From: Dave Gerlach <d-gerlach@ti.com>
To: linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-omap@vger.kernel.org
Cc: Jassi Brar <jassisinghbrar@gmail.com>, Suman Anna <s-anna@ti.com>,
Tony Lindgren <tony@atomide.com>,
Santosh Shilimkar <santosh.shilimkar@ti.com>,
Keerty J <j-keerthy@ti.com>, Dave Gerlach <d-gerlach@ti.com>
Subject: [PATCH v3 0/3] soc: ti: Introduce wkup_m3_ipc driver
Date: Tue, 22 Sep 2015 19:14:51 -0500 [thread overview]
Message-ID: <1442967294-23837-1-git-send-email-d-gerlach@ti.com> (raw)
Hi,
This series is version 3 of the code to introduce a wkup_m3_ipc driver
to handle communication between the MPU and Cortex M3 present on TI AM335x
and AM437x SoCs. v2 of this series can be found at [1]. Only patch 3
has been changed based on a request from Tony and a few cleanups:
- Rather than exporting all of the functionality of the driver, added
wkup_m3_ipc_get and wkup_m3_ipc_put to allow users to just get a handle
containing an ops structure for use.
- Changed all ops (previously exported functions) to take pointer to
struct wkup_m3_ipc as an argument now that user code will get this
from wkup_m3_ipc_get.
- General cleanup to probe function
- Added MODULE_DEVICE_TABLE so driver can probe automatically.
The series containing the DT nodes can be found here [2]. The actual dt
nodes for wkup_m3_ipc (last two patches) have been merged but discussion
is still open for the ti,mbox-send-noirq flag patches and depends on the
comments provided for the omap-mailbox change presented in patch 1 of
this series.
A full branch containing all necessary PM code for both am335x and am437x
has been pushed here [3] to provide a big picture view of the plan for
this series.
This driver relies on the firmware at [4] in the next-upstream branch
being present in /lib/firmware in the rootfs or built in to the kernel.
Regards,
Dave
[1] https://lkml.org/lkml/2015/7/17/797
[2] https://lkml.org/lkml/2015/7/17/813
[3] https://github.com/dgerlach/linux-pm/tree/pm-v4.3-rc1-amx3-suspend
[4] https://git.ti.com/ti-cm3-pm-firmware
Dave Gerlach (3):
mailbox/omap: Add ti,mbox-send-noirq quirk to fix AM33xx CPU Idle
Documentation: dt: add bindings for TI Wakeup M3 IPC device
soc: ti: Add wkup_m3_ipc driver
.../devicetree/bindings/mailbox/omap-mailbox.txt | 8 +
.../devicetree/bindings/soc/ti/wkup_m3_ipc.txt | 57 +++
drivers/mailbox/omap-mailbox.c | 49 +-
drivers/soc/ti/Kconfig | 10 +
drivers/soc/ti/Makefile | 1 +
drivers/soc/ti/wkup_m3_ipc.c | 508 +++++++++++++++++++++
include/linux/wkup_m3_ipc.h | 55 +++
7 files changed, 684 insertions(+), 4 deletions(-)
create mode 100644 Documentation/devicetree/bindings/soc/ti/wkup_m3_ipc.txt
create mode 100644 drivers/soc/ti/wkup_m3_ipc.c
create mode 100644 include/linux/wkup_m3_ipc.h
--
2.4.6
next reply other threads:[~2015-09-23 0:14 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-09-23 0:14 Dave Gerlach [this message]
2015-09-23 0:14 ` [PATCH v3 1/3] mailbox/omap: Add ti,mbox-send-noirq quirk to fix AM33xx CPU Idle Dave Gerlach
[not found] ` <1442967294-23837-2-git-send-email-d-gerlach-l0cyMroinI0@public.gmane.org>
2015-10-21 4:44 ` Jassi Brar
2015-10-22 0:05 ` Suman Anna
2015-10-22 4:42 ` Jassi Brar
2015-10-22 16:00 ` Suman Anna
2015-09-23 0:14 ` [PATCH v3 2/3] Documentation: dt: add bindings for TI Wakeup M3 IPC device Dave Gerlach
2015-09-23 0:14 ` [PATCH v3 3/3] soc: ti: Add wkup_m3_ipc driver Dave Gerlach
[not found] ` <1442967294-23837-1-git-send-email-d-gerlach-l0cyMroinI0@public.gmane.org>
2015-10-20 16:18 ` [PATCH v3 0/3] soc: ti: Introduce " Tony Lindgren
2015-12-02 20:29 ` Dave Gerlach
[not found] ` <565F54C1.8090407-l0cyMroinI0@public.gmane.org>
2015-12-03 15:47 ` Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1442967294-23837-1-git-send-email-d-gerlach@ti.com \
--to=d-gerlach@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=j-keerthy@ti.com \
--cc=jassisinghbrar@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=s-anna@ti.com \
--cc=santosh.shilimkar@ti.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).