From mboxrd@z Thu Jan 1 00:00:00 1970 From: Sebastian Hesselbarth Subject: [PATCH 3/4] ARM: dt: mvebu: ix4-300d: Cleanup NAND partition ranges Date: Sat, 28 Nov 2015 12:14:07 +0100 Message-ID: <1448709248-21177-4-git-send-email-sebastian.hesselbarth@gmail.com> References: <1448709248-21177-1-git-send-email-sebastian.hesselbarth@gmail.com> Return-path: In-Reply-To: <1448709248-21177-1-git-send-email-sebastian.hesselbarth@gmail.com> Sender: linux-kernel-owner@vger.kernel.org To: Sebastian Hesselbarth Cc: Jason Cooper , Andrew Lunn , Gregory Clement , Rob Herring , Pawel Moll , Mark Rutland , Ian Campbell , Kumar Gala , Russell King , Benoit Masson , linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org List-Id: devicetree@vger.kernel.org Prefix all partition reg properties to 32-bit to ease readability. While at it, also remove a stale x in front of boot partition offset and make some upper-case hex numbers lower-case. Signed-off-by: Sebastian Hesselbarth --- Cc: Jason Cooper Cc: Andrew Lunn Cc: Gregory Clement Cc: Rob Herring Cc: Pawel Moll Cc: Mark Rutland Cc: Ian Campbell Cc: Kumar Gala Cc: Russell King Cc: Benoit Masson Cc: linux-arm-kernel@lists.infradead.org Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org --- arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts index 76781fd18624..13cf69a8d0fb 100644 --- a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts +++ b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts @@ -157,35 +157,35 @@ partition@0 { label = "u-boot"; - reg = <0x0000000 0xe0000>; + reg = <0x00000000 0x000e0000>; read-only; }; partition@e0000 { label = "u-boot-env"; - reg = <0xe0000 0x20000>; + reg = <0x000e0000 0x00020000>; read-only; }; partition@100000 { label = "u-boot-env2"; - reg = <0x100000 0x20000>; + reg = <0x00100000 0x00020000>; read-only; }; partition@120000 { label = "zImage"; - reg = <0x120000 0x400000>; + reg = <0x00120000 0x00400000>; }; partition@520000 { label = "initrd"; - reg = <0x520000 0x400000>; + reg = <0x00520000 0x00400000>; }; - partition@xE00000 { + partition@e00000 { label = "boot"; - reg = <0xE00000 0x3F200000>; + reg = <0x00e00000 0x3f200000>; }; }; }; -- 2.1.4