[PATCH v2 00/13] Add mipi dsi support for rk3288

[PATCH v2 00/13] Add mipi dsi support for rk3288

[Chris Zhong]

The rk3288 MIPI DSI is a Synopsys DesignWare MIPI DSI host controller
IP. This series adds support for a Synopsys DesignWare MIPI DSI host
controller DRM bridge driver and a rockchip MIPI DSI specific DRM
driver.

This series also includes a DRM panel driver for BOE TV080WUM-NL0 panel.
This panel only use the MIPI DSI video mode.

The MIPI DSI feature is tested on rk3288 evb board, backport them to
chrome os kernel v3.14, and it can display normally.

This patchset is base on the patchset from Ying.liu@freescale.com.
<http://www.spinics.net/lists/dri-devel/msg77181.html>


Changes in v2:
add the mipi clk id in a single patch
add vendor prefix for boe
As Thierry.Reding comment, add a documentation for this panel.

Chris Zhong (11):
  clk: rockchip: add id for mipidsi sclk on rk3288
  clk: rockchip: add mipidsi clocks on rk3288
  drm/rockchip: return a true clock rate to adjusted_mode
  drm/bridge: Add Synopsys DesignWare MIPI DSI host controller driver
  drm: rockchip: Support Synopsys DesignWare MIPI DSI host controller
  Documentation: dt-bindings: Add bindings for rk3288 DW MIPI DSI driver
  ARM: dts: rockchip: add rk3288 mipi_dsi nodes
  of: add vendor prefix for boe
  drm/panel: simple: Add support for BOE TV080WUM-NL0
  drm/panel: simple: Add simple panel device tree binding
  ARM: dts: rockchip: add support mipi panel tv080wum-nl0 for rk3288-evb

Liu Ying (2):
  drm/dsi: Add a helper to get bits per pixel of MIPI DSI pixel format
  Documentation: dt-bindings: Add bindings for Synopsys DW MIPI DSI DRM
    bridge driver

 .../devicetree/bindings/drm/bridge/dw_mipi_dsi.txt |   76 ++
 .../devicetree/bindings/panel/boe,tv080wum-nl0.txt |    7 +
 .../devicetree/bindings/vendor-prefixes.txt        |    1 +
 .../bindings/video/dw_mipi_dsi_rockchip.txt        |   56 ++
 arch/arm/boot/dts/rk3288-evb.dtsi                  |   20 +-
 arch/arm/boot/dts/rk3288.dtsi                      |   39 +
 drivers/clk/rockchip/clk-rk3288.c                  |    2 +-
 drivers/gpu/drm/bridge/Kconfig                     |    9 +
 drivers/gpu/drm/bridge/Makefile                    |    1 +
 drivers/gpu/drm/bridge/dw_mipi_dsi.c               | 1055 ++++++++++++++++++++
 drivers/gpu/drm/panel/panel-simple.c               |   33 +
 drivers/gpu/drm/rockchip/Kconfig                   |   10 +
 drivers/gpu/drm/rockchip/Makefile                  |    1 +
 drivers/gpu/drm/rockchip/dw_mipi_dsi_rockchip.c    |  249 +++++
 drivers/gpu/drm/rockchip/rockchip_drm_vop.c        |    9 +
 include/drm/bridge/dw_mipi_dsi.h                   |   27 +
 include/drm/drm_mipi_dsi.h                         |   14 +
 include/dt-bindings/clock/rk3288-cru.h             |    1 +
 18 files changed, 1608 insertions(+), 2 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/drm/bridge/dw_mipi_dsi.txt
 create mode 100644 Documentation/devicetree/bindings/panel/boe,tv080wum-nl0.txt
 create mode 100644 Documentation/devicetree/bindings/video/dw_mipi_dsi_rockchip.txt
 create mode 100644 drivers/gpu/drm/bridge/dw_mipi_dsi.c
 create mode 100644 drivers/gpu/drm/rockchip/dw_mipi_dsi_rockchip.c
 create mode 100644 include/drm/bridge/dw_mipi_dsi.h

-- 
2.6.2

[PATCH v2 01/13] clk: rockchip: add id for mipidsi sclk on rk3288

[Chris Zhong]

Adds a new id for the sclk supplying the mipidsi on rk3288 socs.

Signed-off-by: Chris Zhong <zyw@rock-chips.com>

---

Changes in v2:
add the mipi clk id in a single patch

 include/dt-bindings/clock/rk3288-cru.h | 1 +
 1 file changed, 1 insertion(+)

diff --git a/include/dt-bindings/clock/rk3288-cru.h b/include/dt-bindings/clock/rk3288-cru.h
index c719aac..b07cdd3 100644
--- a/include/dt-bindings/clock/rk3288-cru.h
+++ b/include/dt-bindings/clock/rk3288-cru.h
@@ -86,6 +86,7 @@
 #define SCLK_USBPHY480M_SRC	122
 #define SCLK_PVTM_CORE		123
 #define SCLK_PVTM_GPU		124
+#define SCLK_MIPI_24M		125
 
 #define SCLK_MAC		151
 #define SCLK_MACREF_OUT		152
-- 
2.6.2

[PATCH v2 05/13] Documentation: dt-bindings: Add bindings for Synopsys DW MIPI DSI DRM bridge driver

[Chris Zhong]

From: Liu Ying <Ying.liu@freescale.com>

This patch adds device tree bindings for Synopsys DesignWare MIPI DSI
host controller DRM bridge driver.

Signed-off-by: Liu Ying <Ying.Liu@freescale.com>
Signed-off-by: Chris Zhong <zyw@rock-chips.com>
---

Changes in v2: None

 .../devicetree/bindings/drm/bridge/dw_mipi_dsi.txt | 76 ++++++++++++++++++++++
 1 file changed, 76 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/drm/bridge/dw_mipi_dsi.txt

diff --git a/Documentation/devicetree/bindings/drm/bridge/dw_mipi_dsi.txt b/Documentation/devicetree/bindings/drm/bridge/dw_mipi_dsi.txt
new file mode 100644
index 0000000..bb87466
--- /dev/null
+++ b/Documentation/devicetree/bindings/drm/bridge/dw_mipi_dsi.txt
@@ -0,0 +1,76 @@
+Device-Tree bindings for Synopsys DesignWare MIPI DSI host controller
+
+The controller is a digital core that implements all protocol functions
+defined in the MIPI DSI specification, providing an interface between
+the system and the MIPI DPHY, and allowing communication with a MIPI DSI
+compliant display.
+
+Required properties:
+ - #address-cells: Should be <1>.
+ - #size-cells: Should be <0>.
+ - compatible: The first compatible string should be "fsl,imx6q-mipi-dsi"
+   for i.MX6q/sdl SoCs.  For other SoCs, please refer to their specific
+   device tree binding documentations.  A common compatible string
+   "snps,dw-mipi-dsi" should be appended for all SoCs.
+ - reg: Represent the physical address range of the controller.
+ - interrupts: Represent the controller's interrupt to the CPU(s).
+ - clocks, clock-names: Phandles to the controller's pll reference
+   clock(ref), configuration clock(cfg) and APB clock(pclk), as
+   described in [1].
+
+For more required properties, please refer to relevant device tree binding
+documentations which describe the controller embedded in specific SoCs.
+
+Required sub-nodes:
+ - A node to represent a DSI peripheral as described in [2].
+
+For more required sub-nodes, please refer to relevant device tree binding
+documentations which describe the controller embedded in specific SoCs.
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+[2] Documentation/devicetree/bindings/mipi/dsi/mipi-dsi-bus.txt
+
+example:
+	gpr: iomuxc-gpr@020e0000 {
+		/* ... */
+	};
+
+	mipi_dsi: mipi@021e0000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,imx6q-mipi-dsi", "snps,dw-mipi-dsi";
+		reg = <0x021e0000 0x4000>;
+		interrupts = <0 102 IRQ_TYPE_LEVEL_HIGH>;
+		gpr = <&gpr>;
+		clocks = <&clks IMX6QDL_CLK_MIPI_CORE_CFG>,
+			 <&clks IMX6QDL_CLK_MIPI_CORE_CFG>,
+			 <&clks IMX6QDL_CLK_MIPI_IPG>;
+		clock-names = "ref", "cfg", "pclk";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				mipi_mux_0: endpoint {
+					remote-endpoint = <&ipu1_di0_mipi>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				mipi_mux_1: endpoint {
+					remote-endpoint = <&ipu1_di1_mipi>;
+				};
+			};
+		};
+
+		panel {
+			compatible = "truly,tft480800-16-e-dsi";
+			reg = <0>;
+			/* ... */
+		};
+	};
-- 
2.6.2

Re: [PATCH v2 05/13] Documentation: dt-bindings: Add bindings for Synopsys DW MIPI DSI DRM bridge driver

[Rob Herring]

On Sat, Oct 31, 2015 at 08:56:01PM +0800, Chris Zhong wrote:
> From: Liu Ying <Ying.liu-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
> 
> This patch adds device tree bindings for Synopsys DesignWare MIPI DSI
> host controller DRM bridge driver.
> 
> Signed-off-by: Liu Ying <Ying.Liu-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
> Signed-off-by: Chris Zhong <zyw-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
> ---
> 
> Changes in v2: None
> 
>  .../devicetree/bindings/drm/bridge/dw_mipi_dsi.txt | 76 ++++++++++++++++++++++

Move to bindings/display/bridge/

>  1 file changed, 76 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/drm/bridge/dw_mipi_dsi.txt
> 
> diff --git a/Documentation/devicetree/bindings/drm/bridge/dw_mipi_dsi.txt b/Documentation/devicetree/bindings/drm/bridge/dw_mipi_dsi.txt
> new file mode 100644
> index 0000000..bb87466
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/drm/bridge/dw_mipi_dsi.txt
> @@ -0,0 +1,76 @@
> +Device-Tree bindings for Synopsys DesignWare MIPI DSI host controller
> +
> +The controller is a digital core that implements all protocol functions
> +defined in the MIPI DSI specification, providing an interface between
> +the system and the MIPI DPHY, and allowing communication with a MIPI DSI
> +compliant display.
> +
> +Required properties:
> + - #address-cells: Should be <1>.
> + - #size-cells: Should be <0>.
> + - compatible: The first compatible string should be "fsl,imx6q-mipi-dsi"
> +   for i.MX6q/sdl SoCs.  For other SoCs, please refer to their specific
> +   device tree binding documentations.  A common compatible string
> +   "snps,dw-mipi-dsi" should be appended for all SoCs.
> + - reg: Represent the physical address range of the controller.
> + - interrupts: Represent the controller's interrupt to the CPU(s).
> + - clocks, clock-names: Phandles to the controller's pll reference
> +   clock(ref), configuration clock(cfg) and APB clock(pclk), as
> +   described in [1].
> +
> +For more required properties, please refer to relevant device tree binding
> +documentations which describe the controller embedded in specific SoCs.
> +
> +Required sub-nodes:
> + - A node to represent a DSI peripheral as described in [2].
> +
> +For more required sub-nodes, please refer to relevant device tree binding
> +documentations which describe the controller embedded in specific SoCs.
> +
> +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
> +[2] Documentation/devicetree/bindings/mipi/dsi/mipi-dsi-bus.txt

This is now in bindings/display/mipi-dsi-bus.txt

> +
> +example:
> +	gpr: iomuxc-gpr@020e0000 {
> +		/* ... */
> +	};
> +
> +	mipi_dsi: mipi@021e0000 {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		compatible = "fsl,imx6q-mipi-dsi", "snps,dw-mipi-dsi";
> +		reg = <0x021e0000 0x4000>;
> +		interrupts = <0 102 IRQ_TYPE_LEVEL_HIGH>;
> +		gpr = <&gpr>;
> +		clocks = <&clks IMX6QDL_CLK_MIPI_CORE_CFG>,
> +			 <&clks IMX6QDL_CLK_MIPI_CORE_CFG>,
> +			 <&clks IMX6QDL_CLK_MIPI_IPG>;
> +		clock-names = "ref", "cfg", "pclk";
> +
> +		ports {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +
> +			port@0 {
> +				reg = <0>;
> +
> +				mipi_mux_0: endpoint {
> +					remote-endpoint = <&ipu1_di0_mipi>;
> +				};
> +			};
> +
> +			port@1 {
> +				reg = <1>;
> +
> +				mipi_mux_1: endpoint {
> +					remote-endpoint = <&ipu1_di1_mipi>;
> +				};
> +			};
> +		};
> +
> +		panel {
> +			compatible = "truly,tft480800-16-e-dsi";
> +			reg = <0>;
> +			/* ... */
> +		};
> +	};
> -- 
> 2.6.2
> 
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v2 08/13] Documentation: dt-bindings: Add bindings for rk3288 DW MIPI DSI driver

[Chris Zhong]

add device tree bindings for rk3288 specific Synopsys DW MIPI DSI driver

Signed-off-by: Chris Zhong <zyw@rock-chips.com>
---

Changes in v2: None

 .../bindings/video/dw_mipi_dsi_rockchip.txt        | 56 ++++++++++++++++++++++
 1 file changed, 56 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/video/dw_mipi_dsi_rockchip.txt

diff --git a/Documentation/devicetree/bindings/video/dw_mipi_dsi_rockchip.txt b/Documentation/devicetree/bindings/video/dw_mipi_dsi_rockchip.txt
new file mode 100644
index 0000000..4dea804
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/dw_mipi_dsi_rockchip.txt
@@ -0,0 +1,56 @@
+Rockchip specific extensions to the Synopsys Designware MIPI DSI
+================================
+
+Required properties:
+- compatible: "rockchip,rk3288-mipi-dsi", "snps,dw-mipi-dsi".
+- rockchip,grf: this soc should set GRF regs to mux vopl/vopb.
+- ports: contain a port node with endpoint definitions as defined in [1].
+  For vopb,set the reg = <0> and set the reg = <1> for vopl.
+
+For more required properties, please refer to [2].
+
+[1] Documentation/devicetree/bindings/media/video-interfaces.txt
+[2] Documentation/devicetree/bindings/drm/bridge/dw_mipi_dsi.txt
+
+Example:
+	mipi_dsi: mipi@ff960000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "rockchip,rk3288-mipi-dsi", "snps,dw-mipi-dsi";
+		reg = <0xff960000 0x4000>;
+		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_MIPI_24M>, <&cru PCLK_MIPI_DSI0>;
+		clock-names = "ref", "pclk";
+		rockchip,grf = <&grf>;
+		status = "okay";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			mipi_in: port {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				mipi_in_vopb: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&vopb_out_mipi>;
+				};
+				mipi_in_vopl: endpoint@1 {
+					reg = <1>;
+					remote-endpoint = <&vopl_out_mipi>;
+				};
+			};
+		};
+
+		panel {
+			compatible ="boe,tv080wum-nl0";
+			reg = <0>;
+
+			enable-gpios = <&gpio7 3 GPIO_ACTIVE_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&lcd_en>;
+			backlight = <&backlight>;
+			status = "okay";
+		};
+	};
-- 
2.6.2

Re: [PATCH v2 08/13] Documentation: dt-bindings: Add bindings for rk3288 DW MIPI DSI driver

[Rob Herring]

On Sat, Oct 31, 2015 at 08:56:04PM +0800, Chris Zhong wrote:
> add device tree bindings for rk3288 specific Synopsys DW MIPI DSI driver
> 
> Signed-off-by: Chris Zhong <zyw@rock-chips.com>
> ---
> 
> Changes in v2: None
> 
>  .../bindings/video/dw_mipi_dsi_rockchip.txt        | 56 ++++++++++++++++++++++
>  1 file changed, 56 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/video/dw_mipi_dsi_rockchip.txt
> 
> diff --git a/Documentation/devicetree/bindings/video/dw_mipi_dsi_rockchip.txt b/Documentation/devicetree/bindings/video/dw_mipi_dsi_rockchip.txt
> new file mode 100644
> index 0000000..4dea804
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/video/dw_mipi_dsi_rockchip.txt

Please move to bindings/display/rockchip/


> @@ -0,0 +1,56 @@
> +Rockchip specific extensions to the Synopsys Designware MIPI DSI
> +================================
> +
> +Required properties:
> +- compatible: "rockchip,rk3288-mipi-dsi", "snps,dw-mipi-dsi".
> +- rockchip,grf: this soc should set GRF regs to mux vopl/vopb.
> +- ports: contain a port node with endpoint definitions as defined in [1].
> +  For vopb,set the reg = <0> and set the reg = <1> for vopl.
> +
> +For more required properties, please refer to [2].
> +
> +[1] Documentation/devicetree/bindings/media/video-interfaces.txt
> +[2] Documentation/devicetree/bindings/drm/bridge/dw_mipi_dsi.txt

This needs to be updated too.

> +
> +Example:
> +	mipi_dsi: mipi@ff960000 {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		compatible = "rockchip,rk3288-mipi-dsi", "snps,dw-mipi-dsi";
> +		reg = <0xff960000 0x4000>;
> +		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
> +		clocks = <&cru SCLK_MIPI_24M>, <&cru PCLK_MIPI_DSI0>;
> +		clock-names = "ref", "pclk";
> +		rockchip,grf = <&grf>;
> +		status = "okay";
> +
> +		ports {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			reg = <1>;
> +
> +			mipi_in: port {
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				mipi_in_vopb: endpoint@0 {
> +					reg = <0>;
> +					remote-endpoint = <&vopb_out_mipi>;
> +				};
> +				mipi_in_vopl: endpoint@1 {
> +					reg = <1>;
> +					remote-endpoint = <&vopl_out_mipi>;
> +				};
> +			};
> +		};
> +
> +		panel {
> +			compatible ="boe,tv080wum-nl0";
> +			reg = <0>;
> +
> +			enable-gpios = <&gpio7 3 GPIO_ACTIVE_HIGH>;
> +			pinctrl-names = "default";
> +			pinctrl-0 = <&lcd_en>;
> +			backlight = <&backlight>;
> +			status = "okay";
> +		};
> +	};
> -- 
> 2.6.2
> 

[PATCH v2 10/13] of: add vendor prefix for boe

[Chris Zhong]

Signed-off-by: Chris Zhong <zyw@rock-chips.com>

---

Changes in v2:
add vendor prefix for boe

 Documentation/devicetree/bindings/vendor-prefixes.txt | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 8fb0590..404b798 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -33,6 +33,7 @@ auo	AU Optronics Corporation
 avago	Avago Technologies
 avic	Shanghai AVIC Optoelectronics Co., Ltd.
 axis	Axis Communications AB
+boe	BOE Technology Group Co., Ltd.
 bosch	Bosch Sensortec GmbH
 boundary	Boundary Devices Inc.
 brcm	Broadcom Corporation
-- 
2.6.2

Re: [PATCH v2 10/13] of: add vendor prefix for boe

[Rob Herring]

On Sat, Oct 31, 2015 at 7:56 AM, Chris Zhong <zyw-TNX95d0MmH7DzftRWevZcw@public.gmane.org> wrote:
> Signed-off-by: Chris Zhong <zyw-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
>

Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>

> ---
>
> Changes in v2:
> add vendor prefix for boe
>
>  Documentation/devicetree/bindings/vendor-prefixes.txt | 1 +
>  1 file changed, 1 insertion(+)
>
> diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
> index 8fb0590..404b798 100644
> --- a/Documentation/devicetree/bindings/vendor-prefixes.txt
> +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
> @@ -33,6 +33,7 @@ auo   AU Optronics Corporation
>  avago  Avago Technologies
>  avic   Shanghai AVIC Optoelectronics Co., Ltd.
>  axis   Axis Communications AB
> +boe    BOE Technology Group Co., Ltd.
>  bosch  Bosch Sensortec GmbH
>  boundary       Boundary Devices Inc.
>  brcm   Broadcom Corporation
> --
> 2.6.2
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v2 09/13] ARM: dts: rockchip: add rk3288 mipi_dsi nodes

[Chris Zhong]

Add a mipi_dsi node, and also add mipi_dsi endpoints to vopb and vopl
output port nodes.

Signed-off-by: Chris Zhong <zyw-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
---

Changes in v2: None

 arch/arm/boot/dts/rk3288.dtsi | 39 +++++++++++++++++++++++++++++++++++++++
 1 file changed, 39 insertions(+)

diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
index 6a79c9c..a5c5670 100644
--- a/arch/arm/boot/dts/rk3288.dtsi
+++ b/arch/arm/boot/dts/rk3288.dtsi
@@ -798,6 +798,10 @@
 				reg = <0>;
 				remote-endpoint = <&hdmi_in_vopb>;
 			};
+			vopb_out_mipi: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&mipi_in_vopb>;
+			};
 		};
 	};
 
@@ -831,6 +835,10 @@
 				reg = <0>;
 				remote-endpoint = <&hdmi_in_vopl>;
 			};
+			vopl_out_mipi: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&mipi_in_vopl>;
+			};
 		};
 	};
 
@@ -871,6 +879,37 @@
 		};
 	};
 
+	mipi_dsi: mipi@ff960000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "rockchip,rk3288-mipi-dsi", "snps,dw-mipi-dsi";
+		reg = <0xff960000 0x4000>;
+		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_MIPI_24M>, <&cru PCLK_MIPI_DSI0>;
+		clock-names = "ref", "pclk";
+		rockchip,grf = <&grf>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			mipi_in: port {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				mipi_in_vopb: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&vopb_out_mipi>;
+				};
+				mipi_in_vopl: endpoint@1 {
+					reg = <1>;
+					remote-endpoint = <&vopl_out_mipi>;
+				};
+			};
+		};
+	};
+
 	gic: interrupt-controller@ffc01000 {
 		compatible = "arm,gic-400";
 		interrupt-controller;
-- 
2.6.2

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v2 12/13] drm/panel: simple: Add simple panel device tree binding

[Chris Zhong]

This binding specifies a set of common properties for display panels. It
can be used as a basis by bindings for specific panels.
Bindings for three specific panels are provided to show how the
simple panel binding can be used.

Signed-off-by: Chris Zhong <zyw-TNX95d0MmH7DzftRWevZcw@public.gmane.org>

---

Changes in v2:
As Thierry.Reding comment, add a documentation for this panel.

 Documentation/devicetree/bindings/panel/boe,tv080wum-nl0.txt | 7 +++++++
 1 file changed, 7 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/panel/boe,tv080wum-nl0.txt

diff --git a/Documentation/devicetree/bindings/panel/boe,tv080wum-nl0.txt b/Documentation/devicetree/bindings/panel/boe,tv080wum-nl0.txt
new file mode 100644
index 0000000..50be5e2
--- /dev/null
+++ b/Documentation/devicetree/bindings/panel/boe,tv080wum-nl0.txt
@@ -0,0 +1,7 @@
+Boe Corporation 8.0" WUXGA TFT LCD panel
+
+Required properties:
+- compatible: should be "boe,tv080wum-nl0"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
-- 
2.6.2

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v2 12/13] drm/panel: simple: Add simple panel device tree binding

[Rob Herring]

On Sat, Oct 31, 2015 at 7:56 AM, Chris Zhong <zyw-TNX95d0MmH7DzftRWevZcw@public.gmane.org> wrote:

Your subject should be more specific with the panel name.

> This binding specifies a set of common properties for display panels. It
> can be used as a basis by bindings for specific panels.
> Bindings for three specific panels are provided to show how the
> simple panel binding can be used.
>
> Signed-off-by: Chris Zhong <zyw-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
>
> ---
>
> Changes in v2:
> As Thierry.Reding comment, add a documentation for this panel.
>
>  Documentation/devicetree/bindings/panel/boe,tv080wum-nl0.txt | 7 +++++++
>  1 file changed, 7 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/panel/boe,tv080wum-nl0.txt

Please move to bindings/display/panel/

>
> diff --git a/Documentation/devicetree/bindings/panel/boe,tv080wum-nl0.txt b/Documentation/devicetree/bindings/panel/boe,tv080wum-nl0.txt
> new file mode 100644
> index 0000000..50be5e2
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/panel/boe,tv080wum-nl0.txt
> @@ -0,0 +1,7 @@
> +Boe Corporation 8.0" WUXGA TFT LCD panel
> +
> +Required properties:
> +- compatible: should be "boe,tv080wum-nl0"
> +
> +This binding is compatible with the simple-panel binding, which is specified
> +in simple-panel.txt in this directory.
> --
> 2.6.2
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v2 12/13] drm/panel: simple: Add simple panel device tree binding

[Chris Zhong]

Hi Rob


On 11/02/2015 11:06 PM, Rob Herring wrote:
> On Sat, Oct 31, 2015 at 7:56 AM, Chris Zhong <zyw-TNX95d0MmH7DzftRWevZcw@public.gmane.org> wrote:
>
> Your subject should be more specific with the panel name.
I'll write more specific in subject next version.
>
>> This binding specifies a set of common properties for display panels. It
>> can be used as a basis by bindings for specific panels.
>> Bindings for three specific panels are provided to show how the
>> simple panel binding can be used.
>>
>> Signed-off-by: Chris Zhong <zyw-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
>>
>> ---
>>
>> Changes in v2:
>> As Thierry.Reding comment, add a documentation for this panel.
>>
>>   Documentation/devicetree/bindings/panel/boe,tv080wum-nl0.txt | 7 +++++++
>>   1 file changed, 7 insertions(+)
>>   create mode 100644 Documentation/devicetree/bindings/panel/boe,tv080wum-nl0.txt
> Please move to bindings/display/panel/
Okay.
>
>> diff --git a/Documentation/devicetree/bindings/panel/boe,tv080wum-nl0.txt b/Documentation/devicetree/bindings/panel/boe,tv080wum-nl0.txt
>> new file mode 100644
>> index 0000000..50be5e2
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/panel/boe,tv080wum-nl0.txt
>> @@ -0,0 +1,7 @@
>> +Boe Corporation 8.0" WUXGA TFT LCD panel
>> +
>> +Required properties:
>> +- compatible: should be "boe,tv080wum-nl0"
>> +
>> +This binding is compatible with the simple-panel binding, which is specified
>> +in simple-panel.txt in this directory.
>> --
>> 2.6.2
>>
>
>


--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v2 13/13] ARM: dts: rockchip: add support mipi panel tv080wum-nl0 for rk3288-evb

[Chris Zhong]

This tv080wum-nl0 panel is a mipi panel, it can use in MIPI_TX socket
of rk3288 evb board.

Signed-off-by: Chris Zhong <zyw@rock-chips.com>

---

Changes in v2: None

 arch/arm/boot/dts/rk3288-evb.dtsi | 20 +++++++++++++++++++-
 1 file changed, 19 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/rk3288-evb.dtsi b/arch/arm/boot/dts/rk3288-evb.dtsi
index f6d2e78..d04878f 100644
--- a/arch/arm/boot/dts/rk3288-evb.dtsi
+++ b/arch/arm/boot/dts/rk3288-evb.dtsi
@@ -47,7 +47,7 @@
 		reg = <0x0 0x80000000>;
 	};
 
-	backlight {
+	backlight: backlight {
 		compatible = "pwm-backlight";
 		brightness-levels = <
 			  0   1   2   3   4   5   6   7
@@ -177,6 +177,21 @@
 	status = "okay";
 };
 
+&mipi_dsi {
+	status = "okay";
+
+	panel {
+		compatible ="boe,tv080wum-nl0";
+		reg = <0>;
+
+		enable-gpios = <&gpio7 3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_en>;
+		backlight = <&backlight>;
+		status = "okay";
+	};
+};
+
 &sdmmc {
 	bus-width = <4>;
 	cap-mmc-highspeed;
@@ -247,6 +262,9 @@
 		bl_en: bl-en {
 			rockchip,pins = <7 2 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
+		lcd_en: lcd-en {
+			rockchip,pins = <7 3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
 	};
 
 	buttons {
-- 
2.6.2