From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jon Mason Subject: [PATCH 1/3] ARM: dts: NSP: Add PCI support Date: Wed, 21 Oct 2015 19:08:51 -0400 Message-ID: <1445468933-25933-2-git-send-email-jonmason@broadcom.com> References: <1445468933-25933-1-git-send-email-jonmason@broadcom.com> Mime-Version: 1.0 Content-Type: text/plain Return-path: In-Reply-To: <1445468933-25933-1-git-send-email-jonmason-dY08KVG/lbpWk0Htik3J/w@public.gmane.org> Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Florian Fainelli , Rob Herring , Pawel Moll , Mark Rutland , Ian Campbell , Kumar Gala , Russell King Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, bcm-kernel-feedback-list-dY08KVG/lbpWk0Htik3J/w@public.gmane.org List-Id: devicetree@vger.kernel.org Add PCI support to the Northstar Plus SoC. This uses the existing pcie-iproc driver. So, all that is needed is device tree entries in the DTS. Signed-off-by: Jon Mason --- arch/arm/boot/dts/bcm-nsp.dtsi | 74 +++++++++++++++++++++++++++++++++++++++- arch/arm/boot/dts/bcm958625k.dts | 12 +++++++ 2 files changed, 85 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi index 58aca27..85fb1c8 100644 --- a/arch/arm/boot/dts/bcm-nsp.dtsi +++ b/arch/arm/boot/dts/bcm-nsp.dtsi @@ -96,7 +96,7 @@ axi { compatible = "simple-bus"; - ranges = <0x00000000 0x18000000 0x00001000>; + ranges = <0x00000000 0x18000000 0x00015000>; #address-cells = <1>; #size-cells = <1>; @@ -115,5 +115,77 @@ clock-frequency = <62499840>; status = "disabled"; }; + + pcie0: pcie@18012000 { + compatible = "brcm,iproc-pcie"; + reg = <0x12000 0x1000>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 131 IRQ_TYPE_NONE>; + + linux,pci-domain = <0>; + + bus-range = <0x00 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + + /* Note: The HW does not support I/O resources. So, + * only the memory resource range is being specified. + */ + ranges = <0x82000000 0 0x08000000 0x08000000 0 0x8000000>; + + status = "disabled"; + }; + + pcie1: pcie@18013000 { + compatible = "brcm,iproc-pcie"; + reg = <0x13000 0x1000>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 137 IRQ_TYPE_NONE>; + + linux,pci-domain = <1>; + + bus-range = <0x00 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + + /* Note: The HW does not support I/O resources. So, + * only the memory resource range is being specified. + */ + ranges = <0x82000000 0 0x40000000 0x40000000 0 0x8000000>; + + status = "disabled"; + }; + + pcie2: pcie@18014000 { + compatible = "brcm,iproc-pcie"; + reg = <0x14000 0x1000>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 143 IRQ_TYPE_NONE>; + + linux,pci-domain = <2>; + + bus-range = <0x00 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + + /* Note: The HW does not support I/O resources. So, + * only the memory resource range is being specified. + */ + ranges = <0x82000000 0 0x48000000 0x48000000 0 0x8000000>; + + status = "disabled"; + }; }; }; diff --git a/arch/arm/boot/dts/bcm958625k.dts b/arch/arm/boot/dts/bcm958625k.dts index 16303db..4859268 100644 --- a/arch/arm/boot/dts/bcm958625k.dts +++ b/arch/arm/boot/dts/bcm958625k.dts @@ -55,3 +55,15 @@ &uart1 { status = "okay"; }; + +&pcie0 { + status = "okay"; +}; + +&pcie1 { + status = "okay"; +}; + +&pcie2 { + status = "okay"; +}; -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html