From: Geert Uytterhoeven <geert+renesas-gXvu3+zWzMSzQB+pC5nmwQ@public.gmane.org>
To: Greg Kroah-Hartman
<gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r@public.gmane.org>,
Simon Horman <horms-/R6kz+dDXgpPR4JQBCEnsQ@public.gmane.org>,
Magnus Damm <magnus.damm-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
Yoshinori Sato
<ysato-Rn4VEauK+AKRv+LV9MX5uooqe+aC9MnS@public.gmane.org>,
Laurent Pinchart
<laurent.pinchart+renesas-ryLnwIuWjnjg/C1BVhZhaw@public.gmane.org>
Cc: linux-serial-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-sh-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Geert Uytterhoeven
<geert+renesas-gXvu3+zWzMSzQB+pC5nmwQ@public.gmane.org>
Subject: [PATCH v2 01/16] serial: sh-sci: Drop the interface clock
Date: Thu, 19 Nov 2015 19:35:58 +0100 [thread overview]
Message-ID: <1447958173-543-2-git-send-email-geert+renesas@glider.be> (raw)
In-Reply-To: <1447958173-543-1-git-send-email-geert+renesas-gXvu3+zWzMSzQB+pC5nmwQ@public.gmane.org>
From: Laurent Pinchart <laurent.pinchart+renesas-ryLnwIuWjnjg/C1BVhZhaw@public.gmane.org>
As no platform defines an interface clock the SCI driver always falls
back to a clock named "peripheral_clk".
- On SH platforms that clock is the base clock for the SCI functional
clock and has the same frequency,
- On ARM platforms that clock doesn't exist, and clk_get() will return
the default clock for the device.
We can thus make the functional clock mandatory and drop the interface
clock.
EPROBE_DEFER is handled for clocks that may be referenced from DT (i.e.
"fck" and deprecated "sci_ick").
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas-ryLnwIuWjnjg/C1BVhZhaw@public.gmane.org>
Acked-by: Simon Horman <horms+renesas-/R6kz+dDXgpPR4JQBCEnsQ@public.gmane.org>
[geert: Handle EPROBE_DEFER, reformat description, break long comment line]
Signed-off-by: Geert Uytterhoeven <geert+renesas-gXvu3+zWzMSzQB+pC5nmwQ@public.gmane.org>
---
v2:
- Add Acked-by,
- Amendment by geert.
---
.../bindings/serial/renesas,sci-serial.txt | 4 +-
drivers/tty/serial/sh-sci.c | 64 ++++++++++++++--------
2 files changed, 43 insertions(+), 25 deletions(-)
diff --git a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt
index 73f825e5e6448815..2c9e6b8477e92792 100644
--- a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt
+++ b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt
@@ -42,7 +42,7 @@ Required properties:
- clocks: Must contain a phandle and clock-specifier pair for each entry
in clock-names.
- - clock-names: Must contain "sci_ick" for the SCIx UART interface clock.
+ - clock-names: Must contain "fck" for the SCIx UART functional clock.
Note: Each enabled SCIx UART should have an alias correctly numbered in the
"aliases" node.
@@ -63,7 +63,7 @@ Example:
interrupt-parent = <&gic>;
interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7790_CLK_SCIFA0>;
- clock-names = "sci_ick";
+ clock-names = "fck";
dmas = <&dmac0 0x21>, <&dmac0 0x22>;
dma-names = "tx", "rx";
};
diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index 51c7507b0444957b..3c908804cab1c88c 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -92,8 +92,6 @@ struct sci_port {
struct timer_list break_timer;
int break_flag;
- /* Interface clock */
- struct clk *iclk;
/* Function clock */
struct clk *fclk;
@@ -457,9 +455,8 @@ static void sci_port_enable(struct sci_port *sci_port)
pm_runtime_get_sync(sci_port->port.dev);
- clk_prepare_enable(sci_port->iclk);
- sci_port->port.uartclk = clk_get_rate(sci_port->iclk);
clk_prepare_enable(sci_port->fclk);
+ sci_port->port.uartclk = clk_get_rate(sci_port->fclk);
}
static void sci_port_disable(struct sci_port *sci_port)
@@ -476,7 +473,6 @@ static void sci_port_disable(struct sci_port *sci_port)
sci_port->break_flag = 0;
clk_disable_unprepare(sci_port->fclk);
- clk_disable_unprepare(sci_port->iclk);
pm_runtime_put_sync(sci_port->port.dev);
}
@@ -1622,7 +1618,7 @@ static int sci_notifier(struct notifier_block *self,
struct uart_port *port = &sci_port->port;
spin_lock_irqsave(&port->lock, flags);
- port->uartclk = clk_get_rate(sci_port->iclk);
+ port->uartclk = clk_get_rate(sci_port->fclk);
spin_unlock_irqrestore(&port->lock, flags);
}
@@ -2241,6 +2237,42 @@ static struct uart_ops sci_uart_ops = {
#endif
};
+static int sci_init_clocks(struct sci_port *sci_port, struct device *dev)
+{
+ /* Get the SCI functional clock. It's called "fck" on ARM. */
+ sci_port->fclk = clk_get(dev, "fck");
+ if (PTR_ERR(sci_port->fclk) == -EPROBE_DEFER)
+ return -EPROBE_DEFER;
+ if (!IS_ERR(sci_port->fclk))
+ return 0;
+
+ /*
+ * But it used to be called "sci_ick", and we need to maintain DT
+ * backward compatibility.
+ */
+ sci_port->fclk = clk_get(dev, "sci_ick");
+ if (PTR_ERR(sci_port->fclk) == -EPROBE_DEFER)
+ return -EPROBE_DEFER;
+ if (!IS_ERR(sci_port->fclk))
+ return 0;
+
+ /* SH has historically named the clock "sci_fck". */
+ sci_port->fclk = clk_get(dev, "sci_fck");
+ if (!IS_ERR(sci_port->fclk))
+ return 0;
+
+ /*
+ * Not all SH platforms declare a clock lookup entry for SCI devices,
+ * in which case we need to get the global "peripheral_clk" clock.
+ */
+ sci_port->fclk = clk_get(dev, "peripheral_clk");
+ if (!IS_ERR(sci_port->fclk))
+ return 0;
+
+ dev_err(dev, "failed to get functional clock\n");
+ return PTR_ERR(sci_port->fclk);
+}
+
static int sci_init_single(struct platform_device *dev,
struct sci_port *sci_port, unsigned int index,
struct plat_sci_port *p, bool early)
@@ -2333,22 +2365,9 @@ static int sci_init_single(struct platform_device *dev,
sci_port->sampling_rate = p->sampling_rate;
if (!early) {
- sci_port->iclk = clk_get(&dev->dev, "sci_ick");
- if (IS_ERR(sci_port->iclk)) {
- sci_port->iclk = clk_get(&dev->dev, "peripheral_clk");
- if (IS_ERR(sci_port->iclk)) {
- dev_err(&dev->dev, "can't get iclk\n");
- return PTR_ERR(sci_port->iclk);
- }
- }
-
- /*
- * The function clock is optional, ignore it if we can't
- * find it.
- */
- sci_port->fclk = clk_get(&dev->dev, "sci_fck");
- if (IS_ERR(sci_port->fclk))
- sci_port->fclk = NULL;
+ ret = sci_init_clocks(sci_port, &dev->dev);
+ if (ret < 0)
+ return ret;
port->dev = &dev->dev;
@@ -2405,7 +2424,6 @@ static int sci_init_single(struct platform_device *dev,
static void sci_cleanup_single(struct sci_port *port)
{
- clk_put(port->iclk);
clk_put(port->fclk);
pm_runtime_disable(port->port.dev);
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next parent reply other threads:[~2015-11-19 18:35 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1447958173-543-1-git-send-email-geert+renesas@glider.be>
[not found] ` <1447958173-543-1-git-send-email-geert+renesas-gXvu3+zWzMSzQB+pC5nmwQ@public.gmane.org>
2015-11-19 18:35 ` Geert Uytterhoeven [this message]
2015-11-20 16:27 ` [PATCH v2 01/16] serial: sh-sci: Drop the interface clock Rob Herring
2015-12-13 6:42 ` Greg Kroah-Hartman
2015-12-14 8:15 ` Simon Horman
[not found] ` <20151214081540.GD9929-/R6kz+dDXgpPR4JQBCEnsQ@public.gmane.org>
2015-12-14 8:16 ` Simon Horman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1447958173-543-2-git-send-email-geert+renesas@glider.be \
--to=geert+renesas-gxvu3+zwzmszqb+pc5nmwq@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r@public.gmane.org \
--cc=horms-/R6kz+dDXgpPR4JQBCEnsQ@public.gmane.org \
--cc=laurent.pinchart+renesas-ryLnwIuWjnjg/C1BVhZhaw@public.gmane.org \
--cc=linux-serial-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-sh-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=magnus.damm-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=ysato-Rn4VEauK+AKRv+LV9MX5uooqe+aC9MnS@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).