From: Fei Wang <w.f-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
To: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
catalin.marinas-5wv7dgnIgG8@public.gmane.org,
will.deacon-5wv7dgnIgG8@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
pawel.moll-5wv7dgnIgG8@public.gmane.org,
mark.rutland-5wv7dgnIgG8@public.gmane.org,
ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org,
khilman-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
sameo-VuQAYsv1563Yd54FQh9/CA@public.gmane.org,
lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
lgirdwood-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org
Cc: bintian.wang-hv44wF8Li93QT0dZR+AlfA@public.gmane.org,
xuwei5-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org,
haojian.zhuang-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
zhangfei.gao-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
guodong.xu-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
jorge.ramirez-ortiz-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
puck.chen-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org,
xuyiping-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org,
kong.kongxinwei-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org,
z.liuxinliang-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org,
william.wfei-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
zhongkaihua-hv44wF8Li93QT0dZR+AlfA@public.gmane.org,
w.f-hv44wF8Li93QT0dZR+AlfA@public.gmane.org
Subject: [PATCH 0/8] Add Support for Hi6220 PMIC Hi6553 MFD Core and Regulator
Date: Wed, 30 Sep 2015 19:05:03 +0800 [thread overview]
Message-ID: <1443611111-3196-1-git-send-email-w.f@huawei.com> (raw)
The patch sets add support for Hi6220 PMIC Hi655x MFD core and its regulator driver.
Current testing and support board is Hikey which is one of Linaro 96boards.
It is an arm64 open source board. For more information about this board,
please access https://www.96boards.org.
This is hardware layout for access PMIC Hi655x from AP SoC Hi6220.
Between PMIC Hi655x and Hi6220, the physical signal channel is SSI.We can use memory-mapped I/O to communicate.
+----------------+ +-------------+
| | | |
| Hi6220 | SSI bus | Hi655x |
| |-------------| |
| |(REGMAP_MMIO)| |
+----------------+ +-------------+
This patchset are based on 4.3-rc1.
Fei Wang (8):
dt-bindings: pmic: Document Hi655x pmic driver
mfd: Hi655x: Add support for PMIC Hi655x MFD
arm64: dts: add Hi655x pmic node
regulator: Hi655x: Add support for Hi655x regulator
arm64: dts: Add Hi655x regulator config node
dt-bindings: mtcmos: Document Hi6220 mtcmos driver
mtcmos: Hi6220: Add Hi6220 mtcmos regulator driver
arm64: dts: Add Hi6220 mtcmos regulator node
.../devicetree/bindings/mfd/hisilicon,hi655x.txt | 80 +++
.../bindings/regulator/hisilicon,hi6220-mtcmos.txt | 32 ++
arch/arm64/boot/dts/hisilicon/hi6220.dtsi | 275 +++++++++++
drivers/mfd/Kconfig | 9 +
drivers/mfd/Makefile | 1 +
drivers/mfd/hi655x-pmic.c | 358 ++++++++++++++
drivers/regulator/Kconfig | 16 +
drivers/regulator/Makefile | 2 +
drivers/regulator/hi6220-mtcmos.c | 281 +++++++++++
drivers/regulator/hi655x-regulator.c | 517 ++++++++++++++++++++
include/linux/mfd/hi655x-pmic.h | 56 +++
include/linux/regulator/hi655x-regulator.h | 69 +++
12 files changed, 1696 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mfd/hisilicon,hi655x.txt
create mode 100644 Documentation/devicetree/bindings/regulator/hisilicon,hi6220-mtcmos.txt
create mode 100644 drivers/mfd/hi655x-pmic.c
create mode 100644 drivers/regulator/hi6220-mtcmos.c
create mode 100644 drivers/regulator/hi655x-regulator.c
create mode 100644 include/linux/mfd/hi655x-pmic.h
create mode 100644 include/linux/regulator/hi655x-regulator.h
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next reply other threads:[~2015-09-30 11:05 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-09-30 11:05 Fei Wang [this message]
2015-09-30 11:05 ` [PATCH 1/8] dt-bindings: pmic: Document Hi655x pmic driver Fei Wang
[not found] ` <1443611111-3196-2-git-send-email-w.f-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
2015-09-30 17:39 ` Mark Brown
2015-10-08 6:33 ` wangfei
2015-10-12 16:49 ` Mark Brown
2015-10-01 7:56 ` Lee Jones
2015-10-01 7:58 ` Lee Jones
2015-10-08 7:03 ` wangfei
2015-09-30 11:05 ` [PATCH 2/8] mfd: Hi655x: Add support for PMIC Hi655x MFD Fei Wang
[not found] ` <1443611111-3196-1-git-send-email-w.f-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
2015-09-30 11:05 ` [PATCH 3/8] arm64: dts: add Hi655x pmic node Fei Wang
2015-09-30 11:05 ` [PATCH 7/8] mtcmos: Hi6220: Add Hi6220 mtcmos regulator driver Fei Wang
2015-09-30 11:05 ` [PATCH 8/8] arm64: dts: Add Hi6220 mtcmos regulator node Fei Wang
2015-09-30 11:05 ` [PATCH 4/8] regulator: Hi655x: Add support for Hi655x regulator Fei Wang
[not found] ` <1443611111-3196-5-git-send-email-w.f-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
2015-09-30 17:58 ` Mark Brown
2015-10-08 7:38 ` wangfei
2015-10-08 7:47 ` Javier Martinez Canillas
2015-09-30 11:05 ` [PATCH 5/8] arm64: dts: Add Hi655x regulator config node Fei Wang
2015-09-30 11:05 ` [PATCH 6/8] dt-bindings: mtcmos: Document Hi6220 mtcmos driver Fei Wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1443611111-3196-1-git-send-email-w.f@huawei.com \
--to=w.f-hv44wf8li93qt0dzr+alfa@public.gmane.org \
--cc=bintian.wang-hv44wF8Li93QT0dZR+AlfA@public.gmane.org \
--cc=broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=catalin.marinas-5wv7dgnIgG8@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=guodong.xu-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=haojian.zhuang-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org \
--cc=jorge.ramirez-ortiz-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=khilman-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=kong.kongxinwei-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org \
--cc=lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=lgirdwood-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=pawel.moll-5wv7dgnIgG8@public.gmane.org \
--cc=puck.chen-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=sameo-VuQAYsv1563Yd54FQh9/CA@public.gmane.org \
--cc=will.deacon-5wv7dgnIgG8@public.gmane.org \
--cc=william.wfei-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=xuwei5-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org \
--cc=xuyiping-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org \
--cc=z.liuxinliang-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org \
--cc=zhangfei.gao-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=zhongkaihua-hv44wF8Li93QT0dZR+AlfA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).