From: Zhou Wang <wangzhou1@hisilicon.com>
To: Bjorn Helgaas <bhelgaas@google.com>,
jingoohan1@gmail.com, pratyush.anand@gmail.com,
Arnd Bergmann <arnd@arndb.de>,
linux@arm.linux.org.uk, thomas.petazzoni@free-electrons.com,
gabriele.paoloni@huawei.com, lorenzo.pieralisi@arm.com,
james.morse@arm.com, Liviu.Dudau@arm.com, jason@lakedaemon.net,
robh@kernel.org, gabriel.fernandez@linaro.org,
Minghuan.Lian@freescale.com
Cc: linux-pci@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
zhangjukuo@huawei.com, qiuzhenfa@hisilicon.com,
liudongdong3@huawei.com, qiujiang@huawei.com,
xuwei5@hisilicon.com, liguozhu@hisilicon.com,
Zhou Wang <wangzhou1@hisilicon.com>
Subject: [PATCH v11 4/6] PCI: hisi: Add PCIe host support for HiSilicon SoC Hip05
Date: Fri, 16 Oct 2015 18:23:39 +0800 [thread overview]
Message-ID: <1444991021-109306-5-git-send-email-wangzhou1@hisilicon.com> (raw)
In-Reply-To: <1444991021-109306-1-git-send-email-wangzhou1@hisilicon.com>
This patch adds PCIe host support for HiSilicon SoC Hip05.
Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Gabriele Paoloni <gabriele.paoloni@huawei.com>
Signed-off-by: liudongdong <liudongdong3@huawei.com>
---
drivers/pci/host/Kconfig | 8 ++
drivers/pci/host/Makefile | 1 +
drivers/pci/host/pcie-hisi.c | 196 +++++++++++++++++++++++++++++++++++++++++++
3 files changed, 205 insertions(+)
create mode 100644 drivers/pci/host/pcie-hisi.c
diff --git a/drivers/pci/host/Kconfig b/drivers/pci/host/Kconfig
index d5e58ba..ae873be 100644
--- a/drivers/pci/host/Kconfig
+++ b/drivers/pci/host/Kconfig
@@ -145,4 +145,12 @@ config PCIE_IPROC_BCMA
Say Y here if you want to use the Broadcom iProc PCIe controller
through the BCMA bus interface
+config PCI_HISI
+ depends on OF && ARM64
+ bool "HiSilicon SoC HIP05 PCIe controller"
+ select PCIEPORTBUS
+ select PCIE_DW
+ help
+ Say Y here if you want PCIe controller support on HiSilicon HIP05 SoC
+
endmenu
diff --git a/drivers/pci/host/Makefile b/drivers/pci/host/Makefile
index 140d66f..ea1dbf2 100644
--- a/drivers/pci/host/Makefile
+++ b/drivers/pci/host/Makefile
@@ -17,3 +17,4 @@ obj-$(CONFIG_PCI_VERSATILE) += pci-versatile.o
obj-$(CONFIG_PCIE_IPROC) += pcie-iproc.o
obj-$(CONFIG_PCIE_IPROC_PLATFORM) += pcie-iproc-platform.o
obj-$(CONFIG_PCIE_IPROC_BCMA) += pcie-iproc-bcma.o
+obj-$(CONFIG_PCI_HISI) += pcie-hisi.o
diff --git a/drivers/pci/host/pcie-hisi.c b/drivers/pci/host/pcie-hisi.c
new file mode 100644
index 0000000..a342a48
--- /dev/null
+++ b/drivers/pci/host/pcie-hisi.c
@@ -0,0 +1,196 @@
+/*
+ * PCIe host controller driver for HiSilicon Hip05 SoC
+ *
+ * Copyright (C) 2015 HiSilicon Co., Ltd. http://www.hisilicon.com
+ *
+ * Author: Zhou Wang <wangzhou1@hisilicon.com>
+ * Dacai Zhu <zhudacai@hisilicon.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/mfd/syscon.h>
+#include <linux/of_address.h>
+#include <linux/of_pci.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#include "pcie-designware.h"
+
+#define PCIE_SUBCTRL_SYS_STATE4_REG 0x6818
+#define PCIE_LTSSM_LINKUP_STATE 0x11
+#define PCIE_LTSSM_STATE_MASK 0x3F
+
+#define to_hisi_pcie(x) container_of(x, struct hisi_pcie, pp)
+
+struct hisi_pcie {
+ struct regmap *subctrl;
+ void __iomem *reg_base;
+ u32 port_id;
+ struct pcie_port pp;
+};
+
+static inline void hisi_pcie_apb_writel(struct hisi_pcie *pcie,
+ u32 val, u32 reg)
+{
+ writel(val, pcie->reg_base + reg);
+}
+
+static inline u32 hisi_pcie_apb_readl(struct hisi_pcie *pcie, u32 reg)
+{
+ return readl(pcie->reg_base + reg);
+}
+
+/* Hip05 PCIe host only supports 32-bit config access */
+static int hisi_pcie_cfg_read(struct pcie_port *pp, int where, int size,
+ u32 *val)
+{
+ u32 reg;
+ u32 reg_val;
+ struct hisi_pcie *pcie = to_hisi_pcie(pp);
+ void *walker = ®_val;
+
+ walker += (where & 0x3);
+ reg = where & ~0x3;
+ reg_val = hisi_pcie_apb_readl(pcie, reg);
+
+ if (size == 1)
+ *val = *(u8 __force *) walker;
+ else if (size == 2)
+ *val = *(u16 __force *) walker;
+ else if (size != 4)
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+/* Hip05 PCIe host only supports 32-bit config access */
+static int hisi_pcie_cfg_write(struct pcie_port *pp, int where, int size,
+ u32 val)
+{
+ u32 reg_val;
+ u32 reg;
+ struct hisi_pcie *pcie = to_hisi_pcie(pp);
+ void *walker = ®_val;
+
+ walker += (where & 0x3);
+ reg = where & ~0x3;
+ if (size == 4)
+ hisi_pcie_apb_writel(pcie, val, reg);
+ else if (size == 2) {
+ reg_val = hisi_pcie_apb_readl(pcie, reg);
+ *(u16 __force *) walker = val;
+ hisi_pcie_apb_writel(pcie, reg_val, reg);
+ } else if (size == 1) {
+ reg_val = hisi_pcie_apb_readl(pcie, reg);
+ *(u8 __force *) walker = val;
+ hisi_pcie_apb_writel(pcie, reg_val, reg);
+ } else
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int hisi_pcie_link_up(struct pcie_port *pp)
+{
+ u32 val;
+ struct hisi_pcie *hisi_pcie = to_hisi_pcie(pp);
+
+ regmap_read(hisi_pcie->subctrl, PCIE_SUBCTRL_SYS_STATE4_REG +
+ 0x100 * hisi_pcie->port_id, &val);
+
+ return ((val & PCIE_LTSSM_STATE_MASK) == PCIE_LTSSM_LINKUP_STATE);
+}
+
+static struct pcie_host_ops hisi_pcie_host_ops = {
+ .rd_own_conf = hisi_pcie_cfg_read,
+ .wr_own_conf = hisi_pcie_cfg_write,
+ .link_up = hisi_pcie_link_up,
+};
+
+static int __init hisi_add_pcie_port(struct pcie_port *pp,
+ struct platform_device *pdev)
+{
+ int ret;
+ u32 port_id;
+ struct hisi_pcie *hisi_pcie = to_hisi_pcie(pp);
+
+ if (of_property_read_u32(pdev->dev.of_node, "port-id", &port_id)) {
+ dev_err(&pdev->dev, "failed to read port-id\n");
+ return -EINVAL;
+ }
+ if (port_id > 3) {
+ dev_err(&pdev->dev, "Invalid port-id: %d\n", port_id);
+ return -EINVAL;
+ }
+ hisi_pcie->port_id = port_id;
+
+ pp->ops = &hisi_pcie_host_ops;
+
+ ret = dw_pcie_host_init(pp);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to initialize host\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static int __init hisi_pcie_probe(struct platform_device *pdev)
+{
+ struct hisi_pcie *hisi_pcie;
+ struct pcie_port *pp;
+ struct resource *reg;
+ int ret;
+
+ hisi_pcie = devm_kzalloc(&pdev->dev, sizeof(*hisi_pcie), GFP_KERNEL);
+ if (!hisi_pcie)
+ return -ENOMEM;
+
+ pp = &hisi_pcie->pp;
+ pp->dev = &pdev->dev;
+
+ hisi_pcie->subctrl =
+ syscon_regmap_lookup_by_compatible("hisilicon,pcie-sas-subctrl");
+ if (IS_ERR(hisi_pcie->subctrl)) {
+ dev_err(pp->dev, "cannot get subctrl base\n");
+ return PTR_ERR(hisi_pcie->subctrl);
+ }
+
+ reg = platform_get_resource_byname(pdev, IORESOURCE_MEM, "rc_dbi");
+ hisi_pcie->reg_base = devm_ioremap_resource(&pdev->dev, reg);
+ if (IS_ERR(hisi_pcie->reg_base)) {
+ dev_err(pp->dev, "cannot get rc_dbi base\n");
+ return PTR_ERR(hisi_pcie->reg_base);
+ }
+
+ hisi_pcie->pp.dbi_base = hisi_pcie->reg_base;
+
+ ret = hisi_add_pcie_port(pp, pdev);
+ if (ret)
+ return ret;
+
+ platform_set_drvdata(pdev, hisi_pcie);
+
+ return 0;
+}
+
+static const struct of_device_id hisi_pcie_of_match[] = {
+ {.compatible = "hisilicon,hip05-pcie",},
+ {},
+};
+
+MODULE_DEVICE_TABLE(of, hisi_pcie_of_match);
+
+static struct platform_driver hisi_pcie_driver = {
+ .probe = hisi_pcie_probe,
+ .driver = {
+ .name = "hisi-pcie",
+ .of_match_table = hisi_pcie_of_match,
+ },
+};
+
+module_platform_driver(hisi_pcie_driver);
--
1.9.1
next prev parent reply other threads:[~2015-10-16 10:23 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-16 10:23 [PATCH v11 0/6] PCI: hisi: Add PCIe host support for HiSilicon SoC Hip05 Zhou Wang
2015-10-16 10:23 ` [PATCH v11 1/6] PCI: designware: move calculation of bus addresses to DRA7xx Zhou Wang
2015-10-21 22:15 ` Bjorn Helgaas
2015-10-22 7:21 ` Gabriele Paoloni
2015-10-22 16:35 ` Bjorn Helgaas
2015-10-22 16:37 ` Gabriele Paoloni
2015-10-26 7:27 ` Zhou Wang
2015-10-16 10:23 ` [PATCH v11 2/6] ARM/PCI: remove align_resource in pci_sys_data Zhou Wang
2015-10-16 10:23 ` [PATCH v11 3/6] PCI: designware: Add ARM64 support Zhou Wang
[not found] ` <1444991021-109306-4-git-send-email-wangzhou1-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org>
2015-10-22 18:28 ` Bjorn Helgaas
2015-10-26 7:37 ` Zhou Wang
2015-10-16 10:23 ` Zhou Wang [this message]
[not found] ` <1444991021-109306-5-git-send-email-wangzhou1-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org>
2015-10-22 18:46 ` [PATCH v11 4/6] PCI: hisi: Add PCIe host support for HiSilicon SoC Hip05 Bjorn Helgaas
2015-10-26 8:24 ` Zhou Wang
2015-10-16 10:23 ` [PATCH v11 5/6] Documentation: DT: Add HiSilicon PCIe host binding Zhou Wang
2015-10-16 10:23 ` [PATCH v11 6/6] MAINTAINERS: Add pcie-hisi maintainer Zhou Wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1444991021-109306-5-git-send-email-wangzhou1@hisilicon.com \
--to=wangzhou1@hisilicon.com \
--cc=Liviu.Dudau@arm.com \
--cc=Minghuan.Lian@freescale.com \
--cc=arnd@arndb.de \
--cc=bhelgaas@google.com \
--cc=devicetree@vger.kernel.org \
--cc=gabriel.fernandez@linaro.org \
--cc=gabriele.paoloni@huawei.com \
--cc=james.morse@arm.com \
--cc=jason@lakedaemon.net \
--cc=jingoohan1@gmail.com \
--cc=liguozhu@hisilicon.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=liudongdong3@huawei.com \
--cc=lorenzo.pieralisi@arm.com \
--cc=pratyush.anand@gmail.com \
--cc=qiujiang@huawei.com \
--cc=qiuzhenfa@hisilicon.com \
--cc=robh@kernel.org \
--cc=thomas.petazzoni@free-electrons.com \
--cc=xuwei5@hisilicon.com \
--cc=zhangjukuo@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).