From: Caesar Wang <wxt-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
To: Heiko Stuebner <heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org>,
Eduardo Valentin
<edubezval-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Cc: linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
lkp-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org,
Caesar Wang <wxt-TNX95d0MmH7DzftRWevZcw@public.gmane.org>,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Lorenzo Pieralisi
<lorenzo.pieralisi-5wv7dgnIgG8@public.gmane.org>,
Kumar Gala <galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Ian Campbell
<ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org>,
Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
Pawel Moll <pawel.moll-5wv7dgnIgG8@public.gmane.org>,
Will Deacon <will.deacon-5wv7dgnIgG8@public.gmane.org>,
Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
Olof Johansson <olof-nZhT3qVonbNeoWH0uzbU5w@public.gmane.org>,
Catalin Marinas <catalin.marinas-5wv7dgnIgG8@public.gmane.org>
Subject: [PATCH v4 09/10] arm64: dts: Add main Thermal info to rk3368.dtsi
Date: Mon, 9 Nov 2015 12:49:01 +0800 [thread overview]
Message-ID: <1447044542-30859-10-git-send-email-wxt@rock-chips.com> (raw)
In-Reply-To: <1447044542-30859-1-git-send-email-wxt-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
This patch add the thermal needed info on RK3368.
Meanwhile, support the trips to throttle for thermal.
Signed-off-by: Caesar Wang <wxt-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
Acked-by: Eduardo Valentin <edubezval-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
Changes in v4: None
Changes in v3: None
Changes in v2:
- fix a copy wrong name.
Changes in v1:
- support the opt gpio pinctrl state.
arch/arm64/boot/dts/rockchip/rk3368.dtsi | 36 ++++++++++++++++++++++++++++++++
1 file changed, 36 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3368.dtsi b/arch/arm64/boot/dts/rockchip/rk3368.dtsi
index cc093a4..83a2bd2 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3368.dtsi
@@ -45,6 +45,7 @@
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/thermal/thermal.h>
/ {
compatible = "rockchip,rk3368";
@@ -123,6 +124,8 @@
reg = <0x0 0x0>;
cpu-idle-states = <&cpu_sleep>;
enable-method = "psci";
+
+ #cooling-cells = <2>; /* min followed by max */
};
cpu_l1: cpu@1 {
@@ -155,6 +158,8 @@
reg = <0x0 0x100>;
cpu-idle-states = <&cpu_sleep>;
enable-method = "psci";
+
+ #cooling-cells = <2>; /* min followed by max */
};
cpu_b1: cpu@101 {
@@ -404,6 +409,27 @@
status = "disabled";
};
+ thermal-zones {
+ #include "rk3368-thermal.dtsi"
+ };
+
+ tsadc: tsadc@ff280000 {
+ compatible = "rockchip,rk3368-tsadc";
+ reg = <0x0 0xff280000 0x0 0x100>;
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>;
+ clock-names = "tsadc", "apb_pclk";
+ resets = <&cru SRST_TSADC>;
+ reset-names = "tsadc-apb";
+ pinctrl-names = "init", "default", "sleep";
+ pinctrl-0 = <&otp_gpio>;
+ pinctrl-1 = <&otp_out>;
+ pinctrl-2 = <&otp_gpio>;
+ #thermal-sensor-cells = <1>;
+ rockchip,hw-tshut-temp = <95000>;
+ status = "disabled";
+ };
+
gmac: ethernet@ff290000 {
compatible = "rockchip,rk3368-gmac";
reg = <0x0 0xff290000 0x0 0x10000>;
@@ -829,6 +855,16 @@
};
};
+ tsadc {
+ otp_gpio: otp-gpio {
+ rockchip,pins = <0 10 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ otp_out: otp-out {
+ rockchip,pins = <0 10 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
uart0 {
uart0_xfer: uart0-xfer {
rockchip,pins = <2 24 RK_FUNC_1 &pcfg_pull_up>,
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2015-11-09 4:49 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-11-09 4:48 [PATCH v4 00/10] Better compatible for the rockchip thermal and support RK3368 SoCs Caesar Wang
[not found] ` <1447044542-30859-1-git-send-email-wxt-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
2015-11-09 4:48 ` [PATCH v4 01/10] dt-bindings: rockchip-thermal: Support the RK3368 SoCs compatible Caesar Wang
2015-11-09 4:49 ` [PATCH v4 08/10] arm64: dts: Add the thermal data found on RK3368 Caesar Wang
2015-11-09 4:49 ` Caesar Wang [this message]
2015-11-09 4:49 ` [PATCH v4 10/10] arm64: dts: Enable the Thermal on R88 board Caesar Wang
2015-11-12 18:29 ` [PATCH v4 00/10] Better compatible for the rockchip thermal and support RK3368 SoCs Eduardo Valentin
2015-11-12 18:31 ` Eduardo Valentin
[not found] ` <20151112183119.GA5289-bi+AKbBUZKY6gyzm1THtWbp2dZbC/Bob@public.gmane.org>
2015-11-21 16:41 ` Heiko Stuebner
2015-11-12 22:14 ` Heiko Stuebner
2015-11-14 6:31 ` Caesar Wang
[not found] ` <20151112182950.GB4361-bi+AKbBUZKY6gyzm1THtWbp2dZbC/Bob@public.gmane.org>
2015-11-14 6:30 ` Caesar Wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1447044542-30859-10-git-send-email-wxt@rock-chips.com \
--to=wxt-tnx95d0mmh7dzftrwevzcw@public.gmane.org \
--cc=catalin.marinas-5wv7dgnIgG8@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=edubezval-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
--cc=heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org \
--cc=ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=lkp-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org \
--cc=lorenzo.pieralisi-5wv7dgnIgG8@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=olof-nZhT3qVonbNeoWH0uzbU5w@public.gmane.org \
--cc=pawel.moll-5wv7dgnIgG8@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=will.deacon-5wv7dgnIgG8@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).