From: Zhong Kaihua <zhongkaihua-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
To: robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
pawel.moll-5wv7dgnIgG8@public.gmane.org,
mark.rutland-5wv7dgnIgG8@public.gmane.org,
ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org,
galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org,
catalin.marinas-5wv7dgnIgG8@public.gmane.org,
will.deacon-5wv7dgnIgG8@public.gmane.org,
xuwei5-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org,
tyler.baker-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
bintian.wang-hv44wF8Li93QT0dZR+AlfA@public.gmane.org,
haojian.zhuang-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
xuyiping-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org,
arnd-r2nGTMty4D4@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: w.f-hv44wF8Li93QT0dZR+AlfA@public.gmane.org,
dan.zhao-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org,
zhongkaihua-hv44wF8Li93QT0dZR+AlfA@public.gmane.org,
kkojima-ugdvmXx6nUh3+QwDJ9on6Q@public.gmane.org,
suzhuangluan-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org,
puck.chen-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org,
kong.kongxinwei-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org
Subject: [PATCH V2 1/2] dt-bindings: spi: Documentation for Hi6220 spi driver
Date: Thu, 19 Nov 2015 16:37:08 +0800 [thread overview]
Message-ID: <1447922229-60552-1-git-send-email-zhongkaihua@huawei.com> (raw)
dt-bindings: spi: Documentation for Hi6220 spi driver
Signed-off-by: Zhong Kaihua <zhongkaihua-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
---
.../devicetree/bindings/spi/spi-hi6220.txt | 45 ++++++++++++++++++++++
1 file changed, 45 insertions(+)
create mode 100644 Documentation/devicetree/bindings/spi/spi-hi6220.txt
diff --git a/Documentation/devicetree/bindings/spi/spi-hi6220.txt b/Documentation/devicetree/bindings/spi/spi-hi6220.txt
new file mode 100644
index 0000000..91aa169
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-hi6220.txt
@@ -0,0 +1,45 @@
+Hi6220 SPI controller
+
+Required properties:
+- compatible : "arm,pl022", "arm,primecell"
+- reg : Offset and length of the register set for the device
+- interrupts : Should contain SPI controller interrupt
+- num-cs : total number of chipselects
+
+Required Board Specific Properties:
+
+- #address-cells: should be 1.
+- #size-cells: should be 0.
+
+Optional properties:
+- cs-gpios : should specify GPIOs used for chipselects.
+ The gpios will be referred to as reg = <index> in the SPI child nodes.
+ If unspecified, a single SPI device without a chip select can be used.
+- dmas : Two or more DMA channel specifiers following the convention outlined
+ in bindings/dma/dma.txt
+- dma-names: Names for the dma channels, if present. There must be at
+ least one channel named "tx" for transmit and named "rx" for
+ receive.
+
+Example:
+ spi_0: spi@f7106000 {
+ compatible = "arm,pl022", "arm,primecell";
+ reg = <0x0 0xf7106000 0x0 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <0 50 4>;
+ bus-id = <0>;
+ enable-dma = <1>;
+ dmas = <&dma0 12 &dma0 13>;
+ dma-names = "rx", "tx";
+
+ clocks = <&clock_sys HI6220_SPI_CLK>;
+ clock-names = "apb_pclk";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_pmx_func &spi0_cfg_func>;
+ num-cs = <4>;
+ cs-gpios = <&gpio6 2 0>, <&gpio6 3 0>, <&gpio6 4 0>, <&gpio6 5 0>;
+
+ status = "ok";
+ };
+
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next reply other threads:[~2015-11-19 8:37 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-11-19 8:37 Zhong Kaihua [this message]
2015-11-19 8:37 ` [PATCH V2 2/2] arm64: dts: add Hi6220 spi configuration nodes Zhong Kaihua
[not found] ` <1447922229-60552-1-git-send-email-zhongkaihua-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
2015-11-20 15:39 ` [PATCH V2 1/2] dt-bindings: spi: Documentation for Hi6220 spi driver Rob Herring
2015-12-29 8:29 ` 答复: " zhongkaihua
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1447922229-60552-1-git-send-email-zhongkaihua@huawei.com \
--to=zhongkaihua-hv44wf8li93qt0dzr+alfa@public.gmane.org \
--cc=arnd-r2nGTMty4D4@public.gmane.org \
--cc=bintian.wang-hv44wF8Li93QT0dZR+AlfA@public.gmane.org \
--cc=catalin.marinas-5wv7dgnIgG8@public.gmane.org \
--cc=dan.zhao-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
--cc=haojian.zhuang-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org \
--cc=kkojima-ugdvmXx6nUh3+QwDJ9on6Q@public.gmane.org \
--cc=kong.kongxinwei-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=pawel.moll-5wv7dgnIgG8@public.gmane.org \
--cc=puck.chen-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=suzhuangluan-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org \
--cc=tyler.baker-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=w.f-hv44wF8Li93QT0dZR+AlfA@public.gmane.org \
--cc=will.deacon-5wv7dgnIgG8@public.gmane.org \
--cc=xuwei5-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org \
--cc=xuyiping-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox