[PATCH 00/16] LPC18xx DTS changes for 4.4

[PATCH 00/16] LPC18xx DTS changes for 4.4

[Joachim Eastwood]

This patch set includes the DTS changes for lpc18xx for v4.4. Mostly
additions of new nodes to lpc18xx.dtsi for drivers that when upstream
during the last cycle and board updates to the Hitex and Embedded
Artists boards.


Ariel D'Alessandro (3):
  ARM: dts: lpc18xx: add watchdog node
  ARM: dts: lpc18xx: add sct pwm node
  ARM: dts: lpc4350-hitex-eval: add i2c0 and devices

Joachim Eastwood (13):
  ARM: dts: lpc18xx: add rgu node
  ARM: dts: lpc18xx: add spifi node
  ARM: dts: lpc18xx: add dmac node
  ARM: dts: lpc18xx: add dmamux node
  ARM: dts: lpc18xx: add dma to ssp0/1
  ARM: dts: lpc18xx: add dma to uart0/1/2/3
  ARM: dts: lpc18xx: add i2c nodes
  ARM: dts: lpc18xx: add resets entry to device nodes
  ARM: dts: lpc4357-ea4357: add spifi and flash device
  ARM: dts: lpc4357-ea4357: add ssp0
  ARM: dts: lpc4357-ea4357: add i2c0 and devices
  ARM: dts: lpc4350-hitex-eval: add spifi and flash device
  ARM: dts: lpc4350-hitex-eval: add joystick, buttons and leds

 arch/arm/boot/dts/lpc18xx.dtsi              | 134 +++++++++++++++++++++
 arch/arm/boot/dts/lpc4350-hitex-eval.dts    | 175 ++++++++++++++++++++++++++++
 arch/arm/boot/dts/lpc4357-ea4357-devkit.dts |  95 +++++++++++++++
 3 files changed, 404 insertions(+)

-- 
1.8.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 01/16] ARM: dts: lpc18xx: add rgu node

[Joachim Eastwood]

Add the NXP LPC1850 RGU (Reset Generation Unit) reset controller
node to the dtsi for all lpc18xx/43xx devices.

Signed-off-by: Joachim Eastwood <manabian-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
 arch/arm/boot/dts/lpc18xx.dtsi | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm/boot/dts/lpc18xx.dtsi b/arch/arm/boot/dts/lpc18xx.dtsi
index 2c569a6ddc9a..29a62b600ae5 100644
--- a/arch/arm/boot/dts/lpc18xx.dtsi
+++ b/arch/arm/boot/dts/lpc18xx.dtsi
@@ -178,6 +178,14 @@
 				      "base_ssp0_clk",  "base_sdio_clk";
 		};
 
+		rgu: reset-controller@40053000 {
+			compatible = "nxp,lpc1850-rgu";
+			reg = <0x40053000 0x1000>;
+			clocks = <&cgu BASE_SAFE_CLK>, <&ccu1 CLK_CPU_BUS>;
+			clock-names = "delay", "reg";
+			#reset-cells = <1>;
+		};
+
 		uart0: serial@40081000 {
 			compatible = "nxp,lpc1850-uart", "ns16550a";
 			reg = <0x40081000 0x1000>;
-- 
1.8.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 02/16] ARM: dts: lpc18xx: add spifi node

[Joachim Eastwood]

Add the NXP LPC1773 SPIFI (SPI Flash Interface) flash controller
node to the dtsi for all lpc18xx/43xx devices.

Signed-off-by: Joachim Eastwood <manabian-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
 arch/arm/boot/dts/lpc18xx.dtsi | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/arch/arm/boot/dts/lpc18xx.dtsi b/arch/arm/boot/dts/lpc18xx.dtsi
index 29a62b600ae5..a428a0946be2 100644
--- a/arch/arm/boot/dts/lpc18xx.dtsi
+++ b/arch/arm/boot/dts/lpc18xx.dtsi
@@ -68,6 +68,17 @@
 	};
 
 	soc {
+		spifi: flash-controller@40003000 {
+			compatible = "nxp,lpc1773-spifi";
+			reg = <0x40003000 0x1000>, <0x14000000 0x4000000>;
+			reg-names = "spifi", "flash";
+			interrupts = <30>;
+			clocks = <&ccu1 CLK_SPIFI>, <&ccu1 CLK_CPU_SPIFI>;
+			clock-names = "spifi", "reg";
+			resets = <&rgu 53>;
+			status = "disabled";
+		};
+
 		mmcsd: mmcsd@40004000 {
 			compatible = "snps,dw-mshc";
 			reg = <0x40004000 0x1000>;
-- 
1.8.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 03/16] ARM: dts: lpc18xx: add dmac node

[Joachim Eastwood]

Add the ARM PL080 DMA controller node to the dtsi for all
lpc18xx/43xx devices.

Signed-off-by: Joachim Eastwood <manabian-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
 arch/arm/boot/dts/lpc18xx.dtsi | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/arch/arm/boot/dts/lpc18xx.dtsi b/arch/arm/boot/dts/lpc18xx.dtsi
index a428a0946be2..5516c3ee8c5a 100644
--- a/arch/arm/boot/dts/lpc18xx.dtsi
+++ b/arch/arm/boot/dts/lpc18xx.dtsi
@@ -68,6 +68,25 @@
 	};
 
 	soc {
+		dmac: dma-controller@40002000 {
+			compatible = "arm,pl080", "arm,primecell";
+			arm,primecell-periphid = <0x00041080>;
+			reg = <0x40002000 0x1000>;
+			interrupts = <2>;
+			clocks = <&ccu1 CLK_CPU_DMA>;
+			clock-names = "apb_pclk";
+			resets = <&rgu 19>;
+			#dma-cells = <2>;
+			dma-channels = <8>;
+			dma-requests = <16>;
+			lli-bus-interface-ahb1;
+			lli-bus-interface-ahb2;
+			mem-bus-interface-ahb1;
+			mem-bus-interface-ahb2;
+			memcpy-burst-size = <256>;
+			memcpy-bus-width = <32>;
+		};
+
 		spifi: flash-controller@40003000 {
 			compatible = "nxp,lpc1773-spifi";
 			reg = <0x40003000 0x1000>, <0x14000000 0x4000000>;
-- 
1.8.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 04/16] ARM: dts: lpc18xx: add dmamux node

[Joachim Eastwood]

Add node for the DMA multiplexer placed in front of the PL080 DMA
controller on lpc18xx/43xx devices.

Signed-off-by: Joachim Eastwood <manabian-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
 arch/arm/boot/dts/lpc18xx.dtsi | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/arm/boot/dts/lpc18xx.dtsi b/arch/arm/boot/dts/lpc18xx.dtsi
index 5516c3ee8c5a..f0d1a099507f 100644
--- a/arch/arm/boot/dts/lpc18xx.dtsi
+++ b/arch/arm/boot/dts/lpc18xx.dtsi
@@ -171,6 +171,13 @@
 				clocks = <&ccu1 CLK_USB0>;
 				#phy-cells = <0>;
 			};
+
+			dmamux: dma-mux@11c {
+				compatible = "nxp,lpc1850-dmamux";
+				#dma-cells = <3>;
+				dma-requests = <64>;
+				dma-masters = <&dmac>;
+			};
 		};
 
 		cgu: clock-controller@40050000 {
-- 
1.8.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 05/16] ARM: dts: lpc18xx: add dma to ssp0/1

[Joachim Eastwood]

Add dmas entries to the two SSP peripherals on LPC18xx/43xx devices
so that DMA can be used to transfer data.

Signed-off-by: Joachim Eastwood <manabian-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
 arch/arm/boot/dts/lpc18xx.dtsi | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/arch/arm/boot/dts/lpc18xx.dtsi b/arch/arm/boot/dts/lpc18xx.dtsi
index f0d1a099507f..5b7ca7066161 100644
--- a/arch/arm/boot/dts/lpc18xx.dtsi
+++ b/arch/arm/boot/dts/lpc18xx.dtsi
@@ -249,6 +249,9 @@
 			interrupts = <22>;
 			clocks = <&ccu2 CLK_APB0_SSP0>, <&ccu1 CLK_CPU_SSP0>;
 			clock-names = "sspclk", "apb_pclk";
+			dmas = <&dmamux  9 0 2
+				&dmamux 10 0 2>;
+			dma-names = "rx", "tx";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			status = "disabled";
@@ -326,6 +329,16 @@
 			interrupts = <23>;
 			clocks = <&ccu2 CLK_APB2_SSP1>, <&ccu1 CLK_CPU_SSP1>;
 			clock-names = "sspclk", "apb_pclk";
+			dmas = <&dmamux 11 2 2
+				&dmamux 12 2 2
+				&dmamux  3 3 2
+				&dmamux  4 3 2
+				&dmamux  5 2 2
+				&dmamux  6 2 2
+				&dmamux 13 2 2
+				&dmamux 14 2 2>;
+			dma-names = "rx", "tx", "tx", "rx",
+				    "tx", "rx", "rx", "tx";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			status = "disabled";
-- 
1.8.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 06/16] ARM: dts: lpc18xx: add dma to uart0/1/2/3

[Joachim Eastwood]

Add dmas entries to the four UART peripherals on LPC18xx/43xx devices
so that DMA can be used to transfer data.

Signed-off-by: Joachim Eastwood <manabian-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
 arch/arm/boot/dts/lpc18xx.dtsi | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/arch/arm/boot/dts/lpc18xx.dtsi b/arch/arm/boot/dts/lpc18xx.dtsi
index 5b7ca7066161..f97feea5f5da 100644
--- a/arch/arm/boot/dts/lpc18xx.dtsi
+++ b/arch/arm/boot/dts/lpc18xx.dtsi
@@ -230,6 +230,11 @@
 			interrupts = <24>;
 			clocks = <&ccu2 CLK_APB0_UART0>, <&ccu1 CLK_CPU_UART0>;
 			clock-names = "uartclk", "reg";
+			dmas = <&dmamux  1 1 2
+				&dmamux  2 1 2
+				&dmamux 11 2 2
+				&dmamux 12 2 2>;
+			dma-names = "tx", "rx", "tx", "rx";
 			status = "disabled";
 		};
 
@@ -240,6 +245,9 @@
 			interrupts = <25>;
 			clocks = <&ccu2 CLK_APB0_UART1>, <&ccu1 CLK_CPU_UART1>;
 			clock-names = "uartclk", "reg";
+			dmas = <&dmamux 3 1 2
+				&dmamux 4 1 2>;
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -294,6 +302,9 @@
 			interrupts = <26>;
 			clocks = <&ccu2 CLK_APB2_UART2>, <&ccu1 CLK_CPU_UART2>;
 			clock-names = "uartclk", "reg";
+			dmas = <&dmamux 5 1 2
+				&dmamux 6 1 2>;
+			dma-names = "tx", "rx";
 			status = "disabled";
 		};
 
@@ -304,6 +315,11 @@
 			interrupts = <27>;
 			clocks = <&ccu2 CLK_APB2_UART3>, <&ccu1 CLK_CPU_UART3>;
 			clock-names = "uartclk", "reg";
+			dmas = <&dmamux  7 1 2
+				&dmamux  8 1 2
+				&dmamux 13 3 2
+				&dmamux 14 3 2>;
+			dma-names = "tx", "rx", "rx", "tx";
 			status = "disabled";
 		};
 
-- 
1.8.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 07/16] ARM: dts: lpc18xx: add i2c nodes

[Joachim Eastwood]

Add NXP LPC1778 I2C controller nodes to the dtsi for all
lpc18xx/43xx devices.

Signed-off-by: Joachim Eastwood <manabian-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
 arch/arm/boot/dts/lpc18xx.dtsi | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/arch/arm/boot/dts/lpc18xx.dtsi b/arch/arm/boot/dts/lpc18xx.dtsi
index f97feea5f5da..04bea2dc0e66 100644
--- a/arch/arm/boot/dts/lpc18xx.dtsi
+++ b/arch/arm/boot/dts/lpc18xx.dtsi
@@ -287,6 +287,17 @@
 			clocks = <&ccu1 CLK_CPU_SCU>;
 		};
 
+		i2c0: i2c@400a1000 {
+			compatible = "nxp,lpc1788-i2c";
+			reg = <0x400a1000 0x1000>;
+			interrupts = <18>;
+			clocks = <&ccu1 CLK_APB1_I2C0>;
+			resets = <&rgu 48>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
 		can1: can@400a4000 {
 			compatible = "bosch,c_can";
 			reg = <0x400a4000 0x1000>;
@@ -360,6 +371,17 @@
 			status = "disabled";
 		};
 
+		i2c1: i2c@400e0000 {
+			compatible = "nxp,lpc1788-i2c";
+			reg = <0x400e0000 0x1000>;
+			interrupts = <19>;
+			clocks = <&ccu1 CLK_APB3_I2C1>;
+			resets = <&rgu 49>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
 		can0: can@400e2000 {
 			compatible = "bosch,c_can";
 			reg = <0x400e2000 0x1000>;
-- 
1.8.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 08/16] ARM: dts: lpc18xx: add watchdog node

[Joachim Eastwood]

From: Ariel D'Alessandro <ariel-30ULvvUtt6G51wMPkGsGjgyUoB5FGQPZ@public.gmane.org>

Add node for the watchdog timer found on LPC18xx/LPC43xx.

Signed-off-by: Ariel D'Alessandro <ariel-30ULvvUtt6G51wMPkGsGjgyUoB5FGQPZ@public.gmane.org>
Signed-off-by: Joachim Eastwood <manabian-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
 arch/arm/boot/dts/lpc18xx.dtsi | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm/boot/dts/lpc18xx.dtsi b/arch/arm/boot/dts/lpc18xx.dtsi
index 04bea2dc0e66..4ea82536a8a0 100644
--- a/arch/arm/boot/dts/lpc18xx.dtsi
+++ b/arch/arm/boot/dts/lpc18xx.dtsi
@@ -223,6 +223,14 @@
 			#reset-cells = <1>;
 		};
 
+		watchdog@40080000 {
+			compatible = "nxp,lpc1850-wwdt";
+			reg = <0x40080000 0x24>;
+			interrupts = <49>;
+			clocks = <&cgu BASE_SAFE_CLK>, <&ccu1 CLK_CPU_WWDT>;
+			clock-names = "wdtclk", "reg";
+		};
+
 		uart0: serial@40081000 {
 			compatible = "nxp,lpc1850-uart", "ns16550a";
 			reg = <0x40081000 0x1000>;
-- 
1.8.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 09/16] ARM: dts: lpc18xx: add sct pwm node

[Joachim Eastwood]

From: Ariel D'Alessandro <ariel-30ULvvUtt6G51wMPkGsGjgyUoB5FGQPZ@public.gmane.org>

NXP LPC SoCs family, which includes LPC18xx/LPC43xx, provides a State
Configurable Timer (SCT) which can be configured as a Pulse Width
Modulator.

Signed-off-by: Ariel D'Alessandro <ariel-30ULvvUtt6G51wMPkGsGjgyUoB5FGQPZ@public.gmane.org>
Signed-off-by: Joachim Eastwood <manabian-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
 arch/arm/boot/dts/lpc18xx.dtsi | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/arm/boot/dts/lpc18xx.dtsi b/arch/arm/boot/dts/lpc18xx.dtsi
index 4ea82536a8a0..19c6f2951129 100644
--- a/arch/arm/boot/dts/lpc18xx.dtsi
+++ b/arch/arm/boot/dts/lpc18xx.dtsi
@@ -68,6 +68,16 @@
 	};
 
 	soc {
+		sct_pwm: pwm@40000000 {
+			compatible = "nxp,lpc1850-sct-pwm";
+			reg = <0x40000000 0x1000>;
+			clocks =<&ccu1 CLK_CPU_SCT>;
+			clock-names = "pwm";
+			resets = <&rgu 37>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
 		dmac: dma-controller@40002000 {
 			compatible = "arm,pl080", "arm,primecell";
 			arm,primecell-periphid = <0x00041080>;
-- 
1.8.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 10/16] ARM: dts: lpc18xx: add resets entry to device nodes

[Joachim Eastwood]

Most of the peripherals on LPC18xx/43xx devices have their reset
lines hooked up to internal reset controller (RGU). Add reset
entries to the device nodes so a driver can use the reset line.

Signed-off-by: Joachim Eastwood <manabian-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
 arch/arm/boot/dts/lpc18xx.dtsi | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/arch/arm/boot/dts/lpc18xx.dtsi b/arch/arm/boot/dts/lpc18xx.dtsi
index 19c6f2951129..52591d83e8cd 100644
--- a/arch/arm/boot/dts/lpc18xx.dtsi
+++ b/arch/arm/boot/dts/lpc18xx.dtsi
@@ -115,6 +115,7 @@
 			num-slots = <1>;
 			clocks = <&ccu2 CLK_SDIO>, <&ccu1 CLK_CPU_SDIO>;
 			clock-names = "ciu", "biu";
+			resets = <&rgu 20>;
 			status = "disabled";
 		};
 
@@ -123,6 +124,7 @@
 			reg = <0x40006100 0x100>;
 			interrupts = <8>;
 			clocks = <&ccu1 CLK_CPU_USB0>;
+			resets = <&rgu 17>;
 			phys = <&usb0_otg_phy>;
 			phy-names = "usb";
 			has-transaction-translator;
@@ -134,6 +136,7 @@
 			reg = <0x40007100 0x100>;
 			interrupts = <9>;
 			clocks = <&ccu1 CLK_CPU_USB1>;
+			resets = <&rgu 18>;
 			status = "disabled";
 		};
 
@@ -142,6 +145,7 @@
 			reg = <0x40005000 0x1000>;
 			clocks = <&ccu1 CLK_CPU_EMCDIV>, <&ccu1 CLK_CPU_EMC>;
 			clock-names = "mpmcclk", "apb_pclk";
+			resets = <&rgu 21>;
 			#address-cells = <2>;
 			#size-cells = <1>;
 			ranges = <0 0 0x1c000000 0x1000000
@@ -158,6 +162,7 @@
 			interrupt-names = "combined";
 			clocks = <&cgu BASE_LCD_CLK>, <&ccu1 CLK_CPU_LCD>;
 			clock-names = "clcdclk", "apb_pclk";
+			resets = <&rgu 16>;
 			status = "disabled";
 		};
 
@@ -168,6 +173,8 @@
 			interrupt-names	= "macirq";
 			clocks = <&ccu1 CLK_CPU_ETHERNET>;
 			clock-names = "stmmaceth";
+			resets = <&rgu 22>;
+			reset-names = "stmmaceth";
 			status = "disabled";
 		};
 
@@ -175,6 +182,7 @@
 			compatible = "nxp,lpc1850-creg", "syscon", "simple-mfd";
 			reg = <0x40043000 0x1000>;
 			clocks = <&ccu1 CLK_CPU_CREG>;
+			resets = <&rgu 5>;
 
 			usb0_otg_phy: phy@004 {
 				compatible = "nxp,lpc1850-usb-otg-phy";
@@ -248,6 +256,7 @@
 			interrupts = <24>;
 			clocks = <&ccu2 CLK_APB0_UART0>, <&ccu1 CLK_CPU_UART0>;
 			clock-names = "uartclk", "reg";
+			resets = <&rgu 44>;
 			dmas = <&dmamux  1 1 2
 				&dmamux  2 1 2
 				&dmamux 11 2 2
@@ -263,6 +272,7 @@
 			interrupts = <25>;
 			clocks = <&ccu2 CLK_APB0_UART1>, <&ccu1 CLK_CPU_UART1>;
 			clock-names = "uartclk", "reg";
+			resets = <&rgu 45>;
 			dmas = <&dmamux 3 1 2
 				&dmamux 4 1 2>;
 			dma-names = "tx", "rx";
@@ -275,6 +285,7 @@
 			interrupts = <22>;
 			clocks = <&ccu2 CLK_APB0_SSP0>, <&ccu1 CLK_CPU_SSP0>;
 			clock-names = "sspclk", "apb_pclk";
+			resets = <&rgu 50>;
 			dmas = <&dmamux  9 0 2
 				&dmamux 10 0 2>;
 			dma-names = "rx", "tx";
@@ -289,6 +300,7 @@
 			interrupts = <12>;
 			clocks = <&ccu1 CLK_CPU_TIMER0>;
 			clock-names = "timerclk";
+			resets = <&rgu 32>;
 		};
 
 		timer1: timer@40085000 {
@@ -297,6 +309,7 @@
 			interrupts = <13>;
 			clocks = <&ccu1 CLK_CPU_TIMER1>;
 			clock-names = "timerclk";
+			resets = <&rgu 33>;
 		};
 
 		pinctrl: pinctrl@40086000 {
@@ -321,6 +334,7 @@
 			reg = <0x400a4000 0x1000>;
 			interrupts = <43>;
 			clocks = <&ccu1 CLK_APB1_CAN1>;
+			resets = <&rgu 54>;
 			status = "disabled";
 		};
 
@@ -331,6 +345,7 @@
 			interrupts = <26>;
 			clocks = <&ccu2 CLK_APB2_UART2>, <&ccu1 CLK_CPU_UART2>;
 			clock-names = "uartclk", "reg";
+			resets = <&rgu 46>;
 			dmas = <&dmamux 5 1 2
 				&dmamux 6 1 2>;
 			dma-names = "tx", "rx";
@@ -344,6 +359,7 @@
 			interrupts = <27>;
 			clocks = <&ccu2 CLK_APB2_UART3>, <&ccu1 CLK_CPU_UART3>;
 			clock-names = "uartclk", "reg";
+			resets = <&rgu 47>;
 			dmas = <&dmamux  7 1 2
 				&dmamux  8 1 2
 				&dmamux 13 3 2
@@ -358,6 +374,7 @@
 			interrupts = <14>;
 			clocks = <&ccu1 CLK_CPU_TIMER2>;
 			clock-names = "timerclk";
+			resets = <&rgu 34>;
 		};
 
 		timer3: timer@400c4000 {
@@ -366,6 +383,7 @@
 			interrupts = <15>;
 			clocks = <&ccu1 CLK_CPU_TIMER3>;
 			clock-names = "timerclk";
+			resets = <&rgu 35>;
 		};
 
 		ssp1: spi@400c5000 {
@@ -374,6 +392,7 @@
 			interrupts = <23>;
 			clocks = <&ccu2 CLK_APB2_SSP1>, <&ccu1 CLK_CPU_SSP1>;
 			clock-names = "sspclk", "apb_pclk";
+			resets = <&rgu 51>;
 			dmas = <&dmamux 11 2 2
 				&dmamux 12 2 2
 				&dmamux  3 3 2
@@ -405,6 +424,7 @@
 			reg = <0x400e2000 0x1000>;
 			interrupts = <51>;
 			clocks = <&ccu1 CLK_APB3_CAN0>;
+			resets = <&rgu 55>;
 			status = "disabled";
 		};
 
-- 
1.8.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 11/16] ARM: dts: lpc4357-ea4357: add spifi and flash device

[Joachim Eastwood]

The EA4357 dev kit has a Spansion S25FL016K SPI-NOR Flash connected
to the SPIFI perherial.

Signed-off-by: Joachim Eastwood <manabian-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
 arch/arm/boot/dts/lpc4357-ea4357-devkit.dts | 46 +++++++++++++++++++++++++++++
 1 file changed, 46 insertions(+)

diff --git a/arch/arm/boot/dts/lpc4357-ea4357-devkit.dts b/arch/arm/boot/dts/lpc4357-ea4357-devkit.dts
index 5f7bdad80963..9fcc0f357c2d 100644
--- a/arch/arm/boot/dts/lpc4357-ea4357-devkit.dts
+++ b/arch/arm/boot/dts/lpc4357-ea4357-devkit.dts
@@ -363,6 +363,32 @@
 		};
 	};
 
+	spifi_pins: spifi-pins {
+		spifi_clk_cfg {
+			pins = "p3_3";
+			function = "spifi";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		spifi_mosi_miso_sio2_3_cfg {
+			pins = "p3_7", "p3_6", "p3_5", "p3_4";
+			function = "spifi";
+			slew-rate = <0>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		spifi_cs_cfg {
+			pins = "p3_8";
+			function = "spifi";
+			bias-disable;
+		};
+	};
+
 	uart0_pins: uart0-pins {
 		uart0_rx_cfg {
 			pins = "pf_11";
@@ -489,6 +515,26 @@
 	pinctrl-0 = <&sdmmc_pins>;
 };
 
+&spifi {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spifi_pins>;
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		spi-cpol;
+		spi-cpha;
+		spi-rx-bus-width = <4>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "data";
+			reg = <0 0x200000>;
+		};
+	};
+};
+
 &uart0 {
 	status = "okay";
 	pinctrl-names = "default";
-- 
1.8.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 12/16] ARM: dts: lpc4357-ea4357: add ssp0

[Joachim Eastwood]

The SSP0 can be found on the EA4357 Dev Kit on J15 pin 3-6.

Signed-off-by: Joachim Eastwood <manabian-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
 arch/arm/boot/dts/lpc4357-ea4357-devkit.dts | 24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)

diff --git a/arch/arm/boot/dts/lpc4357-ea4357-devkit.dts b/arch/arm/boot/dts/lpc4357-ea4357-devkit.dts
index 9fcc0f357c2d..4d2d74a064c4 100644
--- a/arch/arm/boot/dts/lpc4357-ea4357-devkit.dts
+++ b/arch/arm/boot/dts/lpc4357-ea4357-devkit.dts
@@ -389,6 +389,23 @@
 		};
 	};
 
+	ssp0_pins: ssp0-pins {
+		ssp0_sck_miso_mosi {
+			pins = "pf_0", "pf_2", "pf_3";
+			function = "ssp0";
+			slew-rate = <1>;
+			bias-pull-down;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		ssp0_ssel {
+			pins = "pf_1";
+			function = "ssp0";
+			bias-pull-up;
+		};
+	};
+
 	uart0_pins: uart0-pins {
 		uart0_rx_cfg {
 			pins = "pf_11";
@@ -535,6 +552,13 @@
 	};
 };
 
+&ssp0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&ssp0_pins>;
+	num-cs = <1>;
+};
+
 &uart0 {
 	status = "okay";
 	pinctrl-names = "default";
-- 
1.8.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 13/16] ARM: dts: lpc4357-ea4357: add i2c0 and devices

[Joachim Eastwood]

Add I2C0 and some of the I2C devices on the EA4357 dev kit.

Signed-off-by: Joachim Eastwood <manabian-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
 arch/arm/boot/dts/lpc4357-ea4357-devkit.dts | 25 +++++++++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/arch/arm/boot/dts/lpc4357-ea4357-devkit.dts b/arch/arm/boot/dts/lpc4357-ea4357-devkit.dts
index 4d2d74a064c4..391121d24daa 100644
--- a/arch/arm/boot/dts/lpc4357-ea4357-devkit.dts
+++ b/arch/arm/boot/dts/lpc4357-ea4357-devkit.dts
@@ -332,6 +332,14 @@
 		};
 	};
 
+	i2c0_pins: i2c0-pins {
+		i2c0_pins_cfg {
+			pins = "i2c0_scl", "i2c0_sda";
+			function = "i2c0";
+			input-enable;
+		};
+	};
+
 	sdmmc_pins: sdmmc-pins {
 		sdmmc_clk_cfg {
 			pins = "pc_0";
@@ -453,6 +461,23 @@
 	};
 };
 
+&i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	clock-frequency = <400000>;
+
+	lm75@48 {
+		compatible = "nxp,lm75";
+		reg = <0x48>;
+	};
+
+	eeprom@57 {
+		compatible = "microchip,24c64";
+		reg = <0x57>;
+	};
+};
+
 &emc {
 	status = "okay";
 	pinctrl-names = "default";
-- 
1.8.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 14/16] ARM: dts: lpc4350-hitex-eval: add spifi and flash device

[Joachim Eastwood]

The Hitex LPC4350 eval board has a Spansion S25SL064P SPI-NOR Flash connected
to the SPIFI perherial.

Signed-off-by: Joachim Eastwood <manabian-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
 arch/arm/boot/dts/lpc4350-hitex-eval.dts | 57 ++++++++++++++++++++++++++++++++
 1 file changed, 57 insertions(+)

diff --git a/arch/arm/boot/dts/lpc4350-hitex-eval.dts b/arch/arm/boot/dts/lpc4350-hitex-eval.dts
index 32bc7ff4eb2a..c1dd76e5fc45 100644
--- a/arch/arm/boot/dts/lpc4350-hitex-eval.dts
+++ b/arch/arm/boot/dts/lpc4350-hitex-eval.dts
@@ -186,6 +186,35 @@
 		};
 	};
 
+	spifi_pins: spifi-pins {
+		spifi_clk_cfg {
+			pins = "p3_3";
+			function = "spifi";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		spifi_mosi_miso_sio2_3_cfg {
+			pins = "p3_7", "p3_6", "p3_5", "p3_4";
+			function = "spifi";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+
+		spifi_cs_cfg {
+			pins = "p3_8";
+			function = "spifi";
+			slew-rate = <1>;
+			bias-disable;
+			input-enable;
+			input-schmitt-disable;
+		};
+	};
+
 	uart0_pins: uart0-pins {
 		uart0_rx_cfg {
 			pins = "pf_11";
@@ -278,6 +307,34 @@
 	pinctrl-0 = <&enet_mii_pins>;
 };
 
+&spifi {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spifi_pins>;
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		spi-rx-bus-width = <4>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "bootloader";
+			reg = <0x000000 0x040000>; /* 256 KiB */
+		};
+
+		partition@1 {
+			label = "kernel";
+			reg = <0x040000 0x2c0000>; /* 2.75 MiB */
+		};
+
+		partition@2 {
+			label = "rootfs";
+			reg = <0x300000 0x500000>; /* 5 MiB */
+		};
+	};
+};
+
 &uart0 {
 	status = "okay";
 	pinctrl-names = "default";
-- 
1.8.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 15/16] ARM: dts: lpc4350-hitex-eval: add i2c0 and devices

[Joachim Eastwood]

From: Ariel D'Alessandro <ariel-30ULvvUtt6G51wMPkGsGjgyUoB5FGQPZ@public.gmane.org>

Add the I2C0 bus and the some of the I2C devices on the Hitex
LPC4350 eval board.

Signed-off-by: Ariel D'Alessandro <ariel-30ULvvUtt6G51wMPkGsGjgyUoB5FGQPZ@public.gmane.org>
Signed-off-by: Joachim Eastwood <manabian-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
 arch/arm/boot/dts/lpc4350-hitex-eval.dts | 33 ++++++++++++++++++++++++++++++++
 1 file changed, 33 insertions(+)

diff --git a/arch/arm/boot/dts/lpc4350-hitex-eval.dts b/arch/arm/boot/dts/lpc4350-hitex-eval.dts
index c1dd76e5fc45..5c529f45947b 100644
--- a/arch/arm/boot/dts/lpc4350-hitex-eval.dts
+++ b/arch/arm/boot/dts/lpc4350-hitex-eval.dts
@@ -186,6 +186,14 @@
 		};
 	};
 
+	i2c0_pins: i2c0-pins {
+		i2c0_pins_cfg {
+			pins = "i2c0_scl", "i2c0_sda";
+			function = "i2c0";
+			input-enable;
+		};
+	};
+
 	spifi_pins: spifi-pins {
 		spifi_clk_cfg {
 			pins = "p3_3";
@@ -300,6 +308,31 @@
 	clock-frequency = <25000000>;
 };
 
+&i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	clock-frequency = <400000>;
+
+	/* NXP SE97BTP with temperature sensor + eeprom */
+	sensor@18 {
+		compatible = "nxp,jc42";
+		reg = <0x18>;
+	};
+
+	eeprom@50 {
+		compatible = "nxp,24c02";
+		reg = <0x50>;
+	};
+
+	pca_gpio: gpio@24 {
+		compatible = "nxp,pca9673";
+		reg = <0x24>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
 &mac {
 	status = "okay";
 	phy-mode = "mii";
-- 
1.8.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 16/16] ARM: dts: lpc4350-hitex-eval: add joystick, buttons and leds

[Joachim Eastwood]

Add the joystick, buttons and LEDs connected to the I2C I/O expander.

Signed-off-by: Joachim Eastwood <manabian-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
 arch/arm/boot/dts/lpc4350-hitex-eval.dts | 85 ++++++++++++++++++++++++++++++++
 1 file changed, 85 insertions(+)

diff --git a/arch/arm/boot/dts/lpc4350-hitex-eval.dts b/arch/arm/boot/dts/lpc4350-hitex-eval.dts
index 5c529f45947b..022d495432c1 100644
--- a/arch/arm/boot/dts/lpc4350-hitex-eval.dts
+++ b/arch/arm/boot/dts/lpc4350-hitex-eval.dts
@@ -15,6 +15,9 @@
 #include "lpc18xx.dtsi"
 #include "lpc4350.dtsi"
 
+#include "dt-bindings/input/input.h"
+#include "dt-bindings/gpio/gpio.h"
+
 / {
 	model = "Hitex LPC4350 Evaluation Board";
 	compatible = "hitex,lpc4350-eval-board", "nxp,lpc4350";
@@ -34,6 +37,88 @@
 		device_type = "memory";
 		reg = <0x28000000 0x800000>; /* 8 MB */
 	};
+
+	pca_buttons {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <100>;
+		autorepeat;
+
+		button@0 {
+			label = "joy:right";
+			linux,code = <KEY_RIGHT>;
+			gpios = <&pca_gpio 8 GPIO_ACTIVE_LOW>;
+		};
+
+		button@1 {
+			label = "joy:up";
+			linux,code = <KEY_UP>;
+			gpios = <&pca_gpio 9 GPIO_ACTIVE_LOW>;
+		};
+
+
+		button@2 {
+			label = "joy:enter";
+			linux,code = <KEY_ENTER>;
+			gpios = <&pca_gpio 10 GPIO_ACTIVE_LOW>;
+		};
+
+		button@3 {
+			label = "joy:left";
+			linux,code = <KEY_LEFT>;
+			gpios = <&pca_gpio 11 GPIO_ACTIVE_LOW>;
+		};
+
+		button@4 {
+			label = "joy:down";
+			linux,code = <KEY_DOWN>;
+			gpios = <&pca_gpio 12 GPIO_ACTIVE_LOW>;
+		};
+
+		button@5 {
+			label = "user:sw3";
+			linux,code = <KEY_F1>;
+			gpios = <&pca_gpio 13 GPIO_ACTIVE_LOW>;
+		};
+
+		button@6 {
+			label = "user:sw4";
+			linux,code = <KEY_F2>;
+			gpios = <&pca_gpio 14 GPIO_ACTIVE_LOW>;
+		};
+
+		button@7 {
+			label = "user:sw5";
+			linux,code = <KEY_F3>;
+			gpios = <&pca_gpio 15 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	pca_leds {
+		compatible = "gpio-leds";
+
+		led0 {
+			label = "ext:led0";
+			gpios = <&pca_gpio 0 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led1 {
+			label = "ext:led1";
+			gpios = <&pca_gpio 1 GPIO_ACTIVE_LOW>;
+		};
+
+		led2 {
+			label = "ext:led2";
+			gpios = <&pca_gpio 2 GPIO_ACTIVE_LOW>;
+		};
+
+		led3 {
+			label = "ext:led3";
+			gpios = <&pca_gpio 3 GPIO_ACTIVE_LOW>;
+		};
+	};
 };
 
 &pinctrl {
-- 
1.8.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html