[PATCH 0/4] leds-bcm6328: several fixes and improvements

[PATCH 0/4] leds-bcm6328: several fixes and improvements

[Álvaro Fernández Rojas]

These patches improve leds-bcm6328 by adding invalid LED printing (like it's done in leds-bcm6358), simplifying default-state handling (once again like it's done in leds-bcm6358), and adding more init configuration options.

Álvaro Fernández Rojas (4):
  leds-bcm6328: print invalid LED
  leds-bcm6328: simplify and improve default-state handling
  leds-bcm6328: add more init configuration options
  Documentation: leds: update DT bindings for leds-bcm6328

 .../devicetree/bindings/leds/leds-bcm6328.txt      | 10 ++++++
 drivers/leds/leds-bcm6328.c                        | 41 ++++++++++++++++------
 2 files changed, 40 insertions(+), 11 deletions(-)

-- 
1.9.1

[PATCH 1/4] leds-bcm6328: print invalid LED

[Álvaro Fernández Rojas]

Print invalid LED instead of warning only about maximum LED value.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
---
 drivers/leds/leds-bcm6328.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/leds/leds-bcm6328.c b/drivers/leds/leds-bcm6328.c
index 986fe1e..5daf7be 100644
--- a/drivers/leds/leds-bcm6328.c
+++ b/drivers/leds/leds-bcm6328.c
@@ -373,7 +373,7 @@ static int bcm6328_leds_probe(struct platform_device *pdev)
 			continue;
 
 		if (reg >= BCM6328_LED_MAX_COUNT) {
-			dev_err(dev, "invalid LED (>= %d)\n",
+			dev_err(dev, "invalid LED (%u >= %d)\n", reg,
 				BCM6328_LED_MAX_COUNT);
 			continue;
 		}
-- 
1.9.1

[PATCH 2/4] leds-bcm6328: simplify and improve default-state handling

[Álvaro Fernández Rojas]

This patch simplifies and improves the code related to
default-state handling.
It also changes the code to power off the LEDs by default.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
---
 drivers/leds/leds-bcm6328.c | 24 +++++++++++++++---------
 1 file changed, 15 insertions(+), 9 deletions(-)

diff --git a/drivers/leds/leds-bcm6328.c b/drivers/leds/leds-bcm6328.c
index 5daf7be..4de8a85 100644
--- a/drivers/leds/leds-bcm6328.c
+++ b/drivers/leds/leds-bcm6328.c
@@ -281,11 +281,10 @@ static int bcm6328_led(struct device *dev, struct device_node *nc, u32 reg,
 						    "linux,default-trigger",
 						    NULL);
 
+	spin_lock_irqsave(lock, flags);
 	if (!of_property_read_string(nc, "default-state", &state)) {
-		spin_lock_irqsave(lock, flags);
 		if (!strcmp(state, "on")) {
 			led->cdev.brightness = LED_FULL;
-			bcm6328_led_mode(led, BCM6328_LED_MODE_ON);
 		} else if (!strcmp(state, "keep")) {
 			void __iomem *mode;
 			unsigned long val, shift;
@@ -296,21 +295,28 @@ static int bcm6328_led(struct device *dev, struct device_node *nc, u32 reg,
 			else
 				mode = mem + BCM6328_REG_MODE_LO;
 
-			val = bcm6328_led_read(mode) >> (shift % 16);
+			val = bcm6328_led_read(mode) >>
+			      BCM6328_LED_SHIFT(shift % 16);
 			val &= BCM6328_LED_MODE_MASK;
-			if (val == BCM6328_LED_MODE_ON)
+			if ((led->active_low && val == BCM6328_LED_MODE_ON) ||
+			    (!led->active_low && val == BCM6328_LED_MODE_OFF))
 				led->cdev.brightness = LED_FULL;
-			else {
+			else
 				led->cdev.brightness = LED_OFF;
-				bcm6328_led_mode(led, BCM6328_LED_MODE_OFF);
-			}
 		} else {
 			led->cdev.brightness = LED_OFF;
-			bcm6328_led_mode(led, BCM6328_LED_MODE_OFF);
 		}
-		spin_unlock_irqrestore(lock, flags);
+	} else {
+		led->cdev.brightness = LED_OFF;
 	}
 
+	if ((led->active_low && led->cdev.brightness == LED_FULL) ||
+	    (!led->active_low && led->cdev.brightness == LED_OFF))
+		bcm6328_led_mode(led, BCM6328_LED_MODE_ON);
+	else
+		bcm6328_led_mode(led, BCM6328_LED_MODE_OFF);
+	spin_unlock_irqrestore(lock, flags);
+
 	led->cdev.brightness_set = bcm6328_led_set;
 	led->cdev.blink_set = bcm6328_blink_set;
 
-- 
1.9.1

[PATCH 3/4] leds-bcm6328: add more init configuration options

[Álvaro Fernández Rojas]

This patch adds more init register configuration options:
- Serial LEDs multiplexing.
- Serial LEDs clock signal low/high polarity.
- Serial LEDs data signal low/high polarity.
- Serial LEDs shift direction inverted/normal.

Signed-off-by: Álvaro Fernández Rojas <noltari-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
 drivers/leds/leds-bcm6328.c | 15 ++++++++++++++-
 1 file changed, 14 insertions(+), 1 deletion(-)

diff --git a/drivers/leds/leds-bcm6328.c b/drivers/leds/leds-bcm6328.c
index 4de8a85..898a804 100644
--- a/drivers/leds/leds-bcm6328.c
+++ b/drivers/leds/leds-bcm6328.c
@@ -41,6 +41,11 @@
 #define BCM6328_SERIAL_LED_SHIFT_DIR	BIT(16)
 #define BCM6328_LED_SHIFT_TEST		BIT(30)
 #define BCM6328_LED_TEST		BIT(31)
+#define BCM6328_INIT_MASK		(BCM6328_SERIAL_LED_EN | \
+					 BCM6328_SERIAL_LED_MUX  | \
+					 BCM6328_SERIAL_LED_CLK_NPOL | \
+					 BCM6328_SERIAL_LED_DATA_PPOL | \
+					 BCM6328_SERIAL_LED_SHIFT_DIR)
 
 #define BCM6328_LED_MODE_MASK		3
 #define BCM6328_LED_MODE_OFF		0
@@ -366,9 +371,17 @@ static int bcm6328_leds_probe(struct platform_device *pdev)
 	bcm6328_led_write(mem + BCM6328_REG_LNKACTSEL_LO, 0);
 
 	val = bcm6328_led_read(mem + BCM6328_REG_INIT);
-	val &= ~BCM6328_SERIAL_LED_EN;
+	val &= ~(BCM6328_INIT_MASK);
 	if (of_property_read_bool(np, "brcm,serial-leds"))
 		val |= BCM6328_SERIAL_LED_EN;
+	if (of_property_read_bool(np, "brcm,serial-mux"))
+		val |= BCM6328_SERIAL_LED_MUX;
+	if (of_property_read_bool(np, "brcm,serial-clk-low"))
+		val |= BCM6328_SERIAL_LED_CLK_NPOL;
+	if (!of_property_read_bool(np, "brcm,serial-dat-low"))
+		val |= BCM6328_SERIAL_LED_DATA_PPOL;
+	if (!of_property_read_bool(np, "brcm,serial-shift-inv"))
+		val |= BCM6328_SERIAL_LED_SHIFT_DIR;
 	bcm6328_led_write(mem + BCM6328_REG_INIT, val);
 
 	for_each_available_child_of_node(np, child) {
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 4/4] Documentation: leds: update DT bindings for leds-bcm6328

[Álvaro Fernández Rojas]

This patch adds latest DT bindings for leds-bcm6328 init register
configuration.

Signed-off-by: Álvaro Fernández Rojas <noltari-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
 Documentation/devicetree/bindings/leds/leds-bcm6328.txt | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/Documentation/devicetree/bindings/leds/leds-bcm6328.txt b/Documentation/devicetree/bindings/leds/leds-bcm6328.txt
index f9e36ad..3f48c1e 100644
--- a/Documentation/devicetree/bindings/leds/leds-bcm6328.txt
+++ b/Documentation/devicetree/bindings/leds/leds-bcm6328.txt
@@ -29,6 +29,14 @@ Required properties:
 Optional properties:
   - brcm,serial-leds : Boolean, enables Serial LEDs.
     Default : false
+  - brcm,serial-mux : Boolean, enables Serial LEDs multiplexing.
+    Default : false
+  - brcm,serial-clk-low : Boolean, makes clock signal active low.
+    Default : false
+  - brcm,serial-dat-low : Boolean, makes data signal active low.
+    Default : false
+  - brcm,serial-shift-inv : Boolean, inverts Serial LEDs shift direction.
+    Default : false
 
 Each LED is represented as a sub-node of the brcm,bcm6328-leds device.
 
@@ -110,6 +118,8 @@ Scenario 2 : BCM63268 with Serial/GPHY0 LEDs
 		#size-cells = <0>;
 		reg = <0x10001900 0x24>;
 		brcm,serial-leds;
+		brcm,serial-dat-low;
+		brcm,serial-shift-inv;
 
 		gphy0_spd0@0 {
 			reg = <0>;
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 0/4] leds-bcm6328: several fixes and improvements

[Jacek Anaszewski]

Hi Alvaro,

Thanks for the patches, merged.

Best Regards,
Jacek Anaszewski

On 10/08/2015 12:35 PM, Álvaro Fernández Rojas wrote:
> These patches improve leds-bcm6328 by adding invalid LED printing (like it's done in leds-bcm6358), simplifying default-state handling (once again like it's done in leds-bcm6358), and adding more init configuration options.
>
> Álvaro Fernández Rojas (4):
>    leds-bcm6328: print invalid LED
>    leds-bcm6328: simplify and improve default-state handling
>    leds-bcm6328: add more init configuration options
>    Documentation: leds: update DT bindings for leds-bcm6328
>
>   .../devicetree/bindings/leds/leds-bcm6328.txt      | 10 ++++++
>   drivers/leds/leds-bcm6328.c                        | 41 ++++++++++++++++------
>   2 files changed, 40 insertions(+), 11 deletions(-)
>