From mboxrd@z Thu Jan 1 00:00:00 1970 From: Adrian Alonso Subject: [PATCH v7 1/7] ARM: dts: imx: imx7d-sbd remove fixed can2-3v3 regulator Date: Mon, 28 Sep 2015 16:56:35 -0500 Message-ID: <1443477401-17238-1-git-send-email-aalonso@freescale.com> Mime-Version: 1.0 Content-Type: text/plain Return-path: Sender: linux-gpio-owner@vger.kernel.org To: linux-arm-kernel@lists.infradead.org, shawn.guo@linaro.org, shawnguo@kernel.org, linus.walleij@linaro.org, lznuaa@gmail.com Cc: linux-gpio@vger.kernel.org, devicetree@vger.kernel.org, kernel@pengutronix.de, robh+dt@kernel.org, Anson.Huang@freescale.com, Frank.Li@freescale.com, yibin.gong@freescale.com, nitin.garg@freescale.com List-Id: devicetree@vger.kernel.org Remove incorrect can2-3v3 fixed regulator, imx7d-sdb doesn't have a dedicated can2 fixed regulator instead it shares PERI_3V3 fixed regulator (RT8070ZS) which is enabled by default (hardwired) from pmic pfuze3000 NVCC_3V3 power rail. Signed-off-by: Adrian Alonso --- Changes for V7: New patch in series arch/arm/boot/dts/imx7d-sdb.dts | 11 +---------- 1 file changed, 1 insertion(+), 10 deletions(-) diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts index 8059458..83f0053 100644 --- a/arch/arm/boot/dts/imx7d-sdb.dts +++ b/arch/arm/boot/dts/imx7d-sdb.dts @@ -78,16 +78,7 @@ enable-active-high; }; - reg_can2_3v3: regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - regulator-name = "can2-3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&gpio1 7 GPIO_ACTIVE_LOW>; - }; - - reg_vref_1v8: regulator@3 { + reg_vref_1v8: regulator@2 { compatible = "regulator-fixed"; reg = <3>; regulator-name = "vref-1v8"; -- 2.1.4