From mboxrd@z Thu Jan 1 00:00:00 1970 From: Rob Herring Subject: [PATCH v2 02/13] arc: use common make variables for dtb builds Date: Thu, 8 Oct 2015 12:53:36 -0500 Message-ID: <1444326827-3565-3-git-send-email-robh@kernel.org> References: <1444326827-3565-1-git-send-email-robh@kernel.org> Return-path: In-Reply-To: <1444326827-3565-1-git-send-email-robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org> Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org Cc: Grant Likely , Frank Rowand , Ian Campbell , Geert Uytterhoeven , Olof Johansson , Vineet Gupta List-Id: devicetree@vger.kernel.org Use dtb-y and always make variables to build dtbs instead of explicit dtbs rule. This is in preparation to support building all dtbs. Signed-off-by: Rob Herring Cc: Vineet Gupta --- arch/arc/Makefile | 2 +- arch/arc/boot/dts/Makefile | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arc/Makefile b/arch/arc/Makefile index 8a27a48..cf0cf34 100644 --- a/arch/arc/Makefile +++ b/arch/arc/Makefile @@ -121,7 +121,7 @@ $(boot_targets): vmlinux $(Q)$(MAKE) $(build)=$(boot)/dts $(boot)/dts/$@ dtbs: scripts - $(Q)$(MAKE) $(build)=$(boot)/dts dtbs + $(Q)$(MAKE) $(build)=$(boot)/dts archclean: $(Q)$(MAKE) $(clean)=$(boot) diff --git a/arch/arc/boot/dts/Makefile b/arch/arc/boot/dts/Makefile index b0e3f19..e8e46f9 100644 --- a/arch/arc/boot/dts/Makefile +++ b/arch/arc/boot/dts/Makefile @@ -6,10 +6,10 @@ ifneq ($(CONFIG_ARC_BUILTIN_DTB_NAME),"") endif obj-y += $(builtindtb-y).dtb.o -targets += $(builtindtb-y).dtb +dtb-y := $(builtindtb-y).dtb .SECONDARY: $(obj)/$(builtindtb-y).dtb.S -dtbs: $(addprefix $(obj)/, $(builtindtb-y).dtb) +always := $(dtb-y) clean-files := *.dtb *.dtb.S -- 2.1.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html