From mboxrd@z Thu Jan 1 00:00:00 1970 From: Subject: [PATCH v13 5/6] ARM: socfpga: add bindings document for fpga bridge drivers Date: Tue, 3 Nov 2015 11:11:03 -0600 Message-ID: <1446570664-10293-6-git-send-email-atull@opensource.altera.com> References: <1446570664-10293-1-git-send-email-atull@opensource.altera.com> Mime-Version: 1.0 Content-Type: text/plain Return-path: In-Reply-To: <1446570664-10293-1-git-send-email-atull@opensource.altera.com> Sender: linux-kernel-owner@vger.kernel.org To: Rob Herring Cc: Moritz Fischer , Josh Cartwright , gregkh@linuxfoundation.org, monstr@monstr.eu, michal.simek@xilinx.com, Pawel Moll , Mark Rutland , Ian Campbell , Kumar Gala , Jonathan Corbet , linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, linux-doc@vger.kernel.org, pantelis.antoniou@konsulko.com, delicious.quinoa@gmail.com, dinguyen@opensource.altera.com, Alan Tull , Matthew Gerlach List-Id: devicetree@vger.kernel.org From: Alan Tull Add bindings documentation for Altera SOCFPGA bridges: * fpga2sdram * fpga2hps * hps2fpga * lwhps2fpga Signed-off-by: Alan Tull Signed-off-by: Matthew Gerlach Signed-off-by: Dinh Nguyen --- v2: separate into 2 documents for the 2 drivers v12: bump version to line up with simple-fpga-bus version remove Linux specific notes such as references to sysfs move non-DT specific documentation elsewhere remove bindings that would have been used to pass configuration clean up formatting v13: Remove 'label' property Change property from init-val to bridge-enable Fix email address --- .../bindings/fpga/altera-fpga2sdram-bridge.txt | 15 +++++++++++ .../bindings/fpga/altera-hps2fpga-bridge.txt | 31 ++++++++++++++++++++++ 2 files changed, 46 insertions(+) create mode 100644 Documentation/devicetree/bindings/fpga/altera-fpga2sdram-bridge.txt create mode 100644 Documentation/devicetree/bindings/fpga/altera-hps2fpga-bridge.txt diff --git a/Documentation/devicetree/bindings/fpga/altera-fpga2sdram-bridge.txt b/Documentation/devicetree/bindings/fpga/altera-fpga2sdram-bridge.txt new file mode 100644 index 0000000..81e2f06 --- /dev/null +++ b/Documentation/devicetree/bindings/fpga/altera-fpga2sdram-bridge.txt @@ -0,0 +1,15 @@ +Altera FPGA To SDRAM Bridge Driver + +Required properties: +- compatible : Should contain "altr,socfpga-fpga2sdram-bridge" + +Optional properties: +- bridge-enable : 0 if driver should disable bridge at startup + 1 if driver should enable bridge at startup + Default is to leave bridge in current state. + +Example: + fpga2sdram_br: fpgabridge@3 { + compatible = "altr,socfpga-fpga2sdram-bridge"; + bridge-enable = <0>; + }; diff --git a/Documentation/devicetree/bindings/fpga/altera-hps2fpga-bridge.txt b/Documentation/devicetree/bindings/fpga/altera-hps2fpga-bridge.txt new file mode 100644 index 0000000..67c28b0 --- /dev/null +++ b/Documentation/devicetree/bindings/fpga/altera-hps2fpga-bridge.txt @@ -0,0 +1,31 @@ +Altera FPGA/HPS Bridge Driver + +Required properties: +- compatible : Should contain one of: + "altr,socfpga-hps2fpga-bridge", + "altr,socfpga-lwhps2fpga-bridge", or + "altr,socfpga-fpga2hps-bridge" +- clocks : Clocks used by this module. + +Optional properties: +- bridge-enable : 0 if driver should disable bridge at startup. + 1 if driver should enable bridge at startup. + Default is to leave bridge in its current state. + +Example: + hps_fpgabridge0: fpgabridge@0 { + compatible = "altr,socfpga-hps2fpga-bridge"; + clocks = <&l4_main_clk>; + bridge-enable = <1>; + }; + + hps_fpgabridge1: fpgabridge@1 { + compatible = "altr,socfpga-lwhps2fpga-bridge"; + clocks = <&l4_main_clk>; + bridge-enable = <0>; + }; + + hps_fpgabridge2: fpgabridge@2 { + compatible = "altr,socfpga-fpga2hps-bridge"; + clocks = <&l4_main_clk>; + }; -- 1.9.1