0x06 /* set = inserted */
-#define SW_JACK_PHYSICAL_INSERT 0x07 /* set = mechanical switch set */
-#define SW_VIDEOOUT_INSERT 0x08 /* set = inserted */
-#define SW_CAMERA_LENS_COVER 0x09 /* set = lens covered */
-#define SW_KEYPAD_SLIDE 0x0a /* set = keypad slide out */
-#define SW_FRONT_PROXIMITY 0x0b /* set = front proximity sensor active */
-#define SW_ROTATE_LOCK 0x0c /* set = rotate locked/disabled */
-#define SW_LINEIN_INSERT 0x0d /* set = inserted */
-#define SW_MUTE_DEVICE 0x0e /* set = device disabled */
-#define SW_MAX 0x0f
-#define SW_CNT (SW_MAX+1)
-
-/*
- * Misc events
- */
-
-#define MSC_SERIAL 0x00
-#define MSC_PULSELED 0x01
-#define MSC_GESTURE 0x02
-#define MSC_RAW 0x03
-#define MSC_SCAN 0x04
-#define MSC_TIMESTAMP 0x05
-#define MSC_MAX 0x07
-#define MSC_CNT (MSC_MAX+1)
-
-/*
- * LEDs
- */
-
-#define LED_NUML 0x00
-#define LED_CAPSL 0x01
-#define LED_SCROLLL 0x02
-#define LED_COMPOSE 0x03
-#define LED_KANA 0x04
-#define LED_SLEEP 0x05
-#define LED_SUSPEND 0x06
-#define LED_MUTE 0x07
-#define LED_MISC 0x08
-#define LED_MAIL 0x09
-#define LED_CHARGING 0x0a
-#define LED_MAX 0x0f
-#define LED_CNT (LED_MAX+1)
-
-/*
- * Autorepeat values
- */
-
-#define REP_DELAY 0x00
-#define REP_PERIOD 0x01
-#define REP_MAX 0x01
-#define REP_CNT (REP_MAX+1)
-
-/*
- * Sounds
- */
-
-#define SND_CLICK 0x00
-#define SND_BELL 0x01
-#define SND_TONE 0x02
-#define SND_MAX 0x07
-#define SND_CNT (SND_MAX+1)
-
-/*
* IDs.
*/
--
2.4.3
^ permalink raw reply related [flat|nested] 6+ messages in thread* [PATCH v3 4/4] devicetree: bindings: Use linux-event-codes.h for evdev codes
2015-09-22 13:23 [PATCH v3 0/4] input: gpio_keys_polled: Add support for abs/rel axis Hans de Goede
` (2 preceding siblings ...)
2015-09-22 13:23 ` [PATCH v3 3/4] input: Add an input-event-codes header file Hans de Goede
@ 2015-09-22 13:24 ` Hans de Goede
2015-10-15 0:14 ` [PATCH v3 0/4] input: gpio_keys_polled: Add support for abs/rel axis Dmitry Torokhov
4 siblings, 0 replies; 6+ messages in thread
From: Hans de Goede @ 2015-09-22 13:24 UTC (permalink / raw)
To: Dmitry Torokhov
Cc: Maxime Ripard, linux-input, linux-arm-kernel, devicetree,
Hans de Goede
Add a symlink to uapi/linux/linux-event-codes.h, and include that instead
of (re)defining all the evdev type and code values in
dt-bindings/input/input.h. This way we do not need to keep all the
event codes synced manually.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Rob Herring <robh@kernel.org>
---
Changes in v3:
-Rename the symlink from input-event-codes.h to linux-event-codes.h to make
it clear that we're dealing with Linux specific defines
---
include/dt-bindings/input/input.h | 510 +-------------------------
include/dt-bindings/input/linux-event-codes.h | 1 +
2 files changed, 2 insertions(+), 509 deletions(-)
create mode 120000 include/dt-bindings/input/linux-event-codes.h
diff --git a/include/dt-bindings/input/input.h b/include/dt-bindings/input/input.h
index 042e7b3..a214133 100644
--- a/include/dt-bindings/input/input.h
+++ b/include/dt-bindings/input/input.h
@@ -9,515 +9,7 @@
#ifndef _DT_BINDINGS_INPUT_INPUT_H
#define _DT_BINDINGS_INPUT_INPUT_H
-#define KEY_RESERVED 0
-#define KEY_ESC 1
-#define KEY_1 2
-#define KEY_2 3
-#define KEY_3 4
-#define KEY_4 5
-#define KEY_5 6
-#define KEY_6 7
-#define KEY_7 8
-#define KEY_8 9
-#define KEY_9 10
-#define KEY_0 11
-#define KEY_MINUS 12
-#define KEY_EQUAL 13
-#define KEY_BACKSPACE 14
-#define KEY_TAB 15
-#define KEY_Q 16
-#define KEY_W 17
-#define KEY_E 18
-#define KEY_R 19
-#define KEY_T 20
-#define KEY_Y 21
-#define KEY_U 22
-#define KEY_I 23
-#define KEY_O 24
-#define KEY_P 25
-#define KEY_LEFTBRACE 26
-#define KEY_RIGHTBRACE 27
-#define KEY_ENTER 28
-#define KEY_LEFTCTRL 29
-#define KEY_A 30
-#define KEY_S 31
-#define KEY_D 32
-#define KEY_F 33
-#define KEY_G 34
-#define KEY_H 35
-#define KEY_J 36
-#define KEY_K 37
-#define KEY_L 38
-#define KEY_SEMICOLON 39
-#define KEY_APOSTROPHE 40
-#define KEY_GRAVE 41
-#define KEY_LEFTSHIFT 42
-#define KEY_BACKSLASH 43
-#define KEY_Z 44
-#define KEY_X 45
-#define KEY_C 46
-#define KEY_V 47
-#define KEY_B 48
-#define KEY_N 49
-#define KEY_M 50
-#define KEY_COMMA 51
-#define KEY_DOT 52
-#define KEY_SLASH 53
-#define KEY_RIGHTSHIFT 54
-#define KEY_KPASTERISK 55
-#define KEY_LEFTALT 56
-#define KEY_SPACE 57
-#define KEY_CAPSLOCK 58
-#define KEY_F1 59
-#define KEY_F2 60
-#define KEY_F3 61
-#define KEY_F4 62
-#define KEY_F5 63
-#define KEY_F6 64
-#define KEY_F7 65
-#define KEY_F8 66
-#define KEY_F9 67
-#define KEY_F10 68
-#define KEY_NUMLOCK 69
-#define KEY_SCROLLLOCK 70
-#define KEY_KP7 71
-#define KEY_KP8 72
-#define KEY_KP9 73
-#define KEY_KPMINUS 74
-#define KEY_KP4 75
-#define KEY_KP5 76
-#define KEY_KP6 77
-#define KEY_KPPLUS 78
-#define KEY_KP1 79
-#define KEY_KP2 80
-#define KEY_KP3 81
-#define KEY_KP0 82
-#define KEY_KPDOT 83
-
-#define KEY_ZENKAKUHANKAKU 85
-#define KEY_102ND 86
-#define KEY_F11 87
-#define KEY_F12 88
-#define KEY_RO 89
-#define KEY_KATAKANA 90
-#define KEY_HIRAGANA 91
-#define KEY_HENKAN 92
-#define KEY_KATAKANAHIRAGANA 93
-#define KEY_MUHENKAN 94
-#define KEY_KPJPCOMMA 95
-#define KEY_KPENTER 96
-#define KEY_RIGHTCTRL 97
-#define KEY_KPSLASH 98
-#define KEY_SYSRQ 99
-#define KEY_RIGHTALT 100
-#define KEY_LINEFEED 101
-#define KEY_HOME 102
-#define KEY_UP 103
-#define KEY_PAGEUP 104
-#define KEY_LEFT 105
-#define KEY_RIGHT 106
-#define KEY_END 107
-#define KEY_DOWN 108
-#define KEY_PAGEDOWN 109
-#define KEY_INSERT 110
-#define KEY_DELETE 111
-#define KEY_MACRO 112
-#define KEY_MUTE 113
-#define KEY_VOLUMEDOWN 114
-#define KEY_VOLUMEUP 115
-#define KEY_POWER 116 /* SC System Power Down */
-#define KEY_KPEQUAL 117
-#define KEY_KPPLUSMINUS 118
-#define KEY_PAUSE 119
-#define KEY_SCALE 120 /* AL Compiz Scale (Expose) */
-
-#define KEY_KPCOMMA 121
-#define KEY_HANGEUL 122
-#define KEY_HANGUEL KEY_HANGEUL
-#define KEY_HANJA 123
-#define KEY_YEN 124
-#define KEY_LEFTMETA 125
-#define KEY_RIGHTMETA 126
-#define KEY_COMPOSE 127
-
-#define KEY_STOP 128 /* AC Stop */
-#define KEY_AGAIN 129
-#define KEY_PROPS 130 /* AC Properties */
-#define KEY_UNDO 131 /* AC Undo */
-#define KEY_FRONT 132
-#define KEY_COPY 133 /* AC Copy */
-#define KEY_OPEN 134 /* AC Open */
-#define KEY_PASTE 135 /* AC Paste */
-#define KEY_FIND 136 /* AC Search */
-#define KEY_CUT 137 /* AC Cut */
-#define KEY_HELP 138 /* AL Integrated Help Center */
-#define KEY_MENU 139 /* Menu (show menu) */
-#define KEY_CALC 140 /* AL Calculator */
-#define KEY_SETUP 141
-#define KEY_SLEEP 142 /* SC System Sleep */
-#define KEY_WAKEUP 143 /* System Wake Up */
-#define KEY_FILE 144 /* AL Local Machine Browser */
-#define KEY_SENDFILE 145
-#define KEY_DELETEFILE 146
-#define KEY_XFER 147
-#define KEY_PROG1 148
-#define KEY_PROG2 149
-#define KEY_WWW 150 /* AL Internet Browser */
-#define KEY_MSDOS 151
-#define KEY_COFFEE 152 /* AL Terminal Lock/Screensaver */
-#define KEY_SCREENLOCK KEY_COFFEE
-#define KEY_DIRECTION 153
-#define KEY_CYCLEWINDOWS 154
-#define KEY_MAIL 155
-#define KEY_BOOKMARKS 156 /* AC Bookmarks */
-#define KEY_COMPUTER 157
-#define KEY_BACK 158 /* AC Back */
-#define KEY_FORWARD 159 /* AC Forward */
-#define KEY_CLOSECD 160
-#define KEY_EJECTCD 161
-#define KEY_EJECTCLOSECD 162
-#define KEY_NEXTSONG 163
-#define KEY_PLAYPAUSE 164
-#define KEY_PREVIOUSSONG 165
-#define KEY_STOPCD 166
-#define KEY_RECORD 167
-#define KEY_REWIND 168
-#define KEY_PHONE 169 /* Media Select Telephone */
-#define KEY_ISO 170
-#define KEY_CONFIG 171 /* AL Consumer Control Configuration */
-#define KEY_HOMEPAGE 172 /* AC Home */
-#define KEY_REFRESH 173 /* AC Refresh */
-#define KEY_EXIT 174 /* AC Exit */
-#define KEY_MOVE 175
-#define KEY_EDIT 176
-#define KEY_SCROLLUP 177
-#define KEY_SCROLLDOWN 178
-#define KEY_KPLEFTPAREN 179
-#define KEY_KPRIGHTPAREN 180
-#define KEY_NEW 181 /* AC New */
-#define KEY_REDO 182 /* AC Redo/Repeat */
-
-#define KEY_F13 183
-#define KEY_F14 184
-#define KEY_F15 185
-#define KEY_F16 186
-#define KEY_F17 187
-#define KEY_F18 188
-#define KEY_F19 189
-#define KEY_F20 190
-#define KEY_F21 191
-#define KEY_F22 192
-#define KEY_F23 193
-#define KEY_F24 194
-
-#define KEY_PLAYCD 200
-#define KEY_PAUSECD 201
-#define KEY_PROG3 202
-#define KEY_PROG4 203
-#define KEY_DASHBOARD 204 /* AL Dashboard */
-#define KEY_SUSPEND 205
-#define KEY_CLOSE 206 /* AC Close */
-#define KEY_PLAY 207
-#define KEY_FASTFORWARD 208
-#define KEY_BASSBOOST 209
-#define KEY_PRINT 210 /* AC Print */
-#define KEY_HP 211
-#define KEY_CAMERA 212
-#define KEY_SOUND 213
-#define KEY_QUESTION 214
-#define KEY_EMAIL 215
-#define KEY_CHAT 216
-#define KEY_SEARCH 217
-#define KEY_CONNECT 218
-#define KEY_FINANCE 219 /* AL Checkbook/Finance */
-#define KEY_SPORT 220
-#define KEY_SHOP 221
-#define KEY_ALTERASE 222
-#define KEY_CANCEL 223 /* AC Cancel */
-#define KEY_BRIGHTNESSDOWN 224
-#define KEY_BRIGHTNESSUP 225
-#define KEY_MEDIA 226
-
-#define KEY_SWITCHVIDEOMODE 227 /* Cycle between available video
- outputs (Monitor/LCD/TV-out/etc) */
-#define KEY_KBDILLUMTOGGLE 228
-#define KEY_KBDILLUMDOWN 229
-#define KEY_KBDILLUMUP 230
-
-#define KEY_SEND 231 /* AC Send */
-#define KEY_REPLY 232 /* AC Reply */
-#define KEY_FORWARDMAIL 233 /* AC Forward Msg */
-#define KEY_SAVE 234 /* AC Save */
-#define KEY_DOCUMENTS 235
-
-#define KEY_BATTERY 236
-
-#define KEY_BLUETOOTH 237
-#define KEY_WLAN 238
-#define KEY_UWB 239
-
-#define KEY_UNKNOWN 240
-
-#define KEY_VIDEO_NEXT 241 /* drive next video source */
-#define KEY_VIDEO_PREV 242 /* drive previous video source */
-#define KEY_BRIGHTNESS_CYCLE 243 /* brightness up, after max is min */
-#define KEY_BRIGHTNESS_ZERO 244 /* brightness off, use ambient */
-#define KEY_DISPLAY_OFF 245 /* display device to off state */
-
-#define KEY_WIMAX 246
-#define KEY_RFKILL 247 /* Key that controls all radios */
-
-#define KEY_MICMUTE 248 /* Mute / unmute the microphone */
-
-/* Code 255 is reserved for special needs of AT keyboard driver */
-
-#define BTN_MISC 0x100
-#define BTN_0 0x100
-#define BTN_1 0x101
-#define BTN_2 0x102
-#define BTN_3 0x103
-#define BTN_4 0x104
-#define BTN_5 0x105
-#define BTN_6 0x106
-#define BTN_7 0x107
-#define BTN_8 0x108
-#define BTN_9 0x109
-
-#define BTN_MOUSE 0x110
-#define BTN_LEFT 0x110
-#define BTN_RIGHT 0x111
-#define BTN_MIDDLE 0x112
-#define BTN_SIDE 0x113
-#define BTN_EXTRA 0x114
-#define BTN_FORWARD 0x115
-#define BTN_BACK 0x116
-#define BTN_TASK 0x117
-
-#define BTN_JOYSTICK 0x120
-#define BTN_TRIGGER 0x120
-#define BTN_THUMB 0x121
-#define BTN_THUMB2 0x122
-#define BTN_TOP 0x123
-#define BTN_TOP2 0x124
-#define BTN_PINKIE 0x125
-#define BTN_BASE 0x126
-#define BTN_BASE2 0x127
-#define BTN_BASE3 0x128
-#define BTN_BASE4 0x129
-#define BTN_BASE5 0x12a
-#define BTN_BASE6 0x12b
-#define BTN_DEAD 0x12f
-
-#define BTN_GAMEPAD 0x130
-#define BTN_SOUTH 0x130
-#define BTN_A BTN_SOUTH
-#define BTN_EAST 0x131
-#define BTN_B BTN_EAST
-#define BTN_C 0x132
-#define BTN_NORTH 0x133
-#define BTN_X BTN_NORTH
-#define BTN_WEST 0x134
-#define BTN_Y BTN_WEST
-#define BTN_Z 0x135
-#define BTN_TL 0x136
-#define BTN_TR 0x137
-#define BTN_TL2 0x138
-#define BTN_TR2 0x139
-#define BTN_SELECT 0x13a
-#define BTN_START 0x13b
-#define BTN_MODE 0x13c
-#define BTN_THUMBL 0x13d
-#define BTN_THUMBR 0x13e
-
-#define BTN_DIGI 0x140
-#define BTN_TOOL_PEN 0x140
-#define BTN_TOOL_RUBBER 0x141
-#define BTN_TOOL_BRUSH 0x142
-#define BTN_TOOL_PENCIL 0x143
-#define BTN_TOOL_AIRBRUSH 0x144
-#define BTN_TOOL_FINGER 0x145
-#define BTN_TOOL_MOUSE 0x146
-#define BTN_TOOL_LENS 0x147
-#define BTN_TOOL_QUINTTAP 0x148 /* Five fingers on trackpad */
-#define BTN_TOUCH 0x14a
-#define BTN_STYLUS 0x14b
-#define BTN_STYLUS2 0x14c
-#define BTN_TOOL_DOUBLETAP 0x14d
-#define BTN_TOOL_TRIPLETAP 0x14e
-#define BTN_TOOL_QUADTAP 0x14f /* Four fingers on trackpad */
-
-#define BTN_WHEEL 0x150
-#define BTN_GEAR_DOWN 0x150
-#define BTN_GEAR_UP 0x151
-
-#define KEY_OK 0x160
-#define KEY_SELECT 0x161
-#define KEY_GOTO 0x162
-#define KEY_CLEAR 0x163
-#define KEY_POWER2 0x164
-#define KEY_OPTION 0x165
-#define KEY_INFO 0x166 /* AL OEM Features/Tips/Tutorial */
-#define KEY_TIME 0x167
-#define KEY_VENDOR 0x168
-#define KEY_ARCHIVE 0x169
-#define KEY_PROGRAM 0x16a /* Media Select Program Guide */
-#define KEY_CHANNEL 0x16b
-#define KEY_FAVORITES 0x16c
-#define KEY_EPG 0x16d
-#define KEY_PVR 0x16e /* Media Select Home */
-#define KEY_MHP 0x16f
-#define KEY_LANGUAGE 0x170
-#define KEY_TITLE 0x171
-#define KEY_SUBTITLE 0x172
-#define KEY_ANGLE 0x173
-#define KEY_ZOOM 0x174
-#define KEY_MODE 0x175
-#define KEY_KEYBOARD 0x176
-#define KEY_SCREEN 0x177
-#define KEY_PC 0x178 /* Media Select Computer */
-#define KEY_TV 0x179 /* Media Select TV */
-#define KEY_TV2 0x17a /* Media Select Cable */
-#define KEY_VCR 0x17b /* Media Select VCR */
-#define KEY_VCR2 0x17c /* VCR Plus */
-#define KEY_SAT 0x17d /* Media Select Satellite */
-#define KEY_SAT2 0x17e
-#define KEY_CD 0x17f /* Media Select CD */
-#define KEY_TAPE 0x180 /* Media Select Tape */
-#define KEY_RADIO 0x181
-#define KEY_TUNER 0x182 /* Media Select Tuner */
-#define KEY_PLAYER 0x183
-#define KEY_TEXT 0x184
-#define KEY_DVD 0x185 /* Media Select DVD */
-#define KEY_AUX 0x186
-#define KEY_MP3 0x187
-#define KEY_AUDIO 0x188 /* AL Audio Browser */
-#define KEY_VIDEO 0x189 /* AL Movie Browser */
-#define KEY_DIRECTORY 0x18a
-#define KEY_LIST 0x18b
-#define KEY_MEMO 0x18c /* Media Select Messages */
-#define KEY_CALENDAR 0x18d
-#define KEY_RED 0x18e
-#define KEY_GREEN 0x18f
-#define KEY_YELLOW 0x190
-#define KEY_BLUE 0x191
-#define KEY_CHANNELUP 0x192 /* Channel Increment */
-#define KEY_CHANNELDOWN 0x193 /* Channel Decrement */
-#define KEY_FIRST 0x194
-#define KEY_LAST 0x195 /* Recall Last */
-#define KEY_AB 0x196
-#define KEY_NEXT 0x197
-#define KEY_RESTART 0x198
-#define KEY_SLOW 0x199
-#define KEY_SHUFFLE 0x19a
-#define KEY_BREAK 0x19b
-#define KEY_PREVIOUS 0x19c
-#define KEY_DIGITS 0x19d
-#define KEY_TEEN 0x19e
-#define KEY_TWEN 0x19f
-#define KEY_VIDEOPHONE 0x1a0 /* Media Select Video Phone */
-#define KEY_GAMES 0x1a1 /* Media Select Games */
-#define KEY_ZOOMIN 0x1a2 /* AC Zoom In */
-#define KEY_ZOOMOUT 0x1a3 /* AC Zoom Out */
-#define KEY_ZOOMRESET 0x1a4 /* AC Zoom */
-#define KEY_WORDPROCESSOR 0x1a5 /* AL Word Processor */
-#define KEY_EDITOR 0x1a6 /* AL Text Editor */
-#define KEY_SPREADSHEET 0x1a7 /* AL Spreadsheet */
-#define KEY_GRAPHICSEDITOR 0x1a8 /* AL Graphics Editor */
-#define KEY_PRESENTATION 0x1a9 /* AL Presentation App */
-#define KEY_DATABASE 0x1aa /* AL Database App */
-#define KEY_NEWS 0x1ab /* AL Newsreader */
-#define KEY_VOICEMAIL 0x1ac /* AL Voicemail */
-#define KEY_ADDRESSBOOK 0x1ad /* AL Contacts/Address Book */
-#define KEY_MESSENGER 0x1ae /* AL Instant Messaging */
-#define KEY_DISPLAYTOGGLE 0x1af /* Turn display (LCD) on and off */
-#define KEY_SPELLCHECK 0x1b0 /* AL Spell Check */
-#define KEY_LOGOFF 0x1b1 /* AL Logoff */
-
-#define KEY_DOLLAR 0x1b2
-#define KEY_EURO 0x1b3
-
-#define KEY_FRAMEBACK 0x1b4 /* Consumer - transport controls */
-#define KEY_FRAMEFORWARD 0x1b5
-#define KEY_CONTEXT_MENU 0x1b6 /* GenDesc - system context menu */
-#define KEY_MEDIA_REPEAT 0x1b7 /* Consumer - transport control */
-#define KEY_10CHANNELSUP 0x1b8 /* 10 channels up (10+) */
-#define KEY_10CHANNELSDOWN 0x1b9 /* 10 channels down (10-) */
-#define KEY_IMAGES 0x1ba /* AL Image Browser */
-
-#define KEY_DEL_EOL 0x1c0
-#define KEY_DEL_EOS 0x1c1
-#define KEY_INS_LINE 0x1c2
-#define KEY_DEL_LINE 0x1c3
-
-#define KEY_FN 0x1d0
-#define KEY_FN_ESC 0x1d1
-#define KEY_FN_F1 0x1d2
-#define KEY_FN_F2 0x1d3
-#define KEY_FN_F3 0x1d4
-#define KEY_FN_F4 0x1d5
-#define KEY_FN_F5 0x1d6
-#define KEY_FN_F6 0x1d7
-#define KEY_FN_F7 0x1d8
-#define KEY_FN_F8 0x1d9
-#define KEY_FN_F9 0x1da
-#define KEY_FN_F10 0x1db
-#define KEY_FN_F11 0x1dc
-#define KEY_FN_F12 0x1dd
-#define KEY_FN_1 0x1de
-#define KEY_FN_2 0x1df
-#define KEY_FN_D 0x1e0
-#define KEY_FN_E 0x1e1
-#define KEY_FN_F 0x1e2
-#define KEY_FN_S 0x1e3
-#define KEY_FN_B 0x1e4
-
-#define KEY_BRL_DOT1 0x1f1
-#define KEY_BRL_DOT2 0x1f2
-#define KEY_BRL_DOT3 0x1f3
-#define KEY_BRL_DOT4 0x1f4
-#define KEY_BRL_DOT5 0x1f5
-#define KEY_BRL_DOT6 0x1f6
-#define KEY_BRL_DOT7 0x1f7
-#define KEY_BRL_DOT8 0x1f8
-#define KEY_BRL_DOT9 0x1f9
-#define KEY_BRL_DOT10 0x1fa
-
-#define KEY_NUMERIC_0 0x200 /* used by phones, remote controls, */
-#define KEY_NUMERIC_1 0x201 /* and other keypads */
-#define KEY_NUMERIC_2 0x202
-#define KEY_NUMERIC_3 0x203
-#define KEY_NUMERIC_4 0x204
-#define KEY_NUMERIC_5 0x205
-#define KEY_NUMERIC_6 0x206
-#define KEY_NUMERIC_7 0x207
-#define KEY_NUMERIC_8 0x208
-#define KEY_NUMERIC_9 0x209
-#define KEY_NUMERIC_STAR 0x20a
-#define KEY_NUMERIC_POUND 0x20b
-
-#define KEY_CAMERA_FOCUS 0x210
-#define KEY_WPS_BUTTON 0x211 /* WiFi Protected Setup key */
-
-#define KEY_TOUCHPAD_TOGGLE 0x212 /* Request switch touchpad on or off */
-#define KEY_TOUCHPAD_ON 0x213
-#define KEY_TOUCHPAD_OFF 0x214
-
-#define KEY_CAMERA_ZOOMIN 0x215
-#define KEY_CAMERA_ZOOMOUT 0x216
-#define KEY_CAMERA_UP 0x217
-#define KEY_CAMERA_DOWN 0x218
-#define KEY_CAMERA_LEFT 0x219
-#define KEY_CAMERA_RIGHT 0x21a
-
-#define KEY_ATTENDANT_ON 0x21b
-#define KEY_ATTENDANT_OFF 0x21c
-#define KEY_ATTENDANT_TOGGLE 0x21d /* Attendant call on or off */
-#define KEY_LIGHTS_TOGGLE 0x21e /* Reading light on or off */
-
-#define BTN_DPAD_UP 0x220
-#define BTN_DPAD_DOWN 0x221
-#define BTN_DPAD_LEFT 0x222
-#define BTN_DPAD_RIGHT 0x223
+#include "linux-event-codes.h"
#define MATRIX_KEY(row, col, code) \
((((row) & 0xFF) << 24) | (((col) & 0xFF) << 16) | ((code) & 0xFFFF))
diff --git a/include/dt-bindings/input/linux-event-codes.h b/include/dt-bindings/input/linux-event-codes.h
new file mode 120000
index 0000000..693bbcd
--- /dev/null
+++ b/include/dt-bindings/input/linux-event-codes.h
@@ -0,0 +1 @@
+../../uapi/linux/input-event-codes.h
\ No newline at end of file
--
2.4.3
^ permalink raw reply related [flat|nested] 6+ messages in thread* Re: [PATCH v3 0/4] input: gpio_keys_polled: Add support for abs/rel axis
2015-09-22 13:23 [PATCH v3 0/4] input: gpio_keys_polled: Add support for abs/rel axis Hans de Goede
` (3 preceding siblings ...)
2015-09-22 13:24 ` [PATCH v3 4/4] devicetree: bindings: Use linux-event-codes.h for evdev codes Hans de Goede
@ 2015-10-15 0:14 ` Dmitry Torokhov
4 siblings, 0 replies; 6+ messages in thread
From: Dmitry Torokhov @ 2015-10-15 0:14 UTC (permalink / raw)
To: Hans de Goede; +Cc: Maxime Ripard, linux-input, linux-arm-kernel, devicetree
On Tue, Sep 22, 2015 at 03:23:56PM +0200, Hans de Goede wrote:
> Hi Dmitry,
>
> This patch-series really is 2 related series:
>
> Patch 1 + 2:
>
> Support for abs/rel axis in gpio_keys_polled, the dt-bindings patch is
> updated, the actual implementation is the same as the v2 version.
>
> Patch 3 + 4:
>
> Add a single header with key / btn / axis defines to be shared by input.h
> and the dt-bindings headers, as requested by you. The first patch introduces
> a new header for this, the second patch makes dt-bindings/input/input.h
> use this new header. The second patch has been Acked by the devicetree
> maintainer, and since it depends on the first one I believe that it is
> best if this patch gets merged via your tree too.
Applied the lot, thank you.
--
Dmitry
^ permalink raw reply [flat|nested] 6+ messages in thread