[PATCH 1/7] doc:bindings:Add document for mfd hi665x PMIC

[Chen Feng <puck.chen-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org>]

Add document for mfd driver hi655x pmic driver

Signed-off-by: Chen Feng <puck.chen-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org>
Signed-off-by: Fei Wang <w.f-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
---
 .../devicetree/bindings/mfd/hisilicon,hi655x.txt       | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mfd/hisilicon,hi655x.txt

diff --git a/Documentation/devicetree/bindings/mfd/hisilicon,hi655x.txt b/Documentation/devicetree/bindings/mfd/hisilicon,hi655x.txt
new file mode 100644
index 0000000..afa2fa5
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/hisilicon,hi655x.txt
@@ -0,0 +1,18 @@
+Hisilicon hi655x Power Management Integrated Circuit (PMIC)
+
+Required properties:
+- compatible: Should be "hisilicon,hi655x-pmic-driver"
+- reg: Base address of PMIC on hi6220 soc
+- #interrupt-cells: Should be 2, two cells are needed for irq.
+- interrupt-controller: hi655x has internal IRQs (has own IRQ domain).
+- pmu_irq_gpio: should be &gpio_pmu_irq_n, is the IRQ gpio of hi655x.
+
+Example:
+	pmic: pmic@f8000000 {
+		compatible = "hisilicon,hi655x-pmic-driver";
+		reg = <0x0 0xf8000000 0x0 0x1000>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		pmic_gpios = <&gpio_pmu_irq_n>;
+		status = "okay";
+	}
-- 
1.9.1