From: Jiancheng Xue <xuejiancheng-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
To: robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
pawel.moll-5wv7dgnIgG8@public.gmane.org,
mark.rutland-5wv7dgnIgG8@public.gmane.org,
ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org,
galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org,
mturquette-rdvid1DuHRBWk0Htik3J/w@public.gmane.org,
sboyd-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org,
linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org,
khilman-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
arnd-r2nGTMty4D4@public.gmane.org,
olof-nZhT3qVonbNeoWH0uzbU5w@public.gmane.org,
xuwei5-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org,
haojian.zhuang-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
zhangfei.gao-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
bintian.wang-hv44wF8Li93QT0dZR+AlfA@public.gmane.org,
vinod.koul-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-clk-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
dmaengine-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
yanhaifeng-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org,
yanghongwei-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org,
suwenping-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org,
ml.yang-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org,
gaofei-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org,
Jiancheng Xue
<xuejiancheng-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
Subject: [PATCH v2 0/9] ARM: hisi: enable hi3519 soc
Date: Thu, 3 Dec 2015 10:29:14 +0800 [thread overview]
Message-ID: <1449109754-23309-1-git-send-email-xuejiancheng@huawei.com> (raw)
Hello,
Hi3519 soc is mainly used for ip camera and sport DV solutions. This patchset adds initial support
for Hi3519 soc. It includes clock driver, arch configuration, device tree and debug uart configuration.
It has been tested on hi3519 reference board.
Spi-nor flash driver and other peripheral drivers will be submitted later.
Any comments will be appreciated!
Thanks!
Change Log
----------
v2:
-Rebase to v4.4-rc3
-Put dt-binding doc and header file in a separate patch.
-Delete unused clocks definitions.
-Adjust the ARCH_xxx order in Kconfig file
-Rename ARCH_HI3xxx to ARCH_36xx
Jiancheng Xue (9):
clk: hi3519: add dt-binding document and header file
clk: hi3519: add CRG driver for hisilicon hi3519 soc
ARM: hisi: enable Hi3519 soc
ARM: dts: add dts files for hi3519-demb board
ARM: config: enable ARCH_HI3519
ARM: debug: add Hi3519 debug uart
ARM: hisi: rename ARCH_HI3xxx to ARCH_HI36xx
clk: hisilicon: rename ARCH_HI3xxx to ARCH_HI36xx
dmaengine: Kconfig: rename ARCH_HI3xxx to ARCH_HI36xx
.../devicetree/bindings/clock/hi3519-crg.txt | 46 +++++++
arch/arm/Kconfig.debug | 14 +-
arch/arm/boot/dts/Makefile | 4 +-
arch/arm/boot/dts/hi3519-demb.dts | 55 ++++++++
arch/arm/boot/dts/hi3519.dtsi | 129 ++++++++++++++++++
arch/arm/configs/hisi_defconfig | 3 +-
arch/arm/configs/multi_v7_defconfig | 2 +-
arch/arm/mach-hisi/Kconfig | 11 +-
arch/arm/mach-hisi/hisilicon.c | 9 ++
drivers/clk/hisilicon/Makefile | 3 +-
drivers/clk/hisilicon/clk-hi3519.c | 100 ++++++++++++++
drivers/clk/hisilicon/reset.c | 149 +++++++++++++++++++++
drivers/clk/hisilicon/reset.h | 25 ++++
drivers/dma/Kconfig | 2 +-
include/dt-bindings/clock/hi3519-clock.h | 51 +++++++
15 files changed, 595 insertions(+), 8 deletions(-)
create mode 100644 Documentation/devicetree/bindings/clock/hi3519-crg.txt
create mode 100644 arch/arm/boot/dts/hi3519-demb.dts
create mode 100644 arch/arm/boot/dts/hi3519.dtsi
create mode 100644 drivers/clk/hisilicon/clk-hi3519.c
create mode 100644 drivers/clk/hisilicon/reset.c
create mode 100644 drivers/clk/hisilicon/reset.h
create mode 100644 include/dt-bindings/clock/hi3519-clock.h
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
reply other threads:[~2015-12-03 2:29 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1449109754-23309-1-git-send-email-xuejiancheng@huawei.com \
--to=xuejiancheng-hv44wf8li93qt0dzr+alfa@public.gmane.org \
--cc=arnd-r2nGTMty4D4@public.gmane.org \
--cc=bintian.wang-hv44wF8Li93QT0dZR+AlfA@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=dmaengine-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
--cc=gaofei-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org \
--cc=haojian.zhuang-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org \
--cc=khilman-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-clk-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=ml.yang-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org \
--cc=mturquette-rdvid1DuHRBWk0Htik3J/w@public.gmane.org \
--cc=olof-nZhT3qVonbNeoWH0uzbU5w@public.gmane.org \
--cc=pawel.moll-5wv7dgnIgG8@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=sboyd-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
--cc=suwenping-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org \
--cc=vinod.koul-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org \
--cc=xuwei5-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org \
--cc=yanghongwei-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org \
--cc=yanhaifeng-C8/M+/jPZTeaMJb+Lgu22Q@public.gmane.org \
--cc=zhangfei.gao-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).