From: Eric Anholt <eric@anholt.net>
To: dri-devel@lists.freedesktop.org
Cc: devicetree@vger.kernel.org,
Derek Foreman <derekf@osg.samsung.com>,
Stephen Warren <swarren@wwwdotorg.org>,
Lee Jones <lee@kernel.org>,
linux-kernel@vger.kernel.org,
linux-rpi-kernel@lists.infradead.org,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 4/7] drm/vc4: Use the fbdev_cma helpers
Date: Fri, 9 Oct 2015 14:27:45 -0700 [thread overview]
Message-ID: <1444426068-15817-5-git-send-email-eric@anholt.net> (raw)
In-Reply-To: <1444426068-15817-1-git-send-email-eric@anholt.net>
From: Derek Foreman <derekf@osg.samsung.com>
Keep the fbdev_cma pointer around so we can use it on hotplog and close
to ensure the frame buffer console is in a useful state.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
---
drivers/gpu/drm/vc4/vc4_drv.c | 14 ++++++++++++++
drivers/gpu/drm/vc4/vc4_drv.h | 2 ++
drivers/gpu/drm/vc4/vc4_kms.c | 18 +++++++++++++++---
3 files changed, 31 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/vc4/vc4_drv.c b/drivers/gpu/drm/vc4/vc4_drv.c
index 3c3ccff..6e73060 100644
--- a/drivers/gpu/drm/vc4/vc4_drv.c
+++ b/drivers/gpu/drm/vc4/vc4_drv.c
@@ -14,6 +14,7 @@
#include <linux/module.h>
#include <linux/of_platform.h>
#include <linux/platform_device.h>
+#include "drm_fb_cma_helper.h"
#include "vc4_drv.h"
#include "vc4_regs.h"
@@ -49,6 +50,14 @@ static void vc4_drm_preclose(struct drm_device *dev, struct drm_file *file)
vc4_cancel_page_flip(crtc, file);
}
+static void vc4_lastclose(struct drm_device *dev)
+{
+ struct vc4_dev *vc4 = to_vc4_dev(dev);
+
+ if (vc4->fbdev)
+ drm_fbdev_cma_restore_mode(vc4->fbdev);
+}
+
static const struct file_operations vc4_drm_fops = {
.owner = THIS_MODULE,
.open = drm_open,
@@ -71,6 +80,7 @@ static struct drm_driver vc4_drm_driver = {
DRIVER_ATOMIC |
DRIVER_GEM |
DRIVER_PRIME),
+ .lastclose = vc4_lastclose,
.preclose = vc4_drm_preclose,
.enable_vblank = vc4_enable_vblank,
@@ -199,6 +209,10 @@ static void vc4_drm_unbind(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
struct drm_device *drm = platform_get_drvdata(pdev);
+ struct vc4_dev *vc4 = to_vc4_dev(drm);
+
+ if (vc4->fbdev)
+ drm_fbdev_cma_fini(vc4->fbdev);
drm_mode_config_cleanup(drm);
diff --git a/drivers/gpu/drm/vc4/vc4_drv.h b/drivers/gpu/drm/vc4/vc4_drv.h
index c710e03..23e7bac2 100644
--- a/drivers/gpu/drm/vc4/vc4_drv.h
+++ b/drivers/gpu/drm/vc4/vc4_drv.h
@@ -15,6 +15,8 @@ struct vc4_dev {
struct vc4_hdmi *hdmi;
struct vc4_hvs *hvs;
struct vc4_crtc *crtc[3];
+
+ struct drm_fbdev_cma *fbdev;
};
static inline struct vc4_dev *
diff --git a/drivers/gpu/drm/vc4/vc4_kms.c b/drivers/gpu/drm/vc4/vc4_kms.c
index c241c8f..ee3e004 100644
--- a/drivers/gpu/drm/vc4/vc4_kms.c
+++ b/drivers/gpu/drm/vc4/vc4_kms.c
@@ -21,7 +21,16 @@
#include "drm_fb_cma_helper.h"
#include "vc4_drv.h"
+static void vc4_output_poll_changed(struct drm_device *dev)
+{
+ struct vc4_dev *vc4 = to_vc4_dev(dev);
+
+ if (vc4->fbdev)
+ drm_fbdev_cma_hotplug_event(vc4->fbdev);
+}
+
static const struct drm_mode_config_funcs vc4_mode_funcs = {
+ .output_poll_changed = vc4_output_poll_changed,
.atomic_check = drm_atomic_helper_check,
.atomic_commit = drm_atomic_helper_commit,
.fb_create = drm_fb_cma_create,
@@ -29,6 +38,7 @@ static const struct drm_mode_config_funcs vc4_mode_funcs = {
int vc4_kms_load(struct drm_device *dev)
{
+ struct vc4_dev *vc4 = to_vc4_dev(dev);
int ret;
ret = drm_vblank_init(dev, dev->mode_config.num_crtc);
@@ -44,9 +54,11 @@ int vc4_kms_load(struct drm_device *dev)
drm_mode_config_reset(dev);
- drm_fbdev_cma_init(dev, 32,
- dev->mode_config.num_crtc,
- dev->mode_config.num_connector);
+ vc4->fbdev = drm_fbdev_cma_init(dev, 32,
+ dev->mode_config.num_crtc,
+ dev->mode_config.num_connector);
+ if (IS_ERR(vc4->fbdev))
+ vc4->fbdev = NULL;
drm_kms_helper_poll_init(dev);
--
2.1.4
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2015-10-09 21:27 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-09 21:27 bcm2835 (Raspberry Pi) KMS driver Eric Anholt
2015-10-09 21:27 ` [PATCH v3 1/7] drm/vc4: Add devicetree bindings for VC4 Eric Anholt
[not found] ` <1444426068-15817-2-git-send-email-eric-WhKQ6XTQaPysTnJN9+BGXg@public.gmane.org>
2015-10-09 23:31 ` Sebastian Reichel
2015-10-13 17:59 ` Eric Anholt
2015-10-13 13:26 ` Rob Herring
2015-10-13 18:17 ` Eric Anholt
2015-10-13 21:56 ` Rob Herring
2015-10-21 8:57 ` Eric Anholt
2015-10-21 22:08 ` Rob Herring
2015-10-09 21:27 ` [PATCH v3 2/7] MAINTAINERS: Add myself for the new VC4 (RPi GPU) graphics driver Eric Anholt
2015-10-09 22:12 ` Emil Velikov
2015-10-09 23:13 ` Eric Anholt
2015-10-09 21:27 ` [PATCH v3 3/7] drm/vc4: Add KMS support for Raspberry Pi Eric Anholt
[not found] ` <1444426068-15817-4-git-send-email-eric-WhKQ6XTQaPysTnJN9+BGXg@public.gmane.org>
2015-10-11 14:02 ` Stefan Wahren
2015-10-13 18:19 ` Eric Anholt
[not found] ` <87io6a3a34.fsf-omZaPlIz5HhaEpDpdNBo/KxOck334EZe@public.gmane.org>
2015-10-13 18:50 ` Stefan Wahren
2015-10-13 19:01 ` Stefan Wahren
2015-10-09 21:27 ` Eric Anholt [this message]
2015-10-09 21:27 ` [PATCH v3 5/7] drm/vc4: Allow vblank to be disabled Eric Anholt
2015-10-09 21:27 ` [PATCH v3 6/7] ARM: bcm2835: Add the DDC I2C controller to the device tree Eric Anholt
2015-10-09 21:27 ` [PATCH v3 7/7] ARM: bcm2835: Add VC4 " Eric Anholt
2015-10-11 14:23 ` Stefan Wahren
2015-10-12 20:57 ` Eric Anholt
[not found] ` <1444426068-15817-1-git-send-email-eric-WhKQ6XTQaPysTnJN9+BGXg@public.gmane.org>
2015-10-11 12:39 ` bcm2835 (Raspberry Pi) KMS driver Stefan Wahren
[not found] ` <561A587D.6020009-saaNCTdWVBT7BZbvpMY5sg@public.gmane.org>
2015-10-12 20:39 ` Stephen Warren
2015-10-12 20:53 ` Eric Anholt
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1444426068-15817-5-git-send-email-eric@anholt.net \
--to=eric@anholt.net \
--cc=derekf@osg.samsung.com \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=lee@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rpi-kernel@lists.infradead.org \
--cc=swarren@wwwdotorg.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).