From: Heiko Schocher <hs@denx.de>
To: linux-kernel@vger.kernel.org
Cc: "Heiko Schocher" <hs@denx.de>,
"Benoît Cousson" <bcousson@baylibre.com>,
"Anant Gole" <anantgole@ti.com>,
devicetree@vger.kernel.org, netdev@vger.kernel.org,
"Marc Kleine-Budde" <mkl@pengutronix.de>,
linux-can@vger.kernel.org, "Tony Lindgren" <tony@atomide.com>,
"Wolfgang Grandegger" <wg@grandegger.com>,
linux-omap@vger.kernel.org
Subject: [PATCH] net, can, ti_hecc: add DT support for the ti,hecc controller
Date: Mon, 19 Oct 2015 08:39:17 +0200 [thread overview]
Message-ID: <1445236757-29019-1-git-send-email-hs@denx.de> (raw)
add DT support for the ti hecc controller, used on
am3517 SoCs.
Signed-off-by: Heiko Schocher <hs@denx.de>
---
.../devicetree/bindings/net/can/ti_hecc-can.txt | 20 ++++++++++
arch/arm/boot/dts/am3517.dtsi | 13 +++++++
drivers/net/can/ti_hecc.c | 45 +++++++++++++++++++++-
3 files changed, 76 insertions(+), 2 deletions(-)
create mode 100644 Documentation/devicetree/bindings/net/can/ti_hecc-can.txt
diff --git a/Documentation/devicetree/bindings/net/can/ti_hecc-can.txt b/Documentation/devicetree/bindings/net/can/ti_hecc-can.txt
new file mode 100644
index 0000000..09fab59
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/can/ti_hecc-can.txt
@@ -0,0 +1,20 @@
+* TI HECC CAN *
+
+Required properties:
+ - compatible: Should be "ti,hecc"
+ - reg: Should contain CAN controller registers location and length
+ - interrupts: Should contain IRQ line for the CAN controller
+
+Example:
+
+ can0: hecc@5c050000 {
+ compatible = "ti,hecc";
+ reg = <0x5c050000 0x4000>;
+ interrupts = <24>;
+ ti,hecc_scc_offset = <0>;
+ ti,hecc_scc_ram_offset = <0x3000>;
+ ti,hecc_ram_offset = <0x3000>;
+ ti,hecc_mbx_offset = <0x2000>;
+ ti,hecc_int_line = <0>;
+ ti,hecc_version = <1>;
+ };
diff --git a/arch/arm/boot/dts/am3517.dtsi b/arch/arm/boot/dts/am3517.dtsi
index 5e3f5e8..47bc429 100644
--- a/arch/arm/boot/dts/am3517.dtsi
+++ b/arch/arm/boot/dts/am3517.dtsi
@@ -25,6 +25,19 @@
interrupt-names = "mc";
};
+ can0: hecc@5c050000 {
+ compatible = "ti,hecc";
+ reg = <0x5c050000 0x4000>;
+ interrupts = <24>;
+ ti,hecc_scc_offset = <0>;
+ ti,hecc_scc_ram_offset = <0x3000>;
+ ti,hecc_ram_offset = <0x3000>;
+ ti,hecc_mbx_offset = <0x2000>;
+ ti,hecc_int_line = <0>;
+ ti,hecc_version = <1>;
+ status = "disabled";
+ };
+
davinci_emac: ethernet@0x5c000000 {
compatible = "ti,am3517-emac";
ti,hwmods = "davinci_emac";
diff --git a/drivers/net/can/ti_hecc.c b/drivers/net/can/ti_hecc.c
index c08e8ea..f1705d5 100644
--- a/drivers/net/can/ti_hecc.c
+++ b/drivers/net/can/ti_hecc.c
@@ -875,16 +875,56 @@ static const struct net_device_ops ti_hecc_netdev_ops = {
.ndo_change_mtu = can_change_mtu,
};
+#if defined(CONFIG_OF)
+static const struct of_device_id ti_hecc_can_dt_ids[] = {
+ {
+ .compatible = "ti,hecc",
+ }, {
+ /* sentinel */
+ }
+};
+MODULE_DEVICE_TABLE(of, ti_hecc_can_dt_ids);
+#endif
+
+static const struct ti_hecc_platform_data
+*ti_hecc_can_get_driver_data(struct platform_device *pdev)
+{
+ if (pdev->dev.of_node) {
+ struct ti_hecc_platform_data *data;
+ struct device_node *np = pdev->dev.of_node;
+
+ data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return NULL;
+
+ of_property_read_u32(np, "ti,hecc_scc_offset",
+ &data->scc_hecc_offset);
+ of_property_read_u32(np, "ti,hecc_scc_ram_offset",
+ &data->scc_ram_offset);
+ of_property_read_u32(np, "ti,hecc_ram_offset",
+ &data->hecc_ram_offset);
+ of_property_read_u32(np, "ti,hecc_mbx_offset",
+ &data->mbx_offset);
+ of_property_read_u32(np, "ti,hecc_int_line",
+ &data->int_line);
+ of_property_read_u32(np, "ti,hecc_version",
+ &data->version);
+ return data;
+ }
+ return (const struct ti_hecc_platform_data *)
+ dev_get_platdata(&pdev->dev);
+}
+
static int ti_hecc_probe(struct platform_device *pdev)
{
struct net_device *ndev = (struct net_device *)0;
struct ti_hecc_priv *priv;
- struct ti_hecc_platform_data *pdata;
+ const struct ti_hecc_platform_data *pdata;
struct resource *mem, *irq;
void __iomem *addr;
int err = -ENODEV;
- pdata = dev_get_platdata(&pdev->dev);
+ pdata = ti_hecc_can_get_driver_data(pdev);
if (!pdata) {
dev_err(&pdev->dev, "No platform data\n");
goto probe_exit;
@@ -1040,6 +1080,7 @@ static int ti_hecc_resume(struct platform_device *pdev)
static struct platform_driver ti_hecc_driver = {
.driver = {
.name = DRV_NAME,
+ .of_match_table = of_match_ptr(ti_hecc_can_dt_ids),
},
.probe = ti_hecc_probe,
.remove = ti_hecc_remove,
--
2.1.0
next reply other threads:[~2015-10-19 6:39 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-19 6:39 Heiko Schocher [this message]
2015-10-19 6:58 ` [PATCH] net, can, ti_hecc: add DT support for the ti,hecc controller Marc Kleine-Budde
2015-10-19 7:27 ` Heiko Schocher
2015-10-19 7:31 ` Marc Kleine-Budde
2015-10-20 14:57 ` Anton.Glukhov
2015-10-20 15:05 ` Marc Kleine-Budde
2015-10-20 15:09 ` Anton.Glukhov
2015-10-20 15:18 ` Marc Kleine-Budde
2015-10-20 15:20 ` Marc Kleine-Budde
[not found] ` <56265BC4.8080403-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2015-10-20 15:38 ` Anton.Glukhov
2015-10-22 1:30 ` Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1445236757-29019-1-git-send-email-hs@denx.de \
--to=hs@denx.de \
--cc=anantgole@ti.com \
--cc=bcousson@baylibre.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-can@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=mkl@pengutronix.de \
--cc=netdev@vger.kernel.org \
--cc=tony@atomide.com \
--cc=wg@grandegger.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).