[PATCH 0/4] Sony Xperia Z dts

[PATCH 0/4] Sony Xperia Z dts

[Bjorn Andersson]

This series starts by adding hwspinlock, smem, gsbi5 and cleans up the
8064 regulator definitions.

Based on this it adds the necessary nodes for booting the Sony Xperia Z
(APQ8064 based) to userspace, with UART, eMMC, uSD, USB gadget and hw
buttons.

Bjorn Andersson (4):
  ARM: dts: qcom: apq8064: Add hwmutex and SMEM nodes
  ARM: dts: qcom: apq8064: Declare all pm8921 regulators
  ARM: dts: qcom: apq8064: Introduce gsbi5 and gsbi5 serial node
  ARM: dts: qcom: apq8064: Introduce Sony Xperia Z dts

 arch/arm/boot/dts/Makefile                         |   1 +
 arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts        |  16 +-
 arch/arm/boot/dts/qcom-apq8064-ifc6410.dts         |  20 +-
 .../arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts | 436 +++++++++++++++++++++
 arch/arm/boot/dts/qcom-apq8064.dtsi                |  97 +++++
 5 files changed, 552 insertions(+), 18 deletions(-)
 create mode 100644 arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts

-- 
2.4.2

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 1/4] ARM: dts: qcom: apq8064: Add hwmutex and SMEM nodes

[Bjorn Andersson]

Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
---
 arch/arm/boot/dts/qcom-apq8064.dtsi | 29 +++++++++++++++++++++++++++++
 1 file changed, 29 insertions(+)

diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
index a4c1762b53ea..1b64723bd8a0 100644
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -11,6 +11,17 @@
 	compatible = "qcom,apq8064";
 	interrupt-parent = <&intc>;
 
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		smem_region: smem@80000000 {
+			reg = <0x80000000 0x200000>;
+			no-map;
+		};
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -80,6 +91,19 @@
 		interrupts = <1 10 0x304>;
 	};
 
+	sfpb_mutex: hwmutex {
+		compatible = "qcom,sfpb-mutex";
+		syscon = <&sfpb_wrapper_mutex 0x604 0x4>;
+		#hwlock-cells = <1>;
+	};
+
+	smem {
+		compatible = "qcom,smem";
+		memory-region = <&smem_region>;
+
+		hwlocks = <&sfpb_mutex 3>;
+	};
+
 	soc: soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -156,6 +180,11 @@
 			};
 		};
 
+		sfpb_wrapper_mutex: syscon@1200000 {
+			compatible = "syscon";
+			reg = <0x01200000 0x8000>;
+		};
+
 		intc: interrupt-controller@2000000 {
 			compatible = "qcom,msm-qgic2";
 			interrupt-controller;
-- 
2.4.2

[PATCH 2/4] ARM: dts: qcom: apq8064: Declare all pm8921 regulators

[Bjorn Andersson]

Consolidate all labeling of regulators into the core 8064 dtsi file to
make them available from all other dts files.

Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
---
 arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts | 16 +++++-----
 arch/arm/boot/dts/qcom-apq8064-ifc6410.dts  | 20 ++++++-------
 arch/arm/boot/dts/qcom-apq8064.dtsi         | 46 +++++++++++++++++++++++++++++
 3 files changed, 64 insertions(+), 18 deletions(-)

diff --git a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
index 03784f1366e5..21095dad7741 100644
--- a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
@@ -54,7 +54,7 @@
 
 
 				/* Buck SMPS */
-				pm8921_s1: s1 {
+				s1 {
 					regulator-always-on;
 					regulator-min-microvolt = <1225000>;
 					regulator-max-microvolt = <1225000>;
@@ -62,43 +62,43 @@
 					bias-pull-down;
 				};
 
-				pm8921_s3: s3 {
+				s3 {
 					regulator-min-microvolt = <1000000>;
 					regulator-max-microvolt = <1400000>;
 					qcom,switch-mode-frequency = <4800000>;
 				};
 
-				pm8921_s4: s4 {
+				s4 {
 					regulator-min-microvolt	= <1800000>;
 					regulator-max-microvolt	= <1800000>;
 					qcom,switch-mode-frequency = <3200000>;
 				};
 
-				pm8921_s7: s7 {
+				s7 {
 					regulator-min-microvolt = <1300000>;
 					regulator-max-microvolt = <1300000>;
 					qcom,switch-mode-frequency = <3200000>;
 				};
 
-				pm8921_l3: l3 {
+				l3 {
 					regulator-min-microvolt = <3050000>;
 					regulator-max-microvolt = <3300000>;
 					bias-pull-down;
 				};
 
-				pm8921_l4: l4 {
+				l4 {
 					regulator-min-microvolt = <1000000>;
 					regulator-max-microvolt = <1800000>;
 					bias-pull-down;
 				};
 
-				pm8921_l5: l5 {
+				l5 {
 					regulator-min-microvolt = <2750000>;
 					regulator-max-microvolt = <3000000>;
 					bias-pull-down;
 				};
 
-				pm8921_l23: l23 {
+				l23 {
 					regulator-min-microvolt = <1700000>;
 					regulator-max-microvolt = <1900000>;
 					bias-pull-down;
diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
index 11ac608b6d50..f40e93f09673 100644
--- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
@@ -64,7 +64,7 @@
 
 
 				/* Buck SMPS */
-				pm8921_s1: s1 {
+				s1 {
 					regulator-always-on;
 					regulator-min-microvolt = <1225000>;
 					regulator-max-microvolt = <1225000>;
@@ -72,55 +72,55 @@
 					bias-pull-down;
 				};
 
-				pm8921_s3: s3 {
+				s3 {
 					regulator-min-microvolt = <1000000>;
 					regulator-max-microvolt = <1400000>;
 					qcom,switch-mode-frequency = <4800000>;
 				};
 
-				pm8921_s4: s4 {
+				s4 {
 					regulator-min-microvolt	= <1800000>;
 					regulator-max-microvolt	= <1800000>;
 					qcom,switch-mode-frequency = <3200000>;
 				};
 
-				pm8921_s7: s7 {
+				s7 {
 					regulator-min-microvolt = <1300000>;
 					regulator-max-microvolt = <1300000>;
 					qcom,switch-mode-frequency = <3200000>;
 				};
 
-				pm8921_l3: l3 {
+				l3 {
 					regulator-min-microvolt = <3050000>;
 					regulator-max-microvolt = <3300000>;
 					bias-pull-down;
 				};
 
-				pm8921_l4: l4 {
+				l4 {
 					regulator-min-microvolt = <1000000>;
 					regulator-max-microvolt = <1800000>;
 					bias-pull-down;
 				};
 
-				pm8921_l5: l5 {
+				l5 {
 					regulator-min-microvolt = <2750000>;
 					regulator-max-microvolt = <3000000>;
 					bias-pull-down;
 				};
 
-				pm8921_l6: l6 {
+				l6 {
 					regulator-min-microvolt = <2950000>;
 					regulator-max-microvolt = <2950000>;
 					bias-pull-down;
 				};
 
-				pm8921_l23: l23 {
+				l23 {
 					regulator-min-microvolt = <1700000>;
 					regulator-max-microvolt = <1900000>;
 					bias-pull-down;
 				};
 
-				pm8921_lvs1: lvs1 {
+				lvs1 {
 					bias-pull-down;
 				};
 			};
diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
index 1b64723bd8a0..1bc6c4039dea 100644
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -473,9 +473,55 @@
 			regulators {
 				compatible = "qcom,rpm-pm8921-regulators";
 
+				pm8921_s1: s1 {};
+				pm8921_s2: s2 {};
+				pm8921_s3: s3 {};
+				pm8921_s4: s4 {};
+				pm8921_s7: s7 {};
+				pm8921_s8: s8 {};
+
+				pm8921_l1: l1 {};
+				pm8921_l2: l2 {};
+				pm8921_l3: l3 {};
+				pm8921_l4: l4 {};
+				pm8921_l5: l5 {};
+				pm8921_l6: l6 {};
+				pm8921_l7: l7 {};
+				pm8921_l8: l8 {};
+				pm8921_l9: l9 {};
+				pm8921_l10: l10 {};
+				pm8921_l11: l11 {};
+				pm8921_l12: l12 {};
+				pm8921_l14: l14 {};
+				pm8921_l15: l15 {};
+				pm8921_l16: l16 {};
+				pm8921_l17: l17 {};
+				pm8921_l18: l18 {};
+				pm8921_l21: l21 {};
+				pm8921_l22: l22 {};
+				pm8921_l23: l23 {};
+				pm8921_l24: l24 {};
+				pm8921_l25: l25 {};
+				pm8921_l26: l26 {};
+				pm8921_l27: l27 {};
+				pm8921_l28: l28 {};
+				pm8921_l29: l29 {};
+
+				pm8921_lvs1: lvs1 {};
+				pm8921_lvs2: lvs2 {};
+				pm8921_lvs3: lvs3 {};
+				pm8921_lvs4: lvs4 {};
+				pm8921_lvs5: lvs5 {};
+				pm8921_lvs6: lvs6 {};
+				pm8921_lvs7: lvs7 {};
+
+				pm8921_usb_switch: usb-switch {};
+
 				pm8921_hdmi_switch: hdmi-switch {
 					bias-pull-down;
 				};
+
+				pm8921_ncp: ncp {};
 			};
 		};
 
-- 
2.4.2

[PATCH 3/4] ARM: dts: qcom: apq8064: Introduce gsbi5 and gsbi5 serial node

[Bjorn Andersson]

Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
---
 arch/arm/boot/dts/qcom-apq8064.dtsi | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
index 1bc6c4039dea..fa3053c14532 100644
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -320,6 +320,28 @@
 			};
 		};
 
+		gsbi5: gsbi@1a200000 {
+			status = "disabled";
+			compatible = "qcom,gsbi-v1.0.0";
+			cell-index = <5>;
+			reg = <0x1a200000 0x03>;
+			clocks = <&gcc GSBI5_H_CLK>;
+			clock-names = "iface";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			gsbi5_serial: serial@1a240000 {
+				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+				reg = <0x1a240000 0x100>,
+				      <0x1a200000 0x03>;
+				interrupts = <0 154 0x0>;
+				clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+			};
+		};
+
 		gsbi6: gsbi@16500000 {
 			status = "disabled";
 			compatible = "qcom,gsbi-v1.0.0";
-- 
2.4.2

[PATCH 4/4] ARM: dts: qcom: apq8064: Introduce Sony Xperia Z dts

[Bjorn Andersson]

This introduces initial support for the Sony Xperia Z smartphone, including
support for UART, MMC, USB gadget and physical buttons.

Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
---
 arch/arm/boot/dts/Makefile                         |   1 +
 .../arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts | 436 +++++++++++++++++++++
 2 files changed, 437 insertions(+)
 create mode 100644 arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 7d3e495c0897..42a9370d4ad1 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -500,6 +500,7 @@ dtb-$(CONFIG_ARCH_PRIMA2) += \
 dtb-$(CONFIG_ARCH_QCOM) += \
 	qcom-apq8064-cm-qs600.dtb \
 	qcom-apq8064-ifc6410.dtb \
+	qcom-apq8064-sony-xperia-yuga.dtb \
 	qcom-apq8074-dragonboard.dtb \
 	qcom-apq8084-ifc6540.dtb \
 	qcom-apq8084-mtp.dtb \
diff --git a/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts b/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts
new file mode 100644
index 000000000000..06b3c76c3e41
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts
@@ -0,0 +1,436 @@
+#include "qcom-apq8064-v2.0.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/mfd/qcom-rpm.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+
+/ {
+	model = "Sony Xperia Z";
+	compatible = "sony,xperia-yuga", "qcom,apq8064";
+
+	aliases {
+		serial0 = &gsbi5_serial;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		input-name = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys_pin_a>;
+
+		camera-focus {
+			label = "camera_focus";
+			gpios = <&pm8921_gpio 3 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_CAMERA_FOCUS>;
+		};
+
+		camera-snapshot {
+			label = "camera_snapshot";
+			gpios = <&pm8921_gpio 4 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_CAMERA>;
+		};
+
+		volume-down {
+			label = "volume_down";
+			gpios = <&pm8921_gpio 29 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+
+		volume-up {
+			label = "volume_up";
+			gpios = <&pm8921_gpio 35 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+
+	soc {
+		pinctrl@800000 {
+			gsbi5_uart_pin_a: gsbi5-uart-pin-active {
+				rx {
+					pins = "gpio52";
+					function = "gsbi5";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				tx {
+					pins = "gpio51";
+					function = "gsbi5";
+					drive-strength = <4>;
+					bias-disable;
+				};
+			};
+
+			sdcc1_pin_a: sdcc1-pin-active {
+				clk {
+					pins = "sdc1_clk";
+					drive-strengh = <16>;
+					bias-disable;
+				};
+
+				cmd {
+					pins = "sdc1_cmd";
+					drive-strengh = <10>;
+					bias-pull-up;
+				};
+
+				data {
+					pins = "sdc1_data";
+					drive-strengh = <10>;
+					bias-pull-up;
+				};
+			};
+
+			sdcc3_pin_a: sdcc3-pin-active {
+				clk {
+					pins = "sdc3_clk";
+					drive-strengh = <8>;
+					bias-disable;
+				};
+
+				cmd {
+					pins = "sdc3_cmd";
+					drive-strengh = <8>;
+					bias-pull-up;
+				};
+
+				data {
+					pins = "sdc3_data";
+					drive-strengh = <8>;
+					bias-pull-up;
+				};
+			};
+
+			sdcc3_cd_pin_a: sdcc3-cd-pin-active {
+				pins = "gpio26";
+				function = "gpio";
+
+				drive-strength = <2>;
+				bias-disable;
+			};
+		};
+
+
+		rpm@108000 {
+			regulators {
+				vin_l1_l2_l12_l18-supply = <&pm8921_s4>;
+				vin_lvs_1_3_6-supply = <&pm8921_s4>;
+				vin_lvs_4_5_7-supply = <&pm8921_s4>;
+				vin_ncp-supply = <&pm8921_l6>;
+				vin_lvs2-supply = <&pm8921_s4>;
+				vin_l24-supply = <&pm8921_s1>;
+				vin_l25-supply = <&pm8921_s1>;
+				vin_l27-supply = <&pm8921_s7>;
+				vin_l28-supply = <&pm8921_s7>;
+
+				/* Buck SMPS */
+				s1 {
+					regulator-always-on;
+					regulator-min-microvolt = <1225000>;
+					regulator-max-microvolt = <1225000>;
+					qcom,switch-mode-frequency = <3200000>;
+					bias-pull-down;
+				};
+
+				s2 {
+					regulator-min-microvolt = <1300000>;
+					regulator-max-microvolt = <1300000>;
+					qcom,switch-mode-frequency = <1600000>;
+					bias-pull-down;
+				};
+
+				s3 {
+					regulator-min-microvolt = <500000>;
+					regulator-max-microvolt = <1150000>;
+					qcom,switch-mode-frequency = <4800000>;
+					bias-pull-down;
+				};
+
+				s4 {
+					regulator-always-on;
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					qcom,switch-mode-frequency = <1600000>;
+					bias-pull-down;
+					qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>;
+				};
+
+				s7 {
+					regulator-min-microvolt = <1300000>;
+					regulator-max-microvolt = <1300000>;
+					qcom,switch-mode-frequency = <3200000>;
+				};
+
+				s8 {
+					regulator-min-microvolt = <2200000>;
+					regulator-max-microvolt = <2200000>;
+					qcom,switch-mode-frequency = <1600000>;
+				};
+
+				/* PMOS LDO */
+				l1 {
+					regulator-always-on;
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+					bias-pull-down;
+				};
+
+				l2 {
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					bias-pull-down;
+				};
+
+				l3 {
+					regulator-min-microvolt = <3075000>;
+					regulator-max-microvolt = <3075000>;
+					bias-pull-down;
+				};
+
+				l4 {
+					regulator-always-on;
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					bias-pull-down;
+				};
+
+				l5 {
+					regulator-min-microvolt = <2950000>;
+					regulator-max-microvolt = <2950000>;
+					bias-pull-down;
+				};
+
+				l6 {
+					regulator-min-microvolt = <2950000>;
+					regulator-max-microvolt = <2950000>;
+					bias-pull-down;
+				};
+
+				l7 {
+					regulator-min-microvolt = <1850000>;
+					regulator-max-microvolt = <2950000>;
+					bias-pull-down;
+				};
+
+				l8 {
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					bias-pull-down;
+				};
+
+				l9 {
+					regulator-min-microvolt = <3000000>;
+					regulator-max-microvolt = <3000000>;
+					bias-pull-down;
+				};
+
+				l10 {
+					regulator-min-microvolt = <2900000>;
+					regulator-max-microvolt = <2900000>;
+					bias-pull-down;
+				};
+
+				l11 {
+					regulator-min-microvolt = <3000000>;
+					regulator-max-microvolt = <3000000>;
+					bias-pull-down;
+				};
+
+				l12 {
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					bias-pull-down;
+				};
+
+				l14 {
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					bias-pull-down;
+				};
+
+				l15 {
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <2950000>;
+					bias-pull-down;
+				};
+
+				l16 {
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					bias-pull-down;
+				};
+
+				l17 {
+					regulator-min-microvolt = <2000000>;
+					regulator-max-microvolt = <2000000>;
+					bias-pull-down;
+				};
+
+				l18 {
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+					bias-pull-down;
+				};
+
+				l21 {
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+					bias-pull-down;
+				};
+
+				l22 {
+					regulator-min-microvolt = <2600000>;
+					regulator-max-microvolt = <2600000>;
+					bias-pull-down;
+				};
+
+				l23 {
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					bias-pull-down;
+				};
+
+				l24 {
+					regulator-min-microvolt = <750000>;
+					regulator-max-microvolt = <1150000>;
+					bias-pull-down;
+				};
+
+				l25 {
+					regulator-always-on;
+					regulator-min-microvolt = <1250000>;
+					regulator-max-microvolt = <1250000>;
+					bias-pull-down;
+				};
+
+				l27 {
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+				};
+
+				l28 {
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+					bias-pull-down;
+				};
+
+				l29 {
+					regulator-min-microvolt = <2000000>;
+					regulator-max-microvolt = <2000000>;
+					bias-pull-down;
+				};
+
+				/* Low Voltage Switch */
+				lvs1 {
+					bias-pull-down;
+				};
+
+				lvs2 {
+					bias-pull-down;
+				};
+
+				lvs3 {
+					bias-pull-down;
+				};
+
+				lvs4 {
+					bias-pull-down;
+				};
+
+				lvs5 {
+					bias-pull-down;
+				};
+
+				lvs6 {
+					bias-pull-down;
+				};
+
+				lvs7 {
+					bias-pull-down;
+				};
+
+				usb-switch {};
+
+				hdmi-switch {};
+
+				ncp {
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					qcom,switch-mode-frequency = <1600000>;
+				};
+			};
+		};
+
+		qcom,ssbi@500000 {
+			pmic@0 {
+				gpio@150 {
+					gpio_keys_pin_a: gpio-keys-pin-active {
+						pins = "gpio3", "gpio4", "gpio29", "gpio35";
+						function = "normal";
+
+						bias-pull-up;
+						drive-push-pull;
+						input-enable;
+						power-source = <2>;
+						qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+						qcom,pull-up-strength = <0>;
+					};
+				};
+			};
+		};
+
+		phy@12500000 {
+			status		= "okay";
+			vddcx-supply	= <&pm8921_s3>;
+			v3p3-supply	= <&pm8921_l3>;
+			v1p8-supply	= <&pm8921_l4>;
+		};
+
+		gadget@12500000 {
+			status = "okay";
+		};
+
+		gsbi@1a200000 {
+			status = "ok";
+			qcom,mode = <GSBI_PROT_I2C_UART>;
+
+			serial@1a240000 {
+				status = "ok";
+
+				pinctrl-names = "default";
+				pinctrl-0 = <&gsbi5_uart_pin_a>;
+			};
+		};
+
+		amba {
+			sdcc1: sdcc@12400000 {
+				status = "okay";
+
+				vmmc-supply = <&pm8921_l5>;
+				vqmmc-supply = <&pm8921_s4>;
+
+				pinctrl-names = "default";
+				pinctrl-0 = <&sdcc1_pin_a>;
+			};
+
+			sdcc3: sdcc@12180000 {
+				status = "okay";
+
+				vmmc-supply = <&pm8921_l6>;
+				cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
+
+				pinctrl-names = "default";
+				pinctrl-0 = <&sdcc3_pin_a>, <&sdcc3_cd_pin_a>;
+			};
+		};
+	};
+};
-- 
2.4.2