devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Caesar Wang <wxt@rock-chips.com>
To: Heiko Stuebner <heiko@sntech.de>, Eduardo Valentin <edubezval@gmail.com>
Cc: linux-rockchip@lists.infradead.org,
	Caesar Wang <wxt@rock-chips.com>,
	devicetree@vger.kernel.org,
	Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
	Kumar Gala <galak@codeaurora.org>,
	linux-kernel@vger.kernel.org,
	Ian Campbell <ijc+devicetree@hellion.org.uk>,
	Rob Herring <robh+dt@kernel.org>, Pawel Moll <pawel.moll@arm.com>,
	Will Deacon <will.deacon@arm.com>,
	Mark Rutland <mark.rutland@arm.com>,
	Olof Johansson <olof@lixom.net>,
	Catalin Marinas <catalin.marinas@arm.com>,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH v1 5/6] arm64: dts: Add main Thermal info to rk3368.dtsi
Date: Thu, 29 Oct 2015 15:14:17 +0800	[thread overview]
Message-ID: <1446102858-10116-6-git-send-email-wxt@rock-chips.com> (raw)
In-Reply-To: <1446102858-10116-1-git-send-email-wxt@rock-chips.com>

This patch add the thermal needed info on RK3368.
Meanwhile, support the trips to throttle for thermal.

Signed-off-by: Caesar Wang <wxt@rock-chips.com>

---

Changes in v1:
- support the opt gpio pinctrl state

 arch/arm64/boot/dts/rockchip/rk3368.dtsi | 36 ++++++++++++++++++++++++++++++++
 1 file changed, 36 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3368.dtsi b/arch/arm64/boot/dts/rockchip/rk3368.dtsi
index cc093a4..7207293 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3368.dtsi
@@ -45,6 +45,7 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/thermal/thermal.h>
 
 / {
 	compatible = "rockchip,rk3368";
@@ -123,6 +124,8 @@
 			reg = <0x0 0x0>;
 			cpu-idle-states = <&cpu_sleep>;
 			enable-method = "psci";
+
+			#cooling-cells = <2>; /* min followed by max */
 		};
 
 		cpu_l1: cpu@1 {
@@ -155,6 +158,8 @@
 			reg = <0x0 0x100>;
 			cpu-idle-states = <&cpu_sleep>;
 			enable-method = "psci";
+
+			#cooling-cells = <2>; /* min followed by max */
 		};
 
 		cpu_b1: cpu@101 {
@@ -404,6 +409,27 @@
 		status = "disabled";
 	};
 
+	thermal-zones {
+		#include "rk3368-thermal.dtsi"
+	};
+
+	tsadc: tsadc@ff280000 {
+		compatible = "rockchip,rk3368-tsadc";
+		reg = <0x0 0xff280000 0x0 0x100>;
+		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>;
+		clock-names = "tsadc", "apb_pclk";
+		resets = <&cru SRST_TSADC>;
+		reset-names = "tsadc-apb";
+		pinctrl-names = "init", "default", "sleep";
+		pinctrl-0 = <&otp_gpio>;
+		pinctrl-1 = <&otp_out>;
+		pinctrl-2 = <&otp_gpio>;
+		#thermal-sensor-cells = <1>;
+		rockchip,hw-tshut-temp = <95000>;
+		status = "disabled";
+	};
+
 	gmac: ethernet@ff290000 {
 		compatible = "rockchip,rk3368-gmac";
 		reg = <0x0 0xff290000 0x0 0x10000>;
@@ -829,6 +855,16 @@
 			};
 		};
 
+		tsadc {
+			otp_out: otp-gpio {
+				rockchip,pins = <0 10 RK_FUNC_GPIO &pcfg_pull_none>;
+			};
+
+			otp_out: otp-out {
+				rockchip,pins = <0 10 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
 		uart0 {
 			uart0_xfer: uart0-xfer {
 				rockchip,pins = <2 24 RK_FUNC_1 &pcfg_pull_up>,
-- 
1.9.1

  parent reply	other threads:[~2015-10-29  7:14 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-10-29  7:14 [PATCH v1 0/6] Support the thermal for RK3368 SoCs Caesar Wang
2015-10-29  7:14 ` [PATCH v1 1/6] dt-bindings: rockchip-thermal: Support the RK3368 SoCs compatible Caesar Wang
2015-10-29  7:14 ` [PATCH v1 4/6] arm64: dts: Add the thermal data found on RK3368 Caesar Wang
2015-10-29  7:14 ` Caesar Wang [this message]
2015-10-29  7:14 ` [PATCH v1 6/6] arm64: dts: Enable the Thermal on R88 board Caesar Wang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1446102858-10116-6-git-send-email-wxt@rock-chips.com \
    --to=wxt@rock-chips.com \
    --cc=catalin.marinas@arm.com \
    --cc=devicetree@vger.kernel.org \
    --cc=edubezval@gmail.com \
    --cc=galak@codeaurora.org \
    --cc=heiko@sntech.de \
    --cc=ijc+devicetree@hellion.org.uk \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=mark.rutland@arm.com \
    --cc=olof@lixom.net \
    --cc=pawel.moll@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=will.deacon@arm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).