From: John Garry <john.garry-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
To: James.Bottomley-d9PhHud1JfjCXq6kfMZ53/egYHeGw8Jk@public.gmane.org
Cc: linux-kernel-u79uwXL29TZ19SzzRMN9sA@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
arnd-r2nGTMty4D4@public.gmane.org,
linuxarm-hv44wF8Li93QT0dZR+AlfA@public.gmane.org,
zhangfei.gao-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
linux-scsi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
xuwei5-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org,
john.garry2-s/0ZXS5h9803lw97EnAbAg@public.gmane.org,
hare-l3A5Bk7waGM@public.gmane.org,
John Garry <john.garry-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
Subject: [PATCH 01/25] [SCSI] sas: centralise ssp frame information units
Date: Mon, 12 Oct 2015 23:20:13 +0800 [thread overview]
Message-ID: <1444663237-238302-2-git-send-email-john.garry@huawei.com> (raw)
In-Reply-To: <1444663237-238302-1-git-send-email-john.garry-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
The xfer_rdy, command, and task frame's iu structures
are not available in <scsi/sas.h>, but only aic94xx
driver folder.
Add them to include/scsi/sas.h
Signed-off-by: John Garry <john.garry-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
---
drivers/scsi/aic94xx/aic94xx_sas.h | 49 ++++---------------------
include/scsi/sas.h | 74 ++++++++++++++++++++++++++++++++++++++
2 files changed, 80 insertions(+), 43 deletions(-)
diff --git a/drivers/scsi/aic94xx/aic94xx_sas.h b/drivers/scsi/aic94xx/aic94xx_sas.h
index 912e6b7..101072c 100644
--- a/drivers/scsi/aic94xx/aic94xx_sas.h
+++ b/drivers/scsi/aic94xx/aic94xx_sas.h
@@ -327,46 +327,9 @@ struct scb_header {
#define LUN_SIZE 8
-/* See SAS spec, task IU
- */
-struct ssp_task_iu {
- u8 lun[LUN_SIZE]; /* BE */
- u16 _r_a;
- u8 tmf;
- u8 _r_b;
- __be16 tag; /* BE */
- u8 _r_c[14];
-} __attribute__ ((packed));
-
-/* See SAS spec, command IU
- */
-struct ssp_command_iu {
- u8 lun[LUN_SIZE];
- u8 _r_a;
- u8 efb_prio_attr; /* enable first burst, task prio & attr */
-#define EFB_MASK 0x80
-#define TASK_PRIO_MASK 0x78
-#define TASK_ATTR_MASK 0x07
-
- u8 _r_b;
- u8 add_cdb_len; /* in dwords, since bit 0,1 are reserved */
- union {
- u8 cdb[16];
- struct {
- __le64 long_cdb_addr; /* bus address, LE */
- __le32 long_cdb_size; /* LE */
- u8 _r_c[3];
- u8 eol_ds; /* eol:6,6, ds:5,4 */
- } long_cdb; /* sequencer extension */
- };
-} __attribute__ ((packed));
-
-struct xfer_rdy_iu {
- __be32 requested_offset; /* BE */
- __be32 write_data_len; /* BE */
- __be32 _r_a;
-} __attribute__ ((packed));
-
+#define EFB_MASK 0x80
+#define TASK_PRIO_MASK 0x78
+#define TASK_ATTR_MASK 0x07
/* ---------- SCB tasks ---------- */
/* This is both ssp_task and long_ssp_task
@@ -511,7 +474,7 @@ struct abort_task {
u8 proto_conn_rate;
__le32 _r_a;
struct ssp_frame_hdr ssp_frame;
- struct ssp_task_iu ssp_task;
+ struct ssp_tmf_iu ssp_task;
__le16 sister_scb;
__le16 conn_handle;
u8 flags; /* ovrd_itnl_timer:3,3, suspend_data_trans:2,2 */
@@ -549,7 +512,7 @@ struct clear_nexus {
u8 _r_b[3];
u8 conn_mask;
u8 _r_c[19];
- struct ssp_task_iu ssp_task; /* LUN and TAG */
+ struct ssp_tmf_iu ssp_task; /* LUN and TAG */
__le16 _r_d;
__le16 conn_handle;
__le64 _r_e;
@@ -562,7 +525,7 @@ struct initiate_ssp_tmf {
u8 proto_conn_rate;
__le32 _r_a;
struct ssp_frame_hdr ssp_frame;
- struct ssp_task_iu ssp_task;
+ struct ssp_tmf_iu ssp_task;
__le16 sister_scb;
__le16 conn_handle;
u8 flags; /* itnl override and suspend data tx */
diff --git a/include/scsi/sas.h b/include/scsi/sas.h
index 0d2607d..42a84ef 100644
--- a/include/scsi/sas.h
+++ b/include/scsi/sas.h
@@ -344,6 +344,43 @@ struct ssp_response_iu {
u8 sense_data[0];
} __attribute__ ((packed));
+struct ssp_command_iu {
+ u8 lun[8];
+ u8 _r_a;
+
+ union {
+ struct {
+ u8 attr:3;
+ u8 prio:4;
+ u8 efb:1;
+ };
+ u8 efb_prio_attr;
+ };
+
+ u8 _r_b;
+
+ u8 _r_c:2;
+ u8 add_cdb_len:6;
+
+ u8 cdb[16];
+ u8 add_cdb[0];
+} __attribute__ ((packed));
+
+struct xfer_rdy_iu {
+ __be32 requested_offset;
+ __be32 write_data_len;
+ __be32 _r_a;
+} __attribute__ ((packed));
+
+struct ssp_tmf_iu {
+ u8 lun[8];
+ u16 _r_a;
+ u8 tmf;
+ u8 _r_b;
+ __be16 tag;
+ u8 _r_c[14];
+} __attribute__ ((packed));
+
/* ---------- SMP ---------- */
struct report_general_resp {
@@ -538,6 +575,43 @@ struct ssp_response_iu {
u8 sense_data[0];
} __attribute__ ((packed));
+struct ssp_command_iu {
+ u8 lun[8];
+ u8 _r_a;
+
+ union {
+ struct {
+ u8 efb:1;
+ u8 prio:4;
+ u8 attr:3;
+ };
+ u8 efb_prio_attr;
+ };
+
+ u8 _r_b;
+
+ u8 add_cdb_len:6;
+ u8 _r_c:2;
+
+ u8 cdb[16];
+ u8 add_cdb[0];
+} __attribute__ ((packed));
+
+struct xfer_rdy_iu {
+ __be32 requested_offset;
+ __be32 write_data_len;
+ __be32 _r_a;
+} __attribute__ ((packed));
+
+struct ssp_tmf_iu {
+ u8 lun[8];
+ u16 _r_a;
+ u8 tmf;
+ u8 _r_b;
+ __be16 tag;
+ u8 _r_c[14];
+} __attribute__ ((packed));
+
/* ---------- SMP ---------- */
struct report_general_resp {
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2015-10-12 15:20 UTC|newest]
Thread overview: 79+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-12 15:20 [PATCH 00/25] HiSilicon SAS driver John Garry
[not found] ` <1444663237-238302-1-git-send-email-john.garry-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
2015-10-12 15:20 ` John Garry [this message]
2015-10-12 15:20 ` [PATCH 05/25] scsi: hisi_sas: allocate memories and create pools John Garry
[not found] ` <1444663237-238302-6-git-send-email-john.garry-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
2015-10-12 15:15 ` Arnd Bergmann
2015-10-13 9:42 ` zhangfei
2015-10-13 1:05 ` kbuild test robot
2015-10-12 15:20 ` [PATCH 06/25] scsi: hisi_sas: add slot init code John Garry
2015-10-12 15:20 ` [PATCH 09/25] scsi: hisi_sas: add phy SAS ADDR initialization John Garry
2015-10-13 6:12 ` Hannes Reinecke
[not found] ` <561CA0CB.5090802-l3A5Bk7waGM@public.gmane.org>
2015-10-13 17:14 ` John Garry
2015-10-14 8:40 ` Hannes Reinecke
[not found] ` <561E1501.2070507-l3A5Bk7waGM@public.gmane.org>
2015-10-14 15:05 ` John Garry
2015-10-14 15:18 ` Arnd Bergmann
2015-10-15 3:36 ` zhangfei
2015-10-15 8:43 ` Arnd Bergmann
2015-10-12 15:20 ` [PATCH 11/25] scsi: hisi_sas: add v1 hardware register definitions John Garry
2015-10-12 15:20 ` [PATCH 14/25] scsi: hisi_sas: add ssp command function John Garry
2015-10-13 1:24 ` kbuild test robot
2015-10-12 15:20 ` [PATCH 20/25] scsi: hisi_sas: add smp protocol support John Garry
2015-10-12 15:20 ` [PATCH 22/25] scsi: hisi_sas: add tmf methods John Garry
2015-10-12 23:02 ` kbuild test robot
[not found] ` <1444663237-238302-23-git-send-email-john.garry-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
2015-10-12 23:02 ` [RFC PATCH] scsi: hisi_sas: hisi_sas_find_dev_phyno() can be static kbuild test robot
2015-10-12 15:20 ` [PATCH 23/25] scsi: hisi_sas: add control phy handler John Garry
2015-10-19 8:47 ` [PATCH 00/25] HiSilicon SAS driver John Garry
2015-10-19 8:55 ` Hannes Reinecke
[not found] ` <5624B015.3000603-l3A5Bk7waGM@public.gmane.org>
2015-10-19 10:40 ` John Garry
2015-10-12 15:20 ` [PATCH 02/25] devicetree: bindings: scsi: HiSi SAS John Garry
2015-10-16 13:47 ` Rob Herring
[not found] ` <CAL_JsqLk9p_YX2FCNiR4sOSU74asN0UrOSJ5gQfnyRhrFH8LgQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-10-19 10:48 ` John Garry
2015-10-19 14:51 ` zhangfei
2015-10-12 15:20 ` [PATCH 03/25] scsi: hisi_sas: add initial bare driver John Garry
[not found] ` <1444663237-238302-4-git-send-email-john.garry-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
2015-10-15 8:49 ` Xinwei Kong
2015-10-15 9:23 ` John Garry
2015-10-15 9:28 ` zhangfei
[not found] ` <561F707C.1070305-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
2015-10-15 12:07 ` Xinwei Kong
2015-10-12 15:20 ` [PATCH 04/25] scsi: hisi_sas: add scsi host registration John Garry
[not found] ` <1444663237-238302-5-git-send-email-john.garry-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
2015-10-12 15:21 ` Arnd Bergmann
2015-10-13 9:16 ` John Garry
2015-10-13 12:18 ` Arnd Bergmann
2015-10-12 15:20 ` [PATCH 07/25] scsi: hisi_sas: add ioremap for device HW John Garry
2015-10-12 15:21 ` Arnd Bergmann
2015-10-13 9:47 ` zhangfei
[not found] ` <561CD316.6040406-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2015-10-13 12:20 ` Arnd Bergmann
2015-10-13 15:09 ` zhangfei
2015-10-12 17:18 ` kbuild test robot
2015-10-12 17:18 ` [RFC PATCH] scsi: hisi_sas: hisi_sas_ioremap() can be static kbuild test robot
2015-10-12 15:20 ` [PATCH 08/25] scsi: hisi_sas: add cq structure initialization John Garry
2015-10-12 15:20 ` [PATCH 10/25] scsi: hisi_sas: add misc HBA initialization John Garry
2015-10-12 21:44 ` kbuild test robot
2015-10-12 15:20 ` [PATCH 12/25] scsi: hisi_sas: add v1 HW initialisation code John Garry
2015-10-12 18:46 ` Arnd Bergmann
2015-10-13 12:44 ` John Garry
2015-10-13 12:47 ` Arnd Bergmann
2015-10-12 15:20 ` [PATCH 13/25] scsi: hisi_sas: add path from phyup irq to SAS framework John Garry
2015-10-12 22:03 ` kbuild test robot
2015-10-13 0:27 ` Julian Calaby
2015-10-13 0:40 ` [lkp] " Fengguang Wu
2015-10-12 22:03 ` [RFC PATCH] scsi: hisi_sas: hisi_sas_bytes_dmaed() can be static kbuild test robot
2015-10-16 12:55 ` [PATCH 13/25] scsi: hisi_sas: add path from phyup irq to SAS framework Arnd Bergmann
2015-10-16 13:29 ` John Garry
2015-10-16 13:36 ` Arnd Bergmann
2015-10-19 14:11 ` John Garry
2015-10-19 14:26 ` Arnd Bergmann
2015-10-19 14:55 ` John Garry
2015-10-20 8:40 ` Arnd Bergmann
2015-10-20 9:09 ` John Garry
2015-10-12 15:20 ` [PATCH 15/25] scsi: hisi_sas: add cq interrupt handler John Garry
2015-10-12 22:15 ` kbuild test robot
2015-10-12 15:20 ` [PATCH 16/25] scsi: hisi_sas: add dev_found and port_formed John Garry
2015-10-12 22:35 ` kbuild test robot
2015-10-12 22:35 ` [RFC PATCH] scsi: hisi_sas: hisi_sas_alloc_dev() can be static kbuild test robot
2015-10-12 15:20 ` [PATCH 17/25] scsi: hisi_sas: add abnormal irq handler John Garry
2015-10-12 15:20 ` [PATCH 18/25] scsi: hisi_sas: add dev_gone and port_deformed John Garry
[not found] ` <1444663237-238302-19-git-send-email-john.garry-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
2015-10-12 22:49 ` kbuild test robot
2015-10-12 22:49 ` [RFC PATCH] scsi: hisi_sas: hisi_sas_do_release_task() can be static kbuild test robot
2015-10-12 15:20 ` [PATCH 19/25] scsi: hisi_sas: add bcast interrupt handler John Garry
2015-10-12 15:20 ` [PATCH 21/25] scsi: hisi_sas: add scan finished and start John Garry
2015-10-12 15:20 ` [PATCH 24/25] scsi: hisi_sas: add fatal irq handler John Garry
2015-10-12 15:20 ` [PATCH 25/25] MAINTAINERS: add maintainer for HiSi SAS driver John Garry
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1444663237-238302-2-git-send-email-john.garry@huawei.com \
--to=john.garry-hv44wf8li93qt0dzr+alfa@public.gmane.org \
--cc=James.Bottomley-d9PhHud1JfjCXq6kfMZ53/egYHeGw8Jk@public.gmane.org \
--cc=arnd-r2nGTMty4D4@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=hare-l3A5Bk7waGM@public.gmane.org \
--cc=john.garry2-s/0ZXS5h9803lw97EnAbAg@public.gmane.org \
--cc=linux-kernel-u79uwXL29TZ19SzzRMN9sA@public.gmane.org \
--cc=linux-scsi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linuxarm-hv44wF8Li93QT0dZR+AlfA@public.gmane.org \
--cc=xuwei5-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org \
--cc=zhangfei.gao-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).