From: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
To: broonie@kernel.org, lee.jones@linaro.org, cw00.choi@samsung.com
Cc: myungjoo.ham@samsung.com, lgirdwood@gmail.com,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
patches@opensource.wolfsonmicro.com
Subject: [PATCH v2 2/3] regulator: arizona: Add regulator specific device tree binding document
Date: Thu, 15 Oct 2015 14:47:07 +0100 [thread overview]
Message-ID: <1444916828-8965-2-git-send-email-ckeepax@opensource.wolfsonmicro.com> (raw)
In-Reply-To: <1444916828-8965-1-git-send-email-ckeepax@opensource.wolfsonmicro.com>
Subystem specific bindings for the Arizona devices are being factored
out of the MFD binding document into seperate documents for each
subsystem. This patch adds a binding document that covers the existing
regulator specific bindings.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
---
Changes since v1:
- Added more commit message
Thanks,
Charles
.../bindings/regulator/arizona-regulator.txt | 34 ++++++++++++++++++++
MAINTAINERS | 1 +
2 files changed, 35 insertions(+), 0 deletions(-)
create mode 100644 Documentation/devicetree/bindings/regulator/arizona-regulator.txt
diff --git a/Documentation/devicetree/bindings/regulator/arizona-regulator.txt b/Documentation/devicetree/bindings/regulator/arizona-regulator.txt
new file mode 100644
index 0000000..25bb7f3
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/arizona-regulator.txt
@@ -0,0 +1,34 @@
+Cirrus Logic Arizona class audio SoCs
+
+These devices are audio SoCs with extensive digital capabilities and a range
+of analogue I/O.
+
+This document lists regulator specific bindings, see the primary binding
+document:
+ ../mfd/arizona.txt
+
+Required properties:
+
+ - AVDD-supply, DBVDD1-supply, CPVDD-supply : Power supplies for the device,
+ as covered in regulator.txt
+
+ - DBVDD2-supply, DBVDD3-supply : Additional databus power supplies (wm5102,
+ wm5110, wm8280, wm8998, wm1814)
+
+ - SPKVDDL-supply, SPKVDDR-supply : Speaker driver power supplies (wm5102,
+ wm5110, wm8280, wm8998, wm1814)
+
+ - SPKVDD-supply : Speaker driver power supply (wm8997)
+
+Optional properties:
+ - wlf,ldoena : GPIO specifier for the GPIO controlling LDOENA
+
+ - DCVDD-supply, MICVDD-supply : Power supplies, only need to be specified if
+ they are being externally supplied. As covered in
+ Documentation/devicetree/bindings/regulator/regulator.txt
+
+Optional subnodes:
+ - ldo1 : Initial data for the LDO1 regulator, as covered in
+ Documentation/devicetree/bindings/regulator/regulator.txt
+ - micvdd : Initial data for the MICVDD regulator, as covered in
+ Documentation/devicetree/bindings/regulator/regulator.txt
diff --git a/MAINTAINERS b/MAINTAINERS
index 915f9ec..0e0889b 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -11381,6 +11381,7 @@ W: http://opensource.wolfsonmicro.com/content/linux-drivers-wolfson-devices
S: Supported
F: Documentation/hwmon/wm83??
F: Documentation/devicetree/bindings/extcon/extcon-arizona.txt
+F: Documentation/devicetree/bindings/regulator/arizona-regulator.txt
F: arch/arm/mach-s3c64xx/mach-crag6410*
F: drivers/clk/clk-wm83*.c
F: drivers/extcon/extcon-arizona.c
--
1.7.2.5
next prev parent reply other threads:[~2015-10-15 13:47 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-15 13:47 [PATCH v2 1/3] extcon: arizona: Add extcon specific device tree binding document Charles Keepax
2015-10-15 13:47 ` Charles Keepax [this message]
[not found] ` <1444916828-8965-2-git-send-email-ckeepax-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org>
2015-10-22 12:44 ` [PATCH v2 2/3] regulator: arizona: Add regulator " Mark Brown
[not found] ` <20151022124449.GH8232-GFdadSzt00ze9xe1eoZjHA@public.gmane.org>
2015-10-26 11:28 ` Charles Keepax
[not found] ` <1444916828-8965-1-git-send-email-ckeepax-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org>
2015-10-15 13:47 ` [PATCH v2 3/3] mfd: arizona: Remove bindings covered in new subsystem specific docs Charles Keepax
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1444916828-8965-2-git-send-email-ckeepax@opensource.wolfsonmicro.com \
--to=ckeepax@opensource.wolfsonmicro.com \
--cc=broonie@kernel.org \
--cc=cw00.choi@samsung.com \
--cc=devicetree@vger.kernel.org \
--cc=lee.jones@linaro.org \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=myungjoo.ham@samsung.com \
--cc=patches@opensource.wolfsonmicro.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).