From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jisheng Zhang Subject: [PATCH v2 6/6] arm64: dts: berlin4ct: add pll and clock nodes Date: Fri, 20 Nov 2015 16:42:32 +0800 Message-ID: <1448008952-1787-7-git-send-email-jszhang@marvell.com> References: <1448008952-1787-1-git-send-email-jszhang@marvell.com> Mime-Version: 1.0 Content-Type: text/plain Return-path: In-Reply-To: <1448008952-1787-1-git-send-email-jszhang@marvell.com> Sender: linux-kernel-owner@vger.kernel.org To: robh+dt@kernel.org, pawel.moll@arm.com, mark.rutland@arm.com, ijc+devicetree@hellion.org.uk, galak@codeaurora.org, catalin.marinas@arm.com, will.deacon@arm.com, mturquette@baylibre.com, sboyd@codeaurora.org, sebastian.hesselbarth@gmail.com, antoine.tenart@free-electrons.com Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-clk@vger.kernel.org, Jisheng Zhang List-Id: devicetree@vger.kernel.org Add syspll, mempll, cpupll, gateclk and berlin-clk nodes. Signed-off-by: Jisheng Zhang --- arch/arm64/boot/dts/marvell/berlin4ct.dtsi | 38 ++++++++++++++++++++++++++++++ 1 file changed, 38 insertions(+) diff --git a/arch/arm64/boot/dts/marvell/berlin4ct.dtsi b/arch/arm64/boot/dts/marvell/berlin4ct.dtsi index a4a1876..808a997 100644 --- a/arch/arm64/boot/dts/marvell/berlin4ct.dtsi +++ b/arch/arm64/boot/dts/marvell/berlin4ct.dtsi @@ -42,6 +42,7 @@ * OTHER DEALINGS IN THE SOFTWARE. */ +#include #include / { @@ -135,6 +136,22 @@ interrupts = ; }; + cpupll: cpupll { + compatible = "marvell,berlin-pll"; + reg = <0x922000 0x14>, <0xea0710 4>; + #clock-cells = <0>; + clocks = <&osc>, <&clk CLK_CPUFASTREF>; + bypass-shift = /bits/ 8 <2>; + }; + + mempll: mempll { + compatible = "marvell,berlin-pll"; + reg = <0x940034 0x14>, <0xea0710 4>; + #clock-cells = <0>; + clocks = <&osc>, <&clk CLK_MEMFASTREF>; + bypass-shift = /bits/ 8 <1>; + }; + apb@e80000 { compatible = "simple-bus"; #address-cells = <1>; @@ -225,6 +242,27 @@ }; }; + syspll: syspll { + compatible = "marvell,berlin-pll"; + reg = <0xea0200 0x14>, <0xea0710 4>; + #clock-cells = <0>; + clocks = <&osc>; + bypass-shift = /bits/ 8 <0>; + }; + + gateclk: gateclk { + compatible = "marvell,berlin4ct-gateclk"; + reg = <0xea0700 4>; + #clock-cells = <1>; + }; + + clk: clk { + compatible = "marvell,berlin4ct-clk"; + reg = <0xea0720 0x144>; + #clock-cells = <1>; + clocks = <&syspll>; + }; + soc_pinctrl: pin-controller@ea8000 { compatible = "marvell,berlin4ct-soc-pinctrl"; reg = <0xea8000 0x14>; -- 2.6.2