From mboxrd@z Thu Jan 1 00:00:00 1970 From: Joachim Eastwood Subject: [PATCH 01/16] ARM: dts: lpc18xx: add rgu node Date: Thu, 1 Oct 2015 22:54:38 +0200 Message-ID: <1443732893-17145-2-git-send-email-manabian@gmail.com> References: <1443732893-17145-1-git-send-email-manabian@gmail.com> Return-path: In-Reply-To: <1443732893-17145-1-git-send-email-manabian-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org Cc: Joachim Eastwood , devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, ariel-30ULvvUtt6G51wMPkGsGjgyUoB5FGQPZ@public.gmane.org, ezequiel-30ULvvUtt6G51wMPkGsGjgyUoB5FGQPZ@public.gmane.org List-Id: devicetree@vger.kernel.org Add the NXP LPC1850 RGU (Reset Generation Unit) reset controller node to the dtsi for all lpc18xx/43xx devices. Signed-off-by: Joachim Eastwood --- arch/arm/boot/dts/lpc18xx.dtsi | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/arm/boot/dts/lpc18xx.dtsi b/arch/arm/boot/dts/lpc18xx.dtsi index 2c569a6ddc9a..29a62b600ae5 100644 --- a/arch/arm/boot/dts/lpc18xx.dtsi +++ b/arch/arm/boot/dts/lpc18xx.dtsi @@ -178,6 +178,14 @@ "base_ssp0_clk", "base_sdio_clk"; }; + rgu: reset-controller@40053000 { + compatible = "nxp,lpc1850-rgu"; + reg = <0x40053000 0x1000>; + clocks = <&cgu BASE_SAFE_CLK>, <&ccu1 CLK_CPU_BUS>; + clock-names = "delay", "reg"; + #reset-cells = <1>; + }; + uart0: serial@40081000 { compatible = "nxp,lpc1850-uart", "ns16550a"; reg = <0x40081000 0x1000>; -- 1.8.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html