From: Adrian Alonso <aalonso@freescale.com>
To: linux-arm-kernel@lists.infradead.org, shawn.guo@linaro.org,
shawnguo@kernel.org, linus.walleij@linaro.org, lznuaa@gmail.com
Cc: linux-gpio@vger.kernel.org, devicetree@vger.kernel.org,
kernel@pengutronix.de, robh+dt@kernel.org,
Anson.Huang@freescale.com, Frank.Li@freescale.com,
yibin.gong@freescale.com, nitin.garg@freescale.com
Subject: [PATCH v6 5/6] pinctrl: freescale: imx7d: support iomux lpsr controller
Date: Fri, 25 Sep 2015 16:06:01 -0500 [thread overview]
Message-ID: <1443215162-13716-5-git-send-email-aalonso@freescale.com> (raw)
In-Reply-To: <1443215162-13716-1-git-send-email-aalonso@freescale.com>
iMX7D has two iomuxc controllers, iomuxc controller similar as
previous iMX SoC generation and iomuxc-lpsr which provides low
power state rentetion capabilities on gpios that are part of
iomuxc-lpsr
Add iomuxc-lpsr gpio group id's
Signed-off-by: Adrian Alonso <aalonso@freescale.com>
---
Changes for V2: Add imx7d_lpsr_pads enums
Changes for V3: Resend
Changes for V4: Resend
Changes for V5: Remove flags SHARE_INPUT_SELECT_REG and
ZERO_OFFSET_VALID.
Changes for V6: Restore ZERO_OFFSET_VALID flag.
drivers/pinctrl/freescale/pinctrl-imx7d.c | 30 ++++++++++++++++++++++++++++++
1 file changed, 30 insertions(+)
diff --git a/drivers/pinctrl/freescale/pinctrl-imx7d.c b/drivers/pinctrl/freescale/pinctrl-imx7d.c
index 1fa7530..16dc925 100644
--- a/drivers/pinctrl/freescale/pinctrl-imx7d.c
+++ b/drivers/pinctrl/freescale/pinctrl-imx7d.c
@@ -174,6 +174,17 @@ enum imx7d_pads {
MX7D_PAD_ENET1_COL = 154,
};
+enum imx7d_lpsr_pads {
+ MX7D_PAD_GPIO1_IO00 = 0,
+ MX7D_PAD_GPIO1_IO01 = 1,
+ MX7D_PAD_GPIO1_IO02 = 2,
+ MX7D_PAD_GPIO1_IO03 = 3,
+ MX7D_PAD_GPIO1_IO04 = 4,
+ MX7D_PAD_GPIO1_IO05 = 5,
+ MX7D_PAD_GPIO1_IO06 = 6,
+ MX7D_PAD_GPIO1_IO07 = 7,
+};
+
/* Pad names for the pinmux subsystem */
static const struct pinctrl_pin_desc imx7d_pinctrl_pads[] = {
IMX_PINCTRL_PIN(MX7D_PAD_RESERVE0),
@@ -333,13 +344,32 @@ static const struct pinctrl_pin_desc imx7d_pinctrl_pads[] = {
IMX_PINCTRL_PIN(MX7D_PAD_ENET1_COL),
};
+/* Pad names for the pinmux subsystem */
+static const struct pinctrl_pin_desc imx7d_lpsr_pinctrl_pads[] = {
+ IMX_PINCTRL_PIN(MX7D_PAD_GPIO1_IO00),
+ IMX_PINCTRL_PIN(MX7D_PAD_GPIO1_IO01),
+ IMX_PINCTRL_PIN(MX7D_PAD_GPIO1_IO02),
+ IMX_PINCTRL_PIN(MX7D_PAD_GPIO1_IO03),
+ IMX_PINCTRL_PIN(MX7D_PAD_GPIO1_IO04),
+ IMX_PINCTRL_PIN(MX7D_PAD_GPIO1_IO05),
+ IMX_PINCTRL_PIN(MX7D_PAD_GPIO1_IO06),
+ IMX_PINCTRL_PIN(MX7D_PAD_GPIO1_IO07),
+};
+
static struct imx_pinctrl_soc_info imx7d_pinctrl_info = {
.pins = imx7d_pinctrl_pads,
.npins = ARRAY_SIZE(imx7d_pinctrl_pads),
};
+static struct imx_pinctrl_soc_info imx7d_lpsr_pinctrl_info = {
+ .pins = imx7d_lpsr_pinctrl_pads,
+ .npins = ARRAY_SIZE(imx7d_lpsr_pinctrl_pads),
+ .flags = ZERO_OFFSET_VALID,
+};
+
static struct of_device_id imx7d_pinctrl_of_match[] = {
{ .compatible = "fsl,imx7d-iomuxc", .data = &imx7d_pinctrl_info, },
+ { .compatible = "fsl,imx7d-iomuxc-lpsr", .data = &imx7d_lpsr_pinctrl_info },
{ /* sentinel */ }
};
--
2.1.4
next prev parent reply other threads:[~2015-09-25 21:06 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-09-25 21:05 [PATCH v6 1/6] ARM: dts: imx: imx7d add iomuxc lpsr device node Adrian Alonso
2015-09-25 21:05 ` [PATCH v6 2/6] ARM: dts: imx: imx7d-sbd add iomuxc-lpsr hoggrp-2 pads Adrian Alonso
2015-09-26 0:38 ` Shawn Guo
[not found] ` <1443215162-13716-1-git-send-email-aalonso-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
2015-09-25 21:05 ` [PATCH v6 3/6] pinctrl: freescale: imx: allow mux_reg offset zero Adrian Alonso
2015-09-26 0:39 ` Shawn Guo
2015-10-02 21:37 ` Linus Walleij
2015-09-25 21:06 ` [PATCH v6 4/6] pinctrl: freescale: imx: add shared input select reg support Adrian Alonso
2015-10-02 21:39 ` Linus Walleij
2015-09-25 21:06 ` Adrian Alonso [this message]
2015-09-25 21:06 ` [PATCH v6 6/6] pinctrl: freescale: imx: imx7d iomuxc-lpsr devicetree bindings Adrian Alonso
2015-09-26 0:44 ` Shawn Guo
2015-09-26 0:28 ` [PATCH v6 1/6] ARM: dts: imx: imx7d add iomuxc lpsr device node Shawn Guo
2015-09-26 0:33 ` Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1443215162-13716-5-git-send-email-aalonso@freescale.com \
--to=aalonso@freescale.com \
--cc=Anson.Huang@freescale.com \
--cc=Frank.Li@freescale.com \
--cc=devicetree@vger.kernel.org \
--cc=kernel@pengutronix.de \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-gpio@vger.kernel.org \
--cc=lznuaa@gmail.com \
--cc=nitin.garg@freescale.com \
--cc=robh+dt@kernel.org \
--cc=shawn.guo@linaro.org \
--cc=shawnguo@kernel.org \
--cc=yibin.gong@freescale.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).