[PATCH v3 0/8] Build and support rk3036 SoC platform

[PATCH v3 0/8] Build and support rk3036 SoC platform

[Xing Zheng]

Hi,
  We need to support rk3036 soc platform via upstream, there are
3 primary parts for the initial release of minimum system: dts,
pinctrl, and clock tree for rk3036, and additional, we can use
these startup and run to init processs.

Thanks.

Changed in v3:
- optimized some codes based on v2
- removed the patch "initial set time for rtc-hym8563" (useless)
- removed the patch "pinctrl" (approved)

Changed in v2:
- based on v1, add clock controller documentation
- enable timer5 startup
- add smp for cpu1
- initial set time for rtc-hym8563

Changes in v1:
- add dts, pinctrl and clock tree for rk3036 soc platform

The patchset (8):
8) rockchip: make sure timer5 is enabled on rk3036 platforms
7) ARM: dts: enable smp for rk3036
6) ARM: rockchip: add support smp for rk3036
5) clk: rockchip: add new clock type and controller for rk3036
4) dt-bindings: add documentation of rk3036 clock controller
3) clk: rockchip: add clock controller for rk3036
2) clk: rockchip: add dt-binding header for rk3036
1) ARM: dts: rockchip: add core rk3036 dts


Changes in v3:
Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>

Xing Zheng (8):
  ARM: dts: rockchip: add core rk3036 dts
  clk: rockchip: add dt-binding header for rk3036
  clk: rockchip: add clock controller for rk3036
  dt-bindings: add documentation of rk3036 clock controller
  clk: rockchip: add new clock type and controller for rk3036
  ARM: rockchip: add support smp for rk3036
  ARM: dts: enable smp for rk3036
  rockchip: make sure timer5 is enabled on rk3036 platforms

 .../bindings/clock/rockchip,rk3036-cru.txt         |   56 +++
 arch/arm/boot/dts/Makefile                         |    1 +
 arch/arm/boot/dts/rk3036-evb.dts                   |   64 +++
 arch/arm/boot/dts/rk3036.dtsi                      |  383 +++++++++++++++
 arch/arm/mach-rockchip/platsmp.c                   |  142 ++++++
 arch/arm/mach-rockchip/rockchip.c                  |   44 +-
 drivers/clk/rockchip/Makefile                      |    1 +
 drivers/clk/rockchip/clk-pll.c                     |  243 +++++++++-
 drivers/clk/rockchip/clk-rk3036.c                  |  500 ++++++++++++++++++++
 drivers/clk/rockchip/clk.h                         |   30 ++
 include/dt-bindings/clock/rk3036-cru.h             |  195 ++++++++
 11 files changed, 1641 insertions(+), 18 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/clock/rockchip,rk3036-cru.txt
 create mode 100644 arch/arm/boot/dts/rk3036-evb.dts
 create mode 100644 arch/arm/boot/dts/rk3036.dtsi
 create mode 100644 drivers/clk/rockchip/clk-rk3036.c
 create mode 100644 include/dt-bindings/clock/rk3036-cru.h

-- 
1.7.9.5

[PATCH v3 1/8] ARM: dts: rockchip: add core rk3036 dts

[Xing Zheng]

Initial release for rk3036, node definitions rk3036 sdk board.

Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
---

Changes in v3: None

 arch/arm/boot/dts/Makefile       |    1 +
 arch/arm/boot/dts/rk3036-evb.dts |   64 +++++++
 arch/arm/boot/dts/rk3036.dtsi    |  382 ++++++++++++++++++++++++++++++++++++++
 3 files changed, 447 insertions(+)
 create mode 100644 arch/arm/boot/dts/rk3036-evb.dts
 create mode 100644 arch/arm/boot/dts/rk3036.dtsi

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 1c5f225..82e4caf 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -499,6 +499,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \
 dtb-$(CONFIG_ARCH_REALVIEW) += \
 	arm-realview-pb1176.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += \
+	rk3036-evb.dtb \
 	rk3066a-bqcurie2.dtb \
 	rk3066a-marsboard.dtb \
 	rk3066a-rayeager.dtb \
diff --git a/arch/arm/boot/dts/rk3036-evb.dts b/arch/arm/boot/dts/rk3036-evb.dts
new file mode 100644
index 0000000..645d144
--- /dev/null
+++ b/arch/arm/boot/dts/rk3036-evb.dts
@@ -0,0 +1,64 @@
+/*
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *  Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "rk3036.dtsi"
+
+/ {
+	model = "Rockchip RK3036 Evaluation board";
+	compatible = "rockchip,rk3036-evb", "rockchip,rk3036";
+};
+
+&i2c1 {
+	status = "okay";
+
+        hym8563: hym8563@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "xin32k";
+	};
+};
+
+&uart2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/rk3036.dtsi b/arch/arm/boot/dts/rk3036.dtsi
new file mode 100644
index 0000000..fea51de
--- /dev/null
+++ b/arch/arm/boot/dts/rk3036.dtsi
@@ -0,0 +1,382 @@
+/*
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/clock/rk3036-cru.h>
+#include "skeleton.dtsi"
+
+/ {
+	compatible = "rockchip,rk3036";
+
+	interrupt-parent = <&gic>;
+
+	aliases {
+		i2c1 = &i2c1;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x60000000 0x40000000>;
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+		             <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@f00 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0xf00>;
+			operating-points = <
+				/* KHz    uV */
+				 816000 1000000
+			>;
+			clock-latency = <40000>;
+			clocks = <&cru ARMCLK>;
+			resets = <&cru SRST_CORE0>;
+		};
+		cpu1: cpu@f01 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0xf01>;
+			resets = <&cru SRST_CORE1>;
+		};
+	};
+
+	amba {
+		compatible = "arm,amba-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		pdma: pdma@20078000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x20078000 0x4000>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			clocks = <&cru ACLK_DMAC2>;
+			clock-names = "apb_pclk";
+		};
+	};
+
+	xin24m: oscillator {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "xin24m";
+		#clock-cells = <0>;
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		arm,cpu-registers-not-fw-configured;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		clock-frequency = <24000000>;
+	};
+
+	gic: interrupt-controller@10139000 {
+		compatible = "arm,gic-400";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		#address-cells = <0>;
+
+		reg = <0x10139000 0x1000>,
+		      <0x1013a000 0x1000>,
+		      <0x1013c000 0x2000>,
+		      <0x1013e000 0x2000>;
+		interrupts = <GIC_PPI 9 0xf04>;
+	};
+
+	sram: sram@10080000 {
+		compatible = "rockchip,rk3036-smp-sram", "mmio-sram";
+		reg = <0x10080000 0x2000>;
+	};
+
+	cru: clock-controller@20000000 {
+		compatible = "rockchip,rk3036-cru";
+		reg = <0x20000000 0x1000>;
+		rockchip,grf = <&grf>;
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+		assigned-clocks = <&cru PLL_GPLL>;
+		assigned-clock-rates = <594000000>;
+	};
+
+	grf: syscon@20008000 {
+		compatible = "rockchip,rk3036-grf", "syscon";
+		reg = <0x20008000 0x1000>;
+	};
+
+	pwm0: pwm@20050000 {
+		compatible = "rockchip,rk3036-pwm", "rockchip,rk2928-pwm";
+		reg = <0x20050000 0x10>;
+		#pwm-cells = <3>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm0_pin>;
+		clocks = <&cru PCLK_PWM>;
+		clock-names = "pwm";
+		status = "disabled";
+	};
+
+	pwm1: pwm@20050010 {
+		compatible = "rockchip,rk3036-pwm", "rockchip,rk2928-pwm";
+		reg = <0x20050010 0x10>;
+		#pwm-cells = <3>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm1_pin>;
+		clocks = <&cru PCLK_PWM>;
+		clock-names = "pwm";
+		status = "disabled";
+	};
+
+	pwm2: pwm@20050020 {
+		compatible = "rockchip,rk3036-pwm", "rockchip,rk2928-pwm";
+		reg = <0x20050020 0x10>;
+		#pwm-cells = <3>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm2_pin>;
+		clocks = <&cru PCLK_PWM>;
+		clock-names = "pwm";
+		status = "disabled";
+	};
+
+	pwm3: pwm@20050030 {
+		compatible = "rockchip,rk3036-pwm", "rockchip,rk2928-pwm";
+		reg = <0x20050030 0x10>;
+		#pwm-cells = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm3_pin>;
+		clocks = <&cru PCLK_PWM>;
+		clock-names = "pwm";
+		status = "disabled";
+	};
+
+	i2c1: i2c@20056000 {
+		compatible = "rockchip,rk3288-i2c";
+		reg = <0x20056000 0x1000>;
+		interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "i2c";
+		clocks = <&cru PCLK_I2C1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c1_xfer>;
+		status = "disabled";
+	};
+
+	uart0: serial@20060000 {
+		compatible = "rockchip,rk3036-uart", "snps,dw-apb-uart";
+		reg = <0x20060000 0x100>;
+		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		clock-frequency = <24000000>;
+		clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
+		clock-names = "baudclk", "apb_pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+		status = "disabled";
+	};
+
+	uart1: serial@20064000 {
+		compatible = "rockchip,rk3036-uart", "snps,dw-apb-uart";
+		reg = <0x20064000 0x100>;
+		interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		clock-frequency = <24000000>;
+		clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
+		clock-names = "baudclk", "apb_pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart1_xfer>;
+		status = "disabled";
+	};
+
+	uart2: serial@20068000 {
+		compatible = "rockchip,rk3036-uart", "snps,dw-apb-uart";
+		reg = <0x20068000 0x100>;
+		interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		clock-frequency = <24000000>;
+		clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
+		clock-names = "baudclk", "apb_pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart2_xfer>;
+		status = "disabled";
+	};
+
+	pinctrl: pinctrl {
+		compatible = "rockchip,rk3036-pinctrl";
+		rockchip,grf = <&grf>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		gpio0: gpio0@2007c000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x2007c000 0x100>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO0>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio1: gpio1@20080000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x20080000 0x100>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO1>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio2: gpio2@20084000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x20084000 0x100>;
+			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_GPIO2>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		pcfg_pull_up: pcfg-pull-up {
+			bias-pull-up;
+		};
+
+		pcfg_pull_down: pcfg-pull-down {
+			bias-pull-down;
+		};
+
+		pcfg_pull_none: pcfg-pull-none {
+			bias-disable;
+		};
+
+		pwm0 {
+			pwm0_pin: pwm0-pin {
+				rockchip,pins = <0 0 RK_FUNC_2 &pcfg_pull_none>;
+			};
+		};
+
+		pwm1 {
+			pwm1_pin: pwm1-pin {
+				rockchip,pins = <0 1 RK_FUNC_2 &pcfg_pull_none>;
+			};
+		};
+
+		pwm2 {
+			pwm2_pin: pwm2-pin {
+				rockchip,pins = <0 1 2 &pcfg_pull_none>;
+			};
+		};
+
+		pwm3 {
+			pwm3_pin: pwm3-pin {
+				rockchip,pins = <0 27 1 &pcfg_pull_none>;
+			};
+		};
+
+		i2c1 {
+			i2c1_xfer: i2c1-xfer {
+				rockchip,pins = <0 2 RK_FUNC_1 &pcfg_pull_none>,
+						<0 3 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		uart0 {
+			uart0_xfer: uart0-xfer {
+				rockchip,pins = <0 16 RK_FUNC_1 &pcfg_pull_up>,
+						<0 17 RK_FUNC_1 &pcfg_pull_none>;
+			};
+
+			uart0_cts: uart0-cts {
+				rockchip,pins = <0 18 RK_FUNC_1 &pcfg_pull_up>;
+			};
+
+			uart0_rts: uart0-rts {
+				rockchip,pins = <0 19 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
+		uart1 {
+			uart1_xfer: uart1-xfer {
+				rockchip,pins = <2 22 RK_FUNC_1 &pcfg_pull_none>,
+						<2 23 RK_FUNC_1 &pcfg_pull_none>;
+			};
+			/* no rts / cts for uart1 */
+		};
+
+		uart2 {
+			uart2_xfer: uart2-xfer {
+				rockchip,pins = <1 18 RK_FUNC_2 &pcfg_pull_none>,
+						<1 19 RK_FUNC_2 &pcfg_pull_none>;
+			};
+			/* no rts / cts for uart2 */
+		};
+	};
+};
-- 
1.7.9.5

[PATCH v3 2/8] clk: rockchip: add dt-binding header for rk3036

[Xing Zheng]

Add the dt-bindings header for the rk3036, that gets shared between
the clock controller and the clock references in the dts.

Signed-off-by: Xing Zheng <zhengxing-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
Reviewed-by: Heiko Stuebner <heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org>
---

Changes in v3: None

 include/dt-bindings/clock/rk3036-cru.h |  195 ++++++++++++++++++++++++++++++++
 1 file changed, 195 insertions(+)
 create mode 100644 include/dt-bindings/clock/rk3036-cru.h

diff --git a/include/dt-bindings/clock/rk3036-cru.h b/include/dt-bindings/clock/rk3036-cru.h
new file mode 100644
index 0000000..6e30af4
--- /dev/null
+++ b/include/dt-bindings/clock/rk3036-cru.h
@@ -0,0 +1,195 @@
+/*
+ * Copyright (c) 2015 Rockchip Electronics Co. Ltd.
+ * Author: Xing Zheng <zhengxing-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _DT_BINDINGS_CLK_ROCKCHIP_RK3036_H
+#define _DT_BINDINGS_CLK_ROCKCHIP_RK3036_H
+
+/* core clocks */
+#define PLL_APLL		1
+#define PLL_DPLL		2
+#define PLL_GPLL		3
+#define ARMCLK			4
+
+/* sclk gates (special clocks) */
+#define SCLK_GPU		64
+#define SCLK_SPI		65
+#define SCLK_SDMMC		68
+#define SCLK_SDIO		69
+#define SCLK_EMMC		71
+#define SCLK_NANDC		76
+#define SCLK_UART0		77
+#define SCLK_UART1		78
+#define SCLK_UART2		79
+#define SCLK_I2S		82
+#define SCLK_SPDIF		83
+#define SCLK_TIMER0		85
+#define SCLK_TIMER1		86
+#define SCLK_TIMER2		87
+#define SCLK_TIMER3		88
+#define SCLK_OTGPHY0		93
+#define SCLK_OTGPHY1		94
+#define SCLK_LCDC		100
+#define SCLK_HDMI		109
+#define SCLK_HEVC		111
+#define SCLK_I2S_OUT		113
+#define SCLK_SDMMC_DRV		114
+#define SCLK_SDIO_DRV		115
+#define SCLK_EMMC_DRV		117
+#define SCLK_SDMMC_SAMPLE	118
+#define SCLK_SDIO_SAMPLE	119
+#define SCLK_EMMC_SAMPLE	121
+#define SCLK_PVTM_CORE          123
+#define SCLK_PVTM_GPU           124
+#define SCLK_PVTM_VIDEO         125
+#define SCLK_MAC		151
+#define SCLK_MACREF		152
+#define SCLK_SFC		160
+
+#define DCLK_LCDC		190
+
+/* aclk gates */
+#define ACLK_DMAC2		194
+#define ACLK_LCDC		197
+#define ACLK_VIO		203
+#define ACLK_VCODEC		208
+#define ACLK_CPU		209
+#define ACLK_PERI		210
+
+/* pclk gates */
+#define PCLK_GPIO0		320
+#define PCLK_GPIO1		321
+#define PCLK_GPIO2		322
+#define PCLK_GRF		329
+#define PCLK_I2C0		332
+#define PCLK_I2C1		333
+#define PCLK_I2C2		334
+#define PCLK_SPI		338
+#define PCLK_UART0		341
+#define PCLK_UART1		342
+#define PCLK_UART2		343
+#define PCLK_PWM		350
+#define PCLK_TIMER		353
+#define PCLK_HDMI		360
+#define PCLK_CPU		362
+#define PCLK_PERI		363
+#define PCLK_DDRUPCTL		364
+#define PCLK_WDT		368
+
+/* hclk gates */
+#define HCLK_OTG0		449
+#define HCLK_OTG1		450
+#define HCLK_NANDC		453
+#define HCLK_SDMMC		456
+#define HCLK_SDIO		457
+#define HCLK_EMMC		459
+#define HCLK_I2S		462
+#define HCLK_LCDC		465
+#define HCLK_ROM		467
+#define HCLK_VIO_BUS		472
+#define HCLK_VCODEC		476
+#define HCLK_CPU		477
+#define HCLK_PERI		478
+
+#define CLK_NR_CLKS		(HCLK_PERI + 1)
+
+/* soft-reset indices */
+#define SRST_CORE0		0
+#define SRST_CORE1		1
+#define SRST_CORE0_DBG		4
+#define SRST_CORE1_DBG		5
+#define SRST_CORE0_POR		8
+#define SRST_CORE1_POR		9
+#define SRST_L2C		12
+#define SRST_TOPDBG		13
+#define SRST_STRC_SYS_A		14
+#define SRST_PD_CORE_NIU	15
+
+#define SRST_TIMER2		16
+#define SRST_CPUSYS_H		17
+#define SRST_AHB2APB_H		19
+#define SRST_TIMER3		20
+#define SRST_INTMEM		21
+#define SRST_ROM		22
+#define SRST_PERI_NIU		23
+#define SRST_I2S		24
+#define SRST_DDR_PLL		25
+#define SRST_GPU_DLL		26
+#define SRST_TIMER0		27
+#define SRST_TIMER1		28
+#define SRST_CORE_DLL		29
+#define SRST_EFUSE_P		30
+#define SRST_ACODEC_P		31
+
+#define SRST_GPIO0		32
+#define SRST_GPIO1		33
+#define SRST_GPIO2		34
+#define SRST_UART0		39
+#define SRST_UART1		40
+#define SRST_UART2		41
+#define SRST_I2C0		43
+#define SRST_I2C1		44
+#define SRST_I2C2		45
+#define SRST_SFC		47
+
+#define SRST_PWM0		48
+#define SRST_DAP		51
+#define SRST_DAP_SYS		52
+#define SRST_GRF		55
+#define SRST_PERIPHSYS_A	57
+#define SRST_PERIPHSYS_H	58
+#define SRST_PERIPHSYS_P	59
+#define SRST_CPU_PERI		61
+#define SRST_EMEM_PERI		62
+#define SRST_USB_PERI		63
+
+#define SRST_DMA2		64
+#define SRST_MAC		66
+#define SRST_NANDC		68
+#define SRST_USBOTG0		69
+#define SRST_OTGC0		71
+#define SRST_USBOTG1		72
+#define SRST_OTGC1		74
+#define SRST_DDRMSCH		79
+
+#define SRST_MMC0		81
+#define SRST_SDIO		82
+#define SRST_EMMC		83
+#define SRST_SPI0		84
+#define SRST_WDT		86
+#define SRST_DDRPHY		88
+#define SRST_DDRPHY_P		89
+#define SRST_DDRCTRL		90
+#define SRST_DDRCTRL_P		91
+
+#define SRST_HDMI_P		96
+#define SRST_VIO_BUS_H		99
+#define SRST_UTMI0		103
+#define SRST_UTMI1		104
+#define SRST_USBPOR		105
+
+#define SRST_VCODEC_A		112
+#define SRST_VCODEC_H		113
+#define SRST_VIO1_A		114
+#define SRST_HEVC		115
+#define SRST_VCODEC_NIU_A	116
+#define SRST_LCDC1_A		117
+#define SRST_LCDC1_H		118
+#define SRST_LCDC1_D		119
+#define SRST_GPU		120
+#define SRST_GPU_NIU_A		122
+
+#define SRST_DBG_P		131
+
+#endif
-- 
1.7.9.5


--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v3 3/8] clk: rockchip: add clock controller for rk3036

[Xing Zheng]

Add the clock tree definition for the new rk3036 SoC.

Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
---

Changes in v3: None

 drivers/clk/rockchip/Makefile          |    1 +
 drivers/clk/rockchip/clk-rk3036.c      |  500 ++++++++++++++++++++++++++++++++
 drivers/clk/rockchip/clk.h             |   30 ++
 include/dt-bindings/clock/rk3036-cru.h |    2 +-
 4 files changed, 532 insertions(+), 1 deletion(-)
 create mode 100644 drivers/clk/rockchip/clk-rk3036.c

diff --git a/drivers/clk/rockchip/Makefile b/drivers/clk/rockchip/Makefile
index b27edd6..d599829 100644
--- a/drivers/clk/rockchip/Makefile
+++ b/drivers/clk/rockchip/Makefile
@@ -10,6 +10,7 @@ obj-y	+= clk-inverter.o
 obj-y	+= clk-mmc-phase.o
 obj-$(CONFIG_RESET_CONTROLLER)	+= softrst.o
 
+obj-y	+= clk-rk3036.o
 obj-y	+= clk-rk3188.o
 obj-y	+= clk-rk3288.o
 obj-y	+= clk-rk3368.o
diff --git a/drivers/clk/rockchip/clk-rk3036.c b/drivers/clk/rockchip/clk-rk3036.c
new file mode 100644
index 0000000..6f49df3
--- /dev/null
+++ b/drivers/clk/rockchip/clk-rk3036.c
@@ -0,0 +1,500 @@
+/*
+ * Copyright (c) 2014 MundoReader S.L.
+ * Author: Heiko Stuebner <heiko@sntech.de>
+ *
+ * Copyright (c) 2015 Rockchip Electronics Co. Ltd.
+ * Author: Xing Zheng <zhengxing@rock-chips.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/syscore_ops.h>
+#include <dt-bindings/clock/rk3036-cru.h>
+#include "clk.h"
+
+#define RK3036_GRF_SOC_STATUS0	0x14c
+
+enum rk3036_plls {
+	apll, dpll, gpll,
+};
+
+static struct rockchip_pll_rate_table rk3036_pll_rates[] = {
+	/* _mhz, _refdiv, _fbdiv, _postdiv1, _postdiv2, _dsmpd, _frac */
+	RK3036_PLL_RATE(1608000000, 1, 67, 1, 1, 1, 0),
+	RK3036_PLL_RATE(1584000000, 1, 66, 1, 1, 1, 0),
+	RK3036_PLL_RATE(1560000000, 1, 65, 1, 1, 1, 0),
+	RK3036_PLL_RATE(1536000000, 1, 64, 1, 1, 1, 0),
+	RK3036_PLL_RATE(1512000000, 1, 63, 1, 1, 1, 0),
+	RK3036_PLL_RATE(1488000000, 1, 62, 1, 1, 1, 0),
+	RK3036_PLL_RATE(1464000000, 1, 61, 1, 1, 1, 0),
+	RK3036_PLL_RATE(1440000000, 1, 60, 1, 1, 1, 0),
+	RK3036_PLL_RATE(1416000000, 1, 59, 1, 1, 1, 0),
+	RK3036_PLL_RATE(1392000000, 1, 58, 1, 1, 1, 0),
+	RK3036_PLL_RATE(1368000000, 1, 57, 1, 1, 1, 0),
+	RK3036_PLL_RATE(1344000000, 1, 56, 1, 1, 1, 0),
+	RK3036_PLL_RATE(1320000000, 1, 55, 1, 1, 1, 0),
+	RK3036_PLL_RATE(1296000000, 1, 54, 1, 1, 1, 0),
+	RK3036_PLL_RATE(1272000000, 1, 53, 1, 1, 1, 0),
+	RK3036_PLL_RATE(1248000000, 1, 52, 1, 1, 1, 0),
+	RK3036_PLL_RATE(1200000000, 1, 50, 1, 1, 1, 0),
+	RK3036_PLL_RATE(1188000000, 2, 99, 1, 1, 1, 0),
+	RK3036_PLL_RATE(1104000000, 1, 46, 1, 1, 1, 0),
+	RK3036_PLL_RATE(1100000000, 12, 550, 1, 1, 1, 0),
+	RK3036_PLL_RATE(1008000000, 1, 84, 2, 1, 1, 0),
+	RK3036_PLL_RATE(1000000000, 6, 500, 2, 1, 1, 0),
+	RK3036_PLL_RATE( 984000000, 1, 82, 2, 1, 1, 0),
+	RK3036_PLL_RATE( 960000000, 1, 80, 2, 1, 1, 0),
+	RK3036_PLL_RATE( 936000000, 1, 78, 2, 1, 1, 0),
+	RK3036_PLL_RATE( 912000000, 1, 76, 2, 1, 1, 0),
+	RK3036_PLL_RATE( 900000000, 4, 300, 2, 1, 1, 0),
+	RK3036_PLL_RATE( 888000000, 1, 74, 2, 1, 1, 0),
+	RK3036_PLL_RATE( 864000000, 1, 72, 2, 1, 1, 0),
+	RK3036_PLL_RATE( 840000000, 1, 70, 2, 1, 1, 0),
+	RK3036_PLL_RATE( 816000000, 1, 68, 2, 1, 1, 0),
+	RK3036_PLL_RATE( 800000000, 6, 400, 2, 1, 1, 0),
+	RK3036_PLL_RATE( 700000000, 6, 350, 2, 1, 1, 0),
+	RK3036_PLL_RATE( 696000000, 1, 58, 2, 1, 1, 0),
+	RK3036_PLL_RATE( 600000000, 1, 75, 3, 1, 1, 0),
+	RK3036_PLL_RATE( 594000000, 2, 99, 2, 1, 1, 0),
+	RK3036_PLL_RATE( 504000000, 1, 63, 3, 1, 1, 0),
+	RK3036_PLL_RATE( 500000000, 6, 250, 2, 1, 1, 0),
+	RK3036_PLL_RATE( 408000000, 1, 68, 2, 2, 1, 0),
+	RK3036_PLL_RATE( 312000000, 1, 52, 2, 2, 1, 0),
+	RK3036_PLL_RATE( 216000000, 1, 72, 4, 2, 1, 0),
+	RK3036_PLL_RATE(  96000000, 1, 64, 4, 4, 1, 0),
+	{ /* sentinel */ },
+};
+
+#define RK3036_DIV_CPU_MASK		0x1f
+#define RK3036_DIV_CPU_SHIFT		8
+
+#define RK3036_DIV_PERI_MASK		0xf
+#define RK3036_DIV_PERI_SHIFT		0
+#define RK3036_DIV_ACLK_MASK		0x7
+#define RK3036_DIV_ACLK_SHIFT		4
+#define RK3036_DIV_HCLK_MASK		0x3
+#define RK3036_DIV_HCLK_SHIFT		8
+#define RK3036_DIV_PCLK_MASK		0x7
+#define RK3036_DIV_PCLK_SHIFT		12
+
+#define RK3036_CLKSEL1(_core_periph_div)					\
+	{									\
+		.reg = RK2928_CLKSEL_CON(1),					\
+		.val = HIWORD_UPDATE(_core_periph_div, RK3036_DIV_PERI_MASK,	\
+				RK3036_DIV_PERI_SHIFT)				\
+	}
+
+#define RK3036_CPUCLK_RATE(_prate, _core_periph_div)			\
+	{								\
+		.prate = _prate,					\
+		.divs = {						\
+			RK3036_CLKSEL1(_core_periph_div),		\
+		},							\
+	}
+
+static struct rockchip_cpuclk_rate_table rk3036_cpuclk_rates[] __initdata = {
+	RK3036_CPUCLK_RATE(816000000, 4),
+	RK3036_CPUCLK_RATE(600000000, 4),
+	RK3036_CPUCLK_RATE(312000000, 4),
+};
+
+static const struct rockchip_cpuclk_reg_data rk3036_cpuclk_data = {
+	.core_reg = RK2928_CLKSEL_CON(0),
+	.div_core_shift = 0,
+	.div_core_mask = 0x1f,
+	.mux_core_shift = 7,
+};
+
+PNAME(mux_pll_p)		= { "xin24m", "xin24m" };
+
+PNAME(mux_armclk_p)		= { "apll", "gpll_armclk" };
+PNAME(mux_busclk_p)		= { "apll", "dpll_cpu", "gpll_cpu" };
+PNAME(mux_ddrphy_p)		= { "dpll_ddr", "gpll_ddr" };
+PNAME(mux_pll_src_3plls_p)	= { "apll", "dpll", "gpll" };
+PNAME(mux_timer_p)		= { "xin24m", "pclk_peri_src" };
+
+PNAME(mux_pll_src_apll_dpll_gpll_usb480m_p)	= { "apll", "dpll", "gpll" "usb480m" };
+
+PNAME(mux_mmc_src_p)	= { "apll", "dpll", "gpll", "xin24m" };
+PNAME(mux_i2s_pre_p)	= { "i2s_src", "i2s_frac", "ext_i2s", "xin12m" };
+PNAME(mux_i2s_clkout_p)	= { "i2s_pre", "xin12m" };
+PNAME(mux_spdif_p)	= { "spdif_src", "spdif_frac", "xin12m" };
+PNAME(mux_uart0_p)	= { "uart0_src", "uart0_frac", "xin24m" };
+PNAME(mux_uart1_p)	= { "uart1_src", "uart1_frac", "xin24m" };
+PNAME(mux_uart2_p)	= { "uart2_src", "uart2_frac", "xin24m" };
+PNAME(mux_mac_p)	= { "mac_pll_src", "ext_gmac" };
+PNAME(mux_dclk_p)	= { "dclk_lcdc", "dclk_hdmi_src" };
+
+static struct rockchip_pll_clock rk3036_pll_clks[] __initdata = {
+	[apll] = PLL(pll_rk3036, PLL_APLL, "apll", mux_pll_p, 0, RK2928_PLL_CON(0),
+		     RK2928_MODE_CON, 0, 5, 0, rk3036_pll_rates),
+	[dpll] = PLL(pll_rk3036, PLL_DPLL, "dpll", mux_pll_p, 0, RK2928_PLL_CON(4),
+		     RK2928_MODE_CON, 4, 4, 0, NULL),
+	[gpll] = PLL(pll_rk3036, PLL_GPLL, "gpll", mux_pll_p, 0, RK2928_PLL_CON(12),
+		     RK2928_MODE_CON, 12, 6, ROCKCHIP_PLL_SYNC_RATE, rk3036_pll_rates),
+};
+
+#define MFLAGS CLK_MUX_HIWORD_MASK
+#define DFLAGS CLK_DIVIDER_HIWORD_MASK
+#define GFLAGS (CLK_GATE_HIWORD_MASK | CLK_GATE_SET_TO_DISABLE)
+
+static struct rockchip_clk_branch rk3036_clk_branches[] __initdata = {
+	/*
+	 * Clock-Architecture Diagram 1
+	 */
+
+	/* PD_CORE */
+	GATE(0, "gpll_armclk", "gpll", CLK_IGNORE_UNUSED,
+			RK2928_CLKGATE_CON(0), 6, GFLAGS),
+
+	/*
+	 * Clock-Architecture Diagram 2
+	 */
+
+	/* PD_DDR */
+	GATE(0, "dpll_ddr", "dpll", CLK_IGNORE_UNUSED,
+			RK2928_CLKGATE_CON(0), 2, GFLAGS),
+	GATE(0, "gpll_ddr", "gpll", CLK_IGNORE_UNUSED,
+			RK2928_CLKGATE_CON(0), 8, GFLAGS),
+	COMPOSITE_NOGATE(0, "ddrphy2x", mux_ddrphy_p, CLK_IGNORE_UNUSED,
+			RK2928_CLKSEL_CON(26), 8, 1, MFLAGS, 0, 2, DFLAGS | CLK_DIVIDER_POWER_OF_TWO),
+
+	/* PD_CORE */
+	COMPOSITE_NOMUX(0, "pclk_dbg", "armclk", CLK_IGNORE_UNUSED,
+			RK2928_CLKSEL_CON(1), 0, 4, DFLAGS | CLK_DIVIDER_READ_ONLY,
+			RK2928_CLKGATE_CON(0), 7, GFLAGS),
+	COMPOSITE_NOMUX(0, "aclk_core_pre", "armclk", CLK_IGNORE_UNUSED,
+			RK2928_CLKSEL_CON(1), 4, 3, DFLAGS | CLK_DIVIDER_READ_ONLY,
+			RK2928_CLKGATE_CON(0), 7, GFLAGS),
+
+	/* PD_CPU (BUS) */
+	GATE(0, "dpll_cpu", "dpll", 0, RK2928_CLKGATE_CON(10), 8, GFLAGS),
+	GATE(0, "gpll_cpu", "gpll", 0, RK2928_CLKGATE_CON(0), 1, GFLAGS),
+	COMPOSITE_NOGATE(0, "aclk_cpu_src", mux_busclk_p, 0,
+			RK2928_CLKSEL_CON(0), 14, 2, MFLAGS, 8, 5, DFLAGS),
+	GATE(ACLK_CPU, "aclk_cpu", "aclk_cpu_src", CLK_IGNORE_UNUSED,
+			RK2928_CLKGATE_CON(0), 3, GFLAGS),
+	COMPOSITE_NOMUX(PCLK_CPU, "pclk_cpu", "aclk_cpu_src", CLK_IGNORE_UNUSED,
+			RK2928_CLKSEL_CON(1), 12, 3, DFLAGS | CLK_DIVIDER_READ_ONLY,
+			RK2928_CLKGATE_CON(0), 5, GFLAGS),
+	COMPOSITE_NOMUX(HCLK_CPU, "hclk_cpu", "aclk_cpu_src", CLK_IGNORE_UNUSED,
+			RK2928_CLKSEL_CON(1), 8, 2, DFLAGS | CLK_DIVIDER_READ_ONLY,
+			RK2928_CLKGATE_CON(0), 4, GFLAGS),
+
+	/* PD_PERI */
+	COMPOSITE(0, "aclk_peri_src", mux_pll_src_3plls_p, 0,
+			RK2928_CLKSEL_CON(10), 14, 2, MFLAGS, 0, 5, DFLAGS,
+			RK2928_CLKGATE_CON(2), 0, GFLAGS),
+
+	GATE(ACLK_PERI, "aclk_peri", "aclk_peri_src", 0,
+			RK2928_CLKGATE_CON(2), 1, GFLAGS),
+	/* pclk_peri_src is soure for timers */
+	DIV(0, "pclk_peri_src", "aclk_peri_src", CLK_IGNORE_UNUSED,
+			RK2928_CLKSEL_CON(10), 12, 2, DFLAGS | CLK_DIVIDER_POWER_OF_TWO),
+	GATE(PCLK_PERI, "pclk_peri", "pclk_peri_src", 0,
+			RK2928_CLKGATE_CON(2), 3, GFLAGS),
+	/* hclk_peri_src is soure for sclk_macref_out */
+	DIV(0, "hclk_peri_src", "aclk_peri_src", CLK_IGNORE_UNUSED,
+			RK2928_CLKSEL_CON(10), 8, 2, DFLAGS | CLK_DIVIDER_POWER_OF_TWO),
+	GATE(HCLK_PERI, "hclk_peri", "hclk_peri_src", 0,
+			RK2928_CLKGATE_CON(2), 2, GFLAGS),
+
+	/* PD_TIMER */
+	COMPOSITE_NODIV(SCLK_TIMER0, "sclk_timer0", mux_timer_p, CLK_IGNORE_UNUSED,
+			RK2928_CLKSEL_CON(2), 4, 1, DFLAGS,
+			RK2928_CLKGATE_CON(1), 0, GFLAGS),
+	COMPOSITE_NODIV(SCLK_TIMER1, "sclk_timer1", mux_timer_p, CLK_IGNORE_UNUSED,
+			RK2928_CLKSEL_CON(2), 5, 1, DFLAGS,
+			RK2928_CLKGATE_CON(1), 1, GFLAGS),
+	COMPOSITE_NODIV(SCLK_TIMER2, "sclk_timer2", mux_timer_p, CLK_IGNORE_UNUSED,
+			RK2928_CLKSEL_CON(2), 6, 1, DFLAGS,
+			RK2928_CLKGATE_CON(2), 4, GFLAGS),
+	COMPOSITE_NODIV(SCLK_TIMER3, "sclk_timer3", mux_timer_p, CLK_IGNORE_UNUSED,
+			RK2928_CLKSEL_CON(2), 7, 1, DFLAGS,
+			RK2928_CLKGATE_CON(2), 5, GFLAGS),
+
+	/* PD_UART */
+	MUX(0, "uart_pll_clk", mux_pll_src_apll_dpll_gpll_usb480m_p, 0,
+			RK2928_CLKSEL_CON(13), 10, 2, MFLAGS),
+	COMPOSITE_NOMUX(0, "uart0_src", "uart_pll_clk", 0,
+			RK2928_CLKSEL_CON(13), 0, 7, DFLAGS,
+			RK2928_CLKGATE_CON(1), 8, GFLAGS),
+	COMPOSITE_NOMUX(0, "uart1_src", "uart_pll_clk", 0,
+			RK2928_CLKSEL_CON(13), 0, 7, DFLAGS,
+			RK2928_CLKGATE_CON(1), 8, GFLAGS),
+	COMPOSITE_NOMUX(0, "uart2_src", "uart_pll_clk", 0,
+			RK2928_CLKSEL_CON(13), 0, 7, DFLAGS,
+			RK2928_CLKGATE_CON(1), 8, GFLAGS),
+	COMPOSITE_FRAC(0, "uart0_frac", "uart0_src", CLK_SET_RATE_PARENT,
+			RK2928_CLKSEL_CON(17), 0,
+			RK2928_CLKGATE_CON(1), 9, GFLAGS),
+	COMPOSITE_FRAC(0, "uart1_frac", "uart1_src", CLK_SET_RATE_PARENT,
+			RK2928_CLKSEL_CON(18), 0,
+			RK2928_CLKGATE_CON(1), 11, GFLAGS),
+	COMPOSITE_FRAC(0, "uart2_frac", "uart2_src", CLK_SET_RATE_PARENT,
+			RK2928_CLKSEL_CON(19), 0,
+			RK2928_CLKGATE_CON(1), 13, GFLAGS),
+	MUX(SCLK_UART0, "sclk_uart0", mux_uart0_p, CLK_SET_RATE_PARENT,
+			RK2928_CLKSEL_CON(13), 8, 2, MFLAGS),
+	MUX(SCLK_UART1, "sclk_uart1", mux_uart1_p, CLK_SET_RATE_PARENT,
+			RK2928_CLKSEL_CON(14), 8, 2, MFLAGS),
+	MUX(SCLK_UART2, "sclk_uart2", mux_uart2_p, CLK_SET_RATE_PARENT,
+			RK2928_CLKSEL_CON(15), 8, 2, MFLAGS),
+
+	/* PD_VIDEO */
+	COMPOSITE(0, "aclk_vcodec", mux_pll_src_3plls_p, 0,
+			RK2928_CLKSEL_CON(32), 14, 2, MFLAGS, 8, 5, DFLAGS,
+			RK2928_CLKGATE_CON(3), 11, GFLAGS),
+
+	COMPOSITE(0, "aclk_hvec", mux_pll_src_3plls_p, 0,
+			RK2928_CLKSEL_CON(20), 0, 2, MFLAGS, 2, 5, DFLAGS,
+			RK2928_CLKGATE_CON(10), 6, GFLAGS),
+
+	/* PD_VIO */
+	COMPOSITE(0, "aclk_disp1_pre", mux_pll_src_3plls_p, 0,
+			RK2928_CLKSEL_CON(31), 14, 2, MFLAGS, 8, 5, DFLAGS,
+			RK2928_CLKGATE_CON(1), 4, GFLAGS),
+	COMPOSITE(0, "hclk_disp_pre", mux_pll_src_3plls_p, 0,
+			RK2928_CLKSEL_CON(30), 14, 2, MFLAGS, 8, 5, DFLAGS,
+			RK2928_CLKGATE_CON(0), 11, GFLAGS),
+	COMPOSITE(DCLK_LCDC, "dclk_lcdc", mux_pll_src_3plls_p, 0,
+			RK2928_CLKSEL_CON(28), 0, 2, MFLAGS, 8, 8, DFLAGS,
+			RK2928_CLKGATE_CON(3), 2, GFLAGS),
+
+	/* MMC */
+	COMPOSITE_NODIV(0, "sclk_sdmmc_src", mux_mmc_src_p, 0,
+			RK2928_CLKSEL_CON(12), 8, 2, DFLAGS,
+			RK2928_CLKGATE_CON(2), 11, GFLAGS),
+	DIV(SCLK_SDMMC, "sclk_sdmmc", "sclk_sdmmc_src", 0,
+			RK2928_CLKSEL_CON(11), 0, 7, DFLAGS),
+
+	COMPOSITE_NODIV(0, "sclk_sdio_src", mux_mmc_src_p, 0,
+			RK2928_CLKSEL_CON(12), 10, 2, DFLAGS,
+			RK2928_CLKGATE_CON(2), 13, GFLAGS),
+	DIV(SCLK_SDIO, "sclk_sdio", "sclk_sdio_src", 0,
+			RK2928_CLKSEL_CON(11), 8, 7, DFLAGS),
+
+	COMPOSITE(SCLK_EMMC, "sclk_emmc", mux_mmc_src_p, 0,
+			RK2928_CLKSEL_CON(12), 12, 2, MFLAGS, 0, 7, DFLAGS,
+			RK2928_CLKGATE_CON(2), 14, GFLAGS),
+
+	MMC(SCLK_SDMMC_DRV,    "sdmmc_drv",    "sclk_sdmmc", RK3036_SDMMC_CON0, 1),
+	MMC(SCLK_SDMMC_SAMPLE, "sdmmc_sample", "sclk_sdmmc", RK3036_SDMMC_CON1, 0),
+
+	MMC(SCLK_SDIO_DRV,     "sdio_drv",     "sclk_sdio",  RK3036_SDIO_CON0, 1),
+	MMC(SCLK_SDIO_SAMPLE,  "sdio_sample",  "sclk_sdio",  RK3036_SDIO_CON1, 0),
+
+	MMC(SCLK_EMMC_DRV,     "emmc_drv",     "sclk_emmc",  RK3036_EMMC_CON0,  1),
+	MMC(SCLK_EMMC_SAMPLE,  "emmc_sample",  "sclk_emmc",  RK3036_EMMC_CON1,  0),
+
+	/* I2S */
+	COMPOSITE(0, "i2s_src", mux_pll_src_3plls_p, 0,
+			RK2928_CLKSEL_CON(3), 14, 2, MFLAGS, 0, 7, DFLAGS,
+			RK2928_CLKGATE_CON(0), 9, GFLAGS),
+	COMPOSITE_FRAC(0, "i2s_frac", "i2s_src", CLK_SET_RATE_PARENT,
+			RK2928_CLKSEL_CON(7), 0,
+			RK2928_CLKGATE_CON(0), 10, GFLAGS),
+	MUX(0, "i2s_pre", mux_i2s_pre_p, CLK_SET_RATE_PARENT,
+			RK2928_CLKSEL_CON(3), 8, 2, MFLAGS),
+	COMPOSITE_NODIV(SCLK_I2S_OUT, "i2s_clkout", mux_i2s_clkout_p, 0,
+			RK2928_CLKSEL_CON(3), 12, 1, MFLAGS,
+			RK2928_CLKGATE_CON(0), 13, GFLAGS),
+	GATE(SCLK_I2S, "sclk_i2s", "i2s_pre", CLK_SET_RATE_PARENT,
+			RK2928_CLKGATE_CON(0), 14, GFLAGS),
+
+	/* SPDIF */
+	COMPOSITE(0, "spdif_src", mux_pll_src_3plls_p, 0,
+			RK2928_CLKSEL_CON(5), 10, 2, MFLAGS, 0, 7, DFLAGS,
+			RK2928_CLKGATE_CON(2), 10, GFLAGS),
+	COMPOSITE_FRAC(0, "spdif_frac", "spdif_src", 0,
+			RK2928_CLKSEL_CON(9), 0,
+			RK2928_CLKGATE_CON(2), 12, GFLAGS),
+	MUX(SCLK_SPDIF, "sclk_spdif", mux_spdif_p, 0,
+			RK2928_CLKSEL_CON(5), 8, 2, MFLAGS),
+
+	GATE(SCLK_OTGPHY0, "sclk_otgphy0", "xin12m", CLK_IGNORE_UNUSED,
+			RK2928_CLKGATE_CON(1), 5, GFLAGS),
+
+	COMPOSITE(SCLK_GPU, "sclk_gpu", mux_pll_src_3plls_p, 0,
+			RK2928_CLKSEL_CON(34), 8, 2, MFLAGS, 0, 5, DFLAGS,
+			RK2928_CLKGATE_CON(3), 13, GFLAGS),
+
+	COMPOSITE(SCLK_SPI, "sclk_spi", mux_pll_src_3plls_p, 0,
+			RK2928_CLKSEL_CON(25), 8, 2, MFLAGS, 0, 7, DFLAGS,
+			RK2928_CLKGATE_CON(2), 9, GFLAGS),
+
+	COMPOSITE(SCLK_NANDC, "sclk_nandc", mux_pll_src_3plls_p, 0,
+			RK2928_CLKSEL_CON(16), 8, 2, MFLAGS, 10, 5, DFLAGS,
+			RK2928_CLKGATE_CON(10), 4, GFLAGS),
+
+	COMPOSITE(SCLK_SFC, "sclk_sfc", mux_pll_src_apll_dpll_gpll_usb480m_p, 0,
+			RK2928_CLKSEL_CON(16), 0, 2, MFLAGS, 2, 5, DFLAGS,
+			RK2928_CLKGATE_CON(10), 5, GFLAGS),
+
+	COMPOSITE_NOGATE(0, "mac_pll_src", mux_pll_src_3plls_p, 0,
+			RK2928_CLKSEL_CON(21), 0, 2, MFLAGS, 4, 5, DFLAGS),
+	/* for clk_mac_ref & clk_mac_refout */
+	MUX(SCLK_MACREF, "mac_clk_ref", mux_mac_p, CLK_SET_RATE_PARENT,
+			RK2928_CLKSEL_CON(21), 3, 1, MFLAGS),
+
+	COMPOSITE_NOMUX(SCLK_MAC, "mac_clk", "mac_clk_ref", 0,
+			RK2928_CLKSEL_CON(21), 9, 5, DFLAGS,
+			RK2928_CLKGATE_CON(2), 6, GFLAGS),
+
+	/* HDMI */
+	/* total clks: pin_sys_clk / pin_sck / pin_mclk / pin_vclk / pin_vclk_pllref */
+	/* the same with dclk_lcdc */
+	COMPOSITE(0, "dclk_hdmi_src", mux_pll_src_3plls_p, 0,
+			RK2928_CLKSEL_CON(28), 0, 2, MFLAGS, 8, 8, DFLAGS,
+			RK2928_CLKGATE_CON(3), 2, GFLAGS),
+	/* hdmi dclk from dclk_lcdc directly */
+	MUX(SCLK_HDMI, "dclk_hdmi", mux_dclk_p, 0,
+			RK2928_CLKSEL_CON(31), 0, 1, MFLAGS),
+
+	/*
+	 * Clock-Architecture Diagram 3
+	 */
+
+	/* aclk_cpu gates */
+	GATE(0, "sclk_intmem", "aclk_cpu", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(4), 12, GFLAGS),
+	GATE(0, "aclk_strc_sys", "aclk_cpu", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(4), 10, GFLAGS),
+
+	/* hclk_cpu gates */
+	GATE(HCLK_ROM, "hclk_rom", "hclk_cpu", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(5), 6, GFLAGS),
+
+	/* pclk_cpu gates */
+	GATE(PCLK_GRF, "pclk_grf", "pclk_cpu", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(5), 4, GFLAGS),
+	GATE(PCLK_DDRUPCTL, "pclk_ddrupctl", "pclk_cpu", 0, RK2928_CLKGATE_CON(5), 7, GFLAGS),
+	GATE(PCLK_ACODEC, "pclk_acodec", "pclk_cpu", 0, RK2928_CLKGATE_CON(5), 14, GFLAGS),
+	GATE(PCLK_HDMI, "pclk_hdmi", "pclk_cpu", 0, RK2928_CLKGATE_CON(3), 8, GFLAGS),
+
+	/* aclk_vio gates */
+	GATE(ACLK_VIO, "aclk_vio", "aclk_disp1_pre", 0, RK2928_CLKGATE_CON(6), 13, GFLAGS),
+	GATE(ACLK_LCDC, "aclk_lcdc", "aclk_disp1_pre", 0, RK2928_CLKGATE_CON(9), 6, GFLAGS),
+
+	GATE(HCLK_VIO_BUS, "hclk_vio_bus", "hclk_disp_pre", 0, RK2928_CLKGATE_CON(6), 12, GFLAGS),
+	GATE(HCLK_LCDC, "hclk_lcdc", "hclk_disp_pre", 0, RK2928_CLKGATE_CON(9), 5, GFLAGS),
+
+	/* aclk_video gates */
+	GATE(HCLK_LCDC, "hclk_vcodec", "hclk_disp_pre", 0, RK2928_CLKGATE_CON(3), 12, GFLAGS),
+
+	/* xin24m gates */
+	GATE(SCLK_PVTM_CORE, "sclk_pvtm_core", "xin24m", 0, RK2928_CLKGATE_CON(10), 0, GFLAGS),
+	GATE(SCLK_PVTM_GPU, "sclk_pvtm_gpu", "xin24m", 0, RK2928_CLKGATE_CON(10), 1, GFLAGS),
+
+	/* aclk_peri gates */
+	GATE(0, "aclk_peri_axi_matrix", "aclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(4), 3, GFLAGS),
+	GATE(0, "aclk_cpu_peri", "aclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(4), 2, GFLAGS),
+	GATE(ACLK_DMAC2, "aclk_dmac2", "aclk_peri", 0, RK2928_CLKGATE_CON(5), 1, GFLAGS),
+	GATE(0, "aclk_peri_niu", "aclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(9), 15, GFLAGS),
+
+	/* hclk_peri gates */
+	GATE(0, "hclk_peri_matrix", "hclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(4), 0, GFLAGS),
+	GATE(0, "hclk_usb_peri", "hclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(9), 13, GFLAGS),
+	GATE(0, "hclk_peri_arbi", "hclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(9), 14, GFLAGS),
+	GATE(HCLK_NANDC, "hclk_nandc", "hclk_peri", 0, RK2928_CLKGATE_CON(5), 9, GFLAGS),
+	GATE(HCLK_SDMMC, "hclk_sdmmc", "hclk_peri", 0, RK2928_CLKGATE_CON(5), 10, GFLAGS),
+	GATE(HCLK_SDIO, "hclk_sdio", "hclk_peri", 0, RK2928_CLKGATE_CON(5), 11, GFLAGS),
+	GATE(HCLK_EMMC, "hclk_emmc", "hclk_peri", 0, RK2928_CLKGATE_CON(7), 0, GFLAGS),
+	GATE(HCLK_OTG0, "hclk_otg0", "hclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(5), 13, GFLAGS),
+	GATE(HCLK_OTG1, "hclk_otg1", "hclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(7), 3, GFLAGS),
+	GATE(HCLK_I2S, "hclk_i2s", "hclk_peri", 0, RK2928_CLKGATE_CON(7), 2, GFLAGS),
+	GATE(0, "hclk_sfc", "hclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(3), 14, GFLAGS),
+	GATE(0, "hclk_mac", "hclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(3), 15, GFLAGS),
+
+	/* pclk_peri gates */
+	GATE(0, "pclk_peri_matrix", "pclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(4), 1, GFLAGS),
+	GATE(0, "pclk_efuse", "pclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(5), 2, GFLAGS),
+	GATE(PCLK_TIMER, "pclk_timer0", "pclk_peri", 0, RK2928_CLKGATE_CON(7), 7, GFLAGS),
+	GATE(PCLK_PWM, "pclk_pwm", "pclk_peri", 0, RK2928_CLKGATE_CON(7), 10, GFLAGS),
+	GATE(PCLK_SPI, "pclk_spi", "pclk_peri", 0, RK2928_CLKGATE_CON(7), 12, GFLAGS),
+	GATE(PCLK_WDT, "pclk_wdt", "pclk_peri", 0, RK2928_CLKGATE_CON(7), 15, GFLAGS),
+	GATE(PCLK_UART0, "pclk_uart0", "pclk_peri", 0, RK2928_CLKGATE_CON(8), 0, GFLAGS),
+	GATE(PCLK_UART1, "pclk_uart1", "pclk_peri", 0, RK2928_CLKGATE_CON(8), 1, GFLAGS),
+	GATE(PCLK_UART2, "pclk_uart2", "pclk_peri", 0, RK2928_CLKGATE_CON(8), 2, GFLAGS),
+	GATE(PCLK_I2C0, "pclk_i2c0", "pclk_peri", 0, RK2928_CLKGATE_CON(8), 4, GFLAGS),
+	GATE(PCLK_I2C1, "pclk_i2c1", "pclk_peri", 0, RK2928_CLKGATE_CON(8), 5, GFLAGS),
+	GATE(PCLK_I2C2, "pclk_i2c2", "pclk_peri", 0, RK2928_CLKGATE_CON(8), 6, GFLAGS),
+	GATE(PCLK_GPIO0, "pclk_gpio0", "pclk_peri", 0, RK2928_CLKGATE_CON(8), 9, GFLAGS),
+	GATE(PCLK_GPIO1, "pclk_gpio1", "pclk_peri", 0, RK2928_CLKGATE_CON(8), 10, GFLAGS),
+	GATE(PCLK_GPIO2, "pclk_gpio2", "pclk_peri", 0, RK2928_CLKGATE_CON(8), 11, GFLAGS),
+};
+
+static const char *const rk3036_critical_clocks[] __initconst = {
+	"aclk_cpu",
+	"aclk_peri",
+	"hclk_peri",
+	"pclk_peri",
+};
+
+static void __init rk3036_clk_init(struct device_node *np)
+{
+	void __iomem *reg_base;
+	struct clk *clk;
+
+	reg_base = of_iomap(np, 0);
+	if (!reg_base) {
+		pr_err("%s: could not map cru region\n", __func__);
+		return;
+	}
+
+	rockchip_clk_init(np, reg_base, CLK_NR_CLKS);
+
+	/* xin12m is created by an cru-internal divider */
+	clk = clk_register_fixed_factor(NULL, "xin12m", "xin24m", 0, 1, 2);
+	if (IS_ERR(clk))
+		pr_warn("%s: could not register clock xin12m: %ld\n",
+			__func__, PTR_ERR(clk));
+
+	clk = clk_register_fixed_factor(NULL, "usb480m", "xin24m", 0, 20, 1);
+	if (IS_ERR(clk))
+		pr_warn("%s: could not register clock usb480m: %ld\n",
+			__func__, PTR_ERR(clk));
+
+	clk = clk_register_fixed_factor(NULL, "ddrphy", "ddrphy2x", 0, 1, 2);
+	if (IS_ERR(clk))
+		pr_warn("%s: could not register clock ddrphy: %ld\n",
+			__func__, PTR_ERR(clk));
+
+	clk = clk_register_fixed_factor(NULL, "hclk_vcodec_pre",
+					"aclk_vcodec", 0, 1, 4);
+	if (IS_ERR(clk))
+		pr_warn("%s: could not register clock hclk_vcodec_pre: %ld\n",
+			__func__, PTR_ERR(clk));
+
+	clk = clk_register_fixed_factor(NULL, "sclk_macref_out",
+					"hclk_peri_src", 0, 1, 2);
+	if (IS_ERR(clk))
+		pr_warn("%s: could not register clock sclk_macref_out: %ld\n",
+			__func__, PTR_ERR(clk));
+
+	rockchip_clk_register_plls(rk3036_pll_clks,
+				   ARRAY_SIZE(rk3036_pll_clks),
+				   RK3036_GRF_SOC_STATUS0);
+	rockchip_clk_register_branches(rk3036_clk_branches,
+				  ARRAY_SIZE(rk3036_clk_branches));
+	rockchip_clk_protect_critical(rk3036_critical_clocks,
+				      ARRAY_SIZE(rk3036_critical_clocks));
+
+	rockchip_clk_register_armclk(ARMCLK, "armclk",
+			mux_armclk_p, ARRAY_SIZE(mux_armclk_p),
+			&rk3036_cpuclk_data, rk3036_cpuclk_rates,
+			ARRAY_SIZE(rk3036_cpuclk_rates));
+
+	rockchip_register_softrst(np, 9, reg_base + RK2928_SOFTRST_CON(0),
+				  ROCKCHIP_SOFTRST_HIWORD_MASK);
+
+	rockchip_register_restart_notifier(RK2928_GLB_SRST_FST);
+}
+CLK_OF_DECLARE(rk3036_cru, "rockchip,rk3036-cru", rk3036_clk_init);
diff --git a/drivers/clk/rockchip/clk.h b/drivers/clk/rockchip/clk.h
index dc8ecb2..4b79f34 100644
--- a/drivers/clk/rockchip/clk.h
+++ b/drivers/clk/rockchip/clk.h
@@ -2,6 +2,9 @@
  * Copyright (c) 2014 MundoReader S.L.
  * Author: Heiko Stuebner <heiko@sntech.de>
  *
+ * Copyright (c) 2015 Rockchip Electronics Co. Ltd.
+ * Author: Xing Zheng <zhengxing@rock-chips.com>
+ *
  * based on
  *
  * samsung/clk.h
@@ -40,6 +43,13 @@ struct clk;
 #define RK2928_SOFTRST_CON(x)	((x) * 0x4 + 0x110)
 #define RK2928_MISC_CON		0x134
 
+#define RK3036_SDMMC_CON0		0x144
+#define RK3036_SDMMC_CON1		0x148
+#define RK3036_SDIO_CON0		0x14c
+#define RK3036_SDIO_CON1		0x150
+#define RK3036_EMMC_CON0		0x154
+#define RK3036_EMMC_CON1		0x158
+
 #define RK3288_PLL_CON(x)		RK2928_PLL_CON(x)
 #define RK3288_MODE_CON			0x50
 #define RK3288_CLKSEL_CON(x)		((x) * 0x4 + 0x60)
@@ -74,9 +84,22 @@ struct clk;
 #define RK3368_EMMC_CON1		0x41c
 
 enum rockchip_pll_type {
+	pll_rk3036,
 	pll_rk3066,
 };
 
+#define RK3036_PLL_RATE(_rate, _refdiv, _fbdiv, _postdiv1,	\
+			_postdiv2, _dsmpd, _frac)		\
+{								\
+	.rate	= _rate##U,					\
+	.fbdiv = _fbdiv,					\
+	.postdiv1 = _postdiv1,					\
+	.refdiv = _refdiv,					\
+	.postdiv2 = _postdiv2,					\
+	.dsmpd = _dsmpd,					\
+	.frac = _frac,						\
+}
+
 #define RK3066_PLL_RATE(_rate, _nr, _nf, _no)	\
 {						\
 	.rate	= _rate##U,			\
@@ -101,6 +124,13 @@ struct rockchip_pll_rate_table {
 	unsigned int nf;
 	unsigned int no;
 	unsigned int nb;
+	/* for RK3036 */
+	unsigned int fbdiv;
+	unsigned int postdiv1;
+	unsigned int refdiv;
+	unsigned int postdiv2;
+	unsigned int dsmpd;
+	unsigned int frac;
 };
 
 /**
diff --git a/include/dt-bindings/clock/rk3036-cru.h b/include/dt-bindings/clock/rk3036-cru.h
index 6e30af4..b0da216 100644
--- a/include/dt-bindings/clock/rk3036-cru.h
+++ b/include/dt-bindings/clock/rk3036-cru.h
@@ -39,7 +39,6 @@
 #define SCLK_TIMER2		87
 #define SCLK_TIMER3		88
 #define SCLK_OTGPHY0		93
-#define SCLK_OTGPHY1		94
 #define SCLK_LCDC		100
 #define SCLK_HDMI		109
 #define SCLK_HEVC		111
@@ -86,6 +85,7 @@
 #define PCLK_PERI		363
 #define PCLK_DDRUPCTL		364
 #define PCLK_WDT		368
+#define PCLK_ACODEC		369
 
 /* hclk gates */
 #define HCLK_OTG0		449
-- 
1.7.9.5

[PATCH v3 4/8] dt-bindings: add documentation of rk3036 clock controller

[Xing Zheng]

Add the devicetree binding for the cru on the rk3036 which quite similar
structured as previous clock controllers.

Signed-off-by: Xing Zheng <zhengxing-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
Reviewed-by: Heiko Stuebner <heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org>
---

Changes in v3: None

 .../bindings/clock/rockchip,rk3036-cru.txt         |   56 ++++++++++++++++++++
 1 file changed, 56 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/rockchip,rk3036-cru.txt

diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3036-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,rk3036-cru.txt
new file mode 100644
index 0000000..ace0599
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/rockchip,rk3036-cru.txt
@@ -0,0 +1,56 @@
+* Rockchip RK3036 Clock and Reset Unit
+
+The RK3036 clock controller generates and supplies clock to various
+controllers within the SoC and also implements a reset controller for SoC
+peripherals.
+
+Required Properties:
+
+- compatible: should be "rockchip,rk3036-cru"
+- reg: physical base address of the controller and length of memory mapped
+  region.
+- #clock-cells: should be 1.
+- #reset-cells: should be 1.
+
+Optional Properties:
+
+- rockchip,grf: phandle to the syscon managing the "general register files"
+  If missing pll rates are not changeable, due to the missing pll lock status.
+
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume. All available clocks are defined as
+preprocessor macros in the dt-bindings/clock/rk3036-cru.h headers and can be
+used in device tree sources. Similar macros exist for the reset sources in
+these files.
+
+External clocks:
+
+There are several clocks that are generated outside the SoC. It is expected
+that they are defined using standard clock bindings with following
+clock-output-names:
+ - "xin24m" - crystal input - required,
+ - "ext_i2s" - external I2S clock - optional,
+ - "ext_gmac" - external GMAC clock - optional
+
+Example: Clock controller node:
+
+	cru: cru@20000000 {
+		compatible = "rockchip,rk3036-cru";
+		reg = <0x20000000 0x1000>;
+		rockchip,grf = <&grf>;
+
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+Example: UART controller node that consumes the clock generated by the clock
+  controller:
+
+	uart0: serial@20060000 {
+		compatible = "snps,dw-apb-uart";
+		reg = <0x20060000 0x100>;
+		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		clocks = <&cru SCLK_UART0>;
+	};
-- 
1.7.9.5

[PATCH v3 7/8] ARM: dts: enable smp for rk3036

[Xing Zheng]

Enable the rk3036's cpu1 and smp.

Signed-off-by: Xing Zheng <zhengxing-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
Reviewed-by: Heiko Stuebner <heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org>
---

Changes in v3: None

 arch/arm/boot/dts/rk3036.dtsi |    1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/boot/dts/rk3036.dtsi b/arch/arm/boot/dts/rk3036.dtsi
index fea51de..ecd053d 100644
--- a/arch/arm/boot/dts/rk3036.dtsi
+++ b/arch/arm/boot/dts/rk3036.dtsi
@@ -72,6 +72,7 @@
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
+		enable-method = "rockchip,rk3036-smp";
 
 		cpu0: cpu@f00 {
 			device_type = "cpu";
-- 
1.7.9.5


--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v3 1/8] ARM: dts: rockchip: add core rk3036 dts

[kbuild test robot]

[-- Attachment #1: Type: text/plain, Size: 1421 bytes --]

Hi Xing,

[auto build test results on v4.3-rc3 -- if it's inappropriate base, please ignore]

config: arm-arm67 (attached as .config)
reproduce:
        wget https://git.kernel.org/cgit/linux/kernel/git/wfg/lkp-tests.git/plain/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # save the attached .config to linux build tree
        make.cross ARCH=arm 

Note: the linux-review/Xing-Zheng/Build-and-support-rk3036-SoC-platform HEAD fa7deba821e05956d8a4937e14541d315682f39a builds fine.
      It only hurts bisectibility.

All error/warnings (new ones prefixed by >>):

   In file included from arch/arm/boot/dts/rk3036-evb.dts:43:0:
>> arch/arm/boot/dts/rk3036.dtsi:45:42: fatal error: dt-bindings/clock/rk3036-cru.h: No such file or directory
    #include <dt-bindings/clock/rk3036-cru.h>
                                             ^
   compilation terminated.

vim +45 arch/arm/boot/dts/rk3036.dtsi

    39	 */
    40	
    41	#include <dt-bindings/gpio/gpio.h>
    42	#include <dt-bindings/interrupt-controller/irq.h>
    43	#include <dt-bindings/interrupt-controller/arm-gic.h>
    44	#include <dt-bindings/pinctrl/rockchip.h>
  > 45	#include <dt-bindings/clock/rk3036-cru.h>
    46	#include "skeleton.dtsi"
    47	
    48	/ {

---
0-DAY kernel test infrastructure                Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all                   Intel Corporation

[-- Attachment #2: .config.gz --]
[-- Type: application/octet-stream, Size: 28527 bytes --]