From mboxrd@z Thu Jan 1 00:00:00 1970 From: Siarhei Siamashka Subject: [PATCH 0/3] ARM: dts: sun4i: USB DRC and voltage-scaling for pcDuino1/2 Date: Sun, 4 Oct 2015 21:58:45 +0300 Message-ID: <1443985128-23137-1-git-send-email-siarhei.siamashka@gmail.com> Reply-To: siarhei.siamashka-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org Mime-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Return-path: List-Post: , List-Help: , List-Archive: , List-Unsubscribe: , To: Maxime Ripard Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, devicetree , linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org, Zoltan HERPAI List-Id: devicetree@vger.kernel.org Hello, This brings LinkSprite pcDuino1/2 boards up to date with the latest kernel features. And the first patch in this set is a bugfix for the PH3/PH6 pins misuse. There is currently a single dts file for pcDuino1 and pcDuino2 boards. They obviously had been designed to be compatible with each other, but have some minor differences, as can be seen when comparing schematics: https://s3.amazonaws.com/pcduino/Hardware/PC+Duino_V01-20130128.pdf https://s3.amazonaws.com/pcduino/Hardware/v2/pcDuino_v2_sch.pdf Siarhei Siamashka (3): ARM: dts: sun4i: Allow to use the PH6 pin for GPIO on pcDuino1/2 ARM: dts: sun4i: Enable USB DRC on pcDuino1/2 ARM: dts: sun4i: Add AXP209 PMU regulators for pcDuino1/2 arch/arm/boot/dts/sun4i-a10-pcduino.dts | 56 +++++++++++++++++++++++++++------ 1 file changed, 46 insertions(+), 10 deletions(-) -- 2.4.9