From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jaedon Shin Subject: [PATCH 04/10] phy: phy_brcmstb_sata: make the driver buildable on BMIPS_GENERIC Date: Fri, 23 Oct 2015 10:44:17 +0900 Message-ID: <1445564663-66824-5-git-send-email-jaedon.shin@gmail.com> References: <1445564663-66824-1-git-send-email-jaedon.shin@gmail.com> Return-path: In-Reply-To: <1445564663-66824-1-git-send-email-jaedon.shin@gmail.com> Sender: linux-ide-owner@vger.kernel.org To: Tejun Heo , Kishon Vijay Abraham I , Ralf Baechle , Florian Fainelli , Rob Herring Cc: linux-ide@vger.kernel.org, linux-mips@linux-mips.org, devicetree@vger.kernel.org, Jaedon Shin List-Id: devicetree@vger.kernel.org The BCM7xxx ARM and MIPS platforms share a similar hardware block for AHCI SATA3 PHY. Signed-off-by: Jaedon Shin --- drivers/phy/Kconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig index 47da573d0bab..c83e48661fd7 100644 --- a/drivers/phy/Kconfig +++ b/drivers/phy/Kconfig @@ -364,11 +364,11 @@ config PHY_TUSB1210 config PHY_BRCMSTB_SATA tristate "Broadcom STB SATA PHY driver" - depends on ARCH_BRCMSTB + depends on ARCH_BRCMSTB || BMIPS_GENERIC depends on OF select GENERIC_PHY help - Enable this to support the SATA3 PHY on 28nm Broadcom STB SoCs. + Enable this to support the SATA3 PHY on 28nm or 40nm Broadcom STB SoCs. Likely useful only with CONFIG_SATA_BRCMSTB enabled. endmenu -- 2.6.2