From: John Garry <john.garry-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
To: James.Bottomley-d9PhHud1JfjCXq6kfMZ53/egYHeGw8Jk@public.gmane.org
Cc: linux-kernel-u79uwXL29TZ19SzzRMN9sA@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
arnd-r2nGTMty4D4@public.gmane.org,
linuxarm-hv44wF8Li93QT0dZR+AlfA@public.gmane.org,
zhangfei.gao-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
linux-scsi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
xuwei5-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org,
john.garry2-s/0ZXS5h9803lw97EnAbAg@public.gmane.org,
hare-l3A5Bk7waGM@public.gmane.org,
John Garry <john.garry-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
Subject: [PATCH 23/25] scsi: hisi_sas: add control phy handler
Date: Mon, 12 Oct 2015 23:20:35 +0800 [thread overview]
Message-ID: <1444663237-238302-24-git-send-email-john.garry@huawei.com> (raw)
In-Reply-To: <1444663237-238302-1-git-send-email-john.garry-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
Add method for lldd_control_phy. Currently link rate
control and spinup hold is unsupported.
Signed-off-by: John Garry <john.garry-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
---
drivers/scsi/hisi_sas/hisi_sas.h | 7 ++++
drivers/scsi/hisi_sas/hisi_sas_init.c | 1 +
drivers/scsi/hisi_sas/hisi_sas_main.c | 64 ++++++++++++++++++++++++++++++++++
drivers/scsi/hisi_sas/hisi_sas_v1_hw.c | 22 ++++++++++++
4 files changed, 94 insertions(+)
diff --git a/drivers/scsi/hisi_sas/hisi_sas.h b/drivers/scsi/hisi_sas/hisi_sas.h
index b488fe3..be91b8c 100644
--- a/drivers/scsi/hisi_sas/hisi_sas.h
+++ b/drivers/scsi/hisi_sas/hisi_sas.h
@@ -133,6 +133,7 @@ struct hisi_sas_tei {
};
enum hisi_sas_wq_event {
+ CONTROL_PHY,
PHYUP,
};
@@ -360,6 +361,9 @@ void hisi_sas_phy_init(struct hisi_hba *hisi_hba, int i);
int hisi_sas_dev_found(struct domain_device *dev);
void hisi_sas_dev_gone(struct domain_device *dev);
int hisi_sas_queue_command(struct sas_task *task, gfp_t gfp_flags);
+int hisi_sas_control_phy(struct asd_sas_phy *sas_phy,
+ enum phy_func func,
+ void *funcdata);
int hisi_sas_abort_task(struct sas_task *task);
int hisi_sas_abort_task_set(struct domain_device *dev, u8 *lun);
int hisi_sas_clear_aca(struct domain_device *dev, u8 *lun);
@@ -375,6 +379,7 @@ void hisi_sas_slot_task_free(struct hisi_hba *hisi_hba, struct sas_task *task,
struct hisi_sas_slot *slot);
/* hw specific functions */
+extern void hard_phy_reset_v1_hw(struct hisi_hba *hisi_hba, int phy_no);
extern int slot_complete_v1_hw(struct hisi_hba *hisi_hba,
struct hisi_sas_slot *slot,
int abort);
@@ -392,8 +397,10 @@ extern int interrupt_openall_v1_hw(struct hisi_hba *hisi_hba);
extern int hw_init_v1_hw(struct hisi_hba *hisi_hba);
extern int free_device_v1_hw(struct hisi_hba *hisi_hba,
struct hisi_sas_device *dev);
+extern void enable_phy_v1_hw(struct hisi_hba *hisi_hba, int phy_no);
extern int phys_init_v1_hw(struct hisi_hba *hisi_hba);
extern void sl_notify_v1_hw(struct hisi_hba *hisi_hba, int phy_no);
extern void setup_itct_v1_hw(struct hisi_hba *hisi_hba,
struct hisi_sas_device *device);
+extern void disable_phy_v1_hw(struct hisi_hba *hisi_hba, int phy_no);
#endif
diff --git a/drivers/scsi/hisi_sas/hisi_sas_init.c b/drivers/scsi/hisi_sas/hisi_sas_init.c
index b6272d8..af4d613e1 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_init.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_init.c
@@ -38,6 +38,7 @@ static struct sas_domain_function_template hisi_sas_transport_ops = {
.lldd_dev_found = hisi_sas_dev_found,
.lldd_dev_gone = hisi_sas_dev_gone,
.lldd_execute_task = hisi_sas_queue_command,
+ .lldd_control_phy = hisi_sas_control_phy,
.lldd_abort_task = hisi_sas_abort_task,
.lldd_abort_task_set = hisi_sas_abort_task_set,
.lldd_clear_aca = hisi_sas_clear_aca,
diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index 12af29c..1e42611 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -472,6 +472,32 @@ int hisi_sas_scan_finished(struct Scsi_Host *shost, unsigned long time)
return 1;
}
+static void hisi_sas_control_phy_work(struct hisi_hba *hisi_hba,
+ int func,
+ int phy_no)
+{
+ struct device *dev = &hisi_hba->pdev->dev;
+
+ switch (func) {
+ case PHY_FUNC_HARD_RESET:
+ hard_phy_reset_v1_hw(hisi_hba, phy_no);
+ break;
+
+ case PHY_FUNC_LINK_RESET:
+ enable_phy_v1_hw(hisi_hba, phy_no);
+ hard_phy_reset_v1_hw(hisi_hba, phy_no);
+ break;
+
+ case PHY_FUNC_DISABLE:
+ disable_phy_v1_hw(hisi_hba, phy_no);
+ break;
+
+ case PHY_FUNC_SET_LINK_RATE:
+ case PHY_FUNC_RELEASE_SPINUP_HOLD:
+ default:
+ dev_err(dev, "Control phy func %d unsupported\n", func);
+ }
+}
static void hisi_sas_phyup_work(struct hisi_hba *hisi_hba,
int phy_no)
@@ -487,8 +513,12 @@ void hisi_sas_wq_process(struct work_struct *work)
struct hisi_hba *hisi_hba = wq->hisi_hba;
int event = wq->event;
int phy_no = wq->phy_no;
+ int func = wq->data;
switch (event) {
+ case CONTROL_PHY:
+ hisi_sas_control_phy_work(hisi_hba, func, phy_no);
+ break;
case PHYUP:
hisi_sas_phyup_work(hisi_hba, phy_no);
break;
@@ -681,6 +711,40 @@ int hisi_sas_queue_command(struct sas_task *task, gfp_t gfp_flags)
return hisi_sas_task_exec(task, gfp_flags, NULL, 0, NULL);
}
+int hisi_sas_control_phy(struct asd_sas_phy *sas_phy,
+ enum phy_func func,
+ void *funcdata)
+{
+ struct sas_ha_struct *sas_ha = sas_phy->ha;
+ struct hisi_hba *hisi_hba = NULL;
+ struct hisi_sas_phy *phy = NULL;
+ int phy_no = 0;
+ struct hisi_sas_wq *wq = kmalloc(sizeof(*wq), GFP_ATOMIC);
+
+ if (!wq)
+ return -ENOMEM;
+
+ while (sas_ha->sas_phy[phy_no]) {
+ if (sas_ha->sas_phy[phy_no] == sas_phy) {
+ hisi_hba = (struct hisi_hba *)sas_ha->lldd_ha;
+ break;
+ }
+ phy_no++;
+ }
+
+ phy = &hisi_hba->phy[phy_no];
+
+ wq->event = CONTROL_PHY;
+ wq->data = func;
+ wq->hisi_hba = hisi_hba;
+ wq->phy_no = phy_no;
+
+ INIT_WORK(&wq->work_struct, hisi_sas_wq_process);
+
+ queue_work(hisi_hba->wq, &wq->work_struct);
+
+ return 0;
+}
static void hisi_sas_task_done(struct sas_task *task)
{
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
index b470c72..b5ba46a 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
@@ -766,6 +766,13 @@ void enable_phy_v1_hw(struct hisi_hba *hisi_hba, int phy_no)
hisi_sas_phy_write32(hisi_hba, phy_no, PHY_CFG, cfg);
}
+void disable_phy_v1_hw(struct hisi_hba *hisi_hba, int phy_no)
+{
+ u32 cfg = hisi_sas_phy_read32(hisi_hba, phy_no, PHY_CFG);
+
+ cfg &= ~PHY_CFG_ENA_MSK;
+ hisi_sas_phy_write32(hisi_hba, phy_no, PHY_CFG, cfg);
+}
static void start_phy_v1_hw(struct hisi_hba *hisi_hba, int phy_no)
{
@@ -775,6 +782,21 @@ static void start_phy_v1_hw(struct hisi_hba *hisi_hba, int phy_no)
enable_phy_v1_hw(hisi_hba, phy_no);
}
+static void stop_phy_v1_hw(struct hisi_hba *hisi_hba, int phy_no)
+{
+ disable_phy_v1_hw(hisi_hba, phy_no);
+}
+
+void hard_phy_reset_v1_hw(struct hisi_hba *hisi_hba, int phy_no)
+{
+ struct sas_ha_struct *sha = &hisi_hba->sha;
+
+ stop_phy_v1_hw(hisi_hba, phy_no);
+ sas_drain_work(sha);
+ msleep(100);
+ start_phy_v1_hw(hisi_hba, phy_no);
+}
+
static void start_phys_v1_hw(unsigned long data)
{
struct hisi_hba *hisi_hba = (struct hisi_hba *)data;
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2015-10-12 15:20 UTC|newest]
Thread overview: 79+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-12 15:20 [PATCH 00/25] HiSilicon SAS driver John Garry
[not found] ` <1444663237-238302-1-git-send-email-john.garry-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
2015-10-12 15:20 ` [PATCH 01/25] [SCSI] sas: centralise ssp frame information units John Garry
2015-10-12 15:20 ` [PATCH 05/25] scsi: hisi_sas: allocate memories and create pools John Garry
[not found] ` <1444663237-238302-6-git-send-email-john.garry-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
2015-10-12 15:15 ` Arnd Bergmann
2015-10-13 9:42 ` zhangfei
2015-10-13 1:05 ` kbuild test robot
2015-10-12 15:20 ` [PATCH 06/25] scsi: hisi_sas: add slot init code John Garry
2015-10-12 15:20 ` [PATCH 09/25] scsi: hisi_sas: add phy SAS ADDR initialization John Garry
2015-10-13 6:12 ` Hannes Reinecke
[not found] ` <561CA0CB.5090802-l3A5Bk7waGM@public.gmane.org>
2015-10-13 17:14 ` John Garry
2015-10-14 8:40 ` Hannes Reinecke
[not found] ` <561E1501.2070507-l3A5Bk7waGM@public.gmane.org>
2015-10-14 15:05 ` John Garry
2015-10-14 15:18 ` Arnd Bergmann
2015-10-15 3:36 ` zhangfei
2015-10-15 8:43 ` Arnd Bergmann
2015-10-12 15:20 ` [PATCH 11/25] scsi: hisi_sas: add v1 hardware register definitions John Garry
2015-10-12 15:20 ` [PATCH 14/25] scsi: hisi_sas: add ssp command function John Garry
2015-10-13 1:24 ` kbuild test robot
2015-10-12 15:20 ` [PATCH 20/25] scsi: hisi_sas: add smp protocol support John Garry
2015-10-12 15:20 ` [PATCH 22/25] scsi: hisi_sas: add tmf methods John Garry
2015-10-12 23:02 ` kbuild test robot
[not found] ` <1444663237-238302-23-git-send-email-john.garry-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
2015-10-12 23:02 ` [RFC PATCH] scsi: hisi_sas: hisi_sas_find_dev_phyno() can be static kbuild test robot
2015-10-12 15:20 ` John Garry [this message]
2015-10-19 8:47 ` [PATCH 00/25] HiSilicon SAS driver John Garry
2015-10-19 8:55 ` Hannes Reinecke
[not found] ` <5624B015.3000603-l3A5Bk7waGM@public.gmane.org>
2015-10-19 10:40 ` John Garry
2015-10-12 15:20 ` [PATCH 02/25] devicetree: bindings: scsi: HiSi SAS John Garry
2015-10-16 13:47 ` Rob Herring
[not found] ` <CAL_JsqLk9p_YX2FCNiR4sOSU74asN0UrOSJ5gQfnyRhrFH8LgQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-10-19 10:48 ` John Garry
2015-10-19 14:51 ` zhangfei
2015-10-12 15:20 ` [PATCH 03/25] scsi: hisi_sas: add initial bare driver John Garry
[not found] ` <1444663237-238302-4-git-send-email-john.garry-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
2015-10-15 8:49 ` Xinwei Kong
2015-10-15 9:23 ` John Garry
2015-10-15 9:28 ` zhangfei
[not found] ` <561F707C.1070305-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
2015-10-15 12:07 ` Xinwei Kong
2015-10-12 15:20 ` [PATCH 04/25] scsi: hisi_sas: add scsi host registration John Garry
[not found] ` <1444663237-238302-5-git-send-email-john.garry-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
2015-10-12 15:21 ` Arnd Bergmann
2015-10-13 9:16 ` John Garry
2015-10-13 12:18 ` Arnd Bergmann
2015-10-12 15:20 ` [PATCH 07/25] scsi: hisi_sas: add ioremap for device HW John Garry
2015-10-12 15:21 ` Arnd Bergmann
2015-10-13 9:47 ` zhangfei
[not found] ` <561CD316.6040406-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2015-10-13 12:20 ` Arnd Bergmann
2015-10-13 15:09 ` zhangfei
2015-10-12 17:18 ` [RFC PATCH] scsi: hisi_sas: hisi_sas_ioremap() can be static kbuild test robot
2015-10-12 17:18 ` [PATCH 07/25] scsi: hisi_sas: add ioremap for device HW kbuild test robot
2015-10-12 15:20 ` [PATCH 08/25] scsi: hisi_sas: add cq structure initialization John Garry
2015-10-12 15:20 ` [PATCH 10/25] scsi: hisi_sas: add misc HBA initialization John Garry
2015-10-12 21:44 ` kbuild test robot
2015-10-12 15:20 ` [PATCH 12/25] scsi: hisi_sas: add v1 HW initialisation code John Garry
2015-10-12 18:46 ` Arnd Bergmann
2015-10-13 12:44 ` John Garry
2015-10-13 12:47 ` Arnd Bergmann
2015-10-12 15:20 ` [PATCH 13/25] scsi: hisi_sas: add path from phyup irq to SAS framework John Garry
2015-10-12 22:03 ` kbuild test robot
2015-10-13 0:27 ` Julian Calaby
2015-10-13 0:40 ` [lkp] " Fengguang Wu
2015-10-12 22:03 ` [RFC PATCH] scsi: hisi_sas: hisi_sas_bytes_dmaed() can be static kbuild test robot
2015-10-16 12:55 ` [PATCH 13/25] scsi: hisi_sas: add path from phyup irq to SAS framework Arnd Bergmann
2015-10-16 13:29 ` John Garry
2015-10-16 13:36 ` Arnd Bergmann
2015-10-19 14:11 ` John Garry
2015-10-19 14:26 ` Arnd Bergmann
2015-10-19 14:55 ` John Garry
2015-10-20 8:40 ` Arnd Bergmann
2015-10-20 9:09 ` John Garry
2015-10-12 15:20 ` [PATCH 15/25] scsi: hisi_sas: add cq interrupt handler John Garry
2015-10-12 22:15 ` kbuild test robot
2015-10-12 15:20 ` [PATCH 16/25] scsi: hisi_sas: add dev_found and port_formed John Garry
2015-10-12 22:35 ` kbuild test robot
2015-10-12 22:35 ` [RFC PATCH] scsi: hisi_sas: hisi_sas_alloc_dev() can be static kbuild test robot
2015-10-12 15:20 ` [PATCH 17/25] scsi: hisi_sas: add abnormal irq handler John Garry
2015-10-12 15:20 ` [PATCH 18/25] scsi: hisi_sas: add dev_gone and port_deformed John Garry
2015-10-12 22:49 ` [RFC PATCH] scsi: hisi_sas: hisi_sas_do_release_task() can be static kbuild test robot
[not found] ` <1444663237-238302-19-git-send-email-john.garry-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
2015-10-12 22:49 ` [PATCH 18/25] scsi: hisi_sas: add dev_gone and port_deformed kbuild test robot
2015-10-12 15:20 ` [PATCH 19/25] scsi: hisi_sas: add bcast interrupt handler John Garry
2015-10-12 15:20 ` [PATCH 21/25] scsi: hisi_sas: add scan finished and start John Garry
2015-10-12 15:20 ` [PATCH 24/25] scsi: hisi_sas: add fatal irq handler John Garry
2015-10-12 15:20 ` [PATCH 25/25] MAINTAINERS: add maintainer for HiSi SAS driver John Garry
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1444663237-238302-24-git-send-email-john.garry@huawei.com \
--to=john.garry-hv44wf8li93qt0dzr+alfa@public.gmane.org \
--cc=James.Bottomley-d9PhHud1JfjCXq6kfMZ53/egYHeGw8Jk@public.gmane.org \
--cc=arnd-r2nGTMty4D4@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=hare-l3A5Bk7waGM@public.gmane.org \
--cc=john.garry2-s/0ZXS5h9803lw97EnAbAg@public.gmane.org \
--cc=linux-kernel-u79uwXL29TZ19SzzRMN9sA@public.gmane.org \
--cc=linux-scsi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linuxarm-hv44wF8Li93QT0dZR+AlfA@public.gmane.org \
--cc=xuwei5-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org \
--cc=zhangfei.gao-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).