[RFC v4 11/11] clk: mediatek: Add hdmi_ref HDMI PHY PLL reference clock output

[Philipp Zabel <p.zabel@pengutronix.de>]

The configurable hdmi_ref output of the PLL block is derived from
the tvdpll_594m clock signal via a configurable PLL post-divider.
It is used as the PLL reference input to the HDMI PHY module.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
---
 drivers/clk/mediatek/clk-mt8173.c      | 5 +++++
 include/dt-bindings/clock/mt8173-clk.h | 3 ++-
 2 files changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/mediatek/clk-mt8173.c b/drivers/clk/mediatek/clk-mt8173.c
index e7b3997..fe7a91b 100644
--- a/drivers/clk/mediatek/clk-mt8173.c
+++ b/drivers/clk/mediatek/clk-mt8173.c
@@ -901,6 +901,11 @@ static void __init mtk_apmixedsys_init(struct device_node *node)
 		clk_data->clks[cku->id] = clk;
 	}
 
+	clk = clk_register_divider(NULL, "hdmi_ref", "tvdpll_594m", 0,
+				   base + 0x40, 16, 3, CLK_DIVIDER_POWER_OF_TWO,
+				   NULL);
+	clk_data->clks[CLK_APMIXED_HDMI_REF] = clk;
+
 	r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
 	if (r)
 		pr_err("%s(): could not register clock provider: %d\n",
diff --git a/include/dt-bindings/clock/mt8173-clk.h b/include/dt-bindings/clock/mt8173-clk.h
index bf1302e..784e987 100644
--- a/include/dt-bindings/clock/mt8173-clk.h
+++ b/include/dt-bindings/clock/mt8173-clk.h
@@ -173,7 +173,8 @@
 #define CLK_APMIXED_LVDSPLL		13
 #define CLK_APMIXED_MSDCPLL2		14
 #define CLK_APMIXED_REF2USB_TX		15
-#define CLK_APMIXED_NR_CLK		16
+#define CLK_APMIXED_HDMI_REF		16
+#define CLK_APMIXED_NR_CLK		17
 
 /* INFRA_SYS */
 
-- 
2.6.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel