From: Bjorn Andersson <bjorn.andersson-/MT0OVThwyLZJqsBc5GL+g@public.gmane.org>
To: Andy Gross <agross-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: [PATCH 3/7] ARM: dts: qcom: msm8974-honami: Introduce gpio-keys
Date: Tue, 20 Oct 2015 21:57:46 -0700 [thread overview]
Message-ID: <1445403470-17434-3-git-send-email-bjorn.andersson@sonymobile.com> (raw)
In-Reply-To: <1445403470-17434-1-git-send-email-bjorn.andersson-/MT0OVThwyLZJqsBc5GL+g@public.gmane.org>
Introduce a gpio-keys node defining the physical keys of the Honami and
the associated pinctrl state.
Signed-off-by: Bjorn Andersson <bjorn.andersson-/MT0OVThwyLZJqsBc5GL+g@public.gmane.org>
---
.../boot/dts/qcom-msm8974-sony-xperia-honami.dts | 45 ++++++++++++++++++++++
1 file changed, 45 insertions(+)
diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts
index 5768c97bb124..8c0753a32b20 100644
--- a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts
+++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-honami.dts
@@ -2,6 +2,7 @@
#include "qcom-pm8841.dtsi"
#include "qcom-pm8941.dtsi"
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
/ {
@@ -16,6 +17,42 @@
stdout-path = "serial0:115200n8";
};
+ gpio-keys {
+ compatible = "gpio-keys";
+ input-name = "gpio-keys";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio_keys_pin_a>;
+
+ volume-down {
+ label = "volume_down";
+ gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
+ linux,input-type = <1>;
+ linux,code = <KEY_VOLUMEDOWN>;
+ };
+
+ camera-snapshot {
+ label = "camera_snapshot";
+ gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>;
+ linux,input-type = <1>;
+ linux,code = <KEY_CAMERA>;
+ };
+
+ camera-focus {
+ label = "camera_focus";
+ gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>;
+ linux,input-type = <1>;
+ linux,code = <KEY_CAMERA_FOCUS>;
+ };
+
+ volume-up {
+ label = "volume_up";
+ gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>;
+ linux,input-type = <1>;
+ linux,code = <KEY_VOLUMEUP>;
+ };
+ };
+
memory@0 {
reg = <0 0x40000000>, <0x40000000 0x40000000>;
device_type = "memory";
@@ -275,6 +312,14 @@
pins = "gpio21";
function = "normal";
};
+
+ gpio_keys_pin_a: gpio-keys-active {
+ pins = "gpio2", "gpio3", "gpio4", "gpio5";
+ function = "normal";
+
+ bias-pull-up;
+ power-source = <PM8941_GPIO_S3>;
+ };
};
coincell@2800 {
--
2.4.2
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2015-10-21 4:57 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-21 4:57 [PATCH 1/7] ARM: dts: qcom: msm8974-honami: Define pinctrl state for blsp_uart2 Bjorn Andersson
2015-10-21 4:57 ` [PATCH 2/7] ARM: dts: qcom: msm8974-honami: Add regulator nodes for Honami Bjorn Andersson
[not found] ` <1445403470-17434-1-git-send-email-bjorn.andersson-/MT0OVThwyLZJqsBc5GL+g@public.gmane.org>
2015-10-21 4:57 ` Bjorn Andersson [this message]
2015-11-30 19:23 ` [PATCH 1/7] ARM: dts: qcom: msm8974-honami: Define pinctrl state for blsp_uart2 Kevin Hilman
[not found] ` <CAMAWPa9fHWY3diCfZG2s0ZaNqza+SnK+4QZzkAwW8xb9zjOqHg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-11-30 20:19 ` Bjorn Andersson
[not found] ` <CAJAp7OjWj2ZGwypXdWbkDVadJePT7PrPSDJ3-89q+oxGdhDHWw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-11-30 21:01 ` Andy Gross
2015-10-21 4:57 ` [PATCH 4/7] ARM: dts: qcom: msm8974-honami: Add sdhci1 node Bjorn Andersson
2015-10-21 4:57 ` [PATCH 5/7] ARM: dts: qcom: msm8974-honami: Add uSD slot nodes Bjorn Andersson
2015-10-21 4:57 ` [PATCH 6/7] ARM: dts: qcom: msm8974-honami: Specify charging parameters Bjorn Andersson
2015-10-21 4:57 ` [PATCH 7/7] ARM: defconfig: Update qcom_defconfig Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1445403470-17434-3-git-send-email-bjorn.andersson@sonymobile.com \
--to=bjorn.andersson-/mt0ovthwylzjqsbc5gl+g@public.gmane.org \
--cc=agross-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).