From: Bjorn Andersson <bjorn.andersson@sonymobile.com>
To: Andy Gross <agross@codeaurora.org>
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [PATCH 7/7] ARM: defconfig: Update qcom_defconfig
Date: Tue, 20 Oct 2015 21:57:50 -0700 [thread overview]
Message-ID: <1445403470-17434-7-git-send-email-bjorn.andersson@sonymobile.com> (raw)
In-Reply-To: <1445403470-17434-1-git-send-email-bjorn.andersson@sonymobile.com>
This enables smem, smd, rpm, regulators, pmic pinctrl and hwspinlock as
these platform features are now merged. It enables gpio-keys as this is
used by most boards and enables fhandle and cgroups, so we can boot
systemd.
Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
---
MSM_IOMMU is marked as BROKEN as of next-20151020, the other options
that is disabled are done so because they are now default on.
arch/arm/configs/qcom_defconfig | 16 ++++++++++++----
1 file changed, 12 insertions(+), 4 deletions(-)
diff --git a/arch/arm/configs/qcom_defconfig b/arch/arm/configs/qcom_defconfig
index ff7985ba226e..0efe0741b5be 100644
--- a/arch/arm/configs/qcom_defconfig
+++ b/arch/arm/configs/qcom_defconfig
@@ -1,8 +1,10 @@
CONFIG_SYSVIPC=y
+CONFIG_FHANDLE=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
+CONFIG_CGROUPS=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS_ALL=y
@@ -25,7 +27,6 @@ CONFIG_SMP=y
CONFIG_PREEMPT=y
CONFIG_AEABI=y
CONFIG_HIGHMEM=y
-CONFIG_HIGHPTE=y
CONFIG_CLEANCACHE=y
CONFIG_ARM_APPENDED_DTB=y
CONFIG_ARM_ATAG_DTB_COMPAT=y
@@ -78,6 +79,7 @@ CONFIG_USB_USBNET=y
# CONFIG_USB_NET_ZAURUS is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_KEYBOARD_ATKBD is not set
+CONFIG_KEYBOARD_GPIO=y
# CONFIG_MOUSE_PS2 is not set
CONFIG_INPUT_JOYSTICK=y
CONFIG_INPUT_TOUCHSCREEN=y
@@ -99,16 +101,21 @@ CONFIG_PINCTRL_APQ8084=y
CONFIG_PINCTRL_IPQ8064=y
CONFIG_PINCTRL_MSM8960=y
CONFIG_PINCTRL_MSM8X74=y
+CONFIG_PINCTRL_QCOM_SPMI_PMIC=y
+CONFIG_PINCTRL_QCOM_SSBI_PMIC=y
CONFIG_GPIOLIB=y
CONFIG_DEBUG_GPIO=y
CONFIG_GPIO_SYSFS=y
+CONFIG_CHARGER_QCOM_SMBB=y
CONFIG_POWER_RESET=y
CONFIG_POWER_RESET_MSM=y
CONFIG_THERMAL=y
CONFIG_MFD_QCOM_RPM=y
+CONFIG_MFD_SPMI_PMIC=y
CONFIG_REGULATOR=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_REGULATOR_QCOM_RPM=y
+CONFIG_REGULATOR_QCOM_SMD_RPM=y
CONFIG_MEDIA_SUPPORT=y
CONFIG_FB=y
CONFIG_SOUND=y
@@ -145,16 +152,17 @@ CONFIG_MSM_GCC_8660=y
CONFIG_MSM_LCC_8960=y
CONFIG_MSM_MMCC_8960=y
CONFIG_MSM_MMCC_8974=y
-CONFIG_MSM_IOMMU=y
+CONFIG_HWSPINLOCK_QCOM=y
CONFIG_QCOM_GSBI=y
CONFIG_QCOM_PM=y
+CONFIG_QCOM_SMEM=y
+CONFIG_QCOM_SMD=y
+CONFIG_QCOM_SMD_RPM=y
CONFIG_PHY_QCOM_APQ8064_SATA=y
CONFIG_PHY_QCOM_IPQ806X_SATA=y
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT4_FS=y
CONFIG_FUSE_FS=y
CONFIG_VFAT_FS=y
CONFIG_TMPFS=y
--
2.4.2
prev parent reply other threads:[~2015-10-21 4:57 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-21 4:57 [PATCH 1/7] ARM: dts: qcom: msm8974-honami: Define pinctrl state for blsp_uart2 Bjorn Andersson
2015-10-21 4:57 ` [PATCH 2/7] ARM: dts: qcom: msm8974-honami: Add regulator nodes for Honami Bjorn Andersson
[not found] ` <1445403470-17434-1-git-send-email-bjorn.andersson-/MT0OVThwyLZJqsBc5GL+g@public.gmane.org>
2015-10-21 4:57 ` [PATCH 3/7] ARM: dts: qcom: msm8974-honami: Introduce gpio-keys Bjorn Andersson
2015-11-30 19:23 ` [PATCH 1/7] ARM: dts: qcom: msm8974-honami: Define pinctrl state for blsp_uart2 Kevin Hilman
[not found] ` <CAMAWPa9fHWY3diCfZG2s0ZaNqza+SnK+4QZzkAwW8xb9zjOqHg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-11-30 20:19 ` Bjorn Andersson
[not found] ` <CAJAp7OjWj2ZGwypXdWbkDVadJePT7PrPSDJ3-89q+oxGdhDHWw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-11-30 21:01 ` Andy Gross
2015-10-21 4:57 ` [PATCH 4/7] ARM: dts: qcom: msm8974-honami: Add sdhci1 node Bjorn Andersson
2015-10-21 4:57 ` [PATCH 5/7] ARM: dts: qcom: msm8974-honami: Add uSD slot nodes Bjorn Andersson
2015-10-21 4:57 ` [PATCH 6/7] ARM: dts: qcom: msm8974-honami: Specify charging parameters Bjorn Andersson
2015-10-21 4:57 ` Bjorn Andersson [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1445403470-17434-7-git-send-email-bjorn.andersson@sonymobile.com \
--to=bjorn.andersson@sonymobile.com \
--cc=agross@codeaurora.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).