devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
To: lee.jones@linaro.org, cw00.choi@samsung.com
Cc: robh+dt@kernel.org, pawel.moll@arm.com, mark.rutland@arm.com,
	ijc+devicetree@hellion.org.uk, galak@codeaurora.org,
	myungjoo.ham@samsung.com, broonie@kernel.org,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	patches@opensource.wolfsonmicro.com
Subject: [PATCH v2 4/5] mfd: arizona: Update DT binding documentation for mic detection
Date: Fri, 2 Oct 2015 17:29:22 +0100	[thread overview]
Message-ID: <1443803363-3251-5-git-send-email-ckeepax@opensource.wolfsonmicro.com> (raw)
In-Reply-To: <1443803363-3251-1-git-send-email-ckeepax@opensource.wolfsonmicro.com>

Add additional bindings to allow configuration of the system specific
microphone detection settings.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
---
 Documentation/devicetree/bindings/mfd/arizona.txt |   21 +++++++++++++++++++++
 include/dt-bindings/mfd/arizona.h                 |    5 +++++
 2 files changed, 26 insertions(+), 0 deletions(-)

diff --git a/Documentation/devicetree/bindings/mfd/arizona.txt b/Documentation/devicetree/bindings/mfd/arizona.txt
index a8fee60..b98a11b 100644
--- a/Documentation/devicetree/bindings/mfd/arizona.txt
+++ b/Documentation/devicetree/bindings/mfd/arizona.txt
@@ -73,6 +73,27 @@ Optional properties:
     If this node is not mentioned or if the value is unknown, then
     headphone detection mode is set to HPDETL.
 
+  - wlf,micd-software-compare : Use a software comparison to determine mic
+    presence
+  - wlf,micd-detect-debounce : Additional software microphone detection
+    debounce specified in milliseconds.
+  - wlf,micd-pol-gpio : GPIO specifier for the GPIO controlling the headset
+    polarity if one exists.
+  - wlf,micd-bias-start-time : Time allowed for MICBIAS to startup prior to
+    performing microphone detection, specified as per the ARIZONA_MICD_TIME_XXX
+    defines.
+  - wlf,micd-rate : Delay between successive microphone detection measurements,
+    specified as per the ARIZONA_MICD_TIME_XXX defines.
+  - wlf,micd-dbtime : Microphone detection hardware debounces specified as the
+    number of measurements to take, valid values being 2 and 4.
+  - wlf,micd-timeout : Timeout for microphone detection, specified in
+    milliseconds.
+  - wlf,micd-force-micbias : Force MICBIAS continuously on during microphone
+    detection.
+
+  - wlf,gpsw : Settings for the general purpose switch, set as one of the
+    ARIZONA_GPSW_XXX defines.
+
   - DCVDD-supply, MICVDD-supply : Power supplies, only need to be specified if
     they are being externally supplied. As covered in
     Documentation/devicetree/bindings/regulator/regulator.txt
diff --git a/include/dt-bindings/mfd/arizona.h b/include/dt-bindings/mfd/arizona.h
index c40f665..dedf46f 100644
--- a/include/dt-bindings/mfd/arizona.h
+++ b/include/dt-bindings/mfd/arizona.h
@@ -110,4 +110,9 @@
 #define ARIZONA_ACCDET_MODE_HPM 4
 #define ARIZONA_ACCDET_MODE_ADC 7
 
+#define ARIZONA_GPSW_OPEN           0
+#define ARIZONA_GPSW_CLOSED         1
+#define ARIZONA_GPSW_CLAMP_ENABLED  2
+#define ARIZONA_GPSW_CLAMP_DISABLED 3
+
 #endif
-- 
1.7.2.5

  parent reply	other threads:[~2015-10-02 16:29 UTC|newest]

Thread overview: 34+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-10-02 16:29 [PATCH v2 0/5] Arizona Extcon Update Device Bindings Charles Keepax
     [not found] ` <1443803363-3251-1-git-send-email-ckeepax-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org>
2015-10-02 16:29   ` [PATCH v2 1/5] extcon: arizona: Add device binding to enable ADC mode micdet Charles Keepax
2015-10-02 16:29 ` [PATCH v2 2/5] extcon: arizona: Add device binding for the general purpose switch Charles Keepax
2015-10-02 16:29 ` [PATCH v2 3/5] extcon: arizona: Add device binding for jack detect polarity inversion Charles Keepax
2015-10-02 16:29 ` Charles Keepax [this message]
2015-10-05 10:02   ` [PATCH v2 4/5] mfd: arizona: Update DT binding documentation for mic detection Lee Jones
2015-10-07 10:00   ` Mark Brown
     [not found]     ` <20151007100017.GB12635-GFdadSzt00ze9xe1eoZjHA@public.gmane.org>
2015-10-07 12:26       ` Lee Jones
2015-10-12  8:45         ` Charles Keepax
2015-10-12 10:16           ` Chanwoo Choi
2015-10-12 10:25             ` Chanwoo Choi
2015-10-13  8:03               ` Lee Jones
2015-10-13 10:11                 ` Chanwoo Choi
2015-10-12 13:43           ` Mark Brown
     [not found]             ` <20151012134309.GE1542-GFdadSzt00ze9xe1eoZjHA@public.gmane.org>
2015-10-13  8:02               ` Lee Jones
2015-10-13 12:14                 ` Charles Keepax
2015-10-13 13:50                   ` Lee Jones
2015-10-13 13:59                     ` Chanwoo Choi
     [not found]                       ` <561D0E4C.4010205-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
2015-10-13 14:09                         ` Chanwoo Choi
2015-10-13 14:18                           ` Lee Jones
2015-10-13 15:23                             ` Charles Keepax
2015-10-13 15:12                 ` Mark Brown
2015-10-14  7:28                   ` Lee Jones
2015-10-14  9:49                     ` Mark Brown
     [not found]                       ` <20151014094903.GP14956-GFdadSzt00ze9xe1eoZjHA@public.gmane.org>
2015-10-14 12:30                         ` Lee Jones
2015-10-14 13:09                           ` Mark Brown
2015-10-14 13:20                             ` Lee Jones
2015-10-13  8:08   ` Lee Jones
2015-10-13 12:15     ` Charles Keepax
2015-10-13 13:43       ` Lee Jones
2015-10-02 16:29 ` [PATCH v2 5/5] mfd: arizona: Update DT binding document for jack detection invert Charles Keepax
2015-10-05 10:01   ` Lee Jones
2015-10-12  8:15     ` Charles Keepax
2015-10-13  8:07       ` Lee Jones

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1443803363-3251-5-git-send-email-ckeepax@opensource.wolfsonmicro.com \
    --to=ckeepax@opensource.wolfsonmicro.com \
    --cc=broonie@kernel.org \
    --cc=cw00.choi@samsung.com \
    --cc=devicetree@vger.kernel.org \
    --cc=galak@codeaurora.org \
    --cc=ijc+devicetree@hellion.org.uk \
    --cc=lee.jones@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=myungjoo.ham@samsung.com \
    --cc=patches@opensource.wolfsonmicro.com \
    --cc=pawel.moll@arm.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).