From: Mingkai Hu <Mingkai.Hu@freescale.com>
To: arm@kernel.org
Cc: devicetree@vger.kernel.org, Mingkai Hu <Mingkai.Hu@freescale.com>,
leoli@freescale.com, linux-arm-kernel@lists.infradead.org,
Minghuan Lian <Minghuan.Lian@freescale.com>
Subject: [PATCH v2] dts/ls2080a: Update PCIe compatible
Date: Fri, 4 Dec 2015 18:20:17 +0800 [thread overview]
Message-ID: <1449224417-20753-1-git-send-email-Mingkai.Hu@freescale.com> (raw)
From: Minghuan Lian <Minghuan.Lian@freescale.com>
The patch adds LS2085a to PCIe compatible to fix the compatibility
issue when using firmware with LS2085a compatible property.
Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com>
Signed-off-by: Mingkai Hu <Mingkai.Hu@freescale.com>
---
v2 change:
- Rebased to latest kernel base
Documentation/devicetree/bindings/pci/layerscape-pci.txt | 1 +
arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi | 12 ++++++++----
2 files changed, 9 insertions(+), 4 deletions(-)
diff --git a/Documentation/devicetree/bindings/pci/layerscape-pci.txt b/Documentation/devicetree/bindings/pci/layerscape-pci.txt
index e376785..4600007 100644
--- a/Documentation/devicetree/bindings/pci/layerscape-pci.txt
+++ b/Documentation/devicetree/bindings/pci/layerscape-pci.txt
@@ -15,6 +15,7 @@ Required properties:
- compatible: should contain the platform identifier such as:
"fsl,ls1021a-pcie", "snps,dw-pcie"
"fsl,ls2080a-pcie", "snps,dw-pcie"
+ "fsl,ls2085a-pcie", "snps,dw-pcie"
- reg: base addresses and lengths of the PCIe controller
- interrupts: A list of interrupt outputs of the controller. Must contain an
entry for each entry in the interrupt-names property.
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
index e81cd48..3821bb1 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
@@ -383,7 +383,8 @@
};
pcie@3400000 {
- compatible = "fsl,ls2080a-pcie", "snps,dw-pcie";
+ compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie",
+ "snps,dw-pcie";
reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */
0x10 0x00000000 0x0 0x00002000>; /* configuration space */
reg-names = "regs", "config";
@@ -406,7 +407,8 @@
};
pcie@3500000 {
- compatible = "fsl,ls2080a-pcie", "snps,dw-pcie";
+ compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie",
+ "snps,dw-pcie";
reg = <0x00 0x03500000 0x0 0x00100000 /* controller registers */
0x12 0x00000000 0x0 0x00002000>; /* configuration space */
reg-names = "regs", "config";
@@ -429,7 +431,8 @@
};
pcie@3600000 {
- compatible = "fsl,ls2080a-pcie", "snps,dw-pcie";
+ compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie",
+ "snps,dw-pcie";
reg = <0x00 0x03600000 0x0 0x00100000 /* controller registers */
0x14 0x00000000 0x0 0x00002000>; /* configuration space */
reg-names = "regs", "config";
@@ -452,7 +455,8 @@
};
pcie@3700000 {
- compatible = "fsl,ls2080a-pcie", "snps,dw-pcie";
+ compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie",
+ "snps,dw-pcie";
reg = <0x00 0x03700000 0x0 0x00100000 /* controller registers */
0x16 0x00000000 0x0 0x00002000>; /* configuration space */
reg-names = "regs", "config";
--
2.1.0.27.g96db324
next reply other threads:[~2015-12-04 10:20 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-12-04 10:20 Mingkai Hu [this message]
[not found] ` <1449224417-20753-1-git-send-email-Mingkai.Hu-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
2015-12-04 16:22 ` [PATCH v2] dts/ls2080a: Update PCIe compatible Rob Herring
2015-12-07 8:44 ` Hu Vincent
[not found] ` <BY2PR03MB3169DD34DF302BCF7A60FF284090-+7O3WWA3DPuCr+ldVt6je+O6mTEJWrR4XA4E9RH9d+qIuWR1G4zioA@public.gmane.org>
2016-01-18 8:09 ` Li Yang
2015-12-15 2:01 ` Hu Vincent
[not found] ` <BY2PR03MB3160E6BF80C63C5DF0AB91F84EE0-+7O3WWA3DPuCr+ldVt6je+O6mTEJWrR4XA4E9RH9d+qIuWR1G4zioA@public.gmane.org>
2015-12-15 2:02 ` Scott Wood
2015-12-15 2:05 ` Hu Vincent
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1449224417-20753-1-git-send-email-Mingkai.Hu@freescale.com \
--to=mingkai.hu@freescale.com \
--cc=Minghuan.Lian@freescale.com \
--cc=arm@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=leoli@freescale.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).