From: Jiancheng Xue <xuejiancheng@huawei.com>
To: robh+dt@kernel.org, pawel.moll@arm.com, mark.rutland@arm.com,
ijc+devicetree@hellion.org.uk, galak@codeaurora.org,
linux@arm.linux.org.uk, khilman@linaro.org, arnd@arndb.de,
olof@lixom.net, xuwei5@hisilicon.com, haojian.zhuang@linaro.org,
zhangfei.gao@linaro.org, bintian.wang@huawei.com
Cc: suwenping@hisilicon.com, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, yanhaifeng@hisilicon.com,
Jiancheng Xue <xuejiancheng@huawei.com>,
gaofei@hisilicon.com, ml.yang@hisilicon.com,
yanghongwei@hisilicon.com, linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 4/9] ARM: dts: add dts files for hi3519-demb board
Date: Thu, 3 Dec 2015 10:44:28 +0800 [thread overview]
Message-ID: <1449110668-23647-1-git-send-email-xuejiancheng@huawei.com> (raw)
add dts files for hi3519-demb board
Signed-off-by: Jiancheng Xue <xuejiancheng@huawei.com>
---
arch/arm/boot/dts/Makefile | 2 +
arch/arm/boot/dts/hi3519-demb.dts | 55 ++++++++++++++++
arch/arm/boot/dts/hi3519.dtsi | 129 ++++++++++++++++++++++++++++++++++++++
3 files changed, 186 insertions(+)
create mode 100644 arch/arm/boot/dts/hi3519-demb.dts
create mode 100644 arch/arm/boot/dts/hi3519.dtsi
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 30bbc37..39ad947 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -133,6 +133,8 @@ dtb-$(CONFIG_ARCH_EXYNOS5) += \
exynos5440-sd5v1.dtb \
exynos5440-ssdk5440.dtb \
exynos5800-peach-pi.dtb
+dtb-$(CONFIG_ARCH_HI3519) += \
+ hi3519-demb.dtb
dtb-$(CONFIG_ARCH_HI3xxx) += \
hi3620-hi4511.dtb
dtb-$(CONFIG_ARCH_HIX5HD2) += \
diff --git a/arch/arm/boot/dts/hi3519-demb.dts b/arch/arm/boot/dts/hi3519-demb.dts
new file mode 100644
index 0000000..c7a1720
--- /dev/null
+++ b/arch/arm/boot/dts/hi3519-demb.dts
@@ -0,0 +1,55 @@
+/*
+ * Copyright (c) 2015 HiSilicon Technologies Co., Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+/dts-v1/;
+#include "hi3519.dtsi"
+
+/ {
+ model = "HiSilicon HI3519 DEMO Board";
+ compatible = "hisilicon,hi3519";
+
+ chosen {
+ bootargs = "mem=64M console=ttyAMA0,115200 early_printk \
+root=/dev/mtdblock2 rootfstype=jffs2 \
+mtdparts=hi_sfc:1M(boot),4M(kernel),11M(rootfs)";
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0>;
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x40000000>;
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&dual_timer0 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/hi3519.dtsi b/arch/arm/boot/dts/hi3519.dtsi
new file mode 100644
index 0000000..32f08e6
--- /dev/null
+++ b/arch/arm/boot/dts/hi3519.dtsi
@@ -0,0 +1,129 @@
+/*
+ * Copyright (c) 2015 HiSilicon Technologies Co., Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+#include "skeleton.dtsi"
+#include <dt-bindings/clock/hi3519-clock.h>
+/ {
+ aliases {
+ serial0 = &uart0;
+ };
+
+ gic: interrupt-controller@10300000 {
+ compatible = "arm,cortex-a7-gic";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0x10301000 0x1000>, <0x10302000 0x1000>;
+ };
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ interrupt-parent = <&gic>;
+ ranges;
+
+ amba {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "arm,amba-bus";
+ ranges;
+
+ uart0: uart@12100000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x12100000 0x1000>;
+ interrupts = <0 4 4>;
+ clocks = <&crg HI3519_UART0_CLK>;
+ clock-names = "apb_pclk";
+ status = "disable";
+ };
+
+ uart1: uart@12101000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x12101000 0x1000>;
+ interrupts = <0 5 4>;
+ clocks = <&crg HI3519_UART1_CLK>;
+ clock-names = "apb_pclk";
+ status = "disable";
+ };
+
+ uart2: uart@12102000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x12102000 0x1000>;
+ interrupts = <0 6 4>;
+ clocks = <&crg HI3519_UART2_CLK>;
+ clock-names = "apb_pclk";
+ status = "disable";
+ };
+
+ uart3: uart@12103000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x12103000 0x1000>;
+ interrupts = <0 7 4>;
+ clocks = <&crg HI3519_UART3_CLK>;
+ clock-names = "apb_pclk";
+ status = "disable";
+ };
+
+ uart4: uart@12104000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x12104000 0x1000>;
+ interrupts = <0 8 4>;
+ clocks = <&crg HI3519_UART4_CLK>;
+ clock-names = "apb_pclk";
+ status = "disable";
+ };
+
+ dual_timer0: dual_timer@12000000 {
+ compatible = "arm,sp804", "arm,primecell";
+ interrupts = <0 64 4>, <0 65 4>;
+ reg = <0x12000000 0x1000>;
+ clocks = <&crg HI3519_FIXED_3M>;
+ status = "disable";
+ };
+
+ dual_timer1: dual_timer@12001000 {
+ compatible = "arm,sp804", "arm,primecell";
+ interrupts = <0 66 4>, <0 67 4>;
+ reg = <0x12001000 0x1000>;
+ clocks = <&crg HI3519_FIXED_3M>;
+ status = "disable";
+ };
+
+ dual_timer2: dual_timer@12002000 {
+ compatible = "arm,sp804", "arm,primecell";
+ interrupts = <0 68 4>, <0 69 4>;
+ reg = <0x12002000 0x1000>;
+ clocks = <&crg HI3519_FIXED_3M>;
+ status = "disable";
+ };
+ };
+
+ sysctrl: system-controller@12020000 {
+ compatible = "hisilicon,sysctrl";
+ reg = <0x12020000 0x1000>;
+ reboot-offset = <0x4>;
+ };
+
+ crg: crg@12010000 {
+ compatible = "hisilicon,hi3519-crg";
+ #clock-cells = <1>;
+ #reset-cells = <2>;
+ reg = <0x12010000 0x10000>;
+ };
+ };
+};
--
1.9.1
next reply other threads:[~2015-12-03 2:44 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-12-03 2:44 Jiancheng Xue [this message]
[not found] ` <1449110668-23647-1-git-send-email-xuejiancheng-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
2015-12-03 9:36 ` [PATCH v2 4/9] ARM: dts: add dts files for hi3519-demb board Arnd Bergmann
2015-12-04 2:27 ` xuejiancheng
2015-12-04 10:49 ` Arnd Bergmann
2015-12-07 6:37 ` xuejiancheng
2015-12-08 3:28 ` zhangfei
[not found] ` <56652912.80308-hv44wF8Li93QT0dZR+AlfA@public.gmane.org>
2015-12-08 3:54 ` xuejiancheng
2015-12-09 15:31 ` Arnd Bergmann
2015-12-10 6:32 ` xuejiancheng
2015-12-10 8:04 ` Arnd Bergmann
2015-12-10 8:59 ` xuejiancheng
2015-12-10 9:13 ` Arnd Bergmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1449110668-23647-1-git-send-email-xuejiancheng@huawei.com \
--to=xuejiancheng@huawei.com \
--cc=arnd@arndb.de \
--cc=bintian.wang@huawei.com \
--cc=devicetree@vger.kernel.org \
--cc=galak@codeaurora.org \
--cc=gaofei@hisilicon.com \
--cc=haojian.zhuang@linaro.org \
--cc=ijc+devicetree@hellion.org.uk \
--cc=khilman@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=mark.rutland@arm.com \
--cc=ml.yang@hisilicon.com \
--cc=olof@lixom.net \
--cc=pawel.moll@arm.com \
--cc=robh+dt@kernel.org \
--cc=suwenping@hisilicon.com \
--cc=xuwei5@hisilicon.com \
--cc=yanghongwei@hisilicon.com \
--cc=yanhaifeng@hisilicon.com \
--cc=zhangfei.gao@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).