From: Constantine Shulyupin <const@makelinux.com>
To: linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
lm-sensors@lm-sensors.org, Arnd Bergmann <arnd@arndb.de>,
Jean Delvare <jdelvare@suse.com>,
Guenter Roeck <linux@roeck-us.net>,
Rob Herring <robh+dt@kernel.org>, Pawel Moll <pawel.moll@arm.com>,
Mark Rutland <mark.rutland@arm.com>,
Ian Campbell <ijc+devicetree@hellion.org.uk>,
Kumar Gala <galak@codeaurora.org>
Cc: Constantine Shulyupin <const@MakeLinux.com>
Subject: [PATCH v7] Documentation: add Device tree bindings for hwmon/nct7802
Date: Sat, 24 Oct 2015 02:03:33 +0300 [thread overview]
Message-ID: <1445641413-18662-1-git-send-email-const@makelinux.com> (raw)
Introduced subnodes sensor, fan and peci with properties.
Signed-off-by: Constantine Shulyupin <const@MakeLinux.com>
---
Changed in v7:
- sensors type (thermistor, thermistor, voltage) and pwm type
selected with type property instead of compatible property.
Changed in v6:
- Removed previous definition.
- Introduced subnodes sensor, fan and peci with properties.
Changed in v5:
- Fixed typos
Changed in v4:
- Removed registers initialization by names
- Added properties nuvoton,sensor*-type
Changed in v3:
- Fixed vendor prefix
- Added short registers description,
full registers description is available at
https://www.nuvoton.com/hq/products/cloud-computing/hardware-monitors/desktop-server-series/nct7802y/
Changed in v2:
- Removed nct7802,reg-init
- Added registers initialization by names
Introduced in v1:
- nct7802,reg-init
---
.../devicetree/bindings/hwmon/nct7802.txt | 77 ++++++++++++++++++++++
1 file changed, 77 insertions(+)
create mode 100644 Documentation/devicetree/bindings/hwmon/nct7802.txt
diff --git a/Documentation/devicetree/bindings/hwmon/nct7802.txt b/Documentation/devicetree/bindings/hwmon/nct7802.txt
new file mode 100644
index 0000000..1619202
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/nct7802.txt
@@ -0,0 +1,77 @@
+Nuvoton NCT7802Y Hardware Monitoring IC
+
+Required node properties:
+
+ - "compatible": must be "nuvoton,nct7802"
+ - "reg": I2C bus address of the device
+ - #address-cells=<1>;
+ - #size-cells=<0>;
+
+Optional subnodes:
+
+Sensor subnodes properties:
+ - "reg": index in range 0..2
+ - "compatible", allowed values:
+ - "nuvoton,nct7802"
+ - "sensor-type", allowed values:
+ "thermal-diode"
+ "thermistor"
+ "voltage"
+
+Except sensor at address 2 can't be "thermal-diode".
+
+Fan subnode:
+
+Required properties:
+ - "reg" :index of in range 0 .. 2.
+ - "compatible", should be "nuvoton,nct7802-fan"
+Optional boolean properties:
+ - "direct-current" :direct current powered fan instead default PWM
+ - "invert" :inverted polarity
+ - "open-drain" :open-drain output instead push pull
+
+Subnode "peci" properties:
+ - "reg" :index in range 0..1
+ - "compatible", should be "nuvoton,nct7802-peci"
+
+Subnode vcc properties:
+ - "compatible", should be "nuvoton,nct7802-vcc"
+
+Subnode vcore properties:
+ - "compatible", should be "nuvoton,nct7802-vcore"
+
+Not defined sensors, fans and PECI modules will be disabled.
+
+Example nct7802 node:
+
+nct7802 {
+ compatible = "nuvoton,nct7802";
+ reg = <0x2a>;
+ #address-cells=<1>;
+ #size-cells=<0>;
+ sensor@0 {
+ reg = <0>;
+ compatible = "nuvoton,nct7802";
+ sensor-type = "thermistor"
+ };
+ sensor@1 {
+ reg = <1>;
+ compatible = "nuvoton,nct7802";
+ sensor-type = "thermal-diode";
+ };
+ pwm-fan@0 {
+ reg = <0>;
+ compatible = "nuvoton,nct7802-fan";
+ };
+ dc-fan@1 {
+ reg = <1>;
+ compatible = "nuvoton,nct7802-fan";
+ dc;
+ invert;
+ open-drain;
+ };
+ peci@0 {
+ reg = <0>;
+ compatible = "nuvoton,nct7802-peci";
+ };
+};
--
1.9.1
reply other threads:[~2015-10-23 23:03 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1445641413-18662-1-git-send-email-const@makelinux.com \
--to=const@makelinux.com \
--cc=arnd@arndb.de \
--cc=devicetree@vger.kernel.org \
--cc=galak@codeaurora.org \
--cc=ijc+devicetree@hellion.org.uk \
--cc=jdelvare@suse.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=lm-sensors@lm-sensors.org \
--cc=mark.rutland@arm.com \
--cc=pawel.moll@arm.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).