devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Andrew F. Davis" <afd@ti.com>
To: Rob Herring <robh+dt@kernel.org>, Pawel Moll <pawel.moll@arm.com>,
	Mark Rutland <mark.rutland@arm.com>,
	Ian Campbell <ijc+devicetree@hellion.org.uk>,
	Kumar Gala <galak@codeaurora.org>,
	Linus Walleij <linus.walleij@linaro.org>,
	Alexandre Courbot <gnurou@gmail.com>,
	Samuel Ortiz <sameo@linux.intel.com>,
	Lee Jones <lee.jones@linaro.org>,
	Liam Girdwood <lgirdwood@gmail.com>,
	Mark Brown <broonie@kernel.org>
Cc: devicetree@vger.kernel.org, linux-gpio@vger.kernel.org,
	linux-kernel@vger.kernel.org, "Andrew F. Davis" <afd@ti.com>
Subject: [PATCH v4 4/4] gpio: tps65086: Add GPO driver for the TPS65086 PMIC
Date: Thu, 19 Nov 2015 17:01:42 -0600	[thread overview]
Message-ID: <1447974102-24938-5-git-send-email-afd@ti.com> (raw)
In-Reply-To: <1447974102-24938-1-git-send-email-afd@ti.com>

Add support for the TPS65086 PMIC GPOs.

TPS65086 has four configurable GPOs that can be used for several
purposes. These are output only.

Signed-off-by: Andrew F. Davis <afd@ti.com>
---
 drivers/gpio/Kconfig         |   6 ++
 drivers/gpio/Makefile        |   1 +
 drivers/gpio/gpio-tps65086.c | 144 +++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 151 insertions(+)
 create mode 100644 drivers/gpio/gpio-tps65086.c

diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index b18bea0..f357a2e 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -838,6 +838,12 @@ config GPIO_TIMBERDALE
 	---help---
 	Add support for the GPIO IP in the timberdale FPGA.
 
+config GPIO_TPS65086
+	tristate "TI TPS65086 GPO"
+	depends on MFD_TPS65086
+	help
+	  This driver supports the GPO on TI TPS65086x PMICs.
+
 config GPIO_TPS6586X
 	bool "TPS6586X GPIO"
 	depends on MFD_TPS6586X
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 986dbd8..fd98126 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -95,6 +95,7 @@ obj-$(CONFIG_GPIO_TC3589X)	+= gpio-tc3589x.o
 obj-$(CONFIG_ARCH_TEGRA)	+= gpio-tegra.o
 obj-$(CONFIG_GPIO_TIMBERDALE)	+= gpio-timberdale.o
 obj-$(CONFIG_GPIO_PALMAS)	+= gpio-palmas.o
+obj-$(CONFIG_GPIO_TPS65086)	+= gpio-tps65086.o
 obj-$(CONFIG_GPIO_TPS6586X)	+= gpio-tps6586x.o
 obj-$(CONFIG_GPIO_TPS65910)	+= gpio-tps65910.o
 obj-$(CONFIG_GPIO_TPS65912)	+= gpio-tps65912.o
diff --git a/drivers/gpio/gpio-tps65086.c b/drivers/gpio/gpio-tps65086.c
new file mode 100644
index 0000000..22bd796
--- /dev/null
+++ b/drivers/gpio/gpio-tps65086.c
@@ -0,0 +1,144 @@
+/*
+ * Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * Author: Andrew F. Davis <afd@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether expressed or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License version 2 for more details.
+ *
+ * Based on the TPS65912 driver
+ */
+
+#include <linux/gpio.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include <linux/mfd/tps65086.h>
+
+struct tps65086_gpio {
+	struct gpio_chip chip;
+	struct tps65086 *tps;
+};
+
+static inline struct tps65086_gpio *to_tps65086_gpio(struct gpio_chip *chip)
+{
+	return container_of(chip, struct tps65086_gpio, chip);
+}
+
+static int tps65086_gpio_get_direction(struct gpio_chip *chip,
+				       unsigned offset)
+{
+	return GPIOF_DIR_OUT;
+}
+
+static int tps65086_gpio_direction_input(struct gpio_chip *chip,
+					 unsigned offset)
+{
+	/* This device is output only */
+	return -EINVAL;
+}
+
+static int tps65086_gpio_direction_output(struct gpio_chip *chip,
+					unsigned offset, int value)
+{
+	struct tps65086_gpio *gpio = to_tps65086_gpio(chip);
+
+	/* Set the initial value */
+	regmap_update_bits(gpio->tps->regmap, TPS65086_GPOCTRL,
+			   BIT(4 + offset), value ? BIT(4 + offset) : 0);
+
+	return 0;
+}
+
+static int tps65086_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+	struct tps65086_gpio *gpio = to_tps65086_gpio(chip);
+	int ret, val;
+
+	ret = regmap_read(gpio->tps->regmap, TPS65086_GPOCTRL, &val);
+	if (ret < 0)
+		return ret;
+
+	return val & BIT(4 + offset);
+}
+
+static void tps65086_gpio_set(struct gpio_chip *chip, unsigned offset,
+			      int value)
+{
+	struct tps65086_gpio *gpio = to_tps65086_gpio(chip);
+
+	regmap_update_bits(gpio->tps->regmap, TPS65086_GPOCTRL,
+			   BIT(4 + offset), value ? BIT(4 + offset) : 0);
+}
+
+static struct gpio_chip template_chip = {
+	.label			= "tps65086-gpio",
+	.owner			= THIS_MODULE,
+	.get_direction		= tps65086_gpio_get_direction,
+	.direction_input	= tps65086_gpio_direction_input,
+	.direction_output	= tps65086_gpio_direction_output,
+	.get			= tps65086_gpio_get,
+	.set			= tps65086_gpio_set,
+	.base			= -1,
+	.ngpio			= 4,
+	.can_sleep		= true,
+};
+
+static int tps65086_gpio_probe(struct platform_device *pdev)
+{
+	struct tps65086_gpio *gpio;
+	int ret;
+
+	gpio = devm_kzalloc(&pdev->dev, sizeof(*gpio), GFP_KERNEL);
+	if (!gpio)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, gpio);
+
+	gpio->tps = dev_get_drvdata(pdev->dev.parent);
+	gpio->chip = template_chip;
+	gpio->chip.dev = gpio->tps->dev;
+
+	ret = gpiochip_add(&gpio->chip);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Could not register gpiochip, %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int tps65086_gpio_remove(struct platform_device *pdev)
+{
+	struct tps65086_gpio *gpio = platform_get_drvdata(pdev);
+
+	gpiochip_remove(&gpio->chip);
+
+	return 0;
+}
+
+static const struct platform_device_id tps65086_gpio_id_table[] = {
+	{ "tps65086-gpio", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(platform, tps65086_gpio_id_table);
+
+static struct platform_driver tps65086_gpio_driver = {
+	.driver = {
+		.name = "tps65086-gpio",
+	},
+	.probe = tps65086_gpio_probe,
+	.remove = tps65086_gpio_remove,
+	.id_table = tps65086_gpio_id_table,
+};
+module_platform_driver(tps65086_gpio_driver);
+
+MODULE_AUTHOR("Andrew F. Davis <afd@ti.com>");
+MODULE_DESCRIPTION("TPS65086 GPIO driver");
+MODULE_LICENSE("GPL v2");
-- 
1.9.1

  parent reply	other threads:[~2015-11-19 23:01 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-11-19 23:01 [PATCH v4 0/4] Add support for the TI TPS65086 PMIC Andrew F. Davis
2015-11-19 23:01 ` [PATCH v4 1/4] Documentation: tps65086: Add DT bindings for the " Andrew F. Davis
2015-11-20 16:33   ` Rob Herring
2015-11-23 16:09   ` Lee Jones
2015-11-19 23:01 ` [PATCH v4 2/4] mfd: tps65086: Add driver " Andrew F. Davis
2015-11-23 16:20   ` Lee Jones
2015-11-19 23:01 ` [PATCH v4 3/4] regulator: tps65086: Add regulator " Andrew F. Davis
2015-11-21 13:37   ` Mark Brown
2015-11-21 20:40     ` Andrew F. Davis
2015-11-22 13:13       ` Mark Brown
2015-11-23 17:40         ` Andrew F. Davis
2015-11-23 19:00           ` Mark Brown
2015-11-23 19:18             ` Andrew F. Davis
2015-11-24 12:11               ` Mark Brown
2015-11-19 23:01 ` Andrew F. Davis [this message]
     [not found]   ` <1447974102-24938-5-git-send-email-afd-l0cyMroinI0@public.gmane.org>
2015-11-30  8:50     ` [PATCH v4 4/4] gpio: tps65086: Add GPO " Linus Walleij

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1447974102-24938-5-git-send-email-afd@ti.com \
    --to=afd@ti.com \
    --cc=broonie@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=galak@codeaurora.org \
    --cc=gnurou@gmail.com \
    --cc=ijc+devicetree@hellion.org.uk \
    --cc=lee.jones@linaro.org \
    --cc=lgirdwood@gmail.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=pawel.moll@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=sameo@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).