From: Jaedon Shin <jaedon.shin-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: Wolfram Sang <wsa-z923LK4zBo2bacvFa/9K2g@public.gmane.org>,
Kamal Dasu <kdasu.kdev-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
Ralf Baechle <ralf-6z/3iImG2C8G8FEW9MqTrA@public.gmane.org>
Cc: Florian Fainelli
<f.fainelli-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-mips-6z/3iImG2C8G8FEW9MqTrA@public.gmane.org,
Jaedon Shin <jaedon.shin-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Subject: [PATCH 6/9] MIPS: BMIPS: brcmstb: add I2C node for bcm7346
Date: Wed, 21 Oct 2015 11:36:58 +0900 [thread overview]
Message-ID: <1445395021-4204-7-git-send-email-jaedon.shin@gmail.com> (raw)
In-Reply-To: <1445395021-4204-1-git-send-email-jaedon.shin-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Add I2C device nodes to BMIPS based BCM7346 platform.
Signed-off-by: Jaedon Shin <jaedon.shin-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
arch/mips/boot/dts/brcm/bcm7346.dtsi | 72 ++++++++++++++++++++++++++++++-
arch/mips/boot/dts/brcm/bcm97346dbsmb.dts | 20 +++++++++
2 files changed, 90 insertions(+), 2 deletions(-)
diff --git a/arch/mips/boot/dts/brcm/bcm7346.dtsi b/arch/mips/boot/dts/brcm/bcm7346.dtsi
index d817bb46b934..0a1927099075 100644
--- a/arch/mips/boot/dts/brcm/bcm7346.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm7346.dtsi
@@ -87,14 +87,32 @@
compatible = "brcm,bcm7120-l2-intc";
reg = <0x406780 0x8>;
- brcm,int-map-mask = <0x44>;
+ brcm,int-map-mask = <0x44>, <0xf000000>;
brcm,int-fwd-mask = <0x70000>;
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&periph_intc>;
- interrupts = <59>;
+ interrupts = <59>, <57>;
+ interrupt-names = "upg_main", "upg_bsc";
+ };
+
+ upg_aon_irq0_intc: upg_aon_irq0_intc@408b80 {
+ compatible = "brcm,bcm7120-l2-intc";
+ reg = <0x408b80 0x8>;
+
+ brcm,int-map-mask = <0x40>, <0x8000000>, <0x100000>;
+ brcm,int-fwd-mask = <0>;
+ brcm,irq-can-wake;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&periph_intc>;
+ interrupts = <60>, <58>, <62>;
+ interrupt-names = "upg_main_aon", "upg_bsc_aon",
+ "upg_spi";
};
sun_top_ctrl: syscon@404000 {
@@ -144,6 +162,56 @@
status = "disabled";
};
+ bsca: i2c@406200 {
+ clock-frequency = <390000>;
+ compatible = "brcm,brcmstb-i2c";
+ interrupt-parent = <&upg_irq0_intc>;
+ reg = <0x406200 0x58>;
+ interrupts = <24>;
+ interrupt-names = "upg_bsca";
+ status = "disabled";
+ };
+
+ bscb: i2c@406280 {
+ clock-frequency = <390000>;
+ compatible = "brcm,brcmstb-i2c";
+ interrupt-parent = <&upg_irq0_intc>;
+ reg = <0x406280 0x58>;
+ interrupts = <25>;
+ interrupt-names = "upg_bscb";
+ status = "disabled";
+ };
+
+ bscc: i2c@406300 {
+ clock-frequency = <390000>;
+ compatible = "brcm,brcmstb-i2c";
+ interrupt-parent = <&upg_irq0_intc>;
+ reg = <0x406300 0x58>;
+ interrupts = <26>;
+ interrupt-names = "upg_bscc";
+ status = "disabled";
+ };
+
+ bscd: i2c@406380 {
+ clock-frequency = <390000>;
+ compatible = "brcm,brcmstb-i2c";
+ interrupt-parent = <&upg_irq0_intc>;
+ reg = <0x406380 0x58>;
+ interrupts = <27>;
+ interrupt-names = "upg_bscd";
+ status = "disabled";
+ };
+
+ bsce: i2c@408980 {
+ clock-frequency = <390000>;
+ compatible = "brcm,brcmstb-i2c";
+ interrupt-parent = <&upg_aon_irq0_intc>;
+ reg = <0x408980 0x58>;
+ interrupts = <27>;
+ interrupt-names = "upg_bsce";
+ status = "disabled";
+ };
+
enet0: ethernet@430000 {
phy-mode = "internal";
phy-handle = <&phy1>;
diff --git a/arch/mips/boot/dts/brcm/bcm97346dbsmb.dts b/arch/mips/boot/dts/brcm/bcm97346dbsmb.dts
index 3fe0445b9d37..a5b6365afc5f 100644
--- a/arch/mips/boot/dts/brcm/bcm97346dbsmb.dts
+++ b/arch/mips/boot/dts/brcm/bcm97346dbsmb.dts
@@ -29,6 +29,26 @@
status = "okay";
};
+&bsca {
+ status = "okay";
+};
+
+&bscb {
+ status = "okay";
+};
+
+&bscc {
+ status = "okay";
+};
+
+&bscd {
+ status = "okay";
+};
+
+&bsce {
+ status = "okay";
+};
+
&enet0 {
status = "okay";
};
--
2.6.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2015-10-21 2:36 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-21 2:36 [PATCH 0/9] i2c: brcmstb: add support for BMIPS_GENERIC Jaedon Shin
2015-10-21 2:36 ` [PATCH 1/9] i2c: brcmstb: make the driver buildable on BMIPS_GENERIC Jaedon Shin
2015-10-22 1:56 ` Florian Fainelli
2015-10-21 2:36 ` [PATCH 3/9] i2c: brcmstb: add missing parenthesis Jaedon Shin
2015-10-22 1:56 ` Florian Fainelli
2015-11-30 15:36 ` Wolfram Sang
2015-10-21 2:36 ` [PATCH 4/9] i2c: brcmstb: enable ACK condition Jaedon Shin
2015-11-30 15:37 ` Wolfram Sang
[not found] ` <1445395021-4204-1-git-send-email-jaedon.shin-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2015-10-21 2:36 ` [PATCH 2/9] i2c: brcmstb: fix typo in i2c-brcmstb Jaedon Shin
2015-10-22 1:56 ` Florian Fainelli
2015-10-21 2:36 ` [PATCH 5/9] i2c: brcmstb: fix start and stop conditions Jaedon Shin
2015-11-30 15:41 ` Wolfram Sang
2015-10-21 2:36 ` Jaedon Shin [this message]
[not found] ` <1445395021-4204-7-git-send-email-jaedon.shin-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2015-10-22 1:57 ` [PATCH 6/9] MIPS: BMIPS: brcmstb: add I2C node for bcm7346 Florian Fainelli
2015-10-21 2:36 ` [PATCH 7/9] MIPS: BMIPS: brcmstb: add I2C node for bcm7358 Jaedon Shin
2015-10-22 1:57 ` Florian Fainelli
2015-10-21 2:37 ` [PATCH 8/9] MIPS: BMIPS: brcmstb: add I2C node for bcm7360 Jaedon Shin
2015-10-22 1:57 ` Florian Fainelli
2015-10-21 2:37 ` [PATCH 9/9] MIPS: BMIPS: brcmstb: add I2C node for bcm7362 Jaedon Shin
2015-10-22 1:57 ` Florian Fainelli
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1445395021-4204-7-git-send-email-jaedon.shin@gmail.com \
--to=jaedon.shin-re5jqeeqqe8avxtiumwx3w@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=f.fainelli-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=kdasu.kdev-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-mips-6z/3iImG2C8G8FEW9MqTrA@public.gmane.org \
--cc=ralf-6z/3iImG2C8G8FEW9MqTrA@public.gmane.org \
--cc=wsa-z923LK4zBo2bacvFa/9K2g@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).