From mboxrd@z Thu Jan 1 00:00:00 1970 From: Charles Keepax Subject: [PATCH v3 3/4] mfd: arizona: Remove bindings covered in new subsystem specific docs Date: Tue, 27 Oct 2015 16:01:58 +0000 Message-ID: <1445961719-1020-3-git-send-email-ckeepax@opensource.wolfsonmicro.com> References: <1445961719-1020-1-git-send-email-ckeepax@opensource.wolfsonmicro.com> Mime-Version: 1.0 Content-Type: text/plain Return-path: In-Reply-To: <1445961719-1020-1-git-send-email-ckeepax@opensource.wolfsonmicro.com> Sender: linux-kernel-owner@vger.kernel.org To: broonie@kernel.org, lee.jones@linaro.org, cw00.choi@samsung.com Cc: myungjoo.ham@samsung.com, lgirdwood@gmail.com, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, patches@opensource.wolfsonmicro.com List-Id: devicetree@vger.kernel.org Binding documentation has been added in new subsystem specific binding documents. This patch removes the now duplicate documentation from the MFD documentation. Signed-off-by: Charles Keepax --- Changes since v2: - No longer moving the core regulators into the regulator binding document, as they are properties of the device as a whole not just the regulators - Moved the maintainer updates into a seperate patch Lee, I have removed your ack because the patch has changed a fair amount. Apologies if this would not have been your preference. Thanks, Charles Documentation/devicetree/bindings/mfd/arizona.txt | 15 +++------------ 1 files changed, 3 insertions(+), 12 deletions(-) diff --git a/Documentation/devicetree/bindings/mfd/arizona.txt b/Documentation/devicetree/bindings/mfd/arizona.txt index a8fee60..18be0cb 100644 --- a/Documentation/devicetree/bindings/mfd/arizona.txt +++ b/Documentation/devicetree/bindings/mfd/arizona.txt @@ -44,7 +44,6 @@ Required properties: Optional properties: - wlf,reset : GPIO specifier for the GPIO controlling /RESET - - wlf,ldoena : GPIO specifier for the GPIO controlling LDOENA - wlf,gpio-defaults : A list of GPIO configuration register values. Defines for the appropriate values can found in . If @@ -67,21 +66,13 @@ Optional properties: present, the number of values should be less than or equal to the number of inputs, unspecified inputs will use the chip default. - - wlf,hpdet-channel : Headphone detection channel. - ARIZONA_ACCDET_MODE_HPL or 1 - Headphone detect mode is set to HPDETL - ARIZONA_ACCDET_MODE_HPR or 2 - Headphone detect mode is set to HPDETR - If this node is not mentioned or if the value is unknown, then - headphone detection mode is set to HPDETL. - - DCVDD-supply, MICVDD-supply : Power supplies, only need to be specified if they are being externally supplied. As covered in Documentation/devicetree/bindings/regulator/regulator.txt -Optional subnodes: - - ldo1 : Initial data for the LDO1 regulator, as covered in - Documentation/devicetree/bindings/regulator/regulator.txt - - micvdd : Initial data for the MICVDD regulator, as covered in - Documentation/devicetree/bindings/regulator/regulator.txt +Also see child specific device properties: + Regulator - ../regulator/arizona-regulator.txt + Extcon - ../extcon/extcon-arizona.txt Example: -- 1.7.2.5